156 modeli
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sick of auto bed leveling issues? The MAXPROBE backplate fixes them for good. Your printer should have come from Creality like this. Features Easy to install - takes just 10 minutes, no cutting wires or soldering needed Uses all original…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
One of my son's friends has gotten into D&D recently, so I made a bunch of remixes of my models to be a little more D&D compatible, then printed them out and am giving them to him for his birthday. I figured that I could go ahead and…
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
Modified parts for https://www.thingiverse.com/thing:1568198: SirHa_Kurbel2.stl -> PNU_handle_grip.stl. Cut an edge to the top and bottom plate as at least my printer can't print circles in air Gehäuse_2_a1.stl ->…
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
The original thingiverse post (https://www.thingiverse.com/thing:4723570 ) had an amazing model by the user Kuro ( https://www.thingiverse.com/kuro2/designs ). The main issues are that the model files are not split, making it harder to…
Use organic supports and support blocker
Cross Brace: There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side. I moved the fan mount location to the corner, rather than the middle. This allowed for the addition…
My own remix set of great City Streets collection designed by Michal Fanta I wanted to expand the original collection with some new parts. For now, this "remix collection" includes: Water Culvert One piece Big Roundabouts Big Roundabout…
Because my children always broke off the plates when playing, I provided the corresponding parts with little thicker walls. The upper opening was more accurately adapted to the head. I also removed the gap on the right shoulder of the…
This is a collection of 3 different Maxis style stock parts. Most of these parts fit interchangeably for preference. You can print most of these anywhere between 15% and 100% infill for the desired durability/cost ratio you prefer. None…
A few remixes of the original xbox rubber feet. NOT FOR COMMERCIAL SALE! Category: Video Games
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
You probably printed already "Cat toy playing board pegs play" and your cat figured it out pretty well or you have more than one cat and the board is simply to small for both of them. Then you need this collection of extensions and…
Źródło oznaczyło ten model jako treść 18+.
Overview of Resolved Issues from the Original Design The screw holes on the bottom left of the boxes are too large in the original V1 and V2 designs. M3 screws can be inserted and removed with slight pressure. The left side of the…
This was remixed from 3D_Toys's The Claw Grabber II (Print & Play) I split the file for two color printing. I have a lot more designs so be sure to check them all out and follow me here at Polymathic Designs . Post your makes of this, I…
Message me if anything needs changing or write in comments
I added a third channel for an extra hair tie to keep cards from coming out of the wrong side on accident. One note about this…there are two versions. One version if you want to pull cards out using the cutout, and another version if you…
V0 Stealth Skirts Mods and Fixes The original mod is in VoronUser repo . At the time of writing these fixes and mods are available in this pull request at Maverick-3D's repo pending to be merged. Only the parts that was changed are…
Use a M5 allen bolt and nut for the shoulder support. You can add a soft bottom protector (optional) printed in TPU with the following ORCA parameters: Wall loop = 1, Top and bottom shell layer = 0.Infill Giroide 20% and glue it whit…
It's a Remix of Frank Deschners Spice Rack. The design was nice but i was missing something. So i decided to remix his design. Made it a littlebit smaller and stackable. This Version is unlimited Stackable. Limits only by physics. And it…
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Knife Sharpening Tool - Best of remixes Designed 2021-05-16 thing:4860228 printables:249523-knife-sharpening-tool-best-of-remixes TOC Knife Sharpening Tool - Best of remixes TOC Description BOM Sharpening Tips Buy me a coffee? Description…
Funnel for plastic water bottles works well for protien powders, lemonade powder, or anything else you might want to add to a water bottle.
This is a UL funnel designed to be inserted into a standard plastic bottle and eas the use of adding performance drink mixes. It is printed in TPU with a brim, the brim helps act as a nice seal so no need to remove it. WARNING: I am…
identical to the original model but with a plus A buckle designed for easy replacement of a broken one without the need to unstitch your bag. Simple to print and assemble. Recommended materials: ASA or PETG. Supports are required –…
This design takes imo the best parts of gmelikov, Lok and 3Doodler's remixes of Qaz's amazing original to create one which strongly grips onto the win max 2 with the qol features of the other remixes. I've read a lot of comments about the…
I slightly increased the distance between the rollers on the Y-gantry, so the 2020 rail fits better. I also made two of the holes in the lower gantry plate bigger for eccentric nuts, like in the upper plate. Also added a mount for my…
Based on the design of the “ Modular Drawers for IKEA Kallax ” by KILO , I created longer versions to fill up the entire depth of a Kallax pocket. Also, there seems to be a critical part missing in his Printable, which I added here, see…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
Three new remixes for Panel 1 of the Geodesic Dome Cat House . Enjoy! Please see the original design for other panels and schematics.
Introduction At the request of some members, I am providing a 'clean Leaf' so that you can work on your projects and make modifications. You can find all the necessary information in the main project: Modular Storage Tree The only part…
Note: There is an updated listing with a newer version of this remix: https://www.printables.com/model/415298-lowrider-3-cnc-three-remixes-of-rail-blocks-181-mm Also note: Several of my designs for my CNC plasma rig are available here for…
While printing ProfessorBoots truck I encountered some small issues which this remix fixes: A small hole would appear in the back of the headlight bowls when slicing in Bambu, I've added a small chamfer to the inside end of the headlight…
Fix the design and modify the numbers
Simple design and easy to use, i needed more control over the strip sizes due to different bottle thickness The width of the cut depends on the thickness of the bottle wall, as a general rule: Thickness Width 0.2mm 10mm 0.25mm 9mm 0.3mm…
Note: Several of my designs for my CNC plasma rig are available here for free. I had created a couple of different remixes of the LowRider v3 rail blocks (Y rail mounts), one for my router based LR3 (#1 — 23.4 mm), and another one for my…
A series of experimental BCAR remixes for the EX BCAR system. Many of these are untested. All are set at the 12.8mm squish setting except for CXCAR3-12-8_12-9, which goes from 12.8 to 12.9. The ones with increasing numbers are progressive…
Źródło oznaczyło ten model jako treść 18+.
Layer height: 0.12 or 0.2 Supports: yes
Cantoneira 3 encaixes, com corte de 3mm, ideal para criar uma proteção para a impressora 3D. Medidas: 70x70x36
Several variations with Fusion 360 CAD file for more remixing.
Here's a funny and functional piece of wall art for your shop or utility closet! Print Settings: 0.2mm layers, 3 walls, 10% infill, 5 bottom layers, 5 top layers, no supports With 0.2mm layer height - change filament color at 1.6mm height…
Fixes for some Brother MFC combos. Mine is an MFC-L8390CDW, a recent model for which the below problems are encountered by several users. The stopper prevent the guide from shifting during the scanning of many A4 pages, which often cause…
Entirely reparametrized the original .STL file by @Mikester for the top part (card-wallet-top.stl) to get a proper NURBS geometry editable .STEP file . Closed the viewing hole to create a blank surface for further personalized REMIXES.
I've had some requests for human versions of a few of my models, so I figured that I'd go ahead and put them together and post them in this one thing. As I make additional close-to-human characters, I'll humanize them and add them here!…
This is an oversized version of the original filament sensor lever. It allows you to trim itback as needed to get it to work perfectly for your printers tolerances. The following video shows how the sensor works and I used this design mod…
Cantoneira inferior 97x97mm, utilizada para criar estufa para impressora 3D.
Źródło oznaczyło ten model jako treść 18+.
I think the Quick Connect system created by @Jack, to connect PTFE tube, deserves more deployments, so with his blessing, I made STEP files for just "Single Plate" and "Single Block" that are the perfect starting point for any remixes or…
Can be used to merge with other existing models to add a peg to attach it to a Küpper pegboard.
These are some remixes I made for the Trivictus EasiestSCAR. https://www.thingiverse.com/thing:4967719 1: I made a Hexagonal version of the SCAR 2: For each SCAR variant, I made a version that uses a tightening plate and 2 4-40 screws…
SELLING MACHINEEEEEEEEEEE
halloween tree I'm kinda being silly but I thought I'd take a stab at a “ fixed” remix of the original. Technically the hollow original might be handy for resin printing but your slicer software can do that too. I think that cleaning…
Got 3 versions here, 1 is the original Gunpla Mark's lid but uses seperate latches that use 4mm rod as a hinge pin. 2 is Gamgroll's version that uses the original gasket, also with 4mm hinge pins. 3 is also Gamgrolls version but uses…
This is a base for creating your own holder/containers for Alexandre Chappel's 55mm storage ModuBOX. The files include the half size one and a full size one. I uploaded a base of a 2x2 and 2x3, those will qualify in most cases to hold…
Update: On v3 of the Starry and StarMoon case the shapes go all the way through, eliminating the need for a filament change. --- Update: I've added 2 new designs, a starry case and a moon and stars case. These are really cool to pair…
These models are recreations and alterations of The Stock Pot 's ESPHome Cartridge Player post. The main purpose for this upload is to make it easier to alter these models for the purpose of remixes. I think there could be some awesome…
Geoff997 on SlotForum did some clever updates to the machine, to improve the debris shield, as well as to make a standalone/portable machine that runs on battery power. Check out his posts on SlotForum here:…
A whole raft of different X carriages for the Ender NG - See filenames for detail. +.2mm means that the centres of the bushings/bearings are an additional .2mm apart compared to stock - this can help when adjusting the gantry, using…
was limited by bed size so altered some items. wanted to mount on the wall so made a shelf.
My personal remix of the Falx nerf blaster! Here's a brief summary of the changes: Mag Release (Smaller lever, better mag engagement, wider spring accommodation) Magwell (tolerance tightening, wider spring accommodation) Lynx Grip (Better…
The bottom of the original design did not fit the existing fan duct. I adjusted the size to fit inside of the existing duct. For the fan, I couldn't find a 24V 3-wire PWM type so I'm using a 2-wire and left the yellow wire disconnected.…
Moved the Cr-touch up 2 mm for better clearance. Don't forget to change bl-touch print config to #z_offset: 2.5
Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models. Fixed some parts alignment EDIT: 27.02.2026 - gatespacer bearing embedding made better…
I remixed the original design and only added the clip, fixing issues related to the clip
It will protrude about 4mm in front of the initial position of the mk3s nozzle. Also, the nozzle position may be about 1.8mm higher. BOM : two LM8LUU bearings seven heatset inserts, the same kind that is used on all Voron parts (M3x5x4)…
Remixed a couple of different size of this to better fit inside of the Plano 3600 4-row boxes that I use. Category: Hobby
Fixes I have designed to adress missing features for IKEA enclosure v1 enclosure: spacer - 50x50x2 mm, hole diam: ø3mm - adress issue with doors opening, they were too tight as well as other plexi sides excessive tension, causing stucking…
The 8BitDo Mod Kit for Original SNES/SFC Controller has slightly slimmer shoulder button PCB's compared to original controllers. This can result in missing inputs because the conductive rubber barely touches the PCB in some cases. If your…
Currently non-functional pending pusher updates. The Diana feed lips are much tighter than Talon mags. Will likely use ½" brass pusher. Print all files from Blush except for Lower, Mid Body, Mag Release, and Ram Body. Print all three Lush…
Remix of falcon14141 's Mewburner. Removed the nozzle camera mount. Still the orginal RGB goodness! Added for both Knomi V1 and V2, check that you print the correct version. Note ; Error in slicer? just press repair and its good to go. No…
This keyboard stand was designed around my Logitech K270 Y-R0042 keyboard. I needed a way to free up desk space on a slightly cramped desk. I printed this in Inland White PETG with the following settings: 0.3mm Layer Height (Draft) 3…
A dust collection base ready for remixing to fit your own dust collection. Includes .step file for editing.
Ikea IVAR is great system that's very customizable. I just didn't like that in my system the top of my sliding door cabinet didn't line up with the shelves surrounding it. So, I made these shims and posts to insert on the underside of the…
The haslab packs are starting to ship, and they are awesome... but my pack showed up broken. The connection between the cyclotron cap and the pack was too loose. This would cause the pack to not power up, or immediately lose connection as…
Hello, I made a remodelling of Scheppach Akku Halterung https://www.printables.com/model/445374-scheppach-akku-halterung-mgt410-scheppach-accuhold by redaeq. It is now compatible with the new 20V IXES series of Scheppach Accumulators. It…
Hello folks This frame is a remix of my PEX96 frame, it is designed for 20x20mm FC and ESC mount and for 19/2035 propellers. This is a 96mm class frame with holes for 1103/1105 motors (Racerstar BR1103 and DYS BE1104 motors have been…
If you downloaded the Firefighting Mech from the recent 1440 Makers Charity Stream.. you will want to download these files and print these pieces in place of the originals. A few people have printed the mech and there were common issues…
Previous make mentioned difficult of the outer filet, before I even printed it, remixed it with a chamfer on the exterior to avoid supports. Also added a variant with a relief valley for pens that have tighter clips.
Among the files there is already a 3mf ready with the necessary support already included. Here you can find support in various quantities to keep your colors in order.…
This is for the second printing of Santa's Workshop. A few pieces to make the insert fit into the second printing box, also supports sleeved cards. Mrgigg's full insert was for the first printing, and not all the pieces fit so I adjusted…
Update 10-8-23: Added a X carriage that lines up with the 3rd mounting hole in the stepper motor to prevent extruder drop. Prusa MK3 3mm extruder with better documentation, parts to accommodate my 3mm bondtech sensor remix and parts to…
These are various remixes of the Laser Bear Industries Dreamcast MODE Mount . version with removed SDCard loader hole for the use with an internal HDD/SSD only added 2 more 1.5mm fiber optic light pipe holes so you can see all 3 status…
PORTA ALICATE COM 8 ENCAIXES PARA ORGANIZAR
I will add more info as I tinker with this.
The original version is designed for the flat section at the end of the ridged Intex hoses. I have a few hoses that have been cut and no longer have the flat section so need a larger diameter connector. I designed these to taper from the…
Let me just say that I love CaseStudyno8 Lightsaber's. Darth Vader's looked the easiest to print and assemble, so I started there. Once I assembled my first printing, I decided I wanted a couple modifications. First I wanted the Power…
I'll leave this up here, but I now believe this other remix is a better solution to this issue.. I would try this instead: https://www.printables.com/model/338542-x1-ptfe-tube-guide-to-fix-loading-issues-best-of-b This takes the parent…
I wanted to use it on prusa mk3s, so I remixed it. CAUTION This is a MOD that requires modification by yourself to match the actual product. In my case, I cut a part of it after printing.
Źródło oznaczyło ten model jako treść 18+.
Some remixes of the 2 sided dice by Elec11
![[ALCH] holder - base for remixes ModuBOX](https://media.printables.com/media/prints/671198/images/5277546_99bc1bcb-9467-44cc-b74e-7c0ed1b7210c_d13b511f-66cc-4d94-86cc-62e2e2020827/5cb4aeff5e33e7d7c187687f05ec0c4a.png)
![Ikea IVAR Cabinet with Sliding Doors Shims [Fixes Height Mismatch]](https://media.printables.com/media/prints/119234/images/1158942_50f82914-4b28-4433-aba3-60233d2d794a/img_3385.jpg)
