Liczymy pasujące modele…
Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…
My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…
None of these need supports. The first file is the eyes and body base in case anybody wants to design their own plushies (not for printing). I use acrylic paint and it sticks very well but for better quality I suggest using model paint.…
These are an alternative clip for @LineArcLine's excellent Skadis T-Clip System. This version shortens the clip so that it does not protrude beyond its mounting recess and will not interfere with anything in front of it. Both painted and…
simple insert to fit universal flush cut pliers for filament cutting etc. use with blank insert_hollow from the original HSW board Check out my collection of HSW attachments here :) Printing instructions: no supports use 4 perimeters…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
This is model of "CatNap" plush made in Autodesk Fusion 360. The original model used as a reference appeared in Poppy Playtime Chapter 3 as a plush version of a main antagonist of story, this is a plush version of a monster.
Simple cable clip design, one clips into the extrusion and extends out, while the other is flush and routes the cables inside the extrusion.
I needed v-slot rail covers and wanted to be able to customize the lengths so I could work around my other upgrades. My design goals were: Flush top with the v-slot rail (others either extended over the top or were recessed into the rail)…
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
Since the new Flush Snaps are a little flimsy, it can be difficult to push them into their Multiboard counter parts - especially if you chose the tighter versions. So I made this little tool to help with that. Print settings I print these…
This is a basic hinged box with magnetic closures, fully parameterized in Fusion 360. It is designed with flush hinges for excellent stackability and arrangement. It is intended to use 1.75mm filament as the hinge pin. The hinge pin path…
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
you inspired me, I adapted the filament collector according to my needs. It is no longer so deep so you save space behind the printer but higher so that nothing falls over. The logo I have packed extra to glue so you save filament The new…
I saw other cap designs using pascal_lb's as a base, but they all stuck out from the printer, so I remixed my own! This one is flush with the printer and has a little interior handle to twist it on and off.
I wanted low profile gridfinity storage for my flush cutters and needle nose pliers, so here it is! I modeled this for the needle nose pliers that come with Prusa printers and the flush cuts that come with Creality printers. I left some…
In my case, the acrylic is flush to the enclosure, so I remixed the hinge to be flush. Also made it mirrored as I needed the hinge on the left side. In case you want it on the right, just mirror it in the slicer The tolerances are quite…
Shown with and without fuzzy skin applied. Scalable. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
I designed a detachable waste bin for my P1S. The slope and the waste bin feature a magnetic, detachable design, with a protrusion on the slope for aligning with the screw head under the waste opening. Magnets required for use: 1. Two…
I made this needle really big(10 cm) so it's good for crocheted big toys. I use it a lot to sew parts of plush toys.
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
I have removed the fixed supports and have made the area for the charger approx. 2,5 mm deeper, so it flushes better. Those 4 Slots are for full SD-Cards (microsd + adapter) Sliced in Cura 5.0 Printed with 0,28mm layer height (PLA) with…
The default flushing volumes for AMS filament changes in Bambu Studio are quite big. This guarantees a clean print without colors washing between filament changes but also produces a big amount of waste. In order to avoid having to print…
I think the settings in Bambu Studio are on the very safe side when it comes to how much filament is flushed during a change. I wanted a way to test what would be optimum. I thought about how best to approach this and came up with a plan.…
Tired of ugly screw heads ruining the sleek look of your 3D printed parts or woodworking projects? Welcome to the Ultimate Countersunk Washer Collection . This comprehensive hardware set is engineered with precision to perfectly hide…
This is a remix of some flush cutter handles i found on thingiverse (those: https://www.thingiverse.com/thing:4802229 ), i modified the base of the grip to make it a bit shorter. They are made for the flush cutters that you get with most…
If you print this for another tool, post a make sharing what brand / type of tool it fit (or didn’t).
In order to properly calibrate the purging/flushing volumes, I took the original file, set the color change point to be at the bottom of the tower, and followed the instructions in the original thingiverse description to get the color…
This is a remix of the HSW Flush cutters holders with the pin orientation flipped. The original model had the tapered end of the pin as the end that wasn't attaching to the honeycomb storage wall making it really difficult to insert. This…
Small tool holders for small pliers or flush cutters. Single and Tripple sized.
The Lian Li A3 is a great case but the power supply mounting options aren't always ideal. To get the most use out of the available space, I wanted to come up with a better solution. A user on Reddit was using a similar solution so I…
Clip for 3/4" Schedule 40 PVC Pipe. Designed this to use for mounting Christmas lights onto a PVC pipe, and then snapping the PVC pipe into the clip. I saw someone charging $3.50 for a similar model, so I made my own and thought I would…
Im not sure if this counts for the contest as it is a remix but i still think its worth sending in for the contest those handles are made for the flush cutters that you get with most creality printers and most printers in general im…
Finally visible is bottom area of the print - type of bottom fill pattern make different looks. I recommend to use textured print sheet. As visible is mostly bottom side, no need to push printer to high resolution. 2023 11 01: New version…
DESIGN UPDATE 2023-11-30: I updated the design to accommodate additional brands of calipers, and to address the different manufacturing widths of different caliper blades, combined with the varying characteristics of 3D printers and…
Flush / Purge Volume Calculator ########################################## # Intro ########################################## This is a calibration test setup in Orca slicer to help calibrate your flush / purge volumes and get you closer…
Covers for the arms of your flush cutters in case the original ones started to fall apart.
This is a basic stuffed animal eye, with backing. with basic print settings both parts fasten together nicely, but you may want to enlarge the eye piece by 1-3% for a tighter fit. This file should be resizable to your liking, by modifying…
This is my 2nd French cleat lock design to help keep your tool holders in place on your wall when you remove your tool. It requires that your tool holder sits flush with the bottom of your cleat. It's perfect for smaller or lighter tool…
These are templates for my ski drill jig (found here ). If you have a printer that can work with bambustudio or orca slicer and want to use a my print profile with settings and pre-colored text (There should be profiles for 9.0, 9.2, and…
This is the Desert Blush tenor saxophone mouthpiece. Tip opening is drawn at 0.105" (2.67mm.) Play Tests To see previous play tests, see this playlist. Baffle Shape To view the baffle shape, view the second .stl file (named “__half”). It…
Print instructions: 1. 0.2mm layer height 2. Fill 15% 3. Filament: ABS or PETG I printed 3 walls which are solid. You can also choose to print 2 walls, but if you add any amount of infill, the item will also be solid. Bucket thickness is…
This tool tray mounts directly in the front of the Snapmaker U1 using the shipping screws. It holds the scraper, snips, cleaning brush, hex keys, spare spring, spare screw bags, and has two extra storage areas. Fits flush to the front of…
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
Ensure that Prime tower is disabled and flush volume is set to 0 and infill direction is set to 0 As this is a work in progress please comment with any issues found
Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…
Underware Flush Connector An Underware connector that sits channels flush against the board. Also 26% less material and 20% faster to print. This model also features an inner hole that improves internal thread strength. A version without…
This is the enlarged version of my other Poop-Bin: https://www.printables.com/model/285625-bambu-lab-x1-larger-poop-bin in practical Use, it showed up that a larger Size is useful, and this time we go to the maximum size we can print .…
The flush mount design ensures that the deutsch connector sits level with the mounting surface, providing a neat and low-profile installation. Connector Housing : Base : A flat square base (approximately 50 mm x 50 mm) with mounting holes…
A modification to the heater control panel for the BMW E30 to have the radio flush with the control panel. This adapter sets the radio ~7mm back into the dashboard. To be able to use this adapter piece, you will need to modify your heater…
sits flush on the counter and drains into sink
This is a replacement for a broken one. Slightly different but does the job. Has built-in supports.
Siding flush mount for the Ubiquiti Unifi G4 Doorbell Pro. V1 is the original model that works/worked with the G4 Doorbell Pro when it was first released. V2 is for the later changes to mounting pattern / holes that works with the newer…
The feed-lips are a bit thin, this is so that cartridge is seated high in the magazine for reliable feeding, thus smaller layer heights are advisable. (I'd advise you to add to the thickness in this area until it does not fit in you…
mine oryginal rubber grips fall apart so i design better one Please, share your print in the comments. Thank you!
-=[ UPDATE 08-26-19 ]=- After about a month of use, the first version snapped it's little head off. I have redesigned this so that it utilizes a much larger hexagon guide pin. This time the hex is a part of the rod and goes into the…
This is the Rush. Except, i made it utilize Diana magazines. It'll fit Nightingale mags too, but that depends on how well you made the cutout for the hole to catch. Here's additional stuff i'm linking off Chance's remix of his Rush,…
Remix of a mushroom shelf with a mount placement, this one has a flush back for use with command strips
Holds CHP flush cutters on a standard 1 inch pegboard. Printing Instructions Print in downloaded orientation. Supports are required for the pegboard posts.
Unlike previous covers, these ones are designed to be low profile and sit flush on the bearings, printed with TPU and 0,2mm nozzle. This is not recommended by Bambu Lab so big boy pants on and create a new filament profile, the profile in…
A simple flush mount box for an Anderson plug. I print using PC carbon fiber to withstand the heat in the back of the 4WD.
This is a handle and lift arm replacement that I designed and has been working for me. I don't know enough about plumbing to say what systems it will work with. All of these are friction fit. I printed this out of carbon fiber nylon. No…
Remix of Cleberlop's poop bucket where I made the left side not stick out so the printer and bucket can sit flush against something on the left.
I hate using normal scrapers because they scratch the 3D printer bed, and plastic scrapers are not strong enough, so I made this scraper so the tip of the blade never touches the bed, but it gets very close to be effective removing the…
Repair a broken Kohler toilet flush handle system like this https://a.co/d/6Nci2Hg by 3d printing the handle, axle, and angled lever. Must reuse the original through flange. If no longer usable, you can 3d print the square sleeve from…
A small remix that allows to use this cap with the flush cutter from the Ender 3 Max Neo (and potentially also other Ender/Creality provided flush cutters). Slightly longer than the original, and the bottom has been widened a bit.
Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Cover to hold the pliers closed for storage. -Print in TPU standing on the opening. Category: Hand Tools
Holder for CHP-170 to go in Gridfinity sorting system. Credit to Zach Freedman for the Gridfinity System:
This is the same tool, but with the letters flush with the rest of the tool.
Almost no supports required, and EZ removal. Cutest chicken on the whole site. Tree Supports on build plate only Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
My toilet flush button got broken and i couldn't find any replacment in stores in my area so i decided to try my best and made one in fusion360. This is my first ever project in 3d so i think it could be something to improve but hey! it…
This is a lid for flush-mounted electric boxes. Can be customized for other diameters with OpenSCAD. Maybe, in some cases a brim is necessary for the bracket.
Wall Mount Bracket flush mount for panels and coverings with marking tool - Sistema universale di Fissaggio rapido a scomparsa per pannelli e coperture Filaments: PETG - ASA - ABS - PLA+ Hardware needed: Screw 3.5x10/12mm for the…
For gluing the clip i recommend UHU "Allplast" or “Hart Kunststoff”.
Simple remix of the original Vesa flat mount but with a 100x100 spacing Print instructions Print flat on whichever side, recommend at least 3 perimeters.
Made in 3D Builder Articulated Catnap figure from Poppy Playtime Chapter 3-4 2.0 update log 20.03.2026 The joints in the legs and arms have been enlarged for better durability (Joints from dummy 13)
Created with the Fusion Gridfinity Generator .
Source: https://www.models-resource.com/pc_computer/narutotoborutoshinobistriker/model/46683/
Reinforced the spring parts to reduce wobble when pressing the buttons. Added a stop to prevent the buttons from swinging outward. There are some hard to print overhangs, but the area ends up being covered. Tune your printer for overhangs…
a remix for folks with fitment issues is here: https://www.printables.com/model/1184276-qidi-plus-4-carbon-filter-hepa-filter We've been doing this all wrong! the carbon filter should go first as a prefilter, it will actually help the…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
My mom requested a bottle opener to save her hands and it's been far too long since I lovingly trolled her, so I'm delighted to introduce The Flushy Bottle Opener. It's an effective way to reduce hand strain, an amusing gag gift, and it…
I wanted a waste bucket that fit snuggly behind the printer as I have limited depth where I have the printer. I saw several similar buckets, so I followed the basic design and created this one. Printing is done at 0.2mm resolution using…
The blind cover has two parts, the base and the cover. The base gets screwed to the flush mounted box and the cover snaps onto it. I don't know if the 60 mm flush mounted boxes are used outside of Germany. The snap mechanism is inspired…
I recommend PETG 0.2 layer height, 0.4 nozzle, 3 layers and 25% Cubic infill Personally I use one for a mix of heat inserts and nuts and bolts, screws ect. to messure on while im designing stuff. Happy Printing !
This holder is a drop-in replacement for the original switch on -I assume- a European flush mount. None of the models I found was compatible with this system. The whole mount is 82x82mm. The switch goes in firmly without using magnets or…
Flush button housing model of roca company, the length of the whole element is 75 millimeters. The design includes sacrificial layer - print as shown in the picture SUPPORTS ARE NOT REQUIRED!!!
A trimming base for the ryobi cordless trim router. Used for flush cutting level with the surface. See the video here https://www.youtube.com/watch?v=YfQM_ieGrKo Print instructions Use at least 20% infill for rigidity.
Please post makes! I love feedback and try to do my best to use it to improve later models
Cap for cutters. You can print it fast strength. Please like if you download the model.
Supports needed for: Water tank Upper part of the channel (between water tank and toilet vase). Note: I had good results with Prusaslicer → Paint-on Supports → Automatic Paiting. I printed with PLA, 0.2mm, 15% infill.
Flush Cutter Stackable Gridfinity 4x2 Stackable Gridfinity Designed this so that the cutter sits below the level of another tray you place on top. The tray stacks with them in either way up. I've also added some extra pockets to use up…
This is a simple but essential replacement cap for the standard "Model 170" flush cutters (Plato, Justinlau, etc.) that come with almost every 3D printer. The original translucent caps are easily lost or stepped on. This 3D printable…
