345 modeli
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
Wydruk około 8,44 €–10,32 € nettoWstępna wycena jednego wariantu
I was inspired by the Prusa Core One Telescopic Spool Holder by dancan13f , and decided to create my own improved version. This version is flush with the side of the Prusa Core One when screwed in, which is more aesthetically pleasing. It…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Putting a gcode, but in case: 100% infill .15-.2 resolution Any material should be fine(PLA- 205-210celc) Lower print speeds(PLA- 40-50mm/s) Supports on plate only upside down If you enjoy my work, don't forget to like!
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Update in files named NEW : Main plate a bit longer Extruder pattern in gyro now 0,75mm below top layer substract your text now 0,75 below your color switch will make bottom of text and extruder pattern of same color ( see new picture )…
Wydruk około 0,68 €–0,84 € nettoWstępna wycena jednego wariantu
This Christmas ornament was built in Blender and has a small inset star that spins on an axle within a big star after removing supports. I would recommend printing it with 0.4 mm nozzle. Add supports under the axle and under the inset…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Inner part of the clip for the telescopic stainless steel tube of Miele vacuum cleaners. Might work with the non-telescopic version too. PETG recommended. Prints fine without supports on a MK4S using the print settings in the 3mf file.…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The idea of making a telescopic Back Scratcher is not bad at all. Unfortunately, the final design is bad, as usual... Let's fix it! Print instructions: Material: PLA Used Filament: Fillamentum PLA Extrafill - Traffic Red (RAL 3020,…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Currently a work in progress as needs a rubber band to hold on at the moment but uploaded stp so people can modify.
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Abstract caleidoscopic round winterwonderland
Wydruk około 7,87 €–9,62 € nettoWstępna wycena jednego wariantu
Design point was on strongnes and adjustment posibilities of the tool. Can be fixed on a table from 15mm up to 45mm. Set height, turn it around, setup angle. How to print: Print it with a PETG z=0,3 20% infill (String and parts of Srews…
General: Make your point in style Why I designed this: I designed this at my wife's request after she saw a hilarious video on Instagram of someone walking around the house and tapping at annoyances like laundry on the floor, hair in the…
Heads-up: There is now a beefier version 2, in case you have grandkids who tend to break stuff while playing with it. :-) https://www.printables.com/model/1499800-scratch-attach-printed-telescopic-back-scratcher-v This short (90 sec.)…
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed…
Keep your drinks stable and spill-free with this innovative gyroscopic can holder! Designed to attach securely to your belt or pocket, this holder uses gyroscopic principles to maintain your 33cl can in a level position regardless of your…
New sizes added !! For Trecking bike : width 56-40mm - new size For Road bike : width 44-28mm - new size For Mountain bike : width 72-56mm Telescopic bike fenders - Front -3pcs, Rear -4pcs For mountai bike :The widht of the fender is…
It is designed for "tactile satisfaction." The way the layers slide against each other provides a smooth, mechanical feel, while the sound of the plastic tiers clicking into place adds an auditory element to the fidgeting experience.
This is a work in progress project so the files might get updated. If you test it and have some suggestions please add a make and a comment, I would really appreciate any help. I started this project as a joke but the rod turned out…
A gyroscope fidget toy. It was printed at 0.2 layer height an 10% infill. It should be able to spin right of the build plate.
A spool holder that can handle even 2kg filaments. The original screws are used for assembly + an additional 1pc M3x5mm to secure the parts together.
DE: Teleskopauszug für kleine Schubladen. Das drucken sollte nicht zu schnell sein um gute Gleiteigenschaften zu erzielen (Perimeter nicht schneller als 80mm/s). Es werden kleine Stützen für die Überhänge der Führungen benötigt (siehe…
Update: Modified handle model!! The model on Printables was missing the lock that holds the spool sides and the center together. I have uploaded a new model with a cutout for the lock. Aktualizace: Upravený model držadla!! V modelu na…
Pocket indicator. It is useful for me when working together on one monitor, for example, when I need to point something. Folded length approx. 13 cm. When unfolded, approximately 50-52 cm. Max diameter approx. 13 mm The indicator consists…
It also works really well with TPU top part.
This model is compatible with the lego system.
Small disclaimer: Since Dr. Allen Mehr lives in Hawaii and I am currently in germany I had not real laparoscopic instruments at hand and therefore used some wooden rods for my fotos xD Heyho Last year Dr. Allen Mehr asked me to help him…
This is a telescopic back scratcher. It's pretty easy to use. Just extend to scratch, collapse to store. When screwing the scratcher attachment on to the handle, DO NOT force it. If it is tight, lubricate the threads. Overtightening will…
Summary: This is a gaming themed modular drink and snack holder. It is perfect for keeping your drink from spilling while on an uneven/level surface, such as a couch, chair, or bed. It includes a storage compartment perfect for holding…
Part combination for overall height of the leg Overall height in mm Screw Base 134 to ~190 115 mm 109mm 154 to ~210 115mm 129mm 174 to ~220 115mm 149mm 194 to ~240 115mm 169mm 200 to 300 169mm 169mm
Heyho Some time ago I published a laparoscopic trainer that can be 3D printed for medical students. The advantage is, that this design is cheap to create, very versatile and portable. Perfect for students!…
Hi guys, seeing the telescopic tripods that you are probably familiar with I was wondering if those can be 3D printed. So I've devised a snap lock mechanism which might be similar to those telescopic tripod but this one can be 3D printed.…
Telescopic Multi-Cut Tape Dispenser This tape dispenser is a great helper for wrapping and packing gifts, especially for Christmas :). It can hold two small rolls of tape side by side and allows for creating up to six pre-cut strips using…
Gyroscopic cup holder designed to clamp to boats or offroad vehicles and prevent beverages from spilling. The beverage holder is designed to accommodate an average sized can. The hardware used to assemble the initial prototype were 1/4-20…
I've always loved these kinds of spinners, but they can be a nightmare to print. Ball-based bearings are the best for spinning, but printing spheres is an ongoing challenge. So I thought I'd have a go to design something that is easier to…
There are many more like it, but this one is mine. The goal of this design is good printbility with sword like profile. So curvature and reasonable taper , while having all QOL features like changeable blade and guard , and way to lock so…
This saber is 100% support free. The handle is split in two where the chamfer starts. when these pieces are joined its very hard to see the seam. You will insert the printed saber into the bottom handle and the top handle will slide over…
For a small Christmas tree Ornament
v2.0 is made to be BEEFIER - it's the "I have grandkids" edition! v1.0 has 1mm thick sidewalls on the telescopic handle, while v2.0 has 2mm thick sidewalls on the telescopic handle. I kept the same outer diameter on the final by (a)…
Gyroscopic Christmas ornament. You can print each circle in a different color or just like me, change colors on layers :)
Heyho For the MakerFaire in Hannover I did need some tools for the visitors to thest the laparoscopic trainer. https://www.printables.com/model/864261-laparoscopic-trainer-for-students-and-surgeons-col Sadly the tools my friend Allen Mehr…
Ornament= 0.4mm space Ornament2= 0.2mm space Ornament2 no logo= without star 0.2mm space original from https://www.thingiverse.com/thing:207632
This is a fidget that you can put on your key chain to add some personality, or keep as a standalone toy. It can be easily customized through your choice of the different provided STLs, or even further by using the provided blend file.…
Introducing the Telescopic Table with Threaded Security: a compact and portable stand designed for maximum stability and convenience. This innovative table features telescopic legs that can be adjusted to three heights: 180mm, 315mm, and…
No supports neded. Recommendation: use quality print settings for thread functionality. Tube diameter 28,5 mm. Last more then 3 years (PETG).
Os presento mi último y novedoso diseño, que permite poderlo imprimir de forma telescópica (con un tamaño final extendido de 225 mm) en una impresora pequeña, de una sola vez y sin usar soportes para voladizos. I present to you my latest…
[M10 Manpack] Ultra Portable Antenna Kit vertical HF antenna with optional loading coil i needed to create a super compact antenna kit utilizing all M10 threads. it enable the user to use the very cheap telescopic whip, loading coil and…
I recommend using PLA for this print and use a 0,2 layerheight. This print doesn't need any supports. Happy printing
Clip Stick attachment I made for a telescopic painters pole, diameter approximately 22mm. No moving parts, compliant holding of the gate. Friction fit, no glue needed. Carabiner is held open without the need of tape or elastic band,…
Mutter: Layerhöhe 0,16 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material PLA+ Klemmteil: Layerhöhe 0,2 mm / Infill 100 % / kein support / Slicingtoleranz “EXKLUSIV” / Material TPU TPU A95 von 3DJake Dieses Filament…
This toy demonstrates gyroscopic effect. The inside wheel should be heavyweight enough
I created this telescopic version of the New 2DS XL stylus because I found the original one way to short to use comfortably with adult hands. The version in the picture was made on a Polyjet printer. The files “Tip” and “innerstop” were…
Q: What do you get if you cross a snowflake with a gimbal? A: A gyroscopic snowflake! It actually works! Can there be any better Christmas decoration? There are three variants: -small , (Gimbal snowflake star small.STL) -medium (Gimbal…
Modificación del modelo de @kuldar para que sea mucho más compacto y fácil de usar. Recomiendo usar pegamento fuerte para unir el cuerpo con la cabeza, y cuando lo lleves de ruta meter un mosquetón o una cuerda por los agujeros de la…
Summary This is a very sturdy mini tripod with telescopic legs. It has a 1/4 inch universal connector, which will fit any decent camera. I have tested the tripod with weights up to 3.5kg (7.7 lbs), no problem. Printing I have printed…
Blast off with this compact 3D printed rocket 🚀 Clean rounded shape, circular windows, and a smooth telescopic flame that extends in segments for a playful, mechanical feel. Easy to print, fun to handle, and perfect as a desk toy or small…
A great way to stabilize your drink while you ride! A lot of other models I found only seemed to work for lighter drinks and riding, half empty cups, or bikes with a lot of handlebar real-estate. I needed something that could hold an XL…
Gyroscopic cup holder. The rings are modified from the original for better fit with screws, and nuts. Requires 2 12mm, 2 16mm M2.5 screws, and 4 M2.5 nuts. Use Loctite to secure screws in nuts. Print without supports. STEP files are…
This spool holder is inspired by the one made by MaikyX . It replaces the original side spool holder of the Prusa Core One. Its advantages: With its screw, it can support filament spools with a width of 130mm, including 2kg spools. It has…
I like the original design. However, the bracket broke as I was tightening it. Therefore, I decided to buy a double clamp from Amazon, and modified the outer ring to fit it better. Additionally, I carry soda cans sometimes. Initially, I…
allows you to position a bar/rod between two surfaces and by rotating the male into the female in/out you can fix it.
Decorate your Christmas Tree with this beautiful ornament! It prints with standard print settings and you do need to enable supports. Please feel free to post your makes! Happy Printing!
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
i made a remix of Stroller hook with gyroscopic cupholder by Oleksii Zelivianskyi to hold cans and added a handle. Now you can dance and don't spill any beer! enjoy!
3D-Printed Arthroscopic Camera Housing This model represents the 3D-printed housing of a low-cost arthroscopic camera developed for use in a knee arthroscopy training simulator. 3D-Printed Knee Arthroscopy Simulator (Scientific Validation…
Simple gyroscopic star ornament. Two options included. There's a dual color option that uses filament change or just use the single color option. Print settings: Designed with a 0.8mm tolerance, prints best at 0.2mm or better. Avoid using…
Remix of gianfranco's great gyroscopic keyring. I printed one and didn't like the way the inner ring spun. So, I shrunk the inner orbital by 5%, merged the handle and dropped the polys by a bit. Category: Keychains
What makes it special On my finger, this ring spins. Take it off, and it works a lot like a gyro. That second use is what makes it a 2 in 1 fidget, and it prints in place, so it works right off the print bed. It is small and fast, too.…
Features: - Manual focus - Height adjustable from 170mm to 270mm - Robust - You can engrave thick objects - Easy to assemble and store - Suitable for Laserpecker L1 and L1 Pro What do you need: - 1x M8x40 screw (hex head) - 1x M8 nut - 1x…
I had to glue and repair the crank handle a couple of times before, even added a screw to hold it together, but now it was time to replace the whole part. The screw moves easy and runs perfect. Be careful to click in the tip, in order not…
Hawke Telescopic sight scope turret cap, for Hawke Varmint series telescopic sights but may well fit other models with ~23mm turrets. The internal thread was custom-specified in Fusion360 as an additional IsoMetricprofile M23x0.6mm. This…
This is a collet to lock a telescopic rod made of two tubes (e.g. aluminium or PVC) of such diameters that one fits snugly in the other. This is a redesign of my other model , easier to print, easier to customize in the code, easier to…
I needed a tube to store some paitings, so i edited the original by cutting it into pieces and scaling it directly in the slicer (I have no idea how to do 3d modelling, had to get by with the slicer). Basically, to attach all parts i used…
Edit 2025/10/26: This model is a usable prototype that proves feasibility of the idea. An improved, more flexible and convenient version can be found here:…
To perform laparoscopic surgery, a patient’s abdomen is inflated with carbon dioxide and laparoscopic instruments are inserted through small incisions in the abdominal wall. An admission device, the trocar, is fixed into those incisions…
It is perfect for some stressed moments.
Update 11 Dec 21: I have redesigned a telescopic leg that allows you to have any variable height between 35 to 70mm. This allows a more comfortable tent that allows for the thumb cluster to remain up for easy reach. However, the…
Print two each of the included .STL files in the original orientation. Insert into wall at appropriate distance.
Extending sprinkler system ∅8mm connector
Just make sure u use strong material and adjust the size to the pole you wanne fix this in .
The grip handle of my telescopic pool pole was damaged. I wanted to replace it by a one printed in TPU. It was a good project to continue testing TPU on my printer and check how TPU is outdoor resistant (Temperature, humidity and UV) I…
Its less bulky and lighter than the stock case. Designed specifically for the medium light action Daiwa B.B.B. Might work on other rods. You will need to supply your own strap.
This design combines two 4x microscope lenses together to create a stereoscopic 3D macro lens, with 2x magnification and a 5mm stereo baseline. It has been designed to be shot handheld in the field using a flash for lighting, rather than…
**English:** The "Print and Place Telescopic Back Scratcher" is a versatile tool that can be easily customized. With interchangeable attachments, it can serve various purposes. The stick is simple to extend and can be compactly folded,…
Description i made a remix of Stroller hook with gyroscopic cupholder by Oleksii Zelivianskyi . Thanks @OleksiiZelivianskyi for the STEP-File! This coffee cup holder fitting cups of the Klix coffee vending machines was developed to get…
SUMMARY SECTION Feeling lucky? Love basketball? Get yourself this mesmerizing 9.1 cm × 9.4 cm × 2.0 cm telescopic clover! With its hypotizing, elastic-like features, you will never be bored with this fidget. To create this project, I…
Compact and sturdy telescopic baton, suitable for security and self-defense/Matraque télescopique compacte et robuste, a
I took out the ball because some printers had a hard time printing the ball. NO SUPPORTS!!! Check out the original model here .
This is a telescopic straw for birthday party.
This is an holder for Telescopic pole. Works great when printed with PETG.
Telescopic Arm for (small) Multifunction Arm System Adjustable arm length up to 42 cm Print-in-place / no assembly Ratchet lock / snap lock Tested with PETG @ 0.2 layer height & 4 perimeters/walls, no supports May work for the regulare…
Support rings for telescopic HAM radio masts in various dimensions. These can easily be scaled in your slicer to fit other sizes, mine are for a SOTAbeams ultralight mast. Re-designed in 2020 to provide more strength at higher winds.…
Print it with this setting: 0.2mm height without supports sepreate it into parts Print in Place
I needed a tripod light enough to carry on hikes without thinking about it. This one weighs between 180g and 246g depending on the head you choose — either way, lighter than most phones. The legs are carbon fiber tubing (telescopic, with…
Needed a fitting to attach my gutter cleaning brush to my Unger pole. Print as oriented in the file. No supports needed. I used 6 walls and 50% infill. Printed with ASA for strength. I'm sure PETG would work too.
Remix of the original donkey clamp to fit in the 17mm arm of Thule bicycles arms. Added little more space to snap easly. Secured with zip ties. I suggest to print with PETG. No need to use supports. Onshape link if you want to remix it by…
I made this adapter for my BSP D6 telescopic controller to be able to play on my phone (POCO F5 Pro 6.67") in a portrait orientation. Features: The adapter fits phones at least 73 mm wide up to 125 mm. Case/phone thickness compatibility…
