1125 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Desiged this tower in freecad after the model of already existing examples
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sun Shield enclosure that transforms your indoor aqara temperature, humidity and air pressure sensor into an outdoor wireless weather station. The combination of sun shield dishes and internal cavity ensures some degree of air ventilation…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
I bought a new spool of FilaCube PLA 2 , but it jammed the extruder as soon as the second print layer started. FilaCube recommended raising the temperature, determined by printing a temperature tower. Most temperature towers use way too…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this design I have combined my tiny benchmark (link below) with a little temperature tower, which is just big enough to give me all the test results that I need to chose the printing temperature for a particular material. Features…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
To adjust the temp tower you can use the py-script. https://github.com/HerrSkunkhunt42/temptower-gcode-adjustment Or use the example gcode for PETG or PLA with 0.4 nozzle at 0.2mm layer height. If you use Prusaslicer, you can insert the…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 36mm x 29mm 6mm Keyring hole
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
G-code is available with related modifications. A 0.4mm noozle printed on an Ender 3 is used.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the rabbit's feet.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Configuracion de bgcode con cambios de temperatura para prusa mini ya que estuve buscando para mi y no encontre
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have bougtht several round Temperature and Humidity Meters to put them inside the filament spool holders. I have used one in my 3D printer chamber for temperature and humidity indication. These meeters are tiny and round. I could have…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
This is a magnetic holder for temperature sensors. You'll need a 8x4 or 8x3 mm magnet. There are three versions of the holder. The smallest one should work with sensors of ~4 mm in diameter, the middle one fits sensors of around 4.9 - 5…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for temperature sensor from Aqara. The sensor just slide in the holder and can be placed on shelf or furniture. Print settings: PLA Layer height: 0.10mm
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
A stand to hold one of the cheap temperature-humidity-meter combinations available on amazon and used all around the 3D printing eco-sphere. Print instructions I printed the stand in PET since I had enough of it lying around, but it is a…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A really simple wall mount for the "square" Xiaomi Mijia BLE temperature/humidity sensor (LYWSD03MMC). Depending on your printer, you might have to adjust the size a bit. For our Mk3S I created the model with 0.2 mm clearances on each…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
A case for Arudino DHT11 temperature and humidity sensor. The case is printed in two parts. No glue or screws needed. The chassi may have to be cleaned from any residual before inserting the cover. The case can be mounted with…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Adapter / Holder / Mount, for a common rectangular humidity and temperature Sensor. Can be installed and removed quickly - the same grip shape as the “Spool Holder”. Suitable for installation on the "Printer Frame" part. Material:…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temp Tower for C1L
Wydruk około 1,63 €–2,00 € nettoWstępna wycena jednego wariantu
This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA Temperature Calibration Tower (190 °C – 230 °C) – Creality Ender-3 V3 SE This is a ready-to-print temperature calibration tower for PLA filament , designed specifically for the Creality Ender-3 V3 SE . The model helps you determine…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
Needed a MINI+ version with the setup so i combined all of the information from the 4 remixed models
Wydruk około 2,13 €–2,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu
Temperature tower from 220 degree to 190 PLA BAD: 70 degree C
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
The Sonoff SNZB-02 sensor is a simple and cheap ZigBee temperature and humidity sensor. The default mounting option is using a sticker to attach it to the wall. However, walls tend to be colder than the room they are in due to thermal…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extruder Nozzle : 0.4mm Layer Height : 0.3mm First Layer Height : 0.35mm Top and Bottom Solid Layers set at 3 Seam Position : Aligned Seam Gap Distance : 15% Scarf Joint Placement : Nowhere Perimeter Generator : Arachne Fuzzy Skin : None…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
A clip to securely hold a standard STC-1000 temperature sensor in place. Can be attached to any surface using a Command removable strip or double-sided tape. Infill: 100%
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Start:270c, End:205c. This is a remix of ABS+PLA to get a better test range for PETG and other filaments. Sadly I did a poor job (using Windows 3D builder) and my layers are off by one, however it still performs the job adequately.…
Wydruk około 4,17 €–5,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ready to print :)
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Updated to ver. 1.1 (recess on the rear side for the instrument is removed). For those who need a stand for squared shaped temperature and humidity meter. As I already designed a stand for a round meter I need one for a square-shaped too.…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
I had some weird PETG that printed best at the lowest 220°C PETG temperature tower floor. I wanted to check lower temperatures and created a reverse temperature tower (gets colder as it prints upwards). Seems my PETG might actually be…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This bracket is designed to allow a nest temperature sensor to be seamlessly mounted to a wall with a “Mini” 3M Command Strip, while still being easy to remove the sensor for battery changes. Very useful for when you can't, or don't want…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Economical in material
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Only wanted to check the 245-230 C temp ranges, so I remixed this one for the Core One.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A powerful nano-sized no-nonsense temp tower to help you fine-tune a profile for your filament. Inspect stringing artifacts from 230C (at the lowest layer) to 190C (at the highest layer). * Uses only 150mm of filament - why waste…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is not a direct remix but a similar design to the Crua9 temperature test tower ( https://www.thingiverse.com/thing:3347967 ). Crua9's design has been my favorite thus far but I wanted free reign to choose my temperatures not dictated…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this test shows how fast your filament and nozzle are capable of printing. You can see my results in the attached photos. I compared the following nozzles: Prusa CHT High Flow Prusa ObXidian CHT High Flow Prusa Adapter + Standard E3D…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
If you are using chamber for your MK3s its good idea to have any temperature/humidity indicator. For this case it was designed simple holder in two variants - with post processing and with “print&go”. For both models PETG recomended. I am…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be used with most of the rectangular temperature & humidity sensors you can find on Amazon or AliExpress. The Prusa Temperature Sensor also fits well. Hole dimensions : Front : 48.20 mm x 29.20 mm Rear : 45.80 mm x 26.80 mm BOM : 2 x…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The models for temperature towers all seem to be large and long prints. This is something that will likely just be thrown away, and no one (I don't, I assume everyone is just like me) wants to wait hours for a tower to print to find the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
No support. My sensor is 41 mm inner diameter. There are 2 notches to pass the brockets of the sensor. Insert the sensor through the notches, then rotate the sensor to have the display horizontal.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Prusa XLIS Temperature Tower bgcodes
Wydruk około 2,39 €–2,92 € nettoWstępna wycena jednego wariantu
Weather resistant case for Xiaomi Temperature sensor, so you can use the sensor outside. Just stick it to the window. Print instructions No support needed.
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Core One/+ Temp and humidity gauge stand. Most Ive seen for the core one are sitting where you need light or get real close to read it so using two models I made a solution that is easy to view. The Thermometer / Hygrometer Stand by…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this to solve a very specific problem: learning exactly what I need to know to make beautiful prints while using as little material as possible. As a print farmer it's crucial to get perfect prints every time. Understanding how…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Aqara T1 sensor in a nice housing, protection against almost all weather types. Easy maintenance by unscrewing the T1 holder to replace a battery for example. Printing, I used organic supports, overhang threshold at 30 degrees. Used…
Wydruk około 5,46 €–6,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Transparent filament temperature test that changes temperatures for each cube that is printed with the best setting possible. Settings are the same as from this guy . Used filament: Nebula Filament PETG Clear (Natural)
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
A simpel stand so the sensor is not laying on something. Standard is tight fit and angle of 30 degrees. Easy print with supports. I used organic supports.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for round temperature/humidity sensor, suitable for mounting in AL profile 3030 (Prusa Mini). The holder has prepared guide rails for the grooves of the AL profile 3030, the hole in the holders is prepared for an M5 screw (it is…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
Deutsch (English below) Zubehör für den Optionalen Filament Guide von Prusa. Ein halter für den Temeratur sensor der Enclouse. Er wird einfach auf den Spulenhalter geschoben wo er einrastet. Zur zusätzlichen Fixierung kann er auch mit den…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
THIRDREALITY has several sensors that are all 2.2" x 2.2" x 0.48" I have several of these THIRDREALITY Zigbee Temperature and Humidity Sensor Lite's and needed a way to mount them without permanently sticking them to a surface. So I made…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena jednego wariantu
Design to fit DHT22 module assembly produced by DSD Tech. Module can be found on amazon. Similar product may work. Base mounts to surface with single fasteners. All other components compress fit. I mounted this DHT22 print to my MK3S+…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for temperature and humidity sensor for your Prusa i3 MK3S+ and alike. Fits on top of left or right Z-axis. Printed using 0.2 mm layer height using black Prusament PETG but PLA and other materials should work just as well. With…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Orientační tabulka teplot filamentů. Určeno primárně pro začátečníky v 3D tisku. Doplněna i verze bez očka.
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Temperature and Humidity Monitor for my Prusa Mini+ enclosure, although it is standalone device (requires USB input for power) so can be used anywhere you want to monitor temperature, humidity and barometric air pressure. A small,…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Housing for the PWM Driver module I found on Amazon. The module can be found here: Amazon.com: PWM Driver Module, DC 12V 24V 48V 2 Channel 4-Wire Fan Temperature Controller Speed Governor Display Module for PC Fan/Alarm : Industrial &…
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
No supports needed The support is fixed on the wall in the desired position with double adhesive tape.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is Prusa MK4 Z-Axis Temperature & Humidity Panel Mount. It is one of many my designs but first upload ever on Printables.com. Plug and Play. There is no need to modify printer in any way. Model is created with FreeCAD and exported to…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
The 3D model is a custom housing designed specifically for the Xiaomi Mi Temperature and Humidity Monitor 2. This model was created to provide a solution for those who may have encountered the issue of their original housing melting or…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
About Original Prusa MINI Enclosure comes with the temperature / humidity bracket which can be mounted only on the front/back holes of the enclosure, due to the fact that those holes are 60mm apart. I modified the Guide & Covers >…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple and functional stand designed to hold a small temperature and humidity sensor at the perfect viewing angle. The model is split into two pieces to ensure clean printing without any supports — just print both parts, add a small…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Got the Mi Temperature and Humidity Monitor 2. Didn't want to mount it with double sided tape and needed a stand so I can keep it on my desk. Here it is :D Monitor just slides in with very little wiggle room.
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small case for D1-Mini and temperaturesensor D18B20. I use this sensor for my Homeassistant. I made a tight fit for the board. If it won't go into the housing just grab a file and make the board a little smaller.
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnets integrated into the holder make it easy to place the temperature sensor inside the Printer-box housing. I used 12x2.7mm magnets. You can adjust it to your needs be adapting the STEP File I provided.
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thanks to Makers feedback who all-ready had MK4 Z-Axis dust-cover and wanted to combine with my MK4 Z-Axis temperature and humidity panel holder I added adapter version. At the moment added only LEFT side, but will add soon right side…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 1h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 3 perimeters, no supports Post processing instructions: None Assembly…
Wydruk około 0,73 €–0,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The temperature control dial cover broke on my moms 2013 Honda CRV, so this was made to cover up the bright light underneath.
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Small hanger for H5101 for Ikea Lack builds Print instructions Temperature hanger for Govee H5101 in a Lack enclosure.
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
