Liczymy pasujące modele…
Airless Tennis Ball , a design based on improvements from other designs. Improvements: Improved hex mesh density to add strength and functionality in a wider range of materials. General increase in thickness for a better feeling of weight…
An airless ping pong ball! Seen with some of my other ping pong machinations ( https://makerworld.com/en/models/166872 & https://makerworld.com/en/models/207809 ). Legal weight is theoretically slightly high (based on design program and…
Airless Tennis Ball , a design based on improvements from other designs. Improvements: Improved hex mesh density to add strength and functionality in a wider range of materials. General increase in thickness for a better feeling of weight…
Airless Tennis ball GEN 2 brings improvements, which were tested in Tech Solutions workspace. Ball is designed to be printed with almost no support when printed on any Bambu lab 3D printer. Compatible materials; PLA, PETG, fiber…
Rocker feet for Wahoo Kickr core v2. Needs 2 additionnal tennis balls per feet. Designed to work with kickr core rubber feet still in place. The goal is to have more compliance in the trainer and be more comfortable during indoor training.
I printed the tennis ball in PLA + which bounces well and hasn't broke so far. one thing that I'd recommend is to print with a layer hight of 0.16 to 0.12, it makes the balls last longer. but i wouldn't go below this as the balls i…
Introducing the next generation of airless tennis balls, optimized for 3D printing: a perfect blend of enhanced strength, vibrant multicolor options, and minimal support requirements. These innovative airless tennis balls are designed…
Update: 26.05.24 - Remodelled top mount a little to add strength. It's slightly thicker now and I added small fillet (see picture below) to eliminate weak point. All three models have been updated. Enjoy! This adapter is the result of the…
Phone holder to be mounted on the court net. No other equipment needed! Easy to print. The slots are large enough so that phones can be inserted with cases. If you have some ideas for changes, let me know. And please give the model a like…
This is a remix of this model: https://www.printables.com/model/1222316-airless-volleyball/files
external micro antenna mount for uconsole
Announcement: I released new v2.0 adapter with simple one piece, one screw mount. If you're looking something even more stable than Velcro strip mount, I highly recommend checking it. Update 25.11.23 - Added precision position calibration…
MR (ANT) TENNA FROM DELTARUNE
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
Antenna end insulator, for attaching end of wire antennas to support lines. Designed for print-ability, structural strength, minimal chafing of wires and lines. When printed at 70% scale (recommended size) or more, exceeds typical support…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…
Easy to use compact and lightweight endfed antenna for HF bands. Deploys in seconds – ideal for POTA activations and preparedness scenarios. Requires use of mast, tree or another raised point anchor point. BNC male connector. Short run of…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
Serve up some fun this holiday season with a tennis racket ornament! I think this racket looks relatively generic, but was based on the based on the Babolat Pure Drive if you're wondering. Could alternatively be used as a keychain. No…
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
Full tutorial to be found on the RAspberry Pi website .
Do not have an ability to buy a set of table tennis paddles and a ball? No problem at all. You can print one at home:) Entertain yourself without the need to go out for shopping. Print instructions Paddle: Layer height 0.2-0.3mm. Infill…
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
Last photo shows the view from bot cameras combined(I highly reccomend putting cameras in wide angle mode, and putting the device on the white line - not directly on the post)
Inspired by something i saw on Instagram, original didn't publish the files. But objective is to place over the net in the corner, insert your phone and record / take photos. T - Side is for tennis aimed to the centre T of the court on…
This is an exact model of the popular Tennessee T Logo. This should only be used for personal use. I am not responsible for any uses that result in copyright infringement. The dimensions are 54mm x 48.7mm x 5mm. If you want to change the…
I designed this to put my Suito Elite Smart Trainer on tennis balls. This allows for significantly more side-to-side movement and also reduces noise/vibration induced into the floor. I use 4x for my suito. The feet are mounted using 7,5…
Seii-Radiomaster_Boxer_Antenna_mod_adapter_v7_PETG - I took Bikernickmn's model and just polished that widest square piece because it was damaged in the original file. Also, whole file is not properly centered by the original author and…
Need a way to store your lightweight wire antenna for Summits on the Air or Parks on the Air activations? This winder fits 70 feet of 26 ga wire or smaller for a 40 m end fed halfwave or random wire antenna built from one of my kits from…
A remix of a Rocker Plate Feet originally designed for the Wahoo KICKR Core . The hole diameter is adjusted from 55.90mm to 49.20mm for compatibility with the Van Rysel D100 trainer . The original text on the model is also removed. I've…
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
Material: Pet-G or ASA 275 or ABS
This is a bat/racket for playing table tennis (pingpong). Dimensions are accurate. Print Instructions: If you do not want to use the pre-modified PrusaSlicer files, you can set the settings yourself: If you have some TPU or similar handy…
These are designed to slip onto a thin metal headband. Printed in PLA at 100% infill with print thin walls enabled.
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
I designed this Shark Fin Antenna cover to replace the OEM degraded Antenna Bee sting in my Mitsubishi ASX. Printed in Dark Silver which matches with the car color. Print in PTEG for heat and weather durability. Printed without support.…
The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…
Model This model is a keyring in the shape of a tennis racket. Use it to decorate or label your tennis bag or other accessories. There are two versions: The " Tennis Racket Key Chain " is the original model, which is a more accurate model…
3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.
I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…
The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
This is a simple, elegant wall mounted rack for storing table tennis balls. The balls are held securely and won't be dislodged by wind if, like ours you have them stored on a verandah, but they are easy to remove and replace one at a…
This design is a tennis ball holder to clip on your belt. It is made in two parts "Tennis ball holder" and "Clip" to make the print easier. The two parts are assembled by 4*M3 screws of 5 or 6mm.only the base of the spherical part require…
Tennis ball rocker foot for increased comfort on your Wahoo Kickr V5. Probably works with other Kickr versions but not tested. Ball diameter is 65mm which should fit most tennis balls. There is more than 2cm of vertical travel space which…
Tennis racket keychain 30x70mm. Hole for key ring is 3mm. I include step file so you can put your own logo on it.
This project was my highschool finals project. The main idee behind this machine is to have a form of entertainment for your dog while you are at work, shopping, studying,… It is designed to be an fully autonomous tennis ball launcher…
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
Bracket for mounting an SMA antenna socket for different applications. In my case an ESP8266 with u.FL socket and external antenna. Socket with external hex locks by itself into housing. Therefore easy mounting No supports necessary.
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
This model is compatible with the lego system.
Can not be used by katcaps
All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…
Tennis Ball Thrower to play fetch with your dog. This was printed diagonally on an Ender 5 Plus and has an overall length of about 16.5in. Printed at 50% infill with 4 wall count and supports touching baseplate.
a tennis ball that doesn't need any air to bounce.
3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…
Designed to be Printed on an FDM. Make sure Detect Thin Walls are enabled. There is a bevel in the sides to make location of assembly easier. Make sure the model is printed flat on the build plate with the thickest part of the bevel down.
I loved the design of the slim snap-together OrangePi Zero 3 case by Gerber but I also wanted the antenna mount from the case by TheParanoidEngineer , so I combined them :) Make sure to route the antenna cable through the notch in the…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
Airless Tennis Ball Dimensions: 65mm diameter wall thickness: 2mm Print tips: needs support pla
Camera mount - print in PETG. Antenna mount - print in hard TPU (70 D or harder) and use cable ties to fix antennas in place. Supported camera ange is from 0 to 30 degress (the mount is slightly in frame at 0 degrees). When printing…
This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…
I created this antenna winder for SOTA activations, but of course you can use if for non-sota activities as well. The winder serves a second purpose as a strain relief for an endfed antenna and the paracord used for fixing the antenna to…
This remix adds a clip for a Female BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio…
If you don't have a printer, I do sell them(velcro included) on my site for cheap with free shipping for those in the USA. https://shop.ke9bos.com/ This is something I made for my ham radio adventures. This has been really helpful for me…
Designed this tennis racquet holder to hold 4 large size racquets, it can also hold 4 tennis balls. Print with supports on build plate, 0.3mm layer height and 15% infill. I used PETG, but PLA should be okay as well Print Settings Printer:…
use vhb tape for antenna
Tennessee, USA (TN) Topographic Relief Map with Rivers and Coastal Waters Tennessee, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
This is version 2 of the tennis racket wall mount, made of 2 parts so that the mounting mechanism is hidden and there are no visible screws. It still holds 3 rackets but only uses 2 screws. Note: I wanted to make a nicer design with no…
This remix adds a clip for a Male BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio operations,…
Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
I modified my Packtenna EFHW to work on 20m and 40m with a extendable link. I got the idea from a K8MRD video, but didn't care much for how he had the organization (both wires on the same winder). I've got this winders profile setup to be…
The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
About This is a set of replacement feet for the Wahoo Fitness KICKR CORE 2 Smart Trainer which hold tennis balls to allow the trainer to rock and move slightly while riding. This can reduce fatigue and lead to longer rides and more…
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If…
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
Tennis Racquets have a buttcap (butt cap) placed over the pallets on the handle of the racquet. This is modeled after the buttcap from a Head Boom MP. You can also resize the model in Onshape which has a free license available (anything…
Tennessee Titans 1st Layer Black 2nd White 3rd Red 4th Black 5th Blue
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
Insulator for wire antenna. Can be used as tension relief on the feedline side and as insulator on the supporting side. Also works as apex insulator for delta loops, inverted L, etc. If using 14 AWG knotting the antenna wire is not…
Original design by by LY3LP, recalculated by George M1GEO Dimensions and design: https://www.george-smart.co.uk/antennas/dual_band_satellite_yagi/ How to print: Element holders - 4 perimeters 20% infill no support - 6 Pcs Radiator holder…
Update: 13.05.2024 - Modified the top part of the mount slightly to add strength as seen on below picture. The top pic is before bottom is after. I also updated 6.6mm ad 8mm models. Update: 24.03.2024 - How to video guide by Bonsaizocker!…
A remix of the uConsole micro antenna 0.2 mount model for a countersink screw plus a mount for the other corner.
Tiny tennis racquet for a sporty Easy 13. Based on @Black_Printer_546175 's racquet design. It's possible to create ‘strings’ with a needle and thread. I tied it off with tiny knots and little dabs of superglue. Super-quick print so if…
A small antenna stand for propping up antennas with sma connectors. Set up your sdr or handheld radio antennas in a better position easily with an sma-antenna cable and this simple stand. Printing: Printing upside down is recomended to…
I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…
Print it and then paint it how You like! You can easily fit strings inside the holes afterwards to get a more realistic look!
The proposed solution is antenna winder which integrates UNUN in the center and contains two compartments, in first one thin coax cable such as RG174/U of length 2.5m and ended with BNC connector is wound, while in the second one the thin…
Slightly remixed case for a ESP32 with external antenna (works great with ESP32-WROOM-32U). I have messaged the original author and he's OK with posting new model. Added ventilation holes on both sides and modified the lid, which is now a…
Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters
background I started this model for my mother as a gift for her tennis friends. It took a little longer then I expected because the complicated sketch. customizing just open the file in Prusa Slicer or any fork (like Orca Slicer, Bambu…
Hello sports and music fans, combine your passion for both by showing off your favorite sport with one of these smooth and elegantly curved knobs. For the single piece set each has its own 🌀 wormhole styled base suited to its sport. Easy…
From May 2026 availabe mount for motor rev F5, TNX OK1GOD! Four predefined sizes (S,MS,M,XL) M size max torque 2200 kg/cm (215 N/m) without destroy Included terminal for install motor from cordless drill Without nuts (tapered holes) DXF…
Little Tennesee Vols sign I designed for a friend. Print however you like!
