1427 modeli
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…
Wydruk około 2,86 €–3,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Perfectly working on Prusa MK4 I recommend printing with 30% infill No supports Layer height 0.2 Pay attention to the nut component, I left a layer indicating the correct screwing position, see photo. Not tested on Prusa MK3/S/S+ I hope…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Sanding Block is useful for sanding inner Corners (example Picture Frames). The Lower screw will fix the sanding paper, the upper Screw will tension the Sanding paper. Cut your Sanding Paper into 50mm x 170mm stripes. Printed in PLA…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
If you own a lamp like this, you know how over time the springs on the stem get tired and no longer keep the lamp straight. This is a simple bracket designed to keep the lower arm straight, so it doesn't scratch the wall behind it. The…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tomatoes, cucumbers, beans, peas,... any vegetable that needs stakes, this tensioner is ideal for tightening the ropes of your climbing vegetables. I have been using it for a few years in my garden and it works great.
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here's a fix for a loosening tensioner dial on a Husqvarna Viking Daisy 335. The plastic bracket broke that held the tensioner dial bar so it moves forward enough that the dial will loosen as you sew. same bracket the lamp holder is…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
Please give it a ❤ if you like it 🥰 Here are from belt tensioner for the Creality Ender 3 design to re-use the stock screws. Video talking about it (FR): Everything can be printed without support but some z-hop while moving may be…
I made some changes to the original Design: Added Ender 3 version of Y-Axis tensioner Uses M4 screws and insert instead of M5 Made the bearing holders slide into their housings easier Extended the length of the bearing holders so the…
I made an X-Axis revision with belt tensioner and bearing clampings. It is inspired by the bear mod x-axis but fits with the normal Prusa extruder. The x-axis is also much stiffer than the original one. Additional holes for m3 screws to…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…
An upgrade on the automatic tensioner. When I put up a tarp, I like to set my “static” line to a tree and then pull in a direction away from that static line (in other words: toward the tarp), so I made mine have a 180 ° degree turn back…
Functional lock picks tensioner: 1mm or 1.5 mm tensioner thickness 1mm fits most locks but is less rigid than the 1.5mm version Works best on smaller locks with less opening torque Note: Longer side is for bottom of keyway tensioning and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
This is my first try to make a parametric model, this means you can change the model's size by changing a parameter. For this you have to open the .f3d-file in Fusion360. Then go to the “Modify”-menu and click “Change Parameters”. There…
This is an easy and fast to print model. It requires no support. You need to print 4 pieces and then you can shove them on you tensionbelt and they wont fall off. There are differerent versions for different belt sizes.
This is a simple, printable paracord tensioner based on a similar design that's usually sold and made from anodized aluminum. I haven't tested yet to see how much load it can support, but should be plenty strong for camping applications…
This design represents a dental floss holder that fixes the main problem of almost all floss holders - tensioning! Floss tends to stretch almost immediately, causing handling problems. My design uses a movable part that serves the…
Functional lock picks tensioner: 1mm or 1.4 mm tensioner thickness 1mm fits more locks but is less rigid than the 1.4mm version Works best on smaller locks with less opening torque Use stiffer materials such as PLA, PLA-CF. ABS or PETG…
Every single rope tensioner i have tried has failed, so i have designed my own. Fixed many issues from other designs No points of high stress - Have not done long term tests, but with prior experience, PLA will easily stand up to long…
History This part is actually a redesign of a surplus part to my magic strap buckle: https://www.prusaprinters.org/prints/84848-magic-strap-buckle-magnetic I got some feedback from a user that was very happy with the buckle, but had…
Here's my take on a fairly popular paracord tensioner. Simply tie a knot in the middle-sized hole, then loop a bight of rope through the large hole and around the small. (See pics for details) Check out my other rope tensioners! Rope…
Belt Tensioner for XY Axis on the Stock Creality Ender 3 Printer. For the Puller you can use a M5x30mm Screw. What need to be Printer: 2x - bearing_reduction 2x - tensioner_nut 2x - tensioner_puller 1x - X_tensioner 1x - Y_tensioner For…
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore --- I released a new version with only two screws --- Fits on Prusa MK3 MK3s MK3s+ Fasteners: 1x M3x20 screw 2x M3x10 screw 3x M3 hex nut 4x M3 Nyloc hex nuts 4x…
Updates: 16.11.2022 - add the X version for my linear rails. Test it with my custom mount but should work with an other models. PRINT SETTINGS 3-4 perimeters, 25%+ infill, a 10-15mm brim will help, outer part and knob could be from PLA…
I designed this to replace the existing rope tensioners that came with my tent. I've added three sizes, but you can scale the model as desired. Add some to your backpack in case of emergencies when camping or hiking or put a handful in…
Heyho :) Here is a tensioning device for the belt of the Y-axe. I have tested at least 4 different designs myself but was never really satisfied. Either the designs were too clunky, not nice to print, you had to drill holes or the…
Here's my take on the quintessential 3-hole paracord tensioner. Simply weave a rope through the three holes, then tie a knot at the end of the rope. This will allow you to hook the last “loop” around a post/stake and tension away! (See…
I just want to make the elegoo Neptune 4 max community lives a bit easier… i did not find on this site a Y axis belt tensioner stopper for my 4 max… but thankfully for the creators of thingiverse.com mk659 and SebastianRubner i was able…
What is galling? galling noun : a type of wear caused by friction between metal surfaces, often leading to parts sticking or seizing. Example: "Galling can lead to a nut and bolt binding under high pressure." adjective : extremely…
I recently noticed some cracks in the plastic of my Ender3 v2 X axis tensioner body around the front and back screws. And I really don't know why it happened.. I searched internet for a replacement part since I didn't want to buy the…
If you would like to support my efforts, feel free to buy me a beer Many people have struggled printing softer materials on the K2 plus due to the extruder chewing up these materials. Upon investigation, my belief is that the is, at least…
This is a belt tensioner for the x-axis of the Neptune 2 and 2S from Elegoo. Since the geometry and the structure of the X-axis differ greatly from the Ender, the complete body had to be rebuilt. Since the source data is not available, I…
All you need is a M4/M5 nut, I recommend nyloc type in order to prevent unscrew due to vibrations. Print settings: layer: 0.16mm or lower perimeter: 3 infill: 15% - 20%
Use case Print a solid number of these tiny tensioners for your next camping trip, to make sure you have plenty of them if you need them. At 1.75g per piece, it will not be a burden, even if you are on a hiking or biking trip. Print them…
A simple cord tensioner hook to be used for guylines, ridgelines or lines of any sort when camping or during other cordage-intensive activities. I use (and recommend) it in combination with my BEEFY TRI-LOBE TENT STAKE CAP for a killer…
Y Belt Tensioner for Kingroon Kp3s This is a belt tensioner design for kingroon Kp3s, it is easy to assembly. Este es un nuevo diseño de tensor para el eje Y de la kingroon Kp3s, muy fácil de montar Other mods for Kingroon KP3s You can…
Once you printed the two piece you will need: -2 M4x8 bolts. -1 M4x30 bolt and nut -2 F688ZZ Flanged Radial Ball Bearings (cheap at Amazon)
An exact copy of the gcode simulation (minus some text) as a parametric & solid
Simple tensioner for a tent guyline or paracord. I have tested the uploaded 3MF/STL files with 550 paracord (~4 mm diameter) as well as narrow tent guyline (~2 mm diameter) and it holds well. Should you need a different size, the source…
After replacing my X axis Belt tensioner I decided to change my Y axis belt tensioner too. Yet again another Quick'n Dirty remix of Cornaly_Cool's design https://www.thingiverse.com/thing:3289057 . You will need to use the original bolts…
6 spacers from 0.4 to 1.2mm thickness to loosen the extruder spring on the K2 Plus when printing with TPU filaments. Recommended to print in PETG, ASA or ABS due to being close to the hotend. Easy to install. Just pull the extruder tab to…
I needed a sturdy and small rope tensioner, so this is that. The arrows on the inside mesh with the roller, so that it can't spin freely once the rope is in the seated position. It is surprisingly strong. The clearence might be too tight…
Please see my video on how to print and assemble: https://youtu.be/_eJe7B8Vqws Parts list for one CFS unit (4 spools) 4× standard POM wheels 4x M3x20 screws 4x M3xL3OD4.5 heatset inserts • A complete set of four tensioners even fits on…
Y Axis Belt Tensioner Body for Ender S1/ S1 Pro to replace mine when it cracked. This replacement slides into the extruded rail to provide additional stability. +2/22/2025 Added File Ender3S1_GCR_Belt_Tensioner_Body_v8 specifically for…
Ender 3 or similar belt tension system. You can use Mellow pulley or cheap chinese pulleys (use spacers accordingly). Screw in M4 screw in “BELT_TENSIONER_INSIDE” part, length as needed. For belt tension use my belt tension knob from:…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament brand: 3D Solutech Filament color: steel Filament material: PLA
For 9 mm belts, print from PETG Prusament like original model
No need to run to the store or browse amazon for this one - just some glue and filament hold it together. Smooth operation. Easy and quick upgrade. Long lasting. No belt wear. Increases belt's grip on pulley gears. Clips to the top rail.…
I have designed a simple rope tensioner for camping.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** The cool paracord tensioner that @SD-3D created…
Based on https://www.thingiverse.com/thing:3289057 by Cornely_Cool, with only one modification: The top section towards the bed is cut away smoothly, to allow for the full 235 mm movement range on the Y axis / bed. Only works with the…
Designed this Minimalist x axis tensioner for my ender 3, i made it as small as possible to not have a distracting look when installed on the printer. It tensions using an m3 bolt/nut and an allen key. A couple notes: Since this is…
** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…
---------------------------------------------------------------------------------------------------------------- Greetings everyone, and thank you for joining me to explore my Auto Tensioning Spool Donor Mod. This innovation exerts…
To tension the Y-belt just turn the adjustment knob. Designed for the GT2-20 pulley (15mm diameter) with 3mm axis. Printed with PETG, 15 % infill, 0,1 layer height recommended, 4 perimeter, no support needed. You need for installation the…
I recommend printing it in ABS, but PLA and PETG will work just fine. Its designed to be printed supportless, when you print it like a tower.
My tension lever cracked on my Ender 3, leading to under extrusion problems. This is a replacement part that I designed to not require any changes. The bearing screw hole is slightly undersized to allow the screw to thread into the…
Belt tensioner for ender3 based on this design. I remixed it to use an m5*10mm screw and T-nut to secure the tensioner. I also used an m8*25mm socket cap head screw instead of the original button head. I hope you like the models! If you…
cord tensioner.1 = grey one cord tensioner.2 = orange one Layer height: 0.2mm Wall thickness: 1mm Wall line count: 2 Infill: 100% Skirt/brim/raft: No Support: No
As I learned, the Y Axis Belt Tensioner Stoppers are absolutely mandatory for the Elegoo Neptune 4 series. The belt tensioner already looses while you print something… I have therefore adapted the dimensions of the familiar models and…
Love the remix that Comrade 3D did, but I needed to add a built-in tensioner to flatten out the wrap as it's being rolled. The existing model is great, but I found I needed a 3rd hand to keep things tidy - this remix is to help with that!…
This X axis belt tensioner is far easier to use than the stock Creality tensioner when doing maintenance. You can use the two stock bearings, M8 x 1.25 x 25 “axle” bolt, and one of the M4 socket head screws and t-nuts. Additionally, it…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
Use this tool to tighten and tension paracord. Great for pitching tents and quickly, but securely, fastening cord. This has been a common commercial camping product for years, typically made in aluminum, but I redesigned this one to be…
The frame of the tensioner ist bolted to the x-gantry. That makes it stiffer and it fits better to the aluminium bar. It also doesn't twist while the printer is moving along the x-axis. New parts required: 1x DIN M8 Screw 30mm or longer…
Required parts: 2x M5 x 16mm 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings The washer should go between the top bearing and the printed adjuster. Snug the M3 x 12mm screw, but do not tighten it. The bearings should spin freely. If you don't…
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
This tensioner helps to maintain a good synchronisation between the two lead screws. That keeps the X gantry parallel to the bed during a print but also and especially between prints when the stepper motors are off. So the layers stay…
Gopro Action Camera Extension Mounts - Estensione per Gopro Type A Type B Type C (update 06/02/2025) Type D (update 04/06/2025 22/06/2026 Update 19/08/2026 Added GoPro_Ext B 300mm Suitable for: Resize to adjust dimensions All our designs…
The only rope tensioner you will ever need 2 - electric boogaloo: Now fully parametric! - most aspects are constrained, and i have narrowed down the parameters to only 5 2 Designs with, or without pinching center Removed teeth from V1 but…
Y-axis belt tensioner for standard gt2 20T or toothless idler with 3mm bore Fits on Prusa MK3 MK3s MK3s+ Fasteners: 2x M3x10 screw 2x M3 hex nut 2x M3 Nyloc hex nuts 2x M3x16 screws 1x 3x22 mm cylindrical pin (ISO 8734 / DIN 6325) or cut…
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Increases visibility and access to the X axis belt idler to check for alignment or shimming. For Ender 3 V2 Neo (and possibly Ender 3 S1 ) Includes two inner parts for long or short belts. I recommend printing both and checking which one…
As suggested by several makers of Filarte3D's model, the closing force of the arm can be increased by moving the arm outside of the model - essentially bending the arm outward. This is exactly what I did - resulting in this model. After…
DISCLAIMER: In my testing I haven't been able to get it to reliably work with paracord yet! Every other rope I tested works great, paracord just seems to slip under load at some point. Please be aware. Directional Locking Mechanism:…
A remix from: https://www.printables.com/model/339122-camping-accroche To be fair, Arthur's model works perfectly well. I printed it at 1500% based on some comments and it held the cords strong. I just wasn't a fan of the long teeth which…
Description I was replacing the clothesline with a new rope but the old tensioner was rusty and wouldn’t work. This is the replacement that can be used with up to half inch (12mm) rope. You may need to manually rotate the cams to lock…
Very strong automatic rope tensioner (tested with 28kg for the 4mm paracord version without any damage with PLA material). You can print it directly in place, without any support. Four versions are available -> 3mm, 4mm (paracord), 6mm…
UPDATE 18/08/2019 Es ist besser die Umlenkrolle von Prusa gegen eine gleich mit zwei Lagern zu tauschen, da die Originale bei richtungswechsel das Schlingern anfängt. It is better to exchange the pulley from Prusa for one with two…
Howdy, This is my take on a super simple camera mount. It easily slips over the Z-Axis belt tensioner on an Ender 3 V2. I have no idea if it will fit any other printers. Just uses a regular camera tripod mount screw through 6mm hole to…
Tensioner, in Line or also swivel for connector or screw terminal end for 6mm GT2 Belt
I took inspiration from my tent and tarp experience I have and designed this paracord rope thigthener. ITS MAIN feature is that you can use it without looping the rope through it; just slide the rope in from the side, and you are ready to…
UK: Belt tension gauge so you are sure you have tensioned the belt perfectly... DK: Bælte Spændingsmåler så er man sikker på man har spændt Bæltet Perfekt op… Printer settings: Filament: PETG Layer: 0,15 Nozel: 0,40 Infill: 0,20 Support:…
Use this simple part to tighten lines for tents, tarps, or ridgelines. Scalable to any diameter line you need. No support needed.
Yet another belt tensioner for Ultimaker 2 Category: 3D Printer Accessories
This is a remix of the y-axis idler mount from the Prusa i3 Bear Upgrade that fits on the stock Prusa i3 MK3 frame. Installation Remove the LCD assembly from the front plate Remove the front plate and existing idler mount from the printer…
These three hole rope tensioners are great! I couldn't believe this model wasn't already on thingiverse. Use them for any rope. Tents etc. Category: Sport & Outdoors
I was looking for a slick, quick printing and reliable rope tensioner , to set up my drone gates (Which will be here for download soon!), but I could make out only one design, which I found worth trying. Unfortunately this suffered on…
Materials required 2pcs Bearing 2 m5x35mm screws 2 m5 nuts You can buy me a coffee if you like. https://ko-fi.com/budos
Creality Ender 3 Pro Y belt tensioner upgrade. Not my model, all credit to SkymanOne Uses mostly stock hardware. Requires a slightly less than 30 mm long M4 screw and a nut for the pulley. Strong prints and easy to use. Eliminate backlash…
I have broken a belt tensioner piece for my Neptune 4 Pro printer, so I designed a replacement piece. The new piece uses
I needed a very easy to use Tarp rope tensioner so I decided to make my own and I liked it :-) Very strong, light weight and small so great for Ultralight Backpacking Suitable for use with 3mm diameter rope. (scale down model to 90% for…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![#0179 [UPDATED] Automatic Paracord Tensioner for Clotheslines [spring loaded, for 4mm cord]](https://media.printables.com/media/prints/962702/images/7581598_122262e0-2234-49ee-be2c-d0307a9276db_a2d9492a-091a-48f9-9736-3e0258748626/rl-20240819-011.jpg)
![[v2] Prusa i3 MK3 Y-axis belt tensioner](https://media.printables.com/media/prints/234849/images/3113926_f8d8cf96-2d9f-404a-8be8-9adc1cbbcc45/pxl_20230115_020616822.jpg)
