P
Printablestippfehlr
Radio/Transmitter Stickends, M3, TX12 (MKII), hybrid / thumb
printed in PLA, probably could be printed in TPU as well. Try printing without support.
- Pobrania
- 141
- Polubienia
- 8
- Ocena
- 5
Wyniki wyszukiwania: tx1
Liczymy pasujące modele…
P
PrintablesVoltex
Improved Radiomaster TX16S Gimbal Protector
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
- Pobrania
- 1111
- Polubienia
- 69
- Ocena
- 5
P
PrintablesCybuster
Radiomaster TX12 Guards
0.2MM, no support required
- Pobrania
- 805
- Polubienia
- 58
- Ocena
- 4,75
P
PrintablesspectrexFPV
Radiomaster TX15/TX15 Max Gimbal Stick Protector
What should've come with the radio... Features Fits both stock (10mm) and wider stick ends up to 16mm in diameter Full protection on toggles and dials Anti accidental power-on Customisable name plate area Recommended Print Settings…
- Pobrania
- 685
- Polubienia
- 31
- Ocena
- 5
P
PrintablesCybuster
Radiomaster TX12 Guards v2
Gimbals and Screen protector for Radiomaster TX12. Added - bridge between the Gimbals Guard - 2 x Antenna mount Recommend TPU-95A. PLA/PETG also works. No support needed
- Pobrania
- 537
- Polubienia
- 42
- Ocena
- 5
P
Printableskonfetti
Wall mount for Teltonika RUTX09, RUTX11, RUTX12 and similar
The wall mount is designed to keep the router securely in place, in my case in a camper van. Compared to the model I remixed this from, this mount uses much less material therefore prints much faster and is designed as a snap-on: a tab…
- Pobrania
- 454
- Polubienia
- 23
- Ocena
- 5
P
PrintablesQrome
Radiomaster TX16s Gimbal Covers
Joined gimbal covers for the Radiomaster TX16s radio. These are printed in PLA with a color stop part way. Black Hatchbox PLA: https://amzn.to/3sOiSnG Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution:…
- Pobrania
- 429
- Polubienia
- 43
- Ocena
- 5
P
PrintablesBrandoN3D
Radiomaster TX12 Battery Lid
My battery lid snapped at the hinge nubs. So I modeled this! It sits slightly below surface of controller for easy printing on a flat surface. To install, put one nub into the controller and bend the lid inwards so that the other nub can…
- Pobrania
- 410
- Polubienia
- 10
- Ocena
- 0
P
PrintablesHans Schulz
Fujitsu Primergy TX1330 M1 2.5" HDD Caddy
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
- Pobrania
- 349
- Polubienia
- 15
- Ocena
- 5
P
PrintablesAnton
Radiomaster TX16S gimbal protection EZ to print
Did not like what I saw on thingiverse. 3D printers don't print very nice in the air, especially when you want ABS, HIPS, ASA, anything other than PLA, so I designed my own, where you can print it out of separate pieces and assemble it…
- Pobrania
- 334
- Polubienia
- 14
- Ocena
- 5
P
Printablespiero menetti
Radiomaster TX16S gimbal and sticks protection NEW!
Protect gimbals and front sticks. New version with upper stick protection! Assembly the two parts with pressure, once in right position the upper part rotates freely. Insert the gimbal protection first, then rotate the other part: on the…
- Pobrania
- 332
- Polubienia
- 29
- Ocena
- 0
P
Printablesgrizzie17
Gimbal Protectors for Radiomaster TX16S
Gimbal Protector for the Radiomaster TX16S I have larger Gimbal Stick-Ends than the stock stick-ends. I wanted a Gimbal Protector that would fit over those but also fit in the Radiomaster TX16S case (the one that comes with the…
- Pobrania
- 321
- Polubienia
- 17
- Ocena
- 4
P
PrintablesRonny Sandslett
Quick mount mobile holder for the Radiomaster TX16s
Quick mount mobile holder for the Radiomaster TX16s. Holds a mobile phone or similar (63 - apx. 90mm width) for use with Qgroundcontrol and Ardupilot or similar. Hardware: 1pcs apx. 60mm long 4.5mm (max 5mm) spring in tension. 1pcs…
- Pobrania
- 270
- Polubienia
- 39
- Ocena
- 0
P
PrintablesLenny B FPV
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (normal & AG01)
!UPDATED!: V2 Radiomaster Tx16s Gimbal protector (also fits for AG01 gimbals) Combined and Single Version Perfect fit with all Materials. I used PLA Please like if you downloaded it :-)
- Pobrania
- 265
- Polubienia
- 16
- Ocena
- 3
P
Printablesmaxedout22
Radiomaster TX16S MKII Printable Case
I've been looking for a good box for my TX16S for some time. Either very expensive or just simple polystyrene. Here is my own box. Very easy to print, Rock Solid and Perfect Fit!!! I do not use the internal module. Therefore no fixed…
- Pobrania
- 263
- Polubienia
- 26
- Ocena
- 5
P
PrintablesAirwaves Ted
Radiomaster TX16s Stick protector.
Yet another transmitter stick protector model! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm or better Infill: 5% - 10% Category: R/C Vehicles
- Pobrania
- 254
- Polubienia
- 14
- Ocena
- 5
P
PrintablesAerialFox
TPU Gimbal Protector Radiomaster TX15
Might look like the protector from the RM Boxer but is constructructed for the new RM TX15.
- Pobrania
- 243
- Polubienia
- 14
- Ocena
- 0
P
PrintablesDurahl
FrSky Horus X12S - Radiomaster TX16 IPS Touchscreen Backing Plate
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
- Pobrania
- 226
- Polubienia
- 6
- Ocena
- 5
P
PrintablesMr4th
Radiomaster TX16S gimbal stick (M4)
Sticks for TX16S M4 (no threads). Good grip for hybrid/pinch style. You are welcome to remix.
- Pobrania
- 226
- Polubienia
- 17
- Ocena
- 0
P
PrintablesEldenroot
Radiomaster TX16S MKI/MKII gimbal protection
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
- Pobrania
- 214
- Polubienia
- 19
- Ocena
- 4,33
P
PrintablesMegaCadler
Pulttray for Radiomaster TX16S
This is my Pult Tray for Radiomaster TX16S transmitter. The parts named "Aloy_..." shall not be printed but rather made of Aluminium for best robustness. The Leather Applications are not required but make it comfortable and look…
- Pobrania
- 212
- Polubienia
- 20
- Ocena
- 0
P
Printablesphilb59
Radiomaster TX16S Transmitter Tray
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
- Pobrania
- 187
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMotti Shonak
Radiomaster TX16S case handle remix
I remix the original handle and put hole for screw and tightening nuts. Use a plug on one side of the handle for a good alignment
- Pobrania
- 179
- Polubienia
- 29
- Ocena
- 0
P
PrintablesTheRealJocki
Radiomaster TX16S Pult faltbar | Console foldable
Die Pultbasis wird mit dem Rückteil des Senders verschraubt. Ich habe hierfür M3-Einschmelzmuttern in den Druckteilen verwendet. Der Sender muss zur Montage geöffnet werden (4 Schrauben hinten, 2 bei der Antenne) - Anleitung als…
- Pobrania
- 174
- Polubienia
- 16
- Ocena
- 0
P
Printableslucpolak
Radiomaster TX16S MK3 MAX Gimbal Protector
Gimbal protector designed for the brand new Radiomaster TX16S MK3 . Tested and validated on the MAX version . This accessory helps protect your gimbals during transport and storage, preventing unwanted movement and potential damage. 📦…
- Pobrania
- 168
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSempervis
Radiomaster TX16S wall-mount
For maximum strenght you should print it standing up with supports under the hooks
- Pobrania
- 162
- Polubienia
- 12
- Ocena
- 5
P
PrintablesNordfpv
Radiomaster TX16S gimbal protection
A very simple gimbal protector for the Radiomaster TX16S with holes big enough grand lotus stick ends Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 200 Infill: 25 Filament: EcoJake PLA Doesn't…
- Pobrania
- 149
- Polubienia
- 14
- Ocena
- 0
P
PrintablesFluke
Fluke's TX16s Replacement Parts
Designed for printing in ABS @250C through a 0.4mm nozzle at 0.2mm layer height. Print with button face on print bed. Supports will be required for some areas, and finishing may be required on the retaining flanges due to the print angle…
- Pobrania
- 148
- Polubienia
- 26
- Ocena
- 0
P
Printablesmaltvat
RADIOMASTER TX16S BATTERY SPACER
This is a simple spacer to keep the 18650 battery holder from moving around and possibly damaging the power cables going into the radio If you ever plan on keeping your radio in your car I suggest you do not print this in PLA. I printed…
- Pobrania
- 145
- Polubienia
- 27
- Ocena
- 0
P
Printablesdg fpv
radiomaster tx12 gimbal protection
i disliked all the gimbal protections i found online so i designed this one…
- Pobrania
- 144
- Polubienia
- 9
- Ocena
- 0
P
PrintablesTechBytes.ca
Radiomaster TX16S Battery Bay Cover
A Remake of the original Radiomaster TX16s Battery Cover with TB Logo. Original Make credit to Radiomaster RC. Unable to make this as a remix due to link being unavailable currently. Hope you enjoy. https://techbytes.ca/3dprints/ IG:…
- Pobrania
- 141
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMadMax7774
RadioMaster TX16S Battery adapter for 5000mah Li-ion
A spacer to keep the 5000 mah lithium-ion battery from banging around in the battery tray. This will keep everything locked in place.
- Pobrania
- 134
- Polubienia
- 13
- Ocena
- 5
P
PrintablesHugo Pigeassou
Radiomaster TX15 TX15 MAX protection inter
proction pour inter Radiomaster tx15 tx15 max
- Pobrania
- 133
- Polubienia
- 7
- Ocena
- 5
P
PrintablesNidomiro
Fujitsu Primergy TX1320 M3 Server 2.5" Caddy Tray
Works for Fujitsu Primergy TX1320 M3. Tool-less installation of 2.5" drives. My print settings: 0.6 Nozzle 0.25 mm Layerheight Fill pattern: Rectilinear Fill density: 50% Brim type: Outer brim only Brim width: 2 mm The Model:…
- Pobrania
- 133
- Polubienia
- 15
- Ocena
- 5
P
PrintablesNaiki
Teltonika RutX11 Router - (Wall) mount - incl. step & F360 File
A simple mount for Teltonika RutX11 router/modem with mounting holes. You have to print: InnerClamp OuterClamp The other two files are for those who want to modify Print Settings Printer: Kingroon KP3S Rafts: No Supports: No Resolution:…
- Pobrania
- 125
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLukáš Ráček
Radiomaster TX16S My Rear Grips
My remix of the original grips, which are more ergonomic for my hands.
- Pobrania
- 123
- Polubienia
- 11
- Ocena
- 5
P
PrintablesDoukDouk
Radiomaster TX15/GX12 Radio Multi-Stand (FREE version)
The device is designed to make it easier to hold the radio during flights. This makes flying your drone much more comfortable and takes the pressure off your hands. It has a folding mechanism that takes up almost no additional space when…
- Pobrania
- 119
- Polubienia
- 25
- Ocena
- 5
P
PrintablesPiotr Markiewicz
Radiomaster TX16S antenna mod
This is top plate to install SMA connector in TX16S. Best connector will be one with additional screws on side. For easy print top part is flat. Print requites support.
- Pobrania
- 118
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKajukembo
Tapa modulo externo RadioMaster TX16s
Si pierdes o se te rompe la tapa del modulo externo ya tienes repuesto.
- Pobrania
- 113
- Polubienia
- 12
- Ocena
- 0
P
Printablesjorki
GPU stand GTX1060
Introducing the custom-designed GPU stand specifically crafted for the NVIDIA GeForce GTX 1060. This sleek and sturdy stand is the perfect solution for securely mounting your GPU, providing both stability and efficient cooling for optimal…
- Pobrania
- 110
- Polubienia
- 7
- Ocena
- 0
P
PrintablesZokol
TX16S wall mount
I wanted small wall hook for the radio, and could not find good alternative, so here is my own design. This wall mount was designed for CNC-upgrade handle, but should work with the original as well. Print Settings Printer Brand: Prusa…
- Pobrania
- 107
- Polubienia
- 14
- Ocena
- 0
P
PrintablesNyptus
Radiomaster TX15 Sticks Protector
Protective cover for Radiomaster TX15 sticks during carrying the remote outside the kit bag. Protector is mounted using the belt loop. Material: PET-G / PLA / ABS Supports: NO
- Pobrania
- 106
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMadMax7774
RadioMaster tx16s External Module Cover (replacement)
remixed the original to make it stronger.
- Pobrania
- 102
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGizmotoy
Foam replacement for Spektrum SLT3 and Arrma ATX101 transmitters
I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…
- Pobrania
- 102
- Polubienia
- 24
- Ocena
- 3
P
Printablesphilb59
Radiomaster TX16s gimbal protector
Gimbal protector for 10.5mm diameter gimbal stick
- Pobrania
- 84
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKajukembo
Tx16s Antenna brace
Para todos los que tenemos esta radio creo que es imprescicndible.
- Pobrania
- 83
- Polubienia
- 14
- Ocena
- 5
P
PrintablesDad
Teltonika RUTX10 Wall Mount Clip
This is a clip to mount a Teltonika RUTX10 router on a wall, backboard, or other surface. Mount with the release tab facing up. PETG recommended for flex and heat resistance. I have not tested it with PLA, but PLA will probably work as…
- Pobrania
- 82
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJeremy-FPV
Radiomaster TX16S/Mark II Sticks
You need also M4 Melt thread
- Pobrania
- 82
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKajukembo
Tapa bateria de RadioMaster TX16S
Si pierdes o se te rompe la tapa de la bateria de la RadioMaster TX16s ya tienes de repuesto.
- Pobrania
- 82
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLuis Loreto
Radiomaster TX16 MK3 tray
The tray its designed to be fixed to the M2.5 screw inserts includded in the case of the Radiomaster TX16 MK3, no modifications needs to be done to the transmitter; just print and add two M2.5 screws to fix the tray to the transmitter,…
- Pobrania
- 81
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJoza
Joza TX130 quadcopter frame
After fooling around with 5" and a whoop, I decided to build a 3". But what fun would it be to design my own frame? Well, it worked out awesome. The frame is a TrueX, 130mm motor to motor. Overall weight (including props, battery strap,…
- Pobrania
- 77
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSomnus
Fujitsu 3.5 caddy and 2.5 adapter with lock for Primergy TX1310 M5 and Celsius W520 series
Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…
- Pobrania
- 76
- Polubienia
- 2
- Ocena
- 4,5
P
PrintablesMDrifterX3
TX16s Gimbal Protection + X9D+ SE Stick Ends switch/no switch
This is the gimbal protection remix designed because I have the x9d+ SE hall gimbals on my tx16s, and also wanted switch protection since I use a kwad bag. BIG THANKS TO: Tekniqueman with the original protection found here…
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 5
P
Printablesmaramao
Radiomaster TX15 Skadis Mount
A bulky mount to hang your TX15 on a Skadis board, the file is tall because the radio seems to have a tendency to tip over, there are two versions, one with square bottom and one curved
- Pobrania
- 72
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMiszaFPV
Radiomaster tx16s mk3 gimbal protector
Simple gimbal protector for easier carying in bag without need of using bulky case
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
Printablesphilb59
Radiomaster TX16S gimbal stick protector for <8mm stick
Protects Radiomaster gimbal sticks with a diameter less than 8mm
- Pobrania
- 71
- Polubienia
- 3
- Ocena
- 0
P
Printablesjjwrobleski
Radiomaster TX16S Mk II Gimbal Protector
This is a single-piece gimbal protector for the Radiomaster TX16S Mk II transmitter. It fits over the sticks and lightly clips into the neck strap fitting. The model prints well in either PLA or PETG with 5-10% infill and supports on the…
- Pobrania
- 70
- Polubienia
- 2
- Ocena
- 0
P
Printables3DiXY
Radiomaster TX16s TPU protective inlay
Inlay for the Radiomaster Large carry case to house the Radiomaster TX16s better then original. Suggested is to print it in TPU which will give a nice and soft protection. it has room enough for an external TX including its mounted…
- Pobrania
- 69
- Polubienia
- 10
- Ocena
- 0
P
PrintablesspectrexFPV
Stick Cam Mount for Radiomaster TX15, TX16S MK3 and GX12
Features Fits perfectly for anything with a GoPro mount Great overall stiffness to prevent shaky footage Fits nicely inside your carrying case for the radio Quick-release design - no need to unscrew all the way and have 2 loose screws!…
- Pobrania
- 69
- Polubienia
- 7
- Ocena
- 0
P
PrintablesQrome
TX16S Folding Stand Extender and Module Protector
The Radiomaster TX16S with the folding stand is great. I am using the TBS Tracer module and the stand taps the bind button on the back of the radio and at times can be a little annoying. I also don't like the idea of the module being…
- Pobrania
- 66
- Polubienia
- 12
- Ocena
- 5
P
PrintablesKeith Luneau
Slider Levers for T16 and TX16S
These are replacement "levers" for the sliders on the T16 and TX16S. Not being a fan of the short stock ones when using them for pan and tilt on my FPV planes, I wanted something longer. Andrew Newton posted a design for some thicker ones…
- Pobrania
- 65
- Polubienia
- 8
- Ocena
- 0
P
Printablesp8ght
Fujitsu SFF Caddy (Primergy TX1320 M4)
Insert and fixate (using superglue) a small stainless-steel/aluminium rod for the hinge-mechanism (only on the outer! hinge-parts). Be careful using the hinge – push the caddy completely in, before locking it. I tried to replicate the…
- Pobrania
- 64
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPat
Under-cabinet mount for RUTX11 router
This is an under-cabinet mount for the Teltonika RUTX11 router. It simply snaps in place. I tried to design it to promote air flow and cooling. I'm not sure how hot this router can get and whether that might pose an issue for the mount's…
- Pobrania
- 63
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCombinacijus
TX16S Magnetic Hawkeye Monitor Mount 3.5inch
Fusion 360 file included! It's a magnetic mount for TX16S and Hawkeye 3.5inch FPV monitor Short demonstration video: https://youtu.be/c1FKlvVu_cY Printing: Open stl, split to objects/parts (there are 2 parts), orient as in photo and…
- Pobrania
- 63
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTerminal_6
Planetside 2 TX1 Repeater 1:1 Static Model
This model of the Terran Republic's TX1 Repeater has been split into parts for your convenient printing. The parts are intended to be glued together. That's all there is to it.
- Pobrania
- 63
- Polubienia
- 11
- Ocena
- 0
P
Printablesgrizzie17
TX16S Battery Spacer
This was inspired by 'maltvat' https://www.thingiverse.com/thing:4681214 This is a new design not just a remix. The previous design by 'maltvat' does not always easily come out. This design has a bit more play and a little handle that you…
- Pobrania
- 63
- Polubienia
- 7
- Ocena
- 5
P
PrintablesKingmiwok
Radiomaster TX16S Switch Nut Wrench
A tool to remove the nut from a Radiomaster TX16S switch. No idea how long it will last, but it works and gets the job done. Printed with 2 walls, with an alternating extra, 60 pct infill.
- Pobrania
- 61
- Polubienia
- 4
- Ocena
- 5
P
PrintablesKajukembo
Empuñaduras laterales RadioMaster TX16s
Repuesto de las Empuñaduras laterales RadioMaster TX16s.
- Pobrania
- 61
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNOX
capot ventiler radiomaster tx16s
capot avec ouverture sur le dessus pour : radiomaster tx16s
- Pobrania
- 61
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKarlos
Radiomaster TX16S Longer Slider
Původní boční slidery mi zrovna moc nevyhovovaly. Vytvořil jsem tedy lehce delší verzi. Základní je o cca 2mm delší. Další verze jsou vždy o 1mm delší. Já používám tu základní verzi. Tisknuto z PETG. Tisk s podporami na podložce. Na…
- Pobrania
- 59
- Polubienia
- 13
- Ocena
- 0
P
PrintablesDji Silesia
Radiomaster TX16S MKII antenna plate
A simple plate for Radiomaster TX16S MKII that allows to remove stock antenna mounting if using only JR Bay as radio module.
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMatěj Soukup
Fujitsu Primergy TX1320 M3 2x 3.5" cage
Option 1: fujitsu_primergy_cage_fan.stl fujitsu_primergy_cage.stl Cage can carry 2x 3.5" HDD drives and 2x 2.5" HDD/SSD with caddy Required parts: 8x heat insert nuts (5x3x5mm) 8x M3x8 screw 70mm fan Option 2:…
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKajukembo
Placa frontal superior RadioMaster TX16s
Placa frontal superior RadioMaster TX16s
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJRocher
Radiomaster TX15 battery case holder
Remixed the 18650 case holder to fit Radiomaster TX15 radio. It should be printed with TPU filament.
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 5
P
PrintablesPiotr Markiewicz
Hook for wall mount Radiomaster TX16S
No support required, just needs two M3 screws.
- Pobrania
- 50
- Polubienia
- 5
- Ocena
- 0
P
Printablescg.mllr100
Radiomaster TX16S EPP case handle (added M5 threads)
This is a remix of an already great design. I did not want to cut large holes in my case so I added M5 threads into the base of the handles to assist the glue in holding the handles on. I also created an alignment template (PDF) that can…
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
Printablesfprocess
Teltonika RUTX11 Mini Rack 10" 2U mount
Rutx11 Mini Rack I designed a mini rack support for the Teltonika RUTX11. To fit correctly in the mini rack, I designed it to be 2U with a cable outlet. It is printed in PETG, 0.25 Draft, vertical with organic support. It can be printed…
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJfae
Radiomaster TX16S - Vibration Motor Mount
This is the replacement Part for the TX16S Vibration Motor. It covers the hole motor and can be used with the standard screws. I drilled the holes with a 2mm drill. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No…
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJack Lenders
TX16S mount for removable long range antenna 8db
Radiomaster TX16S antenna plate for a long range 8db 2.4 Ghz antenna. At the same time making the antenna removable in case you want to replace your stock antenna. I made it so that it's easy to print with a flat bottom. It wil take the…
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIonut Dumitrache
La Crosse thermo humidity tx141th sensor shield cover
La Crosse thermo humidity tx141th sensor shield cover. I printed the main body upside down with no supports on my Bambu Lab X1 Carbon printer.
- Pobrania
- 46
- Polubienia
- 10
- Ocena
- 0
P
PrintablesNaiki
Teltonika RutX14 Router - (Wall) mount - incl. step & F360 File
A simple mount for Teltonika RutX14 router/modem with mounting holes. You have to print: InnerClamp OuterClamp The other two files are for those who want to modify Category: Office
- Pobrania
- 45
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDM4DS
26650 LiIon / LiPo / LiFePo - TX16S Battery Lid
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…
- Pobrania
- 45
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJason H.
Radiomaster TX16S Battery Tray
I got tired of having my battery move around inside the back cover of my radio, so I did something about it. This battery tray is specific to the aftermarket 3000mAh rectangle packs. It holds it securely in place but still allows for easy…
- Pobrania
- 45
- Polubienia
- 10
- Ocena
- 0
P
PrintablestheFPVgeek
RadioMaster TX16S Antenna Plug and Switch Plugs
Removed the built-in antenna and top switches on my Radiomaster TX16s and needed to plug the holes. Printed in TPU. Category: Other
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKean
Zotac GTX1070Ti Mini fan shroud
In the “because I can” category… When the stock fan on my Zotac 1070Ti Mini failed, I got a replacement from inRobert. It turns out I ordered a 1070Ti fan instead of a 1070Ti Mini fan. The only difference is that the diameter of one of…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
Printablesdennis
Simple RUTX11 Wallmount
Designed for the RUTX11. Required screws: 2x countersunk screw (4.5x25mm) Assembly included.
- Pobrania
- 33
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAndrew Matros
Radiomaster TX16s MKII AG01 gimbals guard
I was dissatisfied with all of the available models. They were either too complicated or did not fit the AG01 gimbals. So, I made my own version. The cups fit the AG01 with fully extended sticks. For the TX16s MKII, they can be connected…
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesCombinacijus
TX16S Hawkeye 3.5inch Monitor Mount
V2 Hawkeye mount design with Fusion 360 files No supports and no brim needed Held by friction Requires 3pcs M3x12 (2 screws for TX16S and 1 screw for monitor) 3 slots in radio mount currently has no use but it's left in case later mounts…
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKajukembo
Empuñaduras traseras RadioMasterTX16s
Repuesto de los Empuñaduras traseras de la RadioMaster TX16s.
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTriple Helix Robotics
Gimbal masks for Radiomaster TX16S
These 3d printable plates replace a stock part and limits joystick inputs to a particular shape. Each mask works on both the right and left sticks. The pictured example was printed from PETG with supports at 0.1mm layer height and 30%…
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesArthur_C
Radiomaster TX16S MK3 - Right/Left slider lever redesign
Although the RM TX16S Mk3 is a decent enough radio, the right and left slider levers are horrible. I use these as throttle for a F5J glider (and other gliders) and in case of quick response (during approach or low altitude) my finger…
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAnthonyH
TX16S Model Placard
Sometimes you just need a little reminder of what you programmed all the switches to do. This helps for a quick glance, especially as a pre-flight reminder. Print a few for your different configurations, or print one and swap out the…
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesManbehindthemadness
RaspberryPi 3/4 + 5.8ghz VTX receiver for the RadioMaster TX16s
https://github.com/manbehindthemadness/MavPi
- Pobrania
- 26
- Polubienia
- 9
- Ocena
- 0
P
Printablescblackburn1099
TX16S & TBS Crossfire Battery cover
Same print settings for the original cover, I added a strap mount holder so that I can strap my 3S LiPo to the TX 16S for using with my full crossfire module. Category: Replacement Parts
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPilot Extreme
Radiomaster Tx16s CNC Handle Leg Rest
Radiomaster Tx16s Leg Rest for the CNC Handle version. Still easily removable. Super comfortable and the radio angle is good for your wrists. All credit to the original creator https://www.thingiverse.com/thing:4596611 Print Settings…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesManbehindthemadness
RaspberryPi Zero 2 + 5.8ghz VTX receiver for the RadioMaster TX16s
https://github.com/manbehindthemadness/MavPi
- Pobrania
- 25
- Polubienia
- 6
- Ocena
- 0
P
Printables_125 RUS
Защита стиков на аппаратуру RadioMaster TX15
Удаляйте поддержки на тумблерах, на фото обведены зелёным.
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGrimka
TX800 / TX1600 secured mmcx
The goal is to hold the mmcx in place to avoid any unplug during crash (and vtx burn)
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJK
TX16s Case Li-Ion Holder
Hello everyone! (ツ)╯ I designed a Li-Ion holder for the Radiomaster TX16s case (Fig. (A, 4)). It is for carring four Li-Ion 3,7V batteries (Fig. (B, 1), (C, 1)). It is specifically designed to use with protective casing for the…
- Pobrania
- 21
- Polubienia
- 8
- Ocena
- 0