Liczymy pasujące modele…
The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! NOTE: I don't have an R1 to test. The R1 has the same screw pattern and…
This is a fingertip mod for the VXE R1. The weight comes in at 26 g when printed in PLA using my settings. Please let me know if you have issues with the mod, so I can fix the design. At this moment I have only tried this mod on the R1…
In the photos you can see the stl file and the optimal position to print (at least in my printer, Ender 3 v2).
Set of TPU inserts to adapt Volador VX3/VX3.5 aluminum camera mount for DJI O4 camera.
Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible…
See Zip file for all files including STL & STEP. ---Citations: Inspired by the Recovery Tactical MG9 Angled Mag Pouch. ---Description: Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous. ---Variants: A:…
After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…
Designed for the Apache 1800 case, for one NVX® NSP46 4" x 6" driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 6 m4 heat set inserts, and is mounted with 6 m4x8mm screws. The jig has…
The mouse needed a name, so it is now called the Lil Magnum! Because it is small! Be sure to check out the tips on successfully printing a good, light Li'l Magnum ! This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse…
TLDR - This is a universal version of upper and lower brackets which work with all recent AMS 1 / 2 Pro. For 3 or 4 AMS units, see this model . My AMS which was received in an X1 combo did not match any of the versions from…
Workings but this is a viable model: Aim to create a quick print flat moss pole that folds and snaps together as a version of my other more complex upright Voronoi model. By printing flat on the build plate the print time can be greatly…
Why? I needed space under the stairs :-) Features: Stable wall mount to grab the rear inferior wishbones Rc cars suspension locks the car in place and garantees a firm hold to the wall Requirements: I printed the mount with a 0,6 nozzle,…
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
Print Settings Printer brand: Kingroon Printer: Kingroon KP3S Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament material: TPU Filament brand: Kingroon
This is obviously inspired by Optimum Tech's Zeromouse and Zeromouse Blade, but using FDM and a more affordable donor mouse. The thumb and finger rests are in a reasonable spot for me, and the buttons are lined up well. The shell requires…
I modeled this after a right caster block that I had laying around. All holes are within 0.5mm of the actual part. I've installed this in my Rustler and it fits perfectly Here is a link to the product page for the real part:…
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
Adapter is modular, so it's easy to adjust separate parts, or print it in different colors. No glue or supports needed. PrusaSlicer warns about print stability issues. Reason is two small parts of perimeter of the duct module, just before…
STL file of the legendary Sony VX1000 loved by all skaters.
use the same conector thats on the tbs mambo sma kit power leads should feed trough the top
у моего друга сломалась пластиковая дуга, смоделил как смог, поменяли, работает
This is a component set for the VXE VGN Dragonfly R1 ( NOT SE, Pro, Pro Max). The main purpose is to provide tools for making 3D printed mice using these internals. I've provided the STEP and F3D. The Fusion file is reasonably-well…
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
Extremely short handguard for airsoft ar15. AEG 31.8x1.5mm threads , screw in directly. Use spacer to fit your barrel and time handguard correctly. For example, One loop is 1.5mm, if you need to time 45degrees. 1,5mm*45/360=0,1875mm, in…
I designed this battery case to fit the Yaesu VX8DR ham radio. It also fits the FT1dr, FT2dr, FT3dr, and FT-5dr. It takes 18650 Li-ion cells. I will link to some of the parts I used below. This is designed to use unprotected cells. The…
Inspired by the Traxxas CLIPLESS BODY MOUNTING on the Rustler VXL, I've made this one for the e-revo VXL 1/16. I used two screws M3x0.5 6mm (recycled on a old revo 3.3, sold with this part TRX5228) Works perfectly
A mini controller for games such as Sound Voltex, USC, KShoot, osu 4k, etc. Based off of mon's Pocket Voltex and Cammy's pocketvtx! Basically everything you need to know is actually on GitHub: https://github.com/speedypotato/Pocket-SDVX…
FlyFishRC Volador 2 VX5 - dual antenna holder (Waksnail Moonlight Kit)
Vesa adapter for Asus VX27 monitor. Print with higher Infill (~40% for PLA) and/or PETG.
Just modelled these to help protect my VX3.5 motors since I often times would crash in a way that would bend the bell on motor. I have not yet fully tested this designs performance in the air so please keep that in mind. You will need a…
This is a replacement drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Item #W3PVS20JST Gear, Drive, Small (2 pk) - PVXH008PK2 PART # PVXH008PK2 ALTERNATE PART #'S 87-150-1830…
this baseplate is modeled to look like a Pmag GL9 base plate. this is not 100% the same but it give it the look and feel of one. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Pmag GL9” just like with the…
When I purchased the AVX scope I was unable to get a crosshair to suit, so I made one. I've shot it extensively and it's held up OK. Printed with eSun PLA+ I chose orange as it was the best colour for contrast against the field and…
Holden fuel cap lid repair VT VX Works well
This is a model I made for my Suzuki VX800 motorcycle. The original has to tabs that hold it onto the petcock itself with a screw to secure it in place. The tabs broke off, and an OEM replacement, if you can find one, is to expensive. I…
Compact antenna and GPS mount for Volador VX3.5. The VTX antenna mount requires trimming down the plastic antenna tube to fit. Sized to fit the antennas from a dual antenna Walksnail VTX, but will also fit DJI O4 Pro antennas. Supports…
Print with support for the Electrolux recess. OsVac neo M32 has tight tolerances around the notches and might require sanding. In case of elephants foot, smooth out the inner edges of the Electrolux compatible part. Thanks to TOKENIZER…
I bought a used VX-7R and the rubber DC charging port cover was in dire need of replacement and I couldn't find any for sale. Like the original, my design relies on the OEM washer and screw to fasten to the radio. Print this gasket in TPU…
This is a GoPro mount for the Rustler 4WD VXL - it might fit others but I've none to test with. It is intended to replace the roof bars, which are held on by four screws from inside the body. I experimented with a few designs, but settled…
A mount for the Radiomaster RP1 ELRS receiver for the Volador VX3.5 FPV drone. Fits on the underside or upperside of the frame. Hole diameter is 20mm. I used 6mm M2 screws for mounting, the 5mm M2 screws which came with the frame kit…
This is the replacement for out-of-the box velcro strips on Syride NavXL vario for easy mounting the vario to the harness or wing risers Print instructions ASA 0.6mm nozzle, 0.2 layer height 3 perimeters 100% infill Additional hardware 2x…
This is a mount for the Foxeer m10Q 180 for the FlyFishRC Volador VX5, that includes provision for an SMA mount and a USBC connector that can be wired for Walksnail Avatar
Just a Label Print for your car modding to apply anywhere. Print it with : PETG/PAL 10% Infill 0,2 Layer Height. Use Cura to scale it to your wanted Size.
These are battery straps for Traxxas 4x4 VXL Trucks. They MAY work on the non-VXL trucks as well, but I don't have one to try it out. There are four different files. Two are for the "First Gen" chassis with the short battery compartment.…
Front GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. This GPS holder, made for 25 x 25 mm modules such as the Team Blacksheep M10Q, which also includes a magnetometer, uses the same hole pattern as the…
Aft GPS holder for the Volador II VX5 O3 FPV Freestyle T700 Frame by FlyFishRC. It mimics the concept of the default 3D-printed GPS holder included with the frame, but enlarged for a 25 x 25 mm GPS module, such as the Team Blacksheep…
3D-printable bracket to perform a conversion on a SDVX Nemsys cab, designed for 15.6 touchscreens that have 2 holes in the back that are 75mm apart (like most touchscreens on amazon). One that has been confirmed that it works (by myself)…
A VX6 Throw lever I made. The new VX6 HD's come with a throw lever but anyone stuck with a first gen is also stuck paying over $100 for a throw lever. Both iterations worked great. I prefer the V4 for use but the large lever irritates me…
Flyfish Volador VD5/VX5 O3 and GPS Mount Features: Designed for Flyfish Volador VD5 and VX5 All-in-one mount for the DJI O3 stock antenna and a micro GPS With and without the Omni Protection Print Settings Printer: Creality Ender 3…
Adapter to put a BOSCH A 332 H flatblade wiper on my OPEL ASTRA J OPC. Prusament PC Carbon (fits best in color) / PC / PETG / ASA needs only a small support structure under the connection part to the arm.
Hey team, I've put together an objective and ocular ‘flip up style' lens cover to suit the Leupold VX-5HD. Leupold themselves make absolutely stunning lens covers ( example ), which are beautifully machined out of aluminium and fit their…
Steps Disassemble like this: Remove the switch and separate the transparent light cap Remove the blue front light cap with some alcohol Print the new switch Orientation as shown in the picture Layer 0.15mm Support YES Top/Buttom Layers 5…
This is a remix of @2vid's VX4 Pro remote case, intended to be printed out of rigid material (PETG, ASA, ABS, PLA etc.). There are two halves and are joined using (3) screws. The screws I designed it for are from McMaster-Carr and are…
Designed this for a friend to adapt his monitors (Viewsonic vx3258-2kc-mhd) to a VESA mount, this is 100x100 spacing. I printed them out of carbon fiber polycarbonate. You'll need M4 screws (maybe about 20mm?) and 4 M4 lock nuts to attach…
This is a replacement LARGE drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Gear, Drive, Large - PVXH007 This is #7 on this diagram…
This adds the missing OpenLOCK VxE floor tile which unfortunately is not (yet) included in @devonjones great https://www.thingiverse.com/thing:3711334 collection. Note: this one is not perfect, since I could not find any good template and…
3D scan of a land rover defender SVX 60th anniversary front light plastics
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
Remixed from https://www.thingiverse.com/thing:4834804. Fixed the center hole on the spacer at 20.5mm for a tight fit on Celestron AVX & CGEM & ZWO AM5 mounts. Print Settings Printer brand: Prusa Printer: Mini Rafts: No Supports: build…
For the Flyfish Volador VX3 / VX3.5 Single antenna mount lollipop style I have added a mount to hold a GPS unit on the rear, This is for an 18x18 GPS unit ( Im using the TBS m10 unit) Printed in TPU 0.2 layer 15%, I have attached the 3MF…
Will fit the original button and will replace the transparent piece. Note: can be printed in any color transparent is not required. Printed with PETG 0.2, to have a bit of flex.
You have to use resin printer to get the accuracy.
Fixed - Correct file has been uploaded. 08/19/2023 This is a replacement drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Turbine Hub with (6) Vanes - PVXH038SA This is #2 on…
Prints very simply. Design includes spacing for a thin adhesive felt/flocking tape, like this one (non-affiliate link). 3MF file includes designs for 714mm & 528mm focal length Bahtinov patterns, make sure you're printing the desired…
original design is by FabianP on Cults 3D
This is a replacement steerin drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Steering Bracket Roller - PVXH011SA This is #12 on this diagram…
The small model is lighter but provides less protection, no TPU in view. The large model is heavier but provides more protection, slight TPU in view. Print laying flat on the side, infill density is up to you and your weight requirements.…
KRUPS GVX2 replacement bevel gear Recently my coarseness selector knob (or as KRUPS refers to it, the “ground coffee finesse selector” on the side of the grinder would no longer rotate. I disassembled the grinder to find that several…
Wire holder for Celestron AVX mount. 2 Wall 15% Infill .24 Layer Height .20 First Layer Height Printed on Bambu X1C in PLA.
I really liked how this wing looked. I printed their mount but either it doesn't work on the 2016(ish) Rustler VXL, it required cutting the body, or the metal shock tower I have is different. I made a new mount that is much longer. There…
This part is printed in tpu and replaces the standard aluminum mount that comes with the frame. It provides more protection for longer camera's such as WS moonlight by mounting the camera further back in the frame. Note: If you have a…
This clamp helps you mount your Rode VXLR+ 3.5 mm TRS to XLR Adaptor to a camera cage or other parts of your rig. It can be mounted using one or two ¼ inch cage screws (although you prevent twisting by using two). Unfortunately, there…
(08-09-2024) APS ACP base plate added GHK g 1 7 base plate added -- this baseplate is modeled to look like a DMB base plate. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Danny meatball G mag” just like with…
Simple design of an aileron for a Traxxas E-Revo VXL 1/16. Option for adding FPV Gear. Printed 2 of these in PLA to have a spare in case of hard hit. Haven't broken the first one yet and im testing hard. ;) I use this VTX -…
This is just a remix of an already existing belt clip for a VX-6R, I made the changes so that it fits on the molly/pals webbing better and so it fits in my stand.
A remix to scale and mirror the arm down by 60% to fit the 1/16 version of the E-revo. It is about 1,5 mm longer than the original one. If you scale the arm to the same size as the original, the bushings does´nt fit. Print Settings…
adjustable 04 pro camera, dual antenna mount, and top GPS mount made with TPU
I've seen plenty of front LED mounts for the Traxxas Rustler 4x4 VXL, so many. But get this… this one is for THE REAR Which is surprising given the many mounting points one could use. That said, this is held on by a single M3x25 cap head…
See pdf for instructions. Just added a hole sleeve bushing .stp file to prevent chafing of the wood shelf holes instead of oversized T-nuts. If I do again: Heated threaded brass inserts in lieu of threaded “cold” inserts (what the…
This is a replacement part for Hayward PVXH011SA. Would recommend using ASA or ABS, and since this is a tall and skinny print, would recommend printing with a brim as well as printing slowly especially as the top part is printing things…
For a sleeker, more streamlined appearance, you can remove the rear wing of the 1/16 Traxxas Mini E-Revo while still maintaining the rear bumper in its original position. My custom mount eliminates all unnecessary mounting points for the…
This is a replacement Vane for the turbine drive for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Turbine, 6-Vane Kit - PVXH038SA This is #2 on this diagram (Vane ONLY)…
Náhradní knoflík pro Yaesu VX3 slisováno po vytištění. Materiál Pet-G
Rubber mount for FPV Camera (HDZero & Runcam) for FlyFish Volador VX5/VX3.5. I constructed this based on my measurements with a broken caliper. Still didn't print it and test fit it.
This is a 1,5 degree jet pump wedge meant to be installed between the pump housing and the nozzle of the Yamaha VX1100 in order to trim the front of the waverunner up a bit out of the water. It fits the pump very well but it must be…
Beschreibung in deutscher Sprache weiter unten: This adapter allows easy and quick mounting of a Seestar S50 telescope on your stable Celestron telescope stand without having to make a change at the Seestar or your Celestron tripod. In…
remixed from: https://www.thingiverse.com/thing:6523720 and https://www.thingiverse.com/thing:6928153
This is a quick and frame to cover the gaps left around the tombstone with modern headunits. print it with supports and in PETG/ABS, mine is in PETG and is still there after one of the hottest summer in history. Keep in mind that mine is…
his is a replacement drive gear for the Hayward The PoolCleaner 2 Wheel Suction Cleaner. This may also fit the 4 wheel version also. Updated on 06/04/23 Gear, Drive, Small (2 pk) - PVXH008PK2 PART # PVXWLC1900WH ALTERNATE PART #'S…
Traxxas VXL-3s ESC adapter to Rustler with mechanical ESC. I have a few old Traxxas trucks laying around with the mechanical speed controllers. I wanted to update these to the VXL-3s system. I do not like using double-sided tape and the…
Decided to make a mod to convert vxe r1s to finalmouse ulx medium. No idea how accurate shape as I dont have any finalmouse (expensive af) but feels pretty similar to my Beast X 4k. Made based on a 3d scan. The clicks and scroll all work,…
After trying to buy a replacement spreader/center tray from Celestron and failing, I modeled a replacement and printed one to see how it worked. Perhaps I went overboard on everything (8 walls, 8 top/bottom shells, 60% gyroid infill,…
I love my Yaesu VX-8DR. It has been discontinued for many years now. Last I checked, replacement parts are hard to find. The screw that holds the dust cover over the headphone and DC ports on mine broke off. While the dust cover does…
I'm working on designing a bracket to mount the VXL 3S motor onto the 1/16 E-Revo VXL, and it's required me to model some of the parts to use as references in the design process. I'm posting the model so that anyone can use it as a…
THIS MODEL IS STILL UNDER PRODUCTION AND MAY HAVE ISSUES. I WILL POST NEW VERSIONS! ALSO, THE IMAGES OF THE MOUNTS ARE THE ORIGINAL INJECTION-MOLDED MOUNTS THAT CAME WITH THE MIC, NOT MINE. You need to unscrew the old mount from the shoe…
This should be printed in something decently strong (I used Inland PLA+) because they will need to be able to flex a little bit for the latching. Print with supports. If you enjoy my stuff and feel like showing your support in a financial…
Window is designed to fit the original display cover taken from a Cyborg RX grip. If the original display cover is not available use the "disply cover" STL as template for a DIY cover.
Circular support base for ASUS VX239 display monitor (or your display if it fits) It is printed upside down without supports. Designed in Freecad, sources included.
