Counting matching models…
WordClock 16x16 - 2024 This is the 2024 variant to the WordClock 16x16 model adding new functions and features as well as a new font as V2 variant. =) This WordClock 2024 variant covers mostly every input I got from users in the last 2…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
Remix of the Design Moon Lamp by Frank Deschner to be able to print it better on the Prusa Core One with additional settings: Organic supports activated in the top moon parts to avoid holes in the top surface Fuzzy skin on the holder…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
WordClock using LED stripes with English and German layout with lots of functions and web interface. UPDATE 19.04.2025: There is a new modern variant available now, which has many more improvements and does not need any soldering to build…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
M3 screw sorter for M3 screws from 8mm to 40mm. As much as I liked the idea of the actual featured model of the M3 sorter it was not working good enough for my bolts , because many sizes which I use were missing and the used angle did not…
Sovol SV08 first layer test 350x350mm using the complete print bed and a single 0.2mm layer. With that you can really see if your 1st layer is OK. =) IMPORTANT NOTE: You will need to remove the silicon brush (blue arrow) in the upper…
MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…
Simple to print Window Opener / Window Stopper to keep your windows open by putting it into the angle between the frame and the window sash: Works super quick and secure for windows and e.g. balcony doors as shown here: The groves in the…
WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…
Gridfinity base + boxes for aidB Eurobox NextGen Economy 400x300x120mm and 400x300x75mm which will add 2 or 1 layers of 52mm high boxes into the Eurobox. Features: Custom base plate in 4 parts which will fit into the Eurobox with a gap of…
Radius gauges 1-35mm with holder. NOTE: Added 2 more gauges for 36+37mm to fill up the holder… (optional) The imperial variant can be found here: Radius gauges 1/32" to 2" with holder Printing instructions: 0.2 speed profile No supports…
BIG birthday numbers to be placed on a table. Height = 175mm Depth = 55mm Printing instructions: Fuzzy skin activated for “all walls” in Prusa Slicer 0.3 draft profile Textured sheet used No brim No supports No ironing of the upper parts…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
Simple Apple MagSafe + Apple Watch wall mount case for 3 countersunk screws. Large enough for an iPhone 14 Pro MAX. Note: Check out this new model too: Charging butler / iPhone + Watch + AirPods Pro wall mount charger Mounting the parts:…
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
Sovol SV08 - PTFE tube connector to be screwed to the stock filament sensor. With this connector you can attach the tube of you dry box directly to the filament sensor. You will need 2 longer (M3x24) countersunk screws to attach the part…
EMO robot shoe #1 with a sneaker look. EMO seems to like them and seems to walk more silent now. The fall prevention sensors holes on the bottom of the feet are open and charging works too. Printing instructions: 0.3 draft profile used…
Silent fan & AirFlow mod for Sovol SV08 Out of the box the Sovol SV08 prints not that bad… But… Well… It is difficult… To be honest: It does not come even close to my Prusa MK3.5 machines regarding print quality, handling, hardware and…
Sovol SV08 HDMI screen holder (remix) The original part seemed a bit too wobbly to have. When the printer worked a bit the screen began to shake a lot because of the gap in the part. So i removed that gap and made it stiffer therefore. =)…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Sovol SV08 filament roll holder The stock Sovol SV08 filament roll holder rolls the filament roll way too smooth so that I got 2 filament tangles already on the first prints… So I made this new one to solve the problem. It can be simply…
PixelClock 32x8 NeoPixel LED matrix to be placed on a desk or on your wall. For BIG printers as 1 piece front and small printers in 2 front parts too! =) This project can be assembled without soldering. More on this below… Video: Music…
XMAS neon LED star. Very easy build and print. Parts used: 12V/2A power supply 70cm of an 12V WS2811 neon LED strip 5m (6mm width, 10mm height) 1x Wemos D1 Mini ESP8266 1x On/Off switch Ø13x19mm 1x Barrel jack for power input Ø12mm Some…
7 segment LED clock. Simple to print and to setup. Functions: RGB LED clock with web configuration page. The time and date value can be displayed in different colors. The colours and intensity can be controlled with the internal web page.…
Sovol SV08 - Nylon gantry cable mod Usually the gantry wires often get in the way, especially on higher prints as shown in the video and sometimes they seem to get even caught by the gantry… So not ideal if you don't want to babysit this…
Simple Prusa MK3S/MK3S+ display cover. For those who use a seperate display to control the printer or simply do not want to see the blue display all night lighting up the room. The cover tightly fits right into the display holder and…
Small seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 5 trays with the size of 45x45x10mm. The trays fit tight with a 0.3mm gap into the tray holder. The fan…
EMO robot shoe #2 with a sneaker look. EMO seems to like them and seems to walk more silent now. The fall prevention sensors holes on the bottom of the feet are open and charging works too. Printing instructions: 0.3 draft profile used…
Impossible Vortex Screw Cube I needed to try one of these too. =) Printing instructions: 0.2 speed profile No brim No supports Textured sheet used Happy printing =)
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
Philips / Saeco LatteGo milk container tip-over protection holder. I am using a Philips Series 5400 fully automatic coffee machine since a few weeks and i like it a lot. Especially cleaning the parts is 10x faster and easier done than on…
Apple iPhone MagSafe stand (for ≥ iOS 17 standby mode). Fits up to iPhone 14 Pro MAX as shown here. The MagSafe charger cable is routed through the holder and foot part to hide it. Underneath the foot some little markers are placed in the…
WordCalendar 16x16 - 2024 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…
Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…
19" rack holder with 2 drawers with 1U in height. Parts needed: 2x M4x25 screw + M4 nut 4 mounting screws fitting to you 19" rack Print instructions: Print front parts standing Print the 2 drawers on their bottom Small amount of supports…
BIG news on 18.07.2026: Software version V2.0.0 available! WordClock 14x14 Classic received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of…
EMO robot walking pad with black brim as border to avoid our EMO robot from falling off from most of our tables with too round edges. When he walks from the white pad onto the black brim, he will step back. In addition the brim is 5mm in…
Charging butler / Apple iPhone, Watch, AirPods Pro wall mount charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to have 1 visible cable on the wall only for a cleaner look... When charging these 3…
Raspberry Pi 5 holder A few weeks ago I have updated my Magic Mirror central smart home display from an Raspberry Pi 4 to an Raspberry Pi 5 and needed a new holder to mount it to, because the new RP5 uses an M.2 NVMe SSD drive now and…
EMO robot skateboard Let's be honest… EMO needs another skateboard he can ride on! =) I am pretty sure: When I don't look at him he is practicing some new tricks… ;-) EMO will hold (a little bit) on to the board with 2x neodym magnets…
iPad holder for up to 3 iPad Pro or the smaller types of the iPad lineup. The 3 sections are 20mm wide so you might be able to fit in thin laptops too. An f.e. LG Gram 17” laptop does fit too. Printing instructions: 0.3 draft profile 4…
Simple banana plug socket wall mount case in 2 variants for a small speaker project: SingleBanana version: Holds 2 banana plug sockets MultiBanana version: Holds 4 banana plug sockets Printing instructions: 0.2 speed profile Supports set…
For a little project with use of an Arduino UNO with Ethernet shield I needed a small but strong case which should be fixed with a Ø31mm magnet. Because I could not find an Arduino UNO case which also can hold the Ethernet shield I…
Simple to print and use Allen-Key-T-Handle that shows the numbers of the corresponding slots and acts as an Allen key holder when you not use the handle. Allen keys theses sizes will fit: 2 2.5 3 4 5 6 Printing instructions: 0.2 speed…
Simple and fast to print XBox Series X headset holder. With this holder you can hang your headset on one side of the XBox Series X. Just stick it in the middle 4 holes on one side of the XBox Series X you want to place the holder to and…
I am using a lot of these electronic wire spools for my projects. They are good in use but not so good to store when you not use them, because they are not good to stack and create a mess all the time... Therefore i made this little wire…
XMAS neon LED tree with star. Very easy print and build. Video: Parts used: 12V/2A power supply 173cm of an 12V WS2811 neon LED strip 5m (6mm width, 10mm height) 1x Wemos D1 Mini ESP8266 1x On/Off switch Ø13x19mm 1x Barrel jack for power…
Gridfinity 4x4 transportbox with sliding magnetic lid with your text on it. Functions: Holds up to 16 Gridfinity 1x1x6 boxes or mixed sizes up to 4x4x6 to transport them. The sliding lid closes 0.5mm above the boxes so noting should fall…
Remix of the display cover protector of Džino with text on it. You can change the text within Prusa Slicer. Here is a good article how to do so. Printing instructions: 0.2 speed profile No brim No supports Textured sheet used Happy…
WordCalendar 16x16 - 2025 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…
Bottle Opener - keeps bottle cap flat History of this bottle opener: About 40 years ago my dad created and afaik invented the in the pictures shown bottle opener made out of wood. He made really many of them manually on his lathe - afaik…
Banana Banana Holder Printing instructions: Supports needed from the print bed for the base part (upside down printed) Using a brim could help if you face problems with adhesion. 0.2 speed profile Textured sheet recommend: If you use a…
Music reactive matrix LED cube. Very easy print and electronics installation. Functions: 9 music reactive vu-meters and 3 non-music reactive animations Currently 1 vu-meter with user selectable color Web interface to change settings,…
School Timetable with ePaper display. Super easy setup. No soldering, no coding required. =) Functions Very easy to print and to setup device. Just plug all parts together and it is useable. =) WaveShare ESP32 powered 7.5” ePaper display…
Date Reminder with changable sign Simple date reminder with rolling number rings to remind you about the next important date. I use some of these for important appointments and for the next upcoming birthday… The model is split in several…
Tree of life with magnetic birthday numbers from 0-9 to fit your needs. Base with German and English “Happy Birthday“ text included. The numbers are sticked together into the tree with neodym magnets with Ø6mm with 3mm thickness. Per…
Analog LED ring clock with 60 NeoPixel RGB LEDs Features: This LED ring clock uses a 60 digit RGB NeoPixel LED ring split into 4 quarters The time is shown in an analog way as you can see in the pictures The code for the used ESP8266 D1…
Simple 64x64 matrix holder with integrated open case for an ESP32 with some holes for wiring, cable ties and 3 wall hanger holes for nails or screws. Printing instructions: 0.3 draft profile No brim or supports used Steel Sheet used Happy…
Apple Keyboard with number block and TouchID + TrackPad holder to keep the 2 devices together as one. Should fit the current devices well. =) The 2 parts are screwed together with the M3 screws and the connector plate. Super simple print!…
A colleague had some spare 120mm RGB LED pc fans lying around and he asked me if i could create a holder for them to be used as a ventilator. He wanted to be able to control the fan speed and the LED color as well. What began as a quick 1…
Music reactive LED helmet - non wearable version I really like the german band DEICHKIND which I listen to since the late 1990s. Their shows are legendary epic as f**k. I have not seen any better show yet. (Props for the message at minute…
Philips OneBlade 1-piece razor (lazy) case / The lazy case to store the razor in 1 piece 😁 I found some cases here to hold my OneBlade, but they were not fitting to my OneBlade (QP2824/31) set fully. While thinking about such a case I…
Wedding desk decoration with 2 big rings with free customizable text on the inside with Prusa Slicer (≥2.6). As shown in the pictures, the .3MF file already has 2 names and a date stored in it that you can customize with Prusa Slicer…
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes Dual display version of my “ WaveShare 4.2“ e-Paper case - symmetrical and without holes ” display case as desktop variant. It can hold up to 2 ESP32 controllers and…
ePaper display name tag with a 2.9" eInk display in offline mode held by 4 strong magnets to your clothing This case for a WaveShare 2.9" ePaper display comes with a small code to set 2 lines of text to it. With this code it can be used…
Apple TV iPhone FaceTime MagSafe charger holder for iPhone 12 to 14 up to Pro MAX models. Fits up to iPhone 14 Pro MAX as shown here. Beginning with iOS 17 Apple will support FaceTime calls with Apple TV like shown here . I directly saw a…
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Medium sized seed dryer I made for a friend who grows a lot of chilis with super tiny seeds with about 1mm in diameter. Features: It contains 3 trays with the size of 85x85x15mm. The trays fit tight with a 0.25mm gap into the tray holder.…
I really like the design on the new Prusa USS Drybox filament storage boxes and directly ordered 10+ of them for my Prusa Core One and Prusa XL printers. I also like the idea with the small notches in the round middle part in the USS dry…
15-Segment clock using a 16x16 LED matrix. These numbers should look way nicer because of the round corners added to them and all numbers will have the same height which is imho always a design problem in the well known 7-segment display…
Simple to print pencil box with your own name or text on sliding magnet lid. =) Functions: Add your own names or text on the lid in your slicer. See instructions below. No CAD tool needed! The lid is held in place by 4 magnets with Ø6mm x…
XMAS neon LED tree. Very easy print and build. Video: Parts used: 12V/2A power supply 103cm of an 12V WS2811 neon LED strip 5m (6mm width, 10mm height) 1x Wemos D1 Mini ESP8266 1x On/Off switch Ø13x19mm 1x Barrel jack for power input…
New base with electronics housing + post for 200mm PC Fan Desktop Fan by Hijinx. The base allows to add a DC jack and a power switch to make this cool fan even better to use. Notes: You will need some tools and parts to connect the…
Binary Matrix Clock: “There are only 10 kind of people. Those who understand binary and those who don't…” ;-) Functions: Binary clock using a 16x16 LED matrix to get the amount of wiring to an absolute minimum. Shows the numbers on the…
20x20 aluminium profile HC-SR04 Ultrasonic Distance Sensor holder. Printing instructions: 0.2 speed profile. Supports active from the print bed. Happy printing =)
Simple pencil holder with texture. Super easy to print. Printing instructions: No supports No brim Happy printing =)
I still like my old IKEA “Jerker“ writing desk with its rails and extra boards to put things on. But as always you never can have enough storage. Yes the desk is not the nicest, but I could not find a better one that can keep so many…
HomeKit controllable LED light #1. Really simple to print and to setup. =) This lamp can be directly added to Apple HomeKit and controlled then via Siri and the Apple HomeKit app too. You do not need an additional bridge so it will be…
Super simple to print and use Logitech C920 (HD PRO) webcam blocker that will sit on top of your camera and will block the camera for your privacy. =) Just print the part laying on the logo and you will not need any support or brim.…
Super easy and quick print as Sovol SV08 privacy camera mod. I had high or at least some hopes, that adding the original Sovol SV08 enclosure would add better privacy and security to the webcam usage of the printer… Well… see picture…
Matrix 32x32 for 4 pieces of 32x8 NeoPixel LED matrices giving you 1024 single controllable LEDs for lots of projects. =) The project can be created completely solder free with the use of some WAGO clamps. You will need a large printer…
Weather station 16x16 matrix showing the current time, date and weather as a permanently scrolling text. Functions: Shows time + date + weather for your location as a permanently scrolling text. The weather data is updated every 5…
This BIG sweets container as LEGO head can hold up to about 0.8kg of these super delicious Swiss chocolate balls or other sweets or things you want to store in it. =) The head part without the lid is 15cm high and has a diameter of 15cm…
Aqara Smart Lock U200 - Door Mounting Adapter incl. .STEP file to adjust to your door. =) Video: Notes: Please let me know if you have additional ideas for this. I thought of rounding the top edges too a bit to look nicer… Also adding a…
Stanley sorting box inlays for small parts in different sizes. I use a lot of these Stanley sorting boxes . For most parts they work quiet good and their dividers often work well, but not for small and thin parts, like washers… They…
Trophy remix from Agustin Arroyo incl. new, fixed base with your own custom text to be added in Prusa Slicer. The base and trophy come in 1 part, so no glue or mounting needed. Add your own text on the base in your slicer. See…
Seed sorter with 5 funnels where you can attach little plastic bags to store the sorted seeds in. A friend of me grows a lot o chilis and he asked me to create this sorter. The plastic bags should be held with little rubber rings. The…
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
ECOVACS DEEBOT (X1 e OMNI) cleaning pads holder to store the mopping pads when you do not want to use them. You can simply slide the pads onto the hexagon posts and if you want to secure them even more in place you can add two 6x3mm…
ePaper display knob with a 2.9" eInk display in offline mode → no power needed. This knob-case for a WaveShare 2.9" ePaper display comes with a small code to set 2 lines of text to it. With this code it can be used in offline mode as…
Sovol SV08 build plate holder for 2x 355x355mm build plates. Print settings: 0.2 speed profile Brim active No Supports Print in 45° angle as shown below: Happy printing =)
7-segment time + date + weather display. Functions: Shows time + date + weather (temperature and humidity) for your location. You can choose in the settings if you want to have the temperature as Celsius or Fahrenheit value. All settings…
Case for the Withings BPM Connect blood pressure meter with sliding lid. The lid locks in place with a small lip. There is also a lid part without the logo added in case you want to use the box for other cases: The inside is roughly…
Tangle free 64 AA battery dispenser. On my way to another (bigger) project about battery management, I thought you might like this battery holder or dispenser which stacks the batteries tangle free, which most holders I tried so far…
Present box for WordClock & WordCalendar 2024/2025 models. This model was kindly provided to me by the user @Pierre . I think he is a big fan of my WordClock 2024 and WordCalendar 2024 models and asked me to share it with you too. =) The…
Monk mod: Monitor interconnector to keep your displays leveled to each other adding additional options like a shelf or other add ons too… Background to this model: I still really like my 2 LG UHD 27” monitors . Together with this dual…
I use a lot of these very sharp 80mm knives in my kitchen and you need a lot of attention if you want to get them out of the drawer… So I made this little 80x70x16.5mm knife separator for up to 6 knifes to put into the drawer that will…
