120 models
The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm – this should handle most tubes. Usage To assemble: Pass the toothpaste tube through the frame slot…
Design I found many knob designs, but none that were very flexible. I looked at the comments and suggestions of several of them and decided to create a customizable design that should satisfy just about everybody. Using the Customizer The…
UPDATE : If you want different sizes and locations of your cells try my Print-In-Place Box 2.0 remix. Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number…
This design is meant to hang 2 USB cables at the edge of my desk top. I originally designed this about 3 years ago. I decided to update it and make some changes for publishing. The original design was printed upright to allow clean screw…
This is a seam guide I made for my wife. She has a Brother QC-1000 but it should work for others. It uses four 8x3 magnets, glued in. It has a shallow notch cut out to clear the plate screw. There is a hook on the end to help keep it…
I made this about 5 years ago of a model on Thingiverse . I've waited for the designer to import it here, but that hasn't happened. I think it is a very good design that needs to be shared here.
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Update This design is superseded by the Version 2 remix . ----------------------------------------------------------- With this OpenSCAD generator you can create a custom box to store your magnets. To use it, simply set the magnet…
I made this pillbox ( https://www.thingiverse.com/thing:2500113 ) for my wife 5 years ago. It has worked OK. It is an annoyance to unscrew it to remove the lid for refilling, and get the screw tension just right so the lid will rotate…
Update This design has been superseded by a newer version, Pill Puncher 2 Generator . Description I have seen several of these pill pusher/punchers for blister packs, but all upload only one size that is almost guaranteed to not fit your…
Use this OpenSCAD generator to make custom tags for your cables. You can customize just about everything: The length, width, and height of the tag The font – name, size, and style The diameter, width, and thickness of the clip Just…
Update Use this remix for the larger 237 fl. oz. jugs. _______________________________________________________ I found this design about 3 years ago on Thingiverse by davwilso. https://www.thingiverse.com/thing:2748680 I liked the idea…
Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number of rows and columns for the cells Set the height of the inside of the cells Set the height and…
This clip was inspired by " Spring Clip Stronger " by Blake Haas. Although it has several improvements: It prints easily with no support It snaps together without glue Positively locks together (won't come undone during use) Can be…
Use this tool to insert and remove a sewing machine needle. Features Holds a needle aligned for insertion Allows you to raise the needle to fully seated position Works with all universal domestic standardized needles Works with all sizes…
My wife found this bag holder online some years ago. Its features were: clips at the end to hold the bag; extendable arms for different size bags; foldable arms for storage; suction cup to hold it in place. Well... it actually didn't do…
After reviewing a few comments, it became clear to me that the new jugs not only had a larger diameter screw-on, but the cup was larger too. My wife likes to use the original small cup and I am guilty of not thoroughly investigating the…
My wife asked me to make a replacement for her floss bobbins. There does not seem to be any source for the original DMC bobbin. I re-created it by eyeball in Fusion 360. It is a quick, easy print in any material.
I really like this tool! And I felt it could do so much more. I worked out the parameters to use it as a bottle opener. So far, I have tested it on Propel and Aquafina; but I'm sure it will work on many more brands. Here's the size…
My wife wanted this to fit US soda bottle. I modified the Fusion 360 source (thank you for publishing!). I had to change the thread pattern – had to print several tests to get it correct. This new thread pitch and diameter is for US soda…
This is a simple Fusion 360 design for a wire rack hook. This is for a (standard?) rack with upper and lower rods that measure 5.15mm and are 28mm (outside-to-outside) apart.
Filament Hinge Tutorial Overview Hinge pins can be of many materials: metal rod, wooden rod, bolt & nut, or a piece of filament. The filament hinge is sturdy, costs nothing, and is fairly easy to construct. I have used this method with…
I like this design. I wanted one for my garbage disposal side, but the dimensions were not right. I didn't want to scale it, so I created a Fusion 360 design using the eyeball method. The design (included) is set for 85mm diameter and…
I designed this clamp to mount my Yarn Counter Stand , but it may also be used as a general purpose clamp. It is completely parametric (change the variable values in the included Fusion 360 file). I’ve included an STL with a thin top to…
I designed this box to hold my wife's crochet hook set. It is meant to fit the Eleggant Hooks set. It holds the somewhat bulky egg shaped handle, the hooks, and the little box of O-rings. I also added a place to hold her notes. (My wife…
I made this about 5 years ago of a model on Thingiverse . I've waited for the designer to import it here, but that hasn't happened. I think it is a very good design that needs to be shared here.
My wife crochets and knits. She has a lot of needles and hooks. When I first started 3D printing, I wanted things to design and make. So, I designed this about 4 years ago as my first box project. It uses filament for a hinge - which has…
I researched several board mounts, but wasn't completely satisfied with them. So I designed my own with Fusion 360. It expects a self-stick 830 point breadboard. I have used this with Uno, Mega, Elegoo R3 (Uno clone), and Adafruit Metro…
I designed this a couple of years ago because I could not find any holders for my preferred square bottom tacos.
This is a significant revision of my Pill Puncher Generator . It adds an option to create an additional piece hinged to the original. That makes a top arm with the puncher, a middle arm with a hole for the blister, and a bottom arm with a…
The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…
My wife has 2 styles of commercial tuna can drainers. But when the can company went to pull tab lids, the commercial models quit working as the diameter of the new lid was slightly smaller. I took some measurements and studied the…
I like my bed sheet to stay neatly attached to the bed. I use an old style, large garter hook attached to a piece of elastic on each end of a strap that runs under the mattress. When I needed another set, I discovered that my 50 year old…
While you are using a tube of Super Glue, you sometimes need to set the tube down (while the cap is still removed). I got tired of finding places to lean the tub (because laying it down, it will leak). So I designed this little stand to…
This is a wrench I designed to fit a 66mm diameter jar lid. I made it in ABS with 4 perimeters for strength.
Features Easy, moderately quick print Quick one-turn screw on/off lid for easy filling. Lid rotates a small amount to open and close the dispenser hole. Knurled edges for easy grip. Assembly Assembly is very easy – just snap the top onto…
This is a container to hold a set of 10 mini needle files. My files measured about 3.3mm x 100mm. I made the Inner Wall Thickness a little bigger to spread out the holes and allow room for the file widths. For the complete parameters of…
I designed this little box to hold my wife's stitch markers. It features a secure latch that is easy to open and close, but not accidentally. It is an easy print with a filament hinge.
This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…
Using the Customizer in this OpenSCAD file will allow you to design your own tray. You control these settings: Length Width Height Thickness The look of each wall: Shape – diamond or hexagon Size of shape Separation between shapes One…
This is a remix of my Box #1. I removed the compartments and added a seal on the lid. It features filament hinges and a very secure, easy snapping latch. It is an easy print with no support. For reference, the size of this box is…
After my Stitch Marker Box #1 had been in use for a little while, we noticed a slight deficiency. With only one lid and four compartments, bumping it (like a cat jumping up on your lap) could spill all four compartments. I modified the…
Design I have other PTFE release tools, but I wanted a release tool that would live on the tube and always be available. I designed this in Fusion 360 (included). It has an internal mechanism to lightly grip the PTFE tube to prevent it…
My reverse osmosis water system uses 1/4" and 3/8" push-to-connect fittings. These fittings are easy enough to connect, but slightly harder to release. You have to push in the little ring part and pull the tubing at the same time. Larger…
I made this for my wife. She said when the dish washing liquid bottle gets low, the liquid takes a while to flow down to the nozzle; but this kind of bottle will not stand on its own upside down and she needed to find things to lean the…
Update Version 2.0 This supersedes Magnet Storage Box Version 1.0 I have made all of the requested changes for the first version. The opening above the magnets (to allow you to see them) will now hold even the smallest sizes without them…
I liked this design, but felt the ring would not be sturdy enough. So I made it thicker. Without the original design, I just modified it in the slicer. With PrusaSlicer, I added a torus as a part and adjusted size and placement.
Give one of these to each of your humbug friends during the holiday season. If you don't want the loop on top, you can make it like a card. In Fusion, roll the history time line back between the 2 groups. The first group makes the main…
Clip your Sharpie to your ball cap when you are out and have no pockets. Quick, easy print.
A book stand or tablet holder. It snaps together; has 3 positions; and optional top and bottom page holder.
Features Quick, easy print No support required Parametric design Positive ratchet winding Design The Fusion 360 design (included) allows you to change the tube width and other variables. The included STL is set for a tube width of 58mm –…
My wife has 2 styles of commercial tuna can drainers. But when the can company went to pull tab lids, the commercial models quit working as the diameter of the new lid was slightly smaller. I took some measurements and studied the…
This is a remix of: https://www.thingiverse.com/thing:981574 I couldn't get it to scale like I wanted, so I designed my own version of it.
I designed this in OpenSCAD to create any size “S” hook you want. It is fully parametric with the customizer. I use it on my closet clothes rod. You could use it anywhere your imagination takes you.
This is another tube squeezer. I designed it in OpenSCAD (included) to use the Customizer to make it using your dimensions. It is a very quick, easy print with no support. I made several of different sizes. The included STL is for a…
I designed this tray in Fusion 360 for sorting or counting small items, such as pills, beads, or small parts. For reference, the tray is 100x100x12. The funnel part is about 22mm diameter at the tip.
This cutter is easy to print, easy to assemble, and easy to use. It cuts 3 sizes of tubing: 3/8” (9.525mm) used in RO water systems ¼” (6.35mm) used in RO water systems PTFE (4mm) Parts Needed 1 single edged razor blade 1 M3x20 screw 1 M3…
This is a completely customizable generator for making feet for furniture legs. Use the Customizer in OpenSCAD to set options and sizes. Creation Notes The included print file is what I created this for. It is a little unusual in that I…
I added a monogram. And cut it all the way through.
Features Set any of 8 light styles Set any of 8 fan styles Set overall diameter and thickness Set chain hole size (both top and bottom) Choose whether icon is raised or embossed (cut) Parameter Notes Chain hole Set the top hole large…
This generator will make all common size elastic threaders (also known as tape threaders and bodkins). It will also make a drawstring threader for round cord. How to use the Generator You may customize just about every dimension to create…
Changes It is thicker so it is easier to grip during removal from sheet. Thicker also keeps the parts further apart and allows for more sheet ‘bunching’ to fit between the parts. The “very thin” section is now thicker. The original had a…
I bought an electrical cord reel that did not have a guide. I saw other brands that had a guide (but other things I didn't want). I designed this one based on a close up picture of another. I printed in ABS as it would live outdoors. I…
This is a small Celtic knot with a 2mm hole on the back for sewing it onto a knitted hat. Printing I printed it face down, single color, no support, with PLA. The layer height should be a small as your printer can handle for the fine…
I made this 3/8" wing nut about 5 years ago using a model on Thingiverse . The original model includes Fusion 360 design code to allow you to create any size wingnut. I've waited for the designer to import it here, but that hasn't…
This box is based on my Basic Box design ( https://www.printables.com/model/202795-basic-box-with-snap-lid ). It is designed to hold the contents of the Boyle starter kit as a gift. I modified the first sketch of my Basic Box to create…
I designed this tool to make it easy to lift a silicone liner basket out of the air fryer. The liners came with little mitts that are awkward to use and tongs are no better. With this, you tilt it a little and slide one side into the…
I designed this keychain in Fusion 360 (included). It has the Indian head on one side and the name on the other side. It is 70mm long, 30mm wide, and 4mm thick with a 5mm hole. I printed it in PETG so it would be somewhat rugged. I had a…
This is yet another funnel generator made with OpenSCAD. It is based on one by salvador-richter . It has options for fins, flat handle, and rim.
This is a combination stitch marker and stitch counter holder. I've included a set of size 4 through 10. It's a nice companion to my size tags ( https://www.printables.com/model/209340-knitting-needle-tags ).
I found this rabbit graphic and made it into a token. It is 68mm across - so it is maybe coaster size. It could likely be scaled up or down to make it more coin size. I designed it in Fusion 360 (included). You can remove the year by…
This is a set of size tags to slide onto circular needles. The hole fits the needle and the size is shown. I've included a set of tags numbered 4 through 10. I print them in 2 colors so the numbers stand out. Update You may edit the size…
What you can do with this Generator This is a super generator (merge of 7+ generators) to design most kinds and sizes of of looms and various tools for use with looms, knitting, and yarn projects. You can also make several commonly used…
This tool is inspired by the Universal T Handle which I have used for years. I recently had a series of jams and decided I needed a faster way of doing the screws holding my Prusa MK3 extruder. I wanted to use my power screwdriver but all…
This is a system for draining All® detergent jugs. As these bottles are large and cumbersome with an offset lid, the upper bottle is held at an angle to ensure complete draining and stability. Assembly The straight tube goes on the…
We found that an Arizona Tea jug makes a very good container for storing used cooking oil. However, it takes 3 hands to pour and hold the funnel. Here is a solution. This adapter/holder screws onto the jug and has a short tube to insert…
I started this project to make a hook for the headrest of my truck. I only needed the one, but got carried away and made a fully customizable design that can be used for most any vehicle. Along the way, I learned a lot more OpenSCAD,…
This is another spool for loose large filament coils that I designed about 4 years ago. The pieces push fit together. It works OK, is fast and easy, but is a fixed size.
Design I decided to try my hand at designing a filament clip made with flexible filament. I was inspired by Making Things . I wanted good filament grip, easy to use, and fast print speed. I experimented with many sizes and shapes. I…
This is an OpenSCAD generator to create a custom sized holder/slicer for your muffins, bagels, kaiser rolls, sub rolls, etc. How to Customize It Measure your bready thingy – length, width, and height. Use the Customizer to set those…
This is another design for an adjustable, expandable filament holder for loose coils or samples. It supports filament coil diameters of 60-200mm. It uses snap together parts.
This is another box to hold a set of crochet hooks. I started with my Basic Box; changed the size parameters; and added the internal hook holders to the first sketch. Please see my parametric Basic Box upload for details about the design…
This is a simple holder for wiping pads that are about 55mm diameter. I originally designed this in TinkerCAD to learn that program. It was an interesting experience that helped me understand how TinkerCAD works - and what it's useful…
After seeing my wife add a sticker to her book mark, I thought about printing something on it. This variation includes a text character. The design could be modified to have a name or a design. And either one layer shallow like this one…
Update This model has been superseded by Transfer Funnel & Adapter System . --------- It is always slow to drain the last bit of thick liquid stuff from its container. This presents a small challenge when trying to save it. I found my…
This my latest (and final?) design for an adjustable, expandable filament holder for loose coils or samples. It supports filament coil diameters of 60-200mm and up to 3 coils (although I don't know why you would want to do that). Print…
This design is a box with a lid that latches. The lid attaches with a filament hinge. The overall dimensions are driven by the number of rows and columns of compartments and their size. The Fusion 360 design is parametric. This model is…
This design is a quick and easy replacement for a lost popsicle stick. It is not round like the original, but doesn’t need to be to function. It also prints with no support.
I've seen a few pill splitters, but they all have the same problem – they are only effective for one size of pill or caplet. I designed this one to handle all common sizes. Design I designed this in Fusion 360 (included, as always). These…
Design There are several press designs available. Many require parts like rods or rails. Some are all plastic but require support. I set out to design one that requires no support, uses only cheap commonly available hardware, and is very…
My wife knits - often with circular needles. They typically do not have their sizes marked on them. She keeps a size gauge handy, but it is much easier to look at a tag. The cables are about 1.6mm diameter. So to keep the tag loose when…
I designed this to hold a good lens from an old magnifier. I tried several methods of holding the glass and ended up with simple (but not very elegant). There is a small cut in the circle to allow you to work in the glass - then glue it…
I made this to hold small pads of note paper on my desk. And a slightly different size to hold cut pieces of paper towel to alcohol wipe my printer bed. It's a quick, easy design in Fusion 360 - with parameters you can easily change.
This is a Fusion 360 design (included) for a holder to hang on the side of a utility sink wall. It is meant to be printed upside down so no support is needed (although brim may help). The dimensions are 165mm long, 30mm wide, 80mm high.…
This is a hoop to keep a trash bag open. There are three parts: A vertical piece that slides onto the edge of the opening in the side of the console (GMC Terrain). A hoop that snaps into the vertical part and holds a plastic trash bag.…
I've made a few fidgets designed by others, but never tried designing one before. This is my first attempt and is perhaps a bit overengineered. But it meets my design goals: easy to operate, fast and easy to print, no support needed, and…
I have a sump pump that I use to drain old nasty water out of the horse's drinking barrel. I bought 2 discharge hoses (1 1/4") and I needed a coupling to stick them together to reach a good drainage site. I was unable to find what I…
It is always slow to drain the last bit of thick liquid stuff from its container. This presents a small challenge when trying to save it. I found my wife using funnels and clamps and trying to balance them for a transfer to the new…
I made this soap dish about 3 years ago of a model on Thingiverse . I've waited for the designer to import it here, but that hasn't happened. I think it is a very good design that needs to be shared here.
This is a bobble of a nozzle with the size number on it. I used 3dPrinty's negative space and spring and base. I printed size 0.4 and included the source design which can easily be edited. For those who can't edit Fusion 360 I included…
