Counting matching models…
Prusa CORE One Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. If you don't like the cable/PTFE management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…
A wall mount bracket to click-in the Bosch Professional GAL 1880 CV battery charger. There is a channel to support the active air cooling of the charger. Update 19. April 2026: Fits also the BC1880 charger. To take the charger with you,…
Core One MMU3 Y-Splitter using E3D V6 Collets, mountable on the Swing Arm. There is also a Y-Splitter with Bowden collets available if no E3D V6 collets are available. Changes 27. October 2025: Removed old files (obsolete), added step…
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
Modular Dolce Gusto Capsule Dispenser System A turntable version is also available Update 09. Mar 2025: Added two parts to beautify the system, closing unused openings Update 23. Jan 2025: Added another set of Units (Useful Stuff)…
CORE One PTFE Y-Splitter using Bowden Collets , mountable on the Swing Arm with cable brackets or velcros. This is a remix of my Y-Splitter with E3D V6 collets. This Y-Splitter is intended to be used when a MMU3 is mounted on the Core One…
A wall mount bracket to Click-in the Bosch AL 1115 CV battery charger, with an additional cable holder to roll up the cable when not in use. To take the charger with you, just click it out of the bracket. Use three 3.5mm countersunk…
Bottom low Tray with magnet mount for the Prusa Core One Side Storage from Prusa Guy Printing recommendation: PETG, 0.4 nozzle, 0.2mm speed, no supports For assembly you need: 2x magnet 12x6x3 (the magnet can be 12 to 15mm long)…
Updated on 2nd November 2024 deleted the horizontal version because it is difficult to print using the Articulated Arm Swivel Joint the horizontal version is obsolete made the USB cable channel 1mm deeper I wanted to attach the ESP32…
Original Prusa CORE ONE and CORE ONE L xLCD Status LED Diffuser (xLCD Type A and B) News 11. August 2026: Thanks to the user ProtaDec, my attention was drawn to the following finding. The description was adjusted accordingly. version R1…
Prusa CORE One Hygrometer - Thermometer mount for the CoreXY front rail, no magnets, no glue, just click onto the rail. Place on right or left side or wherever you like on the CoreXY front rail, can be easily moved on the rail or quickly…
Prusa CORE One Left Swing Arm Cable/PTFE Bracket with self adhesive rubber buffer for noise reduction. This improvement belongs mainly to the users of the swing arm brackets . When the Nextruder is moving along the Y-axis, the swing arm…
UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer UPDATE: 26. November 2024 Adapted the top-buffer-mount for R4 Cassettes (from bluex ) wich has 0.8mm more lenght space and guides to hold it better in place. Now it…
Replacement covers for Roto Centro 100 bottom pivot hinge of an old tilt and turn window (Internorm) Deutsch: Ersatzabdeckungen für das untere Ecklager von Roto Centro 100 Beschlägen eines alten Dreh-Kippfensters von Internorm Printing…
Purge Bin with a cutout for users of the right side wiper from S3BR4 . It is placed onto the two ‘alignment’ screws on the bottom of the core one, so that the bin can't move around but can very easily be taken out and in, no magnets…
Prusa Core One modular ball bearing spool holder with a metal axle to prevent bending (when active temperature control is used) Filament spool measures: Inner diameter 51 - 73mm, width 38 - 80mm Update 12. October 2025: To clarify which…
Update 9. November 2025: Updated all models to also be suitable for Batteries with a middle guideway. This is a combined remix of models from Peut and MeisterQ to get a modular mounting system for Bosch DIY 18V (Power for all Alliance)…
Universal Tube Squeezer , usable for all kind of tubes up to a width of 78mm. Available widths (max): 38mm, 46mm, 54mm, 62mm, 70mm, 78mm The tube squeezer consists of two diffrent parts (roller/connector), easy to print and assemble, easy…
Adaptation of MMU3 Cassette Compatible Buffer for Prusa CORE One + UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer After trying countless filament retraction systems (own designs and available on printables), I…
This is a set of 4 x Screwdriver-Holder, 4 x Plier-Holder, 9 x L-shaped Allenkey / Hexkey / Torxkey Holder for PAFEN / Kistenberg (old version only) / Botle / Valle Verde Toolboards (Toolwalls / Wallboards) The Holders can be combined and…
Owners, upgrading to the MK4S within the original Prusa enclosure need an adapter to mount the new version of the xLCD (version A) on the front. The new housing of the xLCD (2 moulded parts) does not fit on the enclosure without blocking…
Choose a name for your worx landroid lawn mowing robot and print it on the tag. Remove the original “WORX” tag and click in carefully your own tag. Modify the text to your own liking in Prusa Slicer (see picture 3). Printed with PETG…
This is a Bitblock holder for PAFEN / Kistenberg / Botle / Valle Verde Toolboards (Wallboards) which can be equiped with 4 of my own Bitblocks or PBSwissTools Bitblocks As an option i designed my own easy to print bitblock with no support…
This is a sorting tray with 12 outlets for the Gridfinity bin system. You can put it on a Gridfinity Turntable to make the sorting job even easier. Printing instructions: 0.4 nozzle 0.2mm Speed no supports needed 15% infill
A protective box to carry a spark plug as spare part with you. Two sizes (10 or 14mm thread) available. Features: Embossed text 'Spark Plug' around the box Grooved handle on the closure part Add text with prusa slicer to the top of the…
Core One + INDX spool mounting plates with integrated puck and number of the corresponding tool head, optimized for use of the USS Drybox. Update 14. August 2026: A version is in the works with 6 spools on the right and 2 spools at the…
Prusa CORE One L Swing Arm Cable/PTFE Brackets instead of the inelegant Velcro fasteners. This brackets are also better keeping up the cable horizontal along to the Extruder. If you don't like the cable/PTFE management with Velcro…
Core One + Gen2 INDX rear mount for the filament sensor with integrated cable management – no loose cables outside the printer. This rear-mounted bracket is designed to provide the shortest possible filament path from the sensor to the…
Update 2. July 2025 : two colored version added BMW R1300GS backed (two color) GS lettering at the side covers, choose your desired filament color(s). Easy printable without supports using PLA or PETG. Printing instructions: 0.4 nozzle…
This is a remix of the great Automatic MMU Buffer Cassette from firstgizmo to fit into the MMU3 compatible cassette buffer . I created this remix because this automatic cassette is significantly more user-friendly than any other available…
Update 18.02.2025 : Added a version with a closed ring. A print in place 'Clickon Bottle Carrier' with carabiner hook for transporting PET or glass Bottles up to 1 liter. To fix the carrier with the integrated carabiner hook to a backpack…
Replacement cover for Roto Centro 100 top shear hinge of an old tilt and turn window (Internorm) Deutsch: Ersatzabdeckung für das obere Scherenlager (Axerlager) von Roto Centro 100 Beschlägen eines alte Dreh-Kippfensters von Internorm…
This is a remix of the Einhell 4-Fach Akku Halter Power X-Change from MeisterQ I needed a wall mount / underboard mount for 6 to 8 Power X-Change Batteries and found the above modell which was well designed and easy to print. For…
Prusa Core One modular auto rewind spool holder using a spring, an adjustable friction clutch and a metal axle (to prevent axle bending) with a rewind capacity of 100cm. Note: Unfortunately there is no easy way to make a reliable auto…
This is a remix of the 'Remote switch Cover' only, from the excellent ' Power Switch Adapter ' model of FDMaker where i removed the io engraving (see picture below circle 2), added ON / OFF text instead and added a groove near the screw…
Easy printable dividers for Kistenberg (Prosperplast Brand) Truck storage bins 4" KTR12 115x80x60mm 8" KTR20 195x120x90mm Printing instructions: 0.4 nozzle 0.2mm Speed no Supports
Core One +/L variable Spool Holder for up to 2Kg spools. Thanks to vnb , providing the step file of his genuine extendable Spool Holder This remix can be used with the original O-ring, provided with the INDX upgrade or the USS Drybox.…
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
This remix uses the Filament Guides of the “ COBRA System for Original Prusa Enclosure " to set up a system for the MMU3 with all five spools inside the enclosure including the buffer. The following Parts/Models are used for the complete…
Update 3. December 2025: Added versions without debris filter. This model is a replacement of the acrylic top vent grille. There are 8 variants available, 4 are designed to prevent debris/parts from falling through the upper ventilation…
This is a remix of the ' Universal Caliper Mount ' for tool boards with 45 mm keyhole spacing. Thanks to the provided *.f3d file from swiss_beluga it was easy to adapt the mount to fit my tool wall system. Can be hung on a tool wall with…
A protective box to carry the NGK CMR6H spark plug for STIHL Chainsaws as spare part with you. Other spark plugs with the same dimensions and for other STIHL garden tools will fit also. Features: Embossed text 'Spark Plug STIHL ' around…
Prusa Core One Dual PTFE path from right side panel, one to original Nextruder , one usable for feeding to the MMU3 I wanted to use the right side spool holder also for MMU3 feeding. A ball bearing spool holder is now available, all parts…
Handbrake lever locking tool for all vehicles with brake lever on the handlebar Locks the handbrake and thus reliably prevents the vehicle from rolling away Examples of use: on steep terrain parking, during transport of vehicles by train,…
CoreOne INDX spool numbering plates Easily interchangeable number plates for the INDX system's original spool holder Fits the original spool holder of the INDX system. The size of the center pin (chock) can be adjusted in PrusaSlicer to…
Trial Motorbike brake hose cable guide for 38mm or 39mm front fork diameter. The part must be printed with a TPU filament (Shore 95A to 72D), otherwise it would not be possible to wrap it around the fork leg and insert the brake hose into…
Wallmount for Battery Charger of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor, using a 378wh internal or 378wh T.E.C. Pack Battery. Mountable with two screws to a wall or, using the holes on the backside with…
Cable mount for dual zip tie and screw fastening (to the wall or from the back of a panel) or double-sided adhesiv. Measures: 24x24mm sqare, type V1 9mm hight, type V2 10mm hight, max 5mm zip ties Easy to print, no supports needed. V1…
This is a Turntable with an optional crossed roller bearing and a Gridfinity pressure fit base plate. Thanks to Software2 i finally found a practical Gridfinity solution for magnet placement, all other solutions were quiet disappointing.…
Easy printable partitions with stiffeners for SSI (Schäfer) open front storage bins LF 211 ZW L 168 x B 103 x H 76mm LF 221 ZW L 234 x B 150 x H 122 mm Printing instructions: 0.4 nozzle 0.2mm Speed no Supports
Bosch Professional 18V cordless power tools GDR/GDS/GDX/GSB/GSR (blue series) Belt Clip Hook for wall mount. The hook can be used to hang the tool upright or upside down. Use two 3.5mm countersunk screws for wall mounting, for heavy tools…
On the Original Prusa enclosure there is an unsightly gap behind the xLCD (MK4). The cover closes the gap and improves the appearance, also nothing can fall in between and damage the open xLCD electronic board. Printed with PETG / 0.2…
Replacement covers for Roto Centro 100 hinges of an old turn window (Internorm) with three hinges. Deutsch: Ersatzabdeckungen für die Scharniere von Roto Centro 100 Beschlägen eines alten Drehfensters von Internorm. Printing instructions:…
This is a remix of the Extra Spool Holder for Prusa Enclosure - Extended Length from @KevinBarker . The longer spool arm is a great improvement for MMU3 users (having all spools within the enclosure) because of the easier access. There is…
I was in need of mounting brackets for Kistenberg Truck storage bins KTR12 and KTR20 and found the version of Vookimedlo quite usable. The mounts should fit to the Element System wallpanel or any panel with 45mm distance between the…
This is a cover plate for belt winders (roller shutter). The screw distance is 136mm. Print a new one when the original has got a bad color change due to sunlight. The available colors dont fit, print it yourself in your desired color.…
Honda Montesa Cota 4RT 260/300RR/301RR reinforced rear sprocket guard with M logo, printable as single or multicolored part (see picture below). Update 14. Sep. 2025: Added an enforced Version with Montesa 2026 design. Printing…
Prusa CORE One+ Gen.2 INDX Swing Arm Cable Brackets instead of the inelegant Velcro fasteners. If you don't like the cable management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable…
A lid for the screw-in ground socket of rotary clothes dryer. For everyone who has a screw-on ground socket and wants a different color of the lid or has a broken original lid. print settings: PETG, 0.20mm structural, 0.4 nozzle, 15%…
An opera balcony, composed of 3 parts, pluggable, wall-mountable, lighting possible, for placing e.g. Mini 13, Dummy 13, Lucky 13 figures (print at 150%). I made it for the figures of statler and waldorf from Alex as you can see at the…
A specially adapted oil funnel with a 2 cm offset in the neck for filling engine oil on the Montesa Cota 4RT . I used the oil funnel of WHerzog as a base, because of the well-fitting size, added an offset of 2 cm to fit the Montesa oil…
Replacement for the dust protection Rubber sleeve at the cable plug to Shimano XTR Di2 RD-M9050 Rear Derailleur. Printing instructions 0.4 nozzle 0.15mm Structural 100% infill use brim use TPU-95A (flex) filament
Designer wall mount hanger for storing/displaying cross-country skis and ski poles with a locking plate (click in on the hanger) to secure the skis and poles and a logo/name plate (click in on the locking plate) mountable with two 5x80mm…
This is a soft and grippy wheel cover for the Mini Vault with Lever Tumbler from @RoccosStuff for a more comfortable feeling when turning. It can also be used for the remixes from @Naheulbeurk and @GiveMeMyKidsBack There is a small and a…
Modular Dolce Gusto Capsule Dispenser System on a turntable A desktop/wallmounted system is also available A modular dispens system on a turntable with a base unit (2 capsules) expandable to a big dispenser system for desk placement. All…
1-6 numbered eject Buttons for the vertical mounted Prusa Mk3/4, Bambu X1C, P1, A1 Build Plate holder from Frantisek23 Printing recommendation: PETG, PLA might also work 3 perimeters 20 % infill, Gyroid no supports
BMW R1300GS Vario Topcase strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The tensile…
BMW R1300GS Vario Side Pannier strap eyelet replacement with skidpads in different colors, if you dont like the original black ones or dont need eyelets at all. The skidpads on the title picture are printed in PETG Galaxy Silver Mounting…
Core One + Gen2 INDX 4 Tool - 6 Tool - 8 Tool spool mounting plates with integrated puck and numbering, leaving the left side storage usable. Variants available: Standard mount 4 Tool or 8 Tool holdingplates (left or/and right side…
Designer wall mount hanger for storing/displaying alpine skis and ski poles with a locking plate (click in on the hanger) to secure the skis and poles and a logo/name plate (click in on the locking plate) mountable with two 5x120mm…
BMW R1300GS Vario Side Pannier strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet The strap eyelets on the title picture are printed in PETG Galaxy Silver Caution: The…
Elongated bowl with rounded corners 210 x 170 x 45mm On the underside are recesses for self-adhesive rubber feet Rubber feet recomendation: 10mm diameter, 3mm thickness Printing: no supports needed
A modular Opera Chair , two-color printing possible, no glue required, simply slot it together. The size is about 1:10 of a real life chair. Printing instructions: 0.4 nozzle 0.2mm Structural Supports Legs: use brim Seat: Organic Support…
This a Wing Lifter, Overrun Stand, Corner Bearing Protector or Transport Protection for PVC Windows Printing recommendation: Filament PETG, 0.4 Nozzle, 0.2mm Structural, 100% Infill, no supports Mounting instructions: (see picture below)…
If you like to use the " Mini Vault with Lever Tumbler " as a money box this inner box is recommended as internal storage. It can also be used to store various parts in the standard vault It solves the following problems: The vault does…
BMW R1300GS Vario Topcase strap eyelet replacement with skidpads in different colors, if you dont need the eyelets. The skidpads on the title picture are printed in PETG Galaxy Silver Mounting instructions Remove the original strap…
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
V2 of the rugged bracket for the lid of a JUWEL compost bin BIO 400 or BIO 600. Enhancements of V2: Easier to print with less supports, more stable mounting bracket. Printing recommendation: PETG 0.4 nozzle 0.2mm structural 3 perimeters…
Bosch Cordless PSR Easydrill 12V (green series) Wall Mount Bracket for direct mount or EU-Pegboard. It may also fit the GSR 12V series (blue/professional series). Can be used as Bosch 12V Battery storage (see picture below). There are…
This is a more rugged bracket for the lid of a JUWEL compost bin BIO 400 or BIO 600. A revised version (V2) is available here . The original bracket did not stand against rough weather conditions, therefore i made a rugged version.…
Swinging Arm Plug , a replacement part for the Beta Evo Trials Bike series, with the Beta Logo embossed or colored. The original part falls out very easily, this replacement part stays in place. Printing recommendation: PETG or other non…
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
The terrific Torture Toaster from Clockspring in colors For fine-tuning your multicolor 3D printer. Choose your own coloring within the slicer (see picture below) Printed it in 8 color PETG with a Prusa Core One + Gen2 INDX 8 Tools,…
Oblong bowl (210 x 170 x 45mm) with 5 underside recesses for self-adhesive rubber feet Rubber feet recomendation: 10mm diameter, 3mm thickness Printing: no supports needed
Protection for the mounting screw of Killswitch / Startswitch / Stopswitch from off-road motorcycles. This protector is pushed over the screw connection and protects against injuries or damage when contact is made with the screw…
Caps for the telescopic Prusa spool holder , featuring customizable visible information, coloring, and numbering. Caps with the correct vertical orientation (It shouldn't need mentioning, but there are many caps on Printables with wrong…
Wall mount bracket for the TechnoLine WT 536 or TechnoLine WT 538 Projection alarm clock with cable storage compartment. This bracket is used to mount the projection clock on a vertical surface in order to achieve the optimal position for…
Universal horizontal Stop for left Handlebar Grip (7/8" 22.2mm) This handlebar grip stop prevents the grip from slipping towards the center on the handlebar. It simply fixes the grip in the desired position on the left handlebar end.…
Core One + Gen2 INDX PTFE tube paths to the backside mounted filament sensors for 4 Tool, 6 Tool, 8Tool configurations Variants available: 4 Tool high mount (left and right side storage accessible) 6 Tool right mount (left side storage…
Oblong Bowl 210x180x60mm with 5 underside recesses for rubber feet and a front hole for pulling. Rubber feet recomendation: 10mm diameter, 3mm thickness Printing: no supports needed
Ossa 250i/280i/300i rear sprocket chain guard (protector). Printing instructions: 0.4 nozzle 0.20 mm Structural 3 perimeters 20% infill with gyroid fill pattern no supports PETG recommended
This GripLock for the left Domino A010 handlebar soft grip prevents the grip from slipping towards the center or rotating on the handlebar, something even the fastening wires could not prevent. It simply fixes the grip in the desired…
Prusa CORE One+ Gen2 INDX Bondtech Extruder Cable Sag Prevention, a modification for the cable routing from the swingarm to the Bondtech extruder. Non printable parts needed: Stainless steel cable tie 900mm x 7.6 mm ( sample ); 900 mm is…
This is a simple rod for removing the cap of a Prusa telescopic spool holder without damaging it. Printing recommendation: 0.4 nozzle 0.2mm Balanced no supports no brim How to use it: Insert the rod into the opening on the back of the…
A print-in-place fidget toy as an offroad tyre with an inner herringbone planetary gear Printing recommendations: 0.4 nozzle 0.2mm balanced no supports Can be used as 1 to 8 color model, choose your own coloring with the slicer. Original…
These are all currently available results.
