Search results: 100w

Sort order

Counting matching models…

P
Printablesjed

USBC-PD (Power Delivery) 100W Power Bank

I wanted to build a power bank that could support the USB PD protocol so I could charge all my devices off a single battery. I ended up with this 288 W/h power bank using 16 5000mah 21700 cells in a 4s4p configuration and leveraged a 100w…

Downloads
529
Likes
213
Rating
5
P
PrintablesWoojak

Power Bank 4s 100w USB TYPE-C

This is case for 4s2p package and 100W charging board from aliexpress. The power bank board works well on USBC with the PINECIL and PINECIL v2 device on 20V+. The LED display was desoldered from the PCB and glued to the housing on…

Downloads
475
Likes
90
Rating
5
P
Printablestearandfix

Case for 100w powerbank module with 4s2p 21700 batteries

Another powerbank case for a popular module from Aliexpress. It is designed to be printed without supports with 0.2mm layer height. Requires 2 M3x10 countersunk screws and 2 M3x12 hex head screws. The screws goes directly into plastic.…

Downloads
377
Likes
65
Rating
4.5
P
Printablesqwix

100W Power Bank USB-C PD - IP2368 / 4s3p 18650

4x M3 x 6mm countersunk 4x Threaded Inserts M3 X D5.0 - https://www.aliexpress.com/item/4000232858343.html IP2368 - https://www.aliexpress.com/w/wholesale-ip2368.html BMS - https://www.aliexpress.com/item/32808335825.html (4S 40A Balance)…

Downloads
368
Likes
94
Rating
3
P
Printablesapkhou

65W / 100W DIY Powerbank Case 21700 4S3P pack

Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…

Downloads
293
Likes
43
Rating
0
P
PrintablesRagaroah

Baseus 100W Mount with screwholes

Mount with screwholes for Baseus GaN3 Pro 4 Ports Desktop Charger 100W. I needed a simple sleeve mount so I can put the Baseus charger under my desk, where I can still easily get it out and take it with me. There's 2 versions, one which…

Downloads
283
Likes
39
Rating
5
P
Printableskjbturok

Remix PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY WITH USB PORTS

This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…

Downloads
272
Likes
27
Rating
0
P
PrintablesTim Witters

UGREEN Nexode 100W wall holder

Simple holder to attach the UGREEN charger to the wall with 2 screws.

Downloads
269
Likes
16
Rating
5
P
Printablesjed

USBC-PD (Power Delivery) 100W Power Bank (Airline Safe)

This 144Wh 100w USB-PD power bank is the the little brother to my 288Wh version . My main motivation was to have a large power bank that I could travel on airlines with. The TSA regulation is 160Wh max . I ended up with this 144Wh power…

Downloads
256
Likes
98
Rating
5
P
Printablestearandfix

Enclosure for 100w PowerBank module from Aliexpress

This is a simple case for a powerful powerbank module from Aliexpress and 5S 21700 battery. The assembly requires 4 small screws. The model is designed in FreeCAD. The source file is included. The supports might be needed for the screw…

Downloads
241
Likes
49
Rating
4

21700 4s PD QC 100W Power Bank Enclosure

Adaptation of a power bank PCB from Aliexpress with all major quick charging protocols and cell balancing. Holes are almost necessary. Heat output is around 10w in the worst case scenario. Cells overheat at maximum charging power even…

Downloads
204
Likes
29
Rating
0
P
PrintablesArtem Myshkin

Case for PowerBank 100W

The case is suitable for assembling 5S2P and anything smaller. Total 5 parts 1 - Outer case 2 - Substrate for mounting the board 3 - Back cover 4 - Front cover 5 - Rib/separation of the board and batteries (can be fixed with glue) For…

Downloads
201
Likes
29
Rating
0
P
PrintablesN0ciple

Ugreen Nexode 100W Holder with cable management

Vertical holder for Ugreen Nexode 100W charger. It includes cable holder to prevent damages on the USB C plugs. Print with supports. Stick it to the wall with double sided tape. Slots for cable should be able to take the Ugreen 100W PD…

Downloads
188
Likes
22
Rating
3.5

DIY 100W 130Wh 30,000mAh power bank project

Components you will need: 12x18650 cells, BMS preferably over 20A, power bank module(link in the description), cables that can withstand over 10Amps (the BMS is optional as the power bank module already has one, but i don't trust it)…

Downloads
176
Likes
34
Rating
0
P
PrintablesTyler Durden

100W USB-C PD Power Bank - IP2368 - 4S2P

Casing for 100W USB PD Power Bank, based on: IP2368 ( https://de.aliexpress.com/item/1005004705604260.html ) Needed: IP2368 board, BMS, 8 18650 Cells, nickel strips, cable, screws. Accents and cable holder are optional. Category:…

Downloads
148
Likes
35
Rating
0
P
PrintablesMatt

Synology DiskStation 100W power adapter cradle

A cradle designed to hold the 100W power adapter for certain Synology DiskStation NAS units. Specifically, the model “Adapter 100W_2” AKA “Adapter 100W Level VI” (Dimensions 13.7 x5.9 x3.5 cm, currently used by NAS models DS920+, DS918+,…

Downloads
145
Likes
20
Rating
5
P
PrintablesTom_Designs

Renogy 100W Solar Panel Mount

Mounts for mounting a 100W renogy solar panel vertically on a wall. Print out of PETG or ABS/ASA. Print the face that would be out down, so no supports are needed.

Downloads
131
Likes
23
Rating
0
P
Printablesgyrex

Ozito PXC 20V 100W USB-PD & USB-A (QC 3.0) Charger

I designed this 100W USB-PD/A (QC 3.0) charging box which plugs into an Ozito 20V battery. This is ideal as it completely charges up my Macbook and other USB-PD laptops at a full 100W. You can either print the top with USB-PD only or a…

Downloads
127
Likes
30
Rating
4.5
P
PrintablesTomáš

100W/120W/200W PTC electric Heater reduction/transition

reduction/pass through the enclosure wall for example for this heater: https://a.aliexpress.com/_mPlGPcS I didn't want the heater touching the wooden wall. So I created a reduction and at the same time a passage through the wooden wall.…

Downloads
124
Likes
21
Rating
5
P
Printablesshortyjacobs

Inkbird ISV-100W Sous Vide Bottom Cap

The model is one STL, but can be split into parts/objects to print the body and the tabs separately, helpful if your supports aren't perfectly dialed in. The parts can then be glued into the body, (I used ABS glue…super glue, solvent…

Downloads
114
Likes
3
Rating
0
P
PrintablesDavid H. Brown

Dehydrator Tray Extension for Commercial Chef CCD100W6 (formerly Westinghouse WFD100W)

Update 2021-02-24: If you're looking for an 88mm height, take a look at Sharkoctopus's remix at https://www.thingiverse.com/thing:4754084 which locks the pieces to each other all the way up. Update 2020-09-23: francisesmodewhite found it…

Downloads
103
Likes
16
Rating
5
P
PrintablesNewtle Kim

Powerful 100W Flashlight

refer video : I designed this powerful LED flashlight because I felt needs for a strong light in a lightless country life. I also made the high-powered battery pack used for this flashlights. I shared spot welder 3D models with the…

Downloads
98
Likes
33
Rating
0

Bosch 36V Ebike Battery connector with CAN pins (5 pins) 100W

Use an Arduino with MCP2515 to Power on the Ebike battery (MCP2515 lib needed) Used the components as described in https://www.printables.com/model/49417-bosch-36v-ebike-battery-connector-diy-2a-charger Isolate with heat shrink and hot…

Downloads
97
Likes
3
Rating
0
P
PrintablesDominik Pechac

DIY Powerbank 18650/26650 QC4.0 100W

A case for a power bank control board that fits 25x 18650 or x 26650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast…

Downloads
96
Likes
24
Rating
0
P
Printablesd3falt_

USB-C PD POWERBANK 100W

CZ Ahoj! Dlouho jsem přemýšlel čím napájet notebook, páječku, telefon a další zařízení, až jsem objevil modul 100W PD USB C na Aliexpressu a věděl jsem že je to přesně to co hledám. INFO Baterie je v zapojení 3P4S - 15000mAh 16.8V Modul…

Downloads
94
Likes
29
Rating
0
P
PrintablesElias baut was

100W DIY Powerbank Case

This is a custom-designed 3D-printable case for a 100W DIY powerbank project. It is compatible with a 5S2P lithium-ion battery configuration and includes space for a USB-C PD board. Youtube Video:…

Downloads
93
Likes
16
Rating
0
P
PrintablesNathan Milton

Power Bank Case 100W (Remix)

This is a remix of tearandfix's 8 cell 21700 battery bank model , but with the following changes: instead of using clips to attach the two pieces it uses plastic screws (M3*12mm plastic screws from this kit ) it uses a different power…

Downloads
93
Likes
24
Rating
5
P
PrintablesJ Hedel

100W Ultra Compact Portable LED Flashlight (ultra bright)

This is a VERY bright compact 100 Watt LED flashlight. It is powered by a 3s lipo battery and a led boost converter/controller. I have build many powerful flashlights before, but this is my favorite. Parts: The part list for this build is…

Downloads
91
Likes
29
Rating
0

PARABOLIC REFLECTOR SPOTLIGHT FOR LED MODULE 20-100W

Parabolic reflector for studio lighting, it could be mounted on my other lamp designs for standard LED 20-100W modules with 34mm hole distance Focal height 3mm, overall height 200mm Focal height 5mm, overall height 200mm You can print the…

Downloads
87
Likes
8
Rating
0
P
Printablestatertacoma

USBC-PD 100W Power Bank *Pro Max*

A 100w USB-C Battery Back made for 18650s, with a Switch and 2 additional USB-A ports. The pack is made for an 4s4p battery configuration. I have gotten a USB-C 100w Soldering iron and it holds up Ok, albeit struggling at higher loads…

Downloads
82
Likes
31
Rating
0
P
PrintablesLucasfrit

100W Flashlight

Here are the files and the code for a 100W flashlight. The flashlight has an OLED display that shows the temperature of the heatsink, brightness, fan speed, battery voltage, and battery percentage. The fan are temperature-controlled and…

Downloads
82
Likes
21
Rating
0
P
PrintablesSpaceToaster

Slim 100W usb PD power bank.

Powerbank capable of charging a laptop are generally expensive, but circuits that make these PD powerbanks function are not that expensive ( around 20 USD). Thus I designed a power bank shell to host 100W PD power bank module together…

Downloads
81
Likes
7
Rating
0

Makita 5s PD QC 100W Power Bank Battery Adapter

Adaptation of a power bank PCB from Aliexpress with all major qc protocols and cell balancing. Holes are almost necessary. Heat output is around 10w in the worst case scenario. PETG or ABS/PC recommended. PCB reaches up to 70°C. Screws…

Downloads
81
Likes
16
Rating
0
P
Printablessblomfield

Desiccant Holders for Commercial Chef CCD100W6

A useful print to hold indicating desiccant. When the desiccant changes color and has absorbed all the water has held it needs to be dried out. This typically involves laying it out on a cookie sheet and putting it in the oven for a…

Downloads
81
Likes
13
Rating
0
P
PrintablesMagnumSTRV103

TPA3116 2x50W and 1x100W Audio Amplifier Model

I made a model of the TPA3116 2x50W and 1x100W Audio Amplifier because there are no 3d models of this amplifier and i wanted to design a case for it before I had orderd it. NOTE: THIS MODEL IS NOT ON POINT ACCURATE! Link to buy the…

Downloads
76
Likes
7
Rating
0
P
PrintablesAnarchistPixel

100W TDA7492 Amplifier Enclosure

TDA7492 Amplifier Enclosure with SMPS and DAC. This enclosure houses the following components as seen in the pictures 1x TDA7492 100W amplifier 1x Arylic - Up2Stream Mini V3 1x 24V 6A SMPS 1x 150W DC-DC Buck Converter ( Bad idea, too much…

Downloads
75
Likes
11
Rating
0
P
Printablescasey

Dehydrator Tray Extension with Replica of Original Pattern for Commercial Chef CCD100W6

Printed on my Bambu P1S using PETG. Some filaments spool is bit tall, so I would suggest to print 83mm though 73mm can fit most.

Downloads
75
Likes
4
Rating
0

Functional 100W windturbine

This is a windturbine made from plastic waste. It can be made with easy to find parts and is completely open-source. With it's maximum power output of 100W, it proves that real power can be made with a much smaller carbon footprint than…

Downloads
73
Likes
15
Rating
0
P
PrintablesTheProjectWheel

Another Baseus 100W Mount

Please comment, rate, and post a make! Be sure to check out my other models! This is a sleeved mount for the Baseus 100W PD GaN3 Fast Wall Charger Block . The mount is designed to pass the wall plug through the back. The positive stop on…

Downloads
73
Likes
14
Rating
5
P
PrintablesAlexeyvik

100W Power Bank 4S 18650 Double C Port Two way Fast Charge

I modified the model to suit my needs - 4s1p instead of 4s2p, and also a newer revision of the board - 2 pieces of usb c, the screen in a different place Charging board link

Downloads
72
Likes
22
Rating
0
P
Printables_MyXiN_

UGREEN Nexode 100W Desktop Charger Mount based on Underware 2.0 Customizer

Thanks to the Underware 2.0 Customizer, I have adapted the mount for an UGREEN Nexode 100W Desktop Charger.

Downloads
69
Likes
7
Rating
5
P
Printablesspaghetti

Commercial Chef Dehydrator CCD100W replacement impeller fan

Replacement impeller fan for Commercial Chef CCD100W. Print in ABS! Do not print this with anything less than ABS-level heat tolerance. I didn't try any other filament types. Press fit onto the motor shaft. Don't press it down all the way…

Downloads
69
Likes
7
Rating
5
P
PrintablesPetar Ivanov

100W PD Power Bank USB-C (IP2368, 4S1P)

I decided to make my portable power bank with PD using IP2368. I used 4 batteries 18650 connected in series. The battery balancing board must be attached to the battery holders. No bushings are required! You will need a few screws: 4 x…

Downloads
68
Likes
17
Rating
0
P
Printablesbrandon young

Renogy 100w Solar Panel Corner

Designed this to add a bit of protection to the solar panels when used leaned up against something. * V2 has rounded corners which add strength.

Downloads
68
Likes
8
Rating
5
P
PrintablesLeonel Hesse

Modular 100W quick charging 21700 Powerbank

Modular 21700 Powerbank. The cheapest branded (samsung etc.) 21700 batteries can be found on nkon.nl (I am not affiliated with them). I am using a cheap ip2368 board from aliexpress for 100w quick charging.

Downloads
67
Likes
10
Rating
0
P
Printablesavolkov

DIY 100w LED COB video light / spotlight

This light needs articulated mount to be mounted on a light stand – https://www.prusaprinters.org/prints/75428-articulated-mount-for-light-stand-bracket All of the details in a blog post –…

Downloads
65
Likes
10
Rating
0
P
PrintablesMagnusT

Spotify Amplifier (2x50W + 100W sub + Rpi Zero)

A very small housing for a Raspberry Pi Zero W and a powerful 2.1 amplifier (~ $37) that drives stereo speakers plus a subwoofer (2x50W plus 100W for sub) I currently run this network music player package on the Rpi: www.moodeaudio.org…

Downloads
63
Likes
16
Rating
0
P
PrintablesMacioMan

Subwoofer Amplifier enclosure TPA3116D2 100W

Enclosure for chiniese bought subwoofer amplifier, I have designed it to be glued together, once put together, box have no openings for wires or any type of plugs, as that can be drilled if anyone have specific needs as per that.…

Downloads
63
Likes
8
Rating
0
P
PrintablesThe Stock Pot

UGREEN Nexode 100W Mount

A simple mount for the UGREEN Nexode 100w charger Printing Instructions I used PLA, but PETG should work fine. No supports necessary - orientation should be obvious

Downloads
62
Likes
7
Rating
0
P
Printablesimakeitstudio

Wall Bracket for Anker 100W 4-Port Charging Station

This is a wall mounting bracket for the Anker 100W 4-port charging station that I have that I designed back in early 2021. Since I wanted it to be wall mounted i left the port-side open so it could be easily removed if needed. fasteners…

Downloads
61
Likes
6
Rating
5
P
PrintablesA.D.

Photovoltaik Mast Halterung für 2x100Watt-Panele

Kunststoffteile für eine Photovoltaik-Mast-Halterung für zwei Panele (900x670mm). Angegeben sind unten die Teile für meine Konstruktion, natürlich sind wie immer anpassungen möglich ganz nach euren bedürfnissen. Für meine Halterung werden…

Downloads
57
Likes
14
Rating
0
P
PrintablesOK1HRA

Outdoor 100W antenna current balun box

BOM 2x printed parts (both sides are the same), select the type according to the marking 1:1 or 1:4 1x - Ferrite BN-43-7051 with 2x three turns of twisted conductor/pair 1x - UHF Female ( SO-239 ) 4-Hole Flange Panel Mount Coaxial…

Downloads
55
Likes
11
Rating
0
P
PrintablesAndreq

Dehydrator Tray Extension for Westinghouse WFD100W (Single part)

Found @davidhbrown model to be a perfect fit on my bed, I went ahead and remodeled the whole thing in F360 in 1 single part. Should be almost a 1:1 replica from his FreeCAD model. The "upper_pins" might be slightly different, but should…

Downloads
55
Likes
7
Rating
5
P
PrintablesSpeedy

UGREEN Nexode Power Bank 12000mAh 100W

-A simple cable holder for the Ugreen Nexode 100W Power Bank (UGREEN Nexode Power Bank 12000mAh 100W) will certainly fit other models of these dimensions. - Some Anker power banks have similar / identical dimensions - power bank…

Downloads
50
Likes
8
Rating
0
P
Printablesfreedom2000

tilting frame for flexible 100W solar panel

use 20mm diameter PVC pipe (electrical pipe in Europe), cut them at the right dimension for your panel and insert corners, and middle parts. use M6 screws and nuts to fix the corners and the middle parts attach a small rope to keep the…

Downloads
49
Likes
13
Rating
0
P
PrintablesSynergyx26

UGreen Nexode 100w GaN Power Bank

Skadis mount for the UGreen 100w 20,000 mAh Power Bank. Includes the ability to store the provided USB cable.

Downloads
47
Likes
3
Rating
0
P

Desiccant Dehydrating Container for Commercial Chef CCD100W6 / Westinghouse WFD100W

This tray is a resized remix of @sblomfield trays for the Commercial Chef CCD100W6 / Westinghouse WFD100 utilizing infill meshing. It is sized to fit precisely between the stacked plastic trays which come with the dehydrator. Top and…

Downloads
46
Likes
2
Rating
5
P
Printablesmhwlng

Gridfinity 4x2 Baseus 100W USB-C Charger Holder

Gridfinity 4x2 holder for Baseus 100W USB-C Charger (EURO plug) This model of charger has a EURO plug and a EURO socket at the top.…

Downloads
46
Likes
12
Rating
0
P
Printablesagepbiz

Wall Mount - Linocell Super Charger 100W

Two part Wall Mount for the Linocell Super Charger 100W https://www.kjell.com/no/produkter/elektro-og-verktoy/ladere/usb-ladere/linocell-premium-charge-multilader-pd-100-w-svart-p90281 use the mounting jig to line up the two parts and…

Downloads
45
Likes
13
Rating
5
P
PrintablesNoiseLab

Shroud for ZK-1001UM (100W Mini Amp w/ BT5.3, DSP, TWS, Mic Input, Reverb)

Super quick and dirty protective shroud for the ZK-1001UM, a mono mini amp based on the TPA3116D2 (9-24V input). I found this to be a very high value all-in-one amp, it just needed some sort of protective structure around the PCB to be…

Downloads
44
Likes
7
Rating
0
P
PrintablesRasul Ismailov

Power bank 100W 21700-5S1P

I decided to assemble my own version of the popular 100W power bank board on Aliexpress. For this, 21700 5000 mAh batteries were used. The assembly is extremely simple, you will need to carefully insert the display without damaging it. I…

Downloads
42
Likes
6
Rating
0
P
PrintablesSoftware2

Baseus 100W Power Bank Case

I have a thin Baseus 100W Power Bank that I want to mount into my bike's cargo basket. But it's a bit awkwardly shaped for mounting. Plus, I want to have a bit of rain protection, and hiding this expensive-looking bit of tech inside a…

Downloads
39
Likes
5
Rating
0
P
PrintablespartsMaker

100W Big LED and Lens Enclosure

This enclosure fits the big-style (like 100W) LED modules with the reflector and lens as separate parts. The design can be used as-is or easily modified and integrated into other projects. The problem with these things is that the parts…

Downloads
38
Likes
0
Rating
0
P
Printablesskyme

IP 2368 case, USB-C 100W 4 cells charger / powerbank electronics

I used M2 threaded inserts for the mounting of the pcb and M3 inserts for mounting of the case. Alternatively you can punch the 4 holes open und screw through the case (e.g. to screw it onto wood). I used PETG and it worked fine. PLA…

Downloads
36
Likes
2
Rating
0
P
PrintablesBen

UGREEN Nexode 100W Charger Cable Wrap

Simple cable management for the UGREEN Nexode 100W usb-c charger. Slip the frame over the charger and wrap those cables out of the way!

Downloads
35
Likes
11
Rating
0
P
PrintablesPublic_username

Renogy 100W solar panel feet

Protective pads for the bottom edge of a renogy 100W solar panel

Downloads
35
Likes
3
Rating
0
P
PrintablesMatīss Rapša

Baseus 65W/100W mount on IKEA LACK

Baseus 65W/100W mount on IKEA LACK furniture, will need to use supports

Downloads
35
Likes
6
Rating
0
P
Printablesatom2ueki

UGREEN 100W GaN Charger Under Desk Mount

https://www.instagram.com/reel/DAWUwaYuuJo/?igsh=MXJybW01eTY4d2pyaw== BOM: 4 * M3 x 10 self-tapping screw PLA, PETG or ABS filaments print with default setting of Bambulab A1 made for UGREEN 100W GaN Charger (not affiliate link)…

Downloads
34
Likes
1
Rating
0
P
Printablestearandfix

DIY 100W powerbank from Lenovo Thinkpad cells

I had some locked Lenovo Thinkpad batteries that no longer work with a laptop, but the cells inside those batteries were in good condition. They all have roughly the same capacity after testing. So, I decided to give those cells another…

Downloads
33
Likes
2
Rating
0
P
PrintablesJess Gutierrez

Enclosure for sub woofer Amplifier (AOSHIKE 8-25V 100W TPA3116 NE5532)

Enclosure for sub woofer Amplifier, there is slight play vertically, I am mounting mine upside down so i gave it a bit of horizontal play. Works either way, mounted right side up or upside down update. Split into top and bottom files got…

Downloads
33
Likes
2
Rating
0
P
PrintablesWiktor

Desk/Table Holder, Baseus Charger 100W 65W

Description Desk or table mount for Baseus 100W/65W charger. The mount consists of: Charger mount Desk mount TPU pad to prevent slipping Screw pad to protect the desk Two screws, with a 5.2mm insert Screw caps Screw pads from the bottom,…

Downloads
30
Likes
9
Rating
0
P
Printableswinqooq

SW3518s 100w PD/QC/SCP charger board case

For fixing module screw - M2, for fixing panels - M2 or M3

Downloads
28
Likes
6
Rating
0
P
PrintablesArtiom Ergheev

Enclosure for a 100W power bank, 5S3P configuration with 18650 batteries.

Power bank enclosure for 18650 batteries, designed for a 100W board. The front and back parts are recommended to be printed in PLA, while the top and bottom parts should be made from PETG. The display is desoldered from the board, then…

Downloads
27
Likes
4
Rating
0
P
PrintablesDetson

DIY 100W USB-C Power Bank Case - 5x 18650 (5S1P), MYZL-YD24 board

I built my own 100 W power bank around the popular MYZL-YD24-V2.32 board ("100W 5S Flash Charge Mobile Power Circuit Board") and designed this case for it. The case is only 97 × 23 mm in footprint: five 18650 cells stand side by side in a…

Downloads
26
Likes
8
Rating
0
P
PrintablesCurrentKits

100W USB-C Power Bank Adapter (Dewalt, Milwaukee, Makita, Bosch 18V)

EXPAND YOUR CORDLESS WORKSHOP TOOLKIT! Check out our other tools: - LED Work Light — High powered portable lighting for any job. - Portable Soldering Station — Cordless soldering station for field repairs & benchtop builds. Build your own…

Downloads
26
Likes
21
Rating
0
P
PrintablesRussell B

Extension for Commercial Chef CCD100W6 Dehydrator

The important points: An extension to use the 235mm (9.25 inch) CCD100W6 dehydrator for drying filament. I don't have much space, and wanted to use the smallest dehydrator I could find that still had at least 10mm of clearance around the…

Downloads
25
Likes
2
Rating
0
P
Printablesnikp123

100W Power Bank USB-C PD - IP2368 / 4s2p 18650

Read the originals' description for assembly and electronics instructions. This was made so that I can print it on a smaller 3D printer such as the Weedo Tina 2.

Downloads
24
Likes
4
Rating
0
P
PrintablesHuehnerpapst

MPB - 100W Flashlight Module

This is the Flashlight module for my Modular Power Block, This can be combined with all the large current modules of the MPB. For the base unit this model gets attached to, see here . The battery life can be several hours, depending on…

Downloads
24
Likes
3
Rating
0
P
Printablesmorni92

Ugreen 100W 4 port support

Ugreen 100W 4 port power brick sucket support https://cad.onshape.com/documents/ef6935319325c4aa4372ca06/w/cf0829c898deaa24be5da600/e/dffeccbcd64b1b85687af1f4

Downloads
23
Likes
1
Rating
0
P
Printablesjlips

Killswitch Battery Holder For Baseus 100W Battery

DBrand Killswitch Mount for Baseus 100W Portable Charger Easily mount your Baseus 100W portable charger to your Steam Deck using the Killswitch case. I wanted to make sure the screen was visible while in use so you can see how much…

Downloads
23
Likes
7
Rating
0

Anker Solar 100W Solar Panel Holder

Anker Solar 100W Solar Panel Holder

Downloads
23
Likes
2
Rating
0
P
PrintablesFyrby Additive

Satechi GaN USB-C 100W PD Mounts

🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed a mount for this power supply in my workshop after another power supply was found to be inadequate. This was made from a scan with a Revopoint POP2, post-processed in RevoScan and ExModel Lite. The fit is superb and…

Downloads
22
Likes
2
Rating
0
P
PrintablesQ-tec

Makita 18V Akku USB-C 100W 2000 Lade Adapter

Gedruckt in PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…

Downloads
21
Likes
1
Rating
0
P
PrintablesIvanZah

Power Bank 140W, 100Wh

This power bank is very easy to assemble and not so expensive). I ordered the power bank board and the BMS board on ALI. They cost me 11.3 dollars. The batteries are used from a scooter with a final capacity of 2500 mAh. You can use only…

Downloads
21
Likes
3
Rating
0
P
PrintablesAlex M

Filament Spool Spinner for Commercial Chef (Westinghouse WFD100W) Filament Dryer

This is made to fit on the bottom tray of a Commercial Chef (Westinghouse WFD100W) Filament Dryer/ Food Dehydrator. Nine ¼" inch Ball Bearings roll inside a track allowing the spool resting above it to spin effortlessly. (honestly, it…

Downloads
21
Likes
3
Rating
0
P
Printableschilloutmate .m

Airpot Cylinder - 100W100H v2

Perfect pot for plants. prevents overwatering and aerates the roots. improves root development.

Downloads
21
Likes
0
Rating
0
P
PrintableseWuPi

separation transformer case / obudowa trafo separacyjnego 100W Brewa

It is a housing for the BREWA 100W 230V/230V isolation transformer. LEDs, fuses, switch and socket are built in from the front. Power socket on the left. I also prepared ventilation holes (they are not calculated whether the hole is…

Downloads
19
Likes
2
Rating
0
P
PrintablesMPDev

Ikea Skadis Holder for Racoren 100W USB Charger

Mount/holder For Racoren 100W GaN Pro USB charger to be used with Ikea Skadis board. USB Charger Dimensions: 39.5 x 41.5 x 91.5 mm, corner radius 8mm Suits Racoren 100W GaN Pro USB Charger Print Settings Rafts: Yes Supports: Yes…

Downloads
19
Likes
3
Rating
0
P
Printableslfpoulain

100W LED Projector - Battery Powered - LFPoulain

Lien vers notre vidéo d'explications et de montage : https://lfp.yt/yt100wcob Bonjour à tous, Nous sommes heureux et fiers de vous présenter notre projet 100% fait maison. Il s'agit d'un projecteur LED COB de 100W alimenté par une…

Downloads
19
Likes
6
Rating
0
P
PrintablesStealthPrinter

Commercial Chef CCD100W6 Dehydrator Rubbermaid Storage Retainer

Retaining clips that snap onto the Commercial Chef food dehydrator. The unit is 240cm in diameter which is almost the exact same size as the Rubbermaid Commercial Products round storage container which I got on Amazon for less than $8.…

Downloads
18
Likes
0
Rating
0
P
PrintablesMaciejTy

BASEUS GaN3 Pro 100W charger holder - pole/post mounted

Mounting for a Ø30mm pole, for BASEUS GaN3 Pro 100W How it was printed: - 0.2 layer print - minimum 3 strokes - 30% fill Print time on Prusa MK3S <9h If you managed to print it out - please leave a comment. Maybe you have some comments? :)

Downloads
18
Likes
2
Rating
0
P
PrintablesEvgenius

PTC heater 100W

PTC heater 100W

Downloads
17
Likes
0
Rating
0
P
PrintablesSoguwe

Ugreen Nexode 100W Mount

Simple holder to attach the UGREEN charger to the wall with 2 screws.

Downloads
17
Likes
1
Rating
0
P
Printablesprinting_stuff

200W Portable Lab Power Supply & 100W PD Power Bank

Why did i build it ? I needed a powerful, portable lab power supply with modern USB-C capabilities. Long story short, looking at the market, there just weren't any good options that combined heavy-duty variable DC output with modern Power…

Downloads
17
Likes
9
Rating
5
P
Printablesgrappeq

Baseus 100W desktop charger magnetic mount

It's a pretty cool charger but doesn't come with a way to attach it under your desk - so I designed mount to do that using magnets :) Beware! Inserting the charger into the mount might leave some minor scratches that will become visible…

Downloads
17
Likes
5
Rating
0

Topsolar 100W Solar Panel Holder

Topsolar 100W Solar Panel Holder Print Settings Printer Brand: Creality Printer: Ender-5 Plus Rafts: No Supports: No

Downloads
16
Likes
1
Rating
0
P
PrintablesaNThiCu

Baseus 100W Charging Dock

You can print it with the text facing upwards for better quality (use brim if u have poor bed adhesion) or flat on its belly if u don't care about the text quality. I recommend taping it down with double sided tape . Happy printing !!

Downloads
15
Likes
2
Rating
0

Настольное крепление для блоков Baseus 100W GAN PRO

Модернизировал модель, под размеры 100 ватной версии

Downloads
15
Likes
6
Rating
0
P
Printableswinqooq

Screw SW3518s 100w holder

fixation with glue

Downloads
15
Likes
2
Rating
0
P
PrintablesFails&Makes

Kablosuz ve Hızlı Şarj Özellikli 100W Power Bank / 100W Power Bank with Wireless and Fast Charging

Bu projede, tamamen 3D yazıcı ile üretilebilen bir 20.000mAh kapasiteli, kablosuz ve hızlı şarj destekli 100W çıkış gücüne sahip power bank tasarladım ve ürettim. Model; elektronik bileşenleri güvenli şekilde barındıracak, ergonomik ve…

Downloads
15
Likes
3
Rating
0