Drill Gauge Metric 1 - 13mm
Size 1 to 13mm Fit for Measuring Physical specification: 97 x 190 x 3mm 9.7 x 19 x 0.3cm PLA or PLA+ or PETG
- Downloads
- 373
- Likes
- 28
- Rating
- 5
2,554 models
Size 1 to 13mm Fit for Measuring Physical specification: 97 x 190 x 3mm 9.7 x 19 x 0.3cm PLA or PLA+ or PETG
Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.
Designed for inserting 3mm, 4mm, 5mm, and 5mm diameter magnets into printed projects. Load a few magnets into the 10mm slot in the post in the desired orientation/polarity. These magnets hold the magnet on the tip in the desired polarity.…
½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden
M8 (13mm) nut adapter. I use for mower (handle folding). I printed model from PETG. czech: Adaptér matky M8 (13mm). Používám na sekačce (sklápění rukojeti). Tiskl jsem model z PETG.
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.
This is what I have made for my kids to play with. Simple design for connecting bambooskewers in diferent directions. You can cut sticks in different lenghts, I have cut them to 8 cm. It is smal part so use brim.
I got inspired to organize my electronic parts in test tubes, but wanted a better cover for them, that would eventually allow for labeling/customization. The caps provided are for a 13mm tube, 16mm tube, and the 16mm with test mmu label.…
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
EN Winding key for children's toy. Internal shape of the hole - square, 3mm. Print setting: 0.15mm Material: PLA Filling: 15% Collar: recommended Supports: print hot bed only (recommended but not required)…
Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Story: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector . After the first version, I have added some chamfers so you can print without any support. If you have any trouble…
Print with plastic that flexes a little, PETG or ABS will work. You can put it on or use double sided tape and and stick it somewhere. You may need support on the tail or feet.
Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Zigzain M3 knobs thumb screws set In set: thumb screw for brass insert nut thumb screw for regular M3 nut inside thumb screw for regular M3 nut outside (for thumbscrew with thread bolt) This set used on my Balancing stand ▶ model Source…
The stock lens hood is blocking too much of the OVF on my Fuji Xpro-2, so I made a more compact one. Printed with Prusament ASA, 100% infill for added stiffness. Uses the bayonet part from the original hood. Assembly is super…
Use case This support is designed to receive the Xiaomi Mijia LYWSD03MMC thermometers. I created it in order to be able to fix it to the wall or simply put it on a shelf. I added different models in order to fix it or place it in a…
These are small shims that always seem to disappear and are hard to find to replace. Take less than a minute to print and match the Aroma original well. 2.3MM thick and made for 3 MM shafts
Just a storage solution for my Molotow Acrylic Pens that I like to paint my PETG Prints with. The box can be used with or without the base in horizontal or upright orientation (see pictures). 20 Molotow One4All pens (diameter 13mm) fit in…
This is a remix of @Czo_275430's NORDMÄRKE base that supports phones with cover up to 13 mm.
Hi, Sinar lens board (139x139mm) with ~26,3mm hole, the circle which is “deeper” is 20mm deep and have 100mm diameter. Print in PLA laying on the front with supports inside the ring. 27.05.2025 / Added version with 30mm depth ring.
This is a bar end for bikes and motorbikes with a gas gas logo, it will fit any handle bar with a diameter of 14.33mm is the dimensions of this outside will bend a bit so can fit bit smaller bars aswell.
End cap for run of 13mm irrigation tube / pipe - insert and bend pipe back over to crimp the pipe and stop water flow. Benefit of using this instead of a plug is that it is easily removable without tools (and far simpler than a valve!)…
Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…
Bohrerbox mini für Bohrer 1, 1.5, 2, 2.5 und 3mm. Meistens braucht man zum basteln nur die kleinen… Die Bohrungen müssen möglicherweise etwas nachgebohrt werden. Filament: PLA extrudr NX2
Do understand this will be built from plastic and not as strong, as you may expect. Good enough for boiler anodes and some large non-critical bolts/nuts and for general home plumbing. To be printed with 100% infill. I added a sample…
Designed for Seven Master EB-303 Water Pump AC:220V/50Hz 10W Hmax: 1.2m Qmax: 600L/H From 13mm Flange to 1/8" Thread (for Festo Adapter) Edit : added Adapter with key width 14mm
Tool for measuring the distance between Z rod and Z screw I added an ironing modifier but I couldn't make it work well, the direction of the ironing would need to be the same for each layer. You'll want to print it with pla and on the…
I have a eurobox that I used for travel, bin which are 9u height fit perfectly inside. This is my solution to store my set of “small” spanners (6-7, 8-9, 10-11, and 12-13mm) Nothing special to print, mine is using standard quality (0.2mm)…
A Gridfinity Box with the dimensions of 2x3x3 for cards(for example dry erase cards). The box doesn't have slots magnets. Feel free to remix the model. I generated the other bins on the picture on the Gridfinity generator website.
After I discovered the brilliant magnetic model of @Ben, I wanted a docking part for it to finish my drybox setup. For this system you will need: PTFE PC4-M10 connector 6x3mm magnets (4 for each connector+4 for the endcap) A spool of TPU…
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Glass mount with hinge for broken or missing metal original bracket. Can be printed without support if printed the weaker way - Ironically it was designed to be printed the wrong way and now it can be printed that way without support ……
Introducing the Croc Clip —a fun and functional filament clip with bite! Designed in the shape of a little crocodile, this clip snaps securely onto your filament spool, keeping it neatly in place and preventing tangles or unwinding. 3mm…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
This is a drill bit holder to mount on french cleat or sit on the work bench. You can add drill bits from 1mm to 13mm in steps of .5mm. On the back there are already 10mm deep holes for attachment to a French Cleat holder. (there´s a…
Collection of Gridfinity basic cups height 7 (53mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
The nozzle on the air freshener at work was missing so I did a quick design and print for a replacement one. It's not the most beautiful design, but it works well and I feel no reason at this time to make an improved version. I used…
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
Secures LEDs against being pushed back in to the mount, since it features little latches. Fits in an 5.5mm hole with at least 1.0mm material thickness Printing is best be done with a 0.4nozzle and layerhights from 0.12-0.2mm. However,…
I printed the 16mm version of Waveman's sturdy infinity cube (thanks for sharing!) https://www.printables.com/model/88525-sturdy-infinity-cube but I discovered that it was fused just enough that I needed pliers to free the blocks (and…
This is loosely based on https://www.thingiverse.com/thing:2349048 , but I didn't like the overall print quality. After I saw a similar, foldable sewing aid somewhere to buy I constructed this sewing aid with 3mm, 4mm and 7mm (folded)…
A modified set of armor for the Dummy 13 Frame which integrates 3mm ports at various locations. Variants are included for some parts, incorporating varying numbers of ports, indicated by a “v1, v2, or v3” suffix in the file name. With…
Cable Organizer / Cable Clip - Clip RJ45 - USB Ø3mm USB Ø4mm - Ø6.5mm - Ø7mm - Ø8mm - Ø9mm - Ø10mm 12/01/2025 added: CPM_USB CPM_Ø7mm CPM_Ø9mm 19/01/2025 added: CPM_Rj45 Long Patch CPM_Ø6.5mm 10/03/2025 added: CPM_USB Ø3mm CPM_USB Ø4mm…
This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…
A modified set of armor for the Dummy 13 type-F armor which integrates 3mm ports at the waist, hips, and thighs. With this set, your Dummy 13 can be equipped with accessories of other action figures and model kits that use 3mm pegs, such…
M3 Screws, Length 3mm-40mm All made in Autodesk Fusion360
Collet type expander for filament spool, with an inner diameter of 63mm. Eliminates spool slippage in AMS. I recommend printing from PETG, 2 walls
Mushroom Shelf magnet with 6x3mm magnet holes
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
Note !! this is a remix however I cannot find the source any longer. The model is possible to screw to almost anything , it has a groove in the top to storrage a special size drill if needed and have 2 slots in the top for center drill…
Print Settings Printer: Elegoo Centauri Carbon 2 Slicer Profile: Stock / Default Settings Material: PLA (Stock temperature/speed) Layer Height: 0.2mm (Standard) Walls/Infill: Default (Stock) Supports: No (Designed for clean printing…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
This model is a part of the conveyor belt collection , but can be used standalone. Printing instructions: - Print flat Assembly instructions: - Press 2 M3 threaded inserts in the holes on the side - Use 2 small M3 set screws to secure the…
Replacement guard for the red, #1 3mm 1/8th inch guard for the Wahl Color Pro Hair Clipper Kit 79300 400. The clip on mine broke, so 3d printing to the rescue. Printing Notes Material I printed in PETG as the original guard's clip broke…
BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…
BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…
Simple interface to add the italian broom thread to wooden handle ø 22-23mm Semplice interfaccia per aggiungere la filettatura italiana per la scopa ad un manico da ø 22/23mm. Utile nel caso la filettatura del manico sia rovinata.…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
I loved the original and wanted magnets that were hidden and a pause to add some more colour to the print... I printed in Bronze silk then Rainbow silk to get the colour. 1st pause in the print is at the top of the magnets. At the pause,…
One of our Nalgene lids lost in a heated altercation with our dishwasher. This is a clean-sheet design that functions and seals much like the original. I printed this cap with the opening down and with supports (manual set) under the…
20May20 Marius-Bloemhof requested the CAD files: ( https://cad.onshape.com/documents/5425e358a4e266ea950b034e/w/fb495421e309359b374e4475/e/07ed980bcf8592c544c8964f ) Update 24Aug20: I've posted a new design for a blast gate based on a…
Holder/s for WD40, 3DLac and other sprays. Inner diameter optimized for 65 or 53 mm sprays. 3mf and bgcode for 1 or 3 pieces. Any number of pieces can be made. It is also possible to achieve a different diameter by adjusting the scale.…
remixed to have 3mm studs for easier changes.
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
Adapter rings that allow the use of spools with up to 83 mm inner diameter [Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS]
simple wall plugs in sizes from 3mm (too small probably no use but it prints fine so why not lol) up to 10mm. I’ve used them for a few shelves with no issues, but I wouldn’t mount anything too heavy or expensive since 3D-printed plugs may…
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.
Update 30 Sep 25 Michael Bohrer ( MichaelBohre_2970532 ) commented that he had broken this design because parts of it were too thin. On investigation, I agree that the outer edge of the connecting tube is thinner than I intended. I've…
Simple interface plate with 4 locking lugs on one side and a 17mm ball socket on the other. Quick and simple in PLA, will likely build one in PET-G in coming weeks. Overture Easy Black PLA 6 walls, 25% infill, Exterior to interior…
I added support for 6x3mm & 6x2mm Magnets. If you change the parameter in the original fusion file, the shape changes. I used the Push/Drag tool to change the hole for the magnets, to keep the shape of the model. Please leave a like ❤, if…
Remix of ( https://www.thingiverse.com/thing:3337602 ) Modified to accept a 10x3mm magnet since I had more of those than the 8mm ones. Thanks to HEIados for including a very nicely done Fusion 360 file to work with! To get the 10mm magnet…
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: The example pictured used a layer modifier to add ironing from 3.5-4.5mm. It's not necessary, but I did not test without it on. If you have never done…
A custom made paint bottle holder for the Multiboard system. It is designed to be mounted using two small T-bolts and has a capacity of 22 paint pots or bottles up to 33mm in diameter, like those from Citadel, Pro Acryl and other hobby…
3mm and 5.5mm crochet hooks. These should be printed with 100% infill. Please tell me if you want any in a different size by commenting.
A paint rack for multiboard that fits 33mm bottles like Citadel. 20x and 10x versions. Should fit both short and tall containers. The racks fit side-by-side. There is a slight gap when you do, as my modeling skills are pretty basic, but…
printed from PET-G, one body and 2 nuts. For body use brim, supports not required. if you need connector to 3/4" hose then set scale factor to 130% in X and Y coordinates for 1" hose connector set scale factor 200% in X and Y coordinates…
Bambu AMS Disconnect Tool with 5x3mm magnet for dual color print Remix of both versions (body from remix, letters from original) for dual color print and with an inset for a 5x3mm magnet. Thanks to @Jody and @HaraldGeisler for preparatory…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
I built my enclosure with V-slot 2020 Aluminum profiles and 3mm Acrylic Panels. Because the slot is 6mm wide, the panels were not very firm within the profiles, so I built these gaps. They also work in reverse, as a regular slot cover :)…
honeycomb basket for heavy items
This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…
I liked the original benchy stand as it was a great way to show off how my different filaments printed and looked like, but it requires you to glue the pieces together. I didn't like the idea of gluing 3d printed pieces and, once glued,…
Very Nice design from pekcitron. Thank you. I changed it to 42.3mm for the new Prusa MK3s+. Printed 0.2mm with 25% Infill in PLA. Youll only need a cutter knife. Put in PTFE Tube iD 1.8mm ( Important for MMU2s Users ) Slide knife in 1 an…
Compact detail sander with a 13 mm sanding width , designed for precise sanding in tight or hard-to-reach areas. Ideal for fine detail work, small parts, and controlled material removal. Cut Sandpaper Strip 13 mm × 183 mm (1/2″ × 7-1/4″)…
3mm Double-Bit Enclosure Key that is designed to the size of a typical tubular (barrel) style key
Metric Dimple Dies for 3mm Steel Print at 100% Or CNC for the larger ones 15mm 19mm 20mm 22mm 25mm 29mm 30mm 32mm 35mm 38mm 44mm 51mm 57mm 64mm Comes in 2 parts, a male and a female, if you know what these are, you'll know how to use them.
The bike stand is fitting for all popular gravel bike tires. I made it possible to print all parts on Prusa Mini. I glued the parts together with a Loctite plastic superglue. designed for 28 inches tire, works for smaller tires as well.…
Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
Paintball Bullet cal. 68 (17,3mm) Paintball Kugel cal. 68