Search results: 4in

Sort order

391 models

P
PrintablesRo3Deee

Embroidery sock frame for Brother 4in 10cm hoop

Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…

Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant

Downloads
816
Likes
66
Rating
0
P
PrintablesThrorin

HP DesignJet 500 - 24inch Roll Paper (Spool Holder)

My colleague had this plotter but the fins from one of the spool holders were cracking and finally broke off. He asked me if i could print one for him and i said yes. At first i did some search for a replacement part for the Spool Holder…

Print approx. €4.26–€5.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
10
Rating
0
P
PrintablesApok84

100mm (4in) Hose Clamp (More Sizes Added)

Update: April 20, 2026 I added more sizes per requests. Update: February 26, 2026 Per a request, I added the 80mm version and 165mm files to this. If anyone needs any other sizes, please let me know. Thanks! I like the original design…

Downloads
2,580
Likes
763
Rating
4.94
P
PrintablesBarcode Labs

Dust Collection 2.5 to 4in Hose Adapter

This adpater is designed to connect to a 4 inch flexible hose and reduce to a 2.5 inch flexible hose. The intended purpose for woodworking dust collection. The STEP file is included. Inlet Outer Diameter: 2.5 inches Outlet Outer Diameter:…

Downloads
1,515
Likes
198
Rating
5
P
PrintablesSKT

Hose Connector | Magnetic | Duct Adapter | 100mm 4inch

Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easer to print but don't…

Downloads
1,507
Likes
849
Rating
4.75
P
Printableskaje

Knob - 1/4in and 5/16in Star Knobs

The metric system is great, but sometimes you need an inch based version. These knobs are for 1/4-in and 5/16-inch bolts or nuts, and can be used in either the male or female version with the appropriate additional hardware (as shown in…

Downloads
1,444
Likes
153
Rating
4.83
P
PrintablesHuys

3in Duct to 4in Damper Adapter

Adapter to connect a 3" duct directly to a 4" damper or any 4" duct. Inner diameter of the large end is 100mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: Any Infill: 5%…

Downloads
1,283
Likes
58
Rating
4.89
P
Printablesjazzychad

4in (4 inch) duct splitter

This is a 4 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed. See also the Endcap model here: https://www.printables.com/model/637194-4in-4-inch-duct-splitter-endcap Source document:…

Downloads
1,117
Likes
143
Rating
5
P
PrintablesDbdf

4in round block mold box for making 2 part silicone molds, ideal for full sets of dice

The box's internal dimensions are 4in diameter by 2in deep. 4 asymmetrical keys allow you to easily line the mold halves up and create a very positive fit, which prevents shifting in any direction. Use binder clips to hold the halves…

Downloads
787
Likes
143
Rating
4.6
P
Printablesnolibert

Air System / Ventilation - Check Valve / Flap for 100mm / 4inch

Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but…

Downloads
697
Likes
161
Rating
4.8
P
PrintablesRichards Makes

6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums with accesssories

I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…

Downloads
688
Likes
140
Rating
4.25
P
PrintablesYeeve

120mm Computer Fan- 4in Duct Exhaust

Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.

Downloads
613
Likes
83
Rating
5
P
Printablesluma

Outdoor 4in/100mm vent cover

I needed a cover for a 4" exhaust vent and this project is the result! Features Fits 4"/100mm vent pipe Wall mount has standard 105mm screw spacing to fit a 120mm fan Flap model acts as a valve when used as an exhaust vent Modular mount…

Downloads
581
Likes
92
Rating
5
P
PrintablesKevin Barker

Gridfinity Bins for Mitutoyo Digital Calipers (4in, 6in, and 8in)

These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…

Downloads
574
Likes
58
Rating
0
P
Printablesjazzychad

4in (4 inch) duct valve volume damper

Assembly instructions coming soon… (hopefully it is pretty self evident) The only part that needs supports is the “Valve”

Downloads
565
Likes
102
Rating
4.5
P
Printablesharrisonpatm

Small 4in/10cm speed square

I am getting started in 3d printing, and I only have a small 6in bed to work with. I wanted to try out a speed square, but all the files I could find ready to print were 6in or more, and wouldn't fit on my bed. So this is basically my…

Downloads
551
Likes
43
Rating
5
P
PrintablesFleeeinIan3D

Prusa Core One Rear Ventilation Mount 3in & 4in Hose 90deg

Why? Using the Core One's rear M3 142x66 bolt pattern, I lofted that profile to a simple cylinder for 3” & 4” hose. I wanted to keep it as tight as possible to the back of the Core One, and point it vertically (90deg). For those of you…

Downloads
493
Likes
137
Rating
4.92

uncomplicated 4inch pipe magnetic coupler

Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…

Downloads
439
Likes
312
Rating
0
P
PrintablesAdam jelinek

Dust Collector Ball valve 4in

Fusion 360 file included (.F3D). Design aspects can be adjusted via 'parameters' in 'Parameters Table' ('MODIFY>Change Parameters'). Parameters to change are in 'Favorites' section. Imperial units used (inches), though fasteners…

Downloads
439
Likes
69
Rating
4.75
P
PrintablesJace

4in Wall Mount Pen or Tool Holder with Removable Grid

I took @ Cask_tools model and made it a bit taller. Also included is a taller divider, a model available with the grid built in, and both of those versions with NO HOLES so you can just use double sided tape. Mine is printed with a .6…

Downloads
403
Likes
44
Rating
5
P
Printablesigorprado

T-Square 15cm/6in and 10cm/4in. No-logo version available

Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…

Downloads
395
Likes
46
Rating
5
P
PrintablesCuriousRambler

Window adapter for 4in flex duct

Plenty of other options out there doing the same thing. None fit my window very well. I would not use this for high temperature applications like venting air conditioners or dryers, unless you print with appropriate filaments. Designed…

Downloads
376
Likes
276
Rating
5
P
PrintablesWill Norcott

120mm fan to 100mm/4inch duct adapter

I made this to adapt a 120mm fan to 100mm heat resistant duct so I can control the airflow to my smoker

Downloads
369
Likes
66
Rating
5
P
PrintablesBig Merona

Sand scoop 100mm(about 4inches)

This is a sand scoop with a diameter of 100 mm.(about 4 inches)The height is about 150mm. (about 6 inches) It can also be used to filter out cat poop. The material used was PETG. ADD Added 5mm hole type for cat poop shovel.

Downloads
364
Likes
144
Rating
5
P
PrintablesPaul

120mm computer fan to 4in dryer hose

Makes easy work to adapt a 120mm fan to a dryer duct. OD is 4in Wall thickness is 2.5mm (0.1in) Print instructions Category: Household Summary Makes easy work to adapt a 120mm fan to a dryer duct. OD is 4in Wall thickness is 2.5mm (0.1in)…

Downloads
361
Likes
44
Rating
4.67
P
PrintablesOutlander

1 1/4in Shop Vac Crevice Tool / Wand

I designed and printed this for my 4 gallon shop vac which had a 1 1/4in hose/nozzle (inner diameter) Print Info: No Supports No Brim (may be needed for some printers) Infill 10-20% Layer height .25mm

Downloads
354
Likes
30
Rating
5
P
PrintablesJake Hunsaker

Gridfinity 1/4in Metric Socket Holder 4-14mm

I couldn't find a socket holder I particularly liked that also had magnet holes in the gridfinity base, so here's mine. Holds shallow and deep 4-14mm sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of…

Downloads
354
Likes
63
Rating
4.33
P
PrintablesZoemaestra

ESP32 2.4in CYD case with kickstand (ESP32-2432S024)

A 3 part case for the 2.4 inch ESP32 CYD board with a built in kickstand that folds in flat. I use this with CYD-klipper on my Lemontron 3D printer. Requires 10mm M3 screw to secure the back on and add friction to the arm. Print in the…

Downloads
339
Likes
38
Rating
0
P
PrintablesClc02f

3/4in Billet Templates

Printing Templates To print these templates chose your favorite slicer and import the STL file. I use the Prusa slicer and I used the PLA config and 2.0 Speed settings. It might come out a little nicer with the 2.0 Quality but speed…

Downloads
320
Likes
73
Rating
0
P
PrintablesHerman K

MacBook Pro 14in Standing Dock with Cooling Vents

This functional 3D-printed laptop stand is designed for the MacBook Pro 16-inch model. It features a separate piece that holds the cables in place, which is then inserted into the main body to lock them securely. This prevents the cables…

Downloads
315
Likes
20
Rating
4
P
PrintablesETdoFresh

Peg Board Hook (1/4in Remix)

I needed a sturdy hook for my new peg board and the original STLs were too thin/skinny in my case. I made these STLs from scratch in Blender using Metaballs and paths tracing the original. Hopefully this works for others that have a peg…

Downloads
314
Likes
34
Rating
5
P
Printablessmysnk

Hydroponics Net Cup / Pot System for 4inch PVC Pipe

Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system, you simply use the cap + grommet pieces…

Downloads
314
Likes
60
Rating
0
P
PrintablesBonkadelic

120mm Fan to 4in duct

Simple connector for 120mm PC fans and 4 inch dryer duct (not a recommended application of a 120mm PC fan but it works for my purposes, maybe it'll work for yours too). Distance from the back of the fan to the start of the 4 inch section…

Downloads
309
Likes
43
Rating
5
P
PrintablesClough42

Starrett Combination Squares 4in and 12in Gridfinity

Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC

Downloads
307
Likes
54
Rating
0
P
PrintablesAstroStock

xTool F1 Exhaust Duct Adapter and Internal Fan Spacer (4in)

I wanted to connect my xTool F1 to the inline exhaust system I already had in my shop. I wasn't able to locate one specifically for the F1 so I went ahead and designed and printed one. This adapter connects to the xTool F1 and allows a…

Downloads
305
Likes
26
Rating
0
P
PrintablesJoel

4inch Kick Drum Microphone Port

I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…

Downloads
302
Likes
45
Rating
4.67
P
Printablescolbster302

Treasure chest 2in x 4in box with lid hinges and pins

i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…

Downloads
290
Likes
26
Rating
0
P
Printablesjazzychad

4in (4 inch) duct end cap

If you have some unconnected 4 inch duct that needs an end cap, then this is the model for you! Slide the duct over the opening and then use a ring clamp to hold it in place.

Downloads
285
Likes
25
Rating
0
P
PrintablesPBJ

Ocean Wave Picture Holder ( 4in X 6in ) - spiral vase print

The Ocean Wave Picture Holder is ideal for showcasing a 4in X 6in beach photo or a child's first surfing success. The 4in X 6in photo can either be placed directly in the wave, or attached to the optional simple frame print and then…

Downloads
281
Likes
75
Rating
5
P
Printablessmysnk

3.5inch Hydroponics Net Cup for 4inch PVC Pipe

For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…

Downloads
275
Likes
58
Rating
0
P
PrintablesRT3D

AC Infinity Fan to 4in Dryer Duct

I built an enclosure for my (6) 3d printers, but I didn't have an area to vent hot air without being blocked. I had extra dryer ducting laying around in the garage, so I designed this model to vent the air out. There are (2) different…

Downloads
272
Likes
41
Rating
5
P
PrintablesNiko

PRUSA CORE One Magnetic 3in and 4in Duct Exhaust Adapater

Updates: 26-Feb-2025 : V4 model Increased the size of the duct adapter significantly increased magnets holes from 4 to 9 added a 4in duct adapter requires about 7 in of clearance behind the printer (with duct attached) Requires about 200g…

Downloads
266
Likes
54
Rating
5
P
PrintablesJohn Hoke

MacBook Pro 14in (2023 M2) Vertical Stand - Voroni Edition

I re-engineered the width of the vertical supports, using much less filament and added a pass through Voroni cell pattern on these - both for esthetics and filament savings. Printed with 2 walls, 4 top and bottom layers with 10% gyroid…

Downloads
256
Likes
20
Rating
0
P
PrintablesAxField

Macbook 14inch M1 stand

A sturdy remix of the stand made by Mabur specifically for the 14" MacBook M1 Pro. His license doesn't allow Remixing for some reason, although the changes I've made are pretty significant in making the stand sturdier for your expensive…

Downloads
252
Likes
20
Rating
5
P
PrintablesJake Hunsaker

Gridfinity 1/4in SAE ('murican) Socket Holder

A Gridfinity socket holder for SAE/Imperial/American sized sockets. One model has “SAE” for the text, the other has a more whimsical 'MURICAN stamp, as seen in the cover photo. Holds 5/32 thru 9/16 sized sockets in 1/4in drive. I used…

Downloads
237
Likes
60
Rating
4.67
P
PrintablesBobbylicious

4in/100mm Dust Collector Hose Coupler (Left Thread)

This is designed to allow you to connect two 4in dust collection hoses together. I'm using Wen hose which has a reverse/clockwise spiral. None of the other designs I could find have the threads going the right way. This is still a work in…

Downloads
231
Likes
25
Rating
0
P
PrintablesEx-Pigeons

Saturn 2 Back vent to 4in Duct

Adapts from the backplate on the saturn 2 to 4in Duct.

Downloads
225
Likes
18
Rating
5

4in Plastic Nose Cone E-Bay for Rockets - Inverted Pursuits Lab

4in Plastic Nose Cone Electronics Bay build This design is also avaliable for purchase from my webstore: https://inverted-pursuits-lab.square.site/product/4in-plastic-nose-cone-electronics-bay/20?cp=true&sa=true&sbp=false&q=false Designed…

Downloads
221
Likes
16
Rating
4.5
P
PrintablesLaszlo

Gridfinity CNC/Router Bit Holder (1/8in, 1/4in)

These are storage trays for different common end mills that were designed for the Gridfinity organization system by ZackFreedman. If you want to see a video of how they work, check out my video on them: Storage Types: CNC Bit Cases (Loose…

Downloads
206
Likes
28
Rating
5
P
PrintablesSKT

Hose Adapter | 76mm to 100mm | 3inch to 4inch | Magnetic Connector | Duct Coupler

Set of adapter to connect a 76mm (3inch) hose to a 100mm (4inch) hose. Used magnets: 5mm x 1mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs.

Downloads
205
Likes
40
Rating
0
P
Printablesusmcletts

8in to 4in DUCT 6in Tall

8 inch to 4 inch duct reducer at 6 inches tall. I do have a shorter duct that is 4 inches tall. Dimensions are 8" ID to 4" OD by 6" Tall No supports are needed but may want to use a brim.

Downloads
205
Likes
10
Rating
0
P
Printablesdhv83

120mm fan to 4in dryer vent adapter.

Fan adapter made for an Laser Engraver to accommodate 120mm x 38mm ac fan to adapt to a 4in dryer vent.

Downloads
199
Likes
50
Rating
0
P
Printablesptmays

Nut and bolt storage boxes 4in wide 3.5in tall, multiple lengths and compartments

I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls…

Downloads
199
Likes
9
Rating
5
P
PrintablesKnockedover

Wolf wall art, 14in x 10in

This was an existing design I found online but it was very small. I wanted something larger to hang on my wall but as my print bed is small I had to split the model into 4 pieces. Once printed I fixed the parts together using epoxy glue,…

Downloads
192
Likes
71
Rating
5
P
PrintablesTyler Harris

4in mecanum wheels, 1/2in hex axle

Print 2 of the side and 8 of the roller for one wheel. Mirror the side pieces for vectoring in the opposite direction.

Downloads
191
Likes
22
Rating
0
P
Printablesbonkerz

Closed end wrench for Kohler 4inch flush valve nut

I was replacing my flush valve, Kohler 1216610, found this big nut that was just over 4" across the flats. I don't have an adjustable big enough, so quick design and print to save the day. Print this strong, use at least 20% infill, more…

Downloads
188
Likes
4
Rating
0
P
PrintablesMZA

4inch to 2 inch duct adapter

Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps

Downloads
188
Likes
10
Rating
0
P
PrintablesCuriousRambler

Gweike G2 4in Duct Table Vent

I printed from PETG with supports on build plate only, oriented with the round duct on the build plate. The riser is a separate piece in order to allow the ‘tail’ of the vent to be supported off the laser table at various heights,…

Downloads
187
Likes
17
Rating
5
P
Printableskaje

Digital Caliper (Carbon Fiber ) Box Container Holder - 100mm 4in - Hinged Print in Place

This box was made specifically for low cost plastic (carbon fiber) digital calipers with 100mm (4in) range). These calipers measure only to 0.1mm (0.01in), but are still useful for many types of measurements. One drawback they have is…

Downloads
181
Likes
18
Rating
4
P
PrintablesChris

Pipe support clamp for 3/4in type L copper and 3/8in threaded rod

Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for…

Downloads
179
Likes
35
Rating
0
P
PrintablesCapnTeriyaki

4in Exhaust Duct Adapter For Elegoo Saturn 4

Remixed Saturn 4 Exhaust Duct for 4" Flexible Duct Included Straight and 90° Elbow versions

Downloads
172
Likes
10
Rating
5
P
PrintablesDaveRig Design

Split Blast Gate (4in to two 2in)

I started with the original single blast gate design from Jok and resized and made some modifications. Then for added the single 4 inch intake port, (or output port depending on how you want to look at it) The 4 inch side will fit a…

Downloads
172
Likes
30
Rating
0
P
PrintablesBarcode Labs

4in Magnetic Flexible Hose Coupling

Description 4 inch flexible hose magnet coupler. The magnets are overprinted so that they are completely embedded into the coupler. There is a 2 degree taper on the hose insert to allow it to slip on easier. Short Clip of Coupler The STEP…

Downloads
170
Likes
35
Rating
0
P
PrintablesWiseone

1/4in Metric Socket Rail

To avoid hunting for the right size socket in my socket box, I decided to organise my sockets in an ordered way. This 3D print provides a tray that my sockets sit in. The sockets are easy to get out and to replace. Each socket hole has an…

Downloads
163
Likes
24
Rating
5

6in, 4in and 2.5in Duct Adapters for Dust Collection

These are a bunch of adapters for adapting from 6in and 4in DWV pipe and adapters down to 2.5in for duct collection applications. The "4in Duct FItting to 2 - 2.5in Spuds" fits inside a 4in DWV fitting. The "4in Gate Valve to 2 - 2.5in…

Downloads
161
Likes
39
Rating
0
P
PrintablesMichaelR

65mm Dust Shoe with 4in Dust Port

Simple to print dust shoe for 65mm Spindles. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I don't have the ability to test it on all cnc routers with 65mm spindles…

Downloads
160
Likes
13
Rating
0
P
Printablesjazzychad

4in (4 inch) duct splitter endcap

This is an endcap for my 4-inch duct splitter model, found here: https://www.printables.com/model/634619-4in-4-inch-duct-splitter If you need to prevent use of one of the outlets, you can just push this piece on, and it will clip itself…

Downloads
156
Likes
37
Rating
0
P
Printablesjmynheir

4in Round Electrical Box 9, 15, 22.5, 30, 45 & 90 Degree Adapter Plate for Floodlight Cameras (rotatable)

9, 15, 22.5, 30, 45 & 90 degree angle adapter able to mount to 4" Circular electrical work boxes for cameras, floodlights, etc. There is a flange part, and an adapter part. Category: Household

Downloads
151
Likes
22
Rating
0
P
Printablespolwac

Connector for Chicco, Baby Hug 4in1

Connector for Chicco, Baby Hug 4in1 v4 .3mf file has two components(you can separately regulate the length you need for each side). I printed these connectors with 40% infill and the middle section with 100% infill for more strength and…

Downloads
151
Likes
0
Rating
5
P
PrintablesPlasticMelters

4in1out ptfe bowden splitter 4in1 with ECAS fittings 4 way

print with 4 walls and 25% infill if your printer isn't calibrated great increase size by 0.5-1.0% as i have made the ecas fitting ports tight intentionally so they are a press fit requires 5 ecas fittings i have also added mounting holes…

Downloads
149
Likes
24
Rating
5
P
PrintablesMartinD

Laptop stand for 14inch computer

Holder for 14 inch laptop. You need two parts of it → print it two times. Printed without top and bottom surface, honeycomb infill.

Downloads
144
Likes
18
Rating
5
P
Printableseltoids

4in (4 inch) duct splitter 2 versions

I wanted to combine jazzychad's 4 inch duct splitter with the duct valve. There's two versions of the splitter. I also changed the knob because I didn't like splitting up the knob with the bolt. The rest should be the same but there could…

Downloads
142
Likes
31
Rating
0
P
Printablesusmcletts

8in To 4in DUCT 4in Tall

8 inch to 4 inch duct reducer at 6 inches tall. I do have a taller duct that is 6 inches tall. Dimensions are 8" ID to 4" OD by 6" Tall No supports are needed but may want to use a brim.

Downloads
141
Likes
6
Rating
0
P
PrintablesMino

Sprinkler irrigation system Nozzle variable spray sizes for 4mm ID Tube 1/4inch

I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…

Downloads
138
Likes
15
Rating
0
P
Printableshiroken55555

4inch dryer exhaust duct vent for wall or plywood for heated chamber or enclosure

4inch dryer exhaust duct vent for wall or plywood Drill 102mm diameter hole to insert this. It might work for your heated chamber enclosure.

Downloads
135
Likes
25
Rating
0
P
PrintablesShameless Makes

140mm Fan to 4in Duct Adapter

Mount to the 140mm fan opening on your PC case to help exhaust the heat out in a controlled fashion, and avoid all of that extra heat during those already hot summer days. If your PC case has 140mm fan openings, you can place this vent…

Downloads
129
Likes
13
Rating
0

Xtool P2 exhaust adaptor for 10cm (4inch) hose

This is a basic adaptor to be able to use a 10cm (4inch) exhaust hose. No need for extra hardware. One part print only. This is a very basic design but it does the work very well. No need for extra tool or fitting. No need to dismantle…

Downloads
126
Likes
5
Rating
0
P
PrintablesYell

Magnetic Hose Connector 4inch

changed holes for 6mm magnets added rim removed male side thicken the shell added Bridge Counterbore

Downloads
124
Likes
17
Rating
0
P
PrintablesGcodeGearHead

ECAS 4into one Filament Hub V4 Toolhead

This is a 4 into 1 ECAS fitting which fits into the top of the V4 toolhead. Attributing the model I used here as otherwise the licenses together prevent uploading a remix…

Downloads
122
Likes
25
Rating
0
P
PrintablesRob

Floor Sweep Vacuum Attachment for 4in dust collector and Dewalt Shop Vac

This model is a floor sweep attachment for two types of vacuum systems. The first variation is for a 4in shop dust collector using standard 4in flexible hose. The second is for a Dewalt 8 gal Shop vac. The design was inspired by other…

Downloads
121
Likes
30
Rating
5
P
Printablesrxg

Voltset VS-100-4IN 4 inch inline duct fan blade

Description This fan had a blade break off, so I reverse engineered it in FreeCAD using point cloud data from a 3D scan using Revopoint MetroX. It's a Voltset model VS-100-4IN 4 inch inline duct fan, and their support confirmed they do…

Downloads
121
Likes
27
Rating
0

Din Rail to 4in square junction box mount

A din rail mount for a 4in square junction box. M5 sized holes. You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…

Downloads
121
Likes
29
Rating
0
P
Printablesfouronenine

4in Dryer Hose Clamp

My Dryer Vents into our attic but the hose kept fallout out of the fitting in the ceiling. So, in an effort to solve the issue, I developed this simple clamp to tie the hose to the wall. Designed for a 4 in hose.

Downloads
120
Likes
13
Rating
0
P
Printablesiporty

Vacuum Nozzle for 4in Flexible Dust Hose

I use this to clean up my cnc table using a 4in flexible hose. It's more efficient than just using the end of the hose. Dropping the nozzle etc can easily cause it to crack so print in the toughest material that makes sense for you. It's…

Downloads
120
Likes
26
Rating
0
P
PrintablesroosterCorn

4inch dust collection port

4inch dust collection port. It looks like a cylinder, but it is slightly tapered. The dimensions of this roughly match what is built in to some of my tools that have built-in dust ports. A standard 4inch hose can fit over it, and all the…

Downloads
119
Likes
22
Rating
5
P
Printablesn9dmt

Flange for 4in HVAC Hose

A flange for 4in HVAC hose commonly found in hydroponic systems. Mounting screws are spaced to fit 120mm PC fans.

Downloads
119
Likes
15
Rating
5
P
PrintablesJonathan

Hose Connector | Magnetic | Duct Adapter | 100mm 4inch

This is a remix of the Hose Connector | Magnetic | Duct Adapter | 100mm (4 inch) designed to work with 10mm x 1.6mm magnets . I use this setup to easily switch the exhaust output between my 3D printer and my microsoldering station . The…

Downloads
118
Likes
26
Rating
5
P
PrintablesAnson Liu

5.9 inch diameter AC window vent to 4inch female duct adapter

This adapter lets you connect a 4 inch air duct with mass produced 5.9 inch window vents. This has flanges for locking into the window vent like the normal window vent cover and even has space for the vent bird guard/bug screen to be…

Downloads
117
Likes
19
Rating
0
P
PrintablesOtakontrol

1/4in camera mount adapter for OSR2+/SR6

1/4in mount for the AMPS holes in the OSR2+ (do the SR6 and SSR also have these holes? Idk) Just press-fit a 1/4 nut to make your machine compatible with any camera mount or clamp and add bolts. SUPER rigid mount, no wobble at all! Since…

Downloads
113
Likes
6
Rating
0
P
PrintablesJankeyJeff

4in Test Tile Die for clay extruder

This is a test tile die that should work with most 4in ceramic wall mounted clay extruders similar to this one https://www.northstarequipment.com/Extruders.htm . I use the 2 bumps as a way to show 1 dip and 2 dips on a glaze test tile. I…

Downloads
108
Likes
12
Rating
0
P
PrintablesMark Schramm

Home Assistant Panel Case for Waveshare 4inch Square Touchscreen + Raspberry Pi 5

This case is for the Waveshare 4inch Square LCD: https://www.waveshare.com/wiki/4inch_DPI_LCD_(C) It has cutouts for a Raspberry Pi 5 but should fit other fullsize Pi models. It has openings for MicroSD card, power and USB

Downloads
103
Likes
23
Rating
0
P
PrintablesTim

Smartphone Holder - GoPro Mount and 1/4inch Thread

Smartphone Holder for GoPro / Actioncam mount or 1/4 inch camera tripod (in the making) thread. For phone with a width between 61mm and 87mm. Maximum depth of 10.5mm. No Support needed. Printed with 20% infill.

Downloads
102
Likes
16
Rating
4.67
P
PrintablesBobbylicious

4in/100mm Funnel Port for Dust Collection

This is designed to maximize the size of the funnel to fit an ender 3 print bed. It was designed with a contractor/cabinet table saw in mind. It was designed with 4in/100mm hose in mind. I have an old Delta/Rockwell table saw with a big…

Downloads
101
Likes
17
Rating
5
P
Printablespoprhythm

Duct Mount with printed hinge - 4in, 5in, and 6in

Thank you Scott Walsh for permitting a remix of your great design . Here's his video which describes how they're used and some helpful tips on putting together dust collection system . No support needed. PrusaSlicer complains about…

Downloads
101
Likes
9
Rating
5
P
PrintablesChiknmn

Delta 14in bandsaw hose adapter

I needed to control the dust on my bandsaw and i didnt have a reducer for my hose. so i made a better option. This part is a direct drop in replacement for the Delta 14" bandsaw, with this print your bandsaw will now accept a 2" hose.…

Downloads
98
Likes
12
Rating
0
P
PrintablesTonyPTX

IdeaSpark ESP32 1.14in TFT Deep Freezer Temperature Monitor

This is a basic built to allow you to integrate an ESP32 device to monitor a "dumb" freezer and set alerts for any malfunctions before items inside the freezer spoil if they thaw by integrating into HomeAssistant via ESPHome. Wiring is…

Downloads
97
Likes
5
Rating
0
P
PrintablesBuilderDadDan

4in Dust Pipe Mount

I designed this 4in dust pipe fitting to work in conjunction with a 6in dust pipe fitting ( link ) for mounting my pipes to the ceiling of my basement shop. Since my shop has low ceilings I needed to keep the pipe very close to the…

Downloads
97
Likes
33
Rating
5
P
PrintablesLee Wilson

XTool D1 3in to 4in Magnetic Quick-Disconnect Coupler

Allows the XTool D1 enclosure vent hose to be used with the excellent Magnetic Quick-Disconnect system designed by Once in a Six Side

Downloads
96
Likes
17
Rating
0
P
Printablesmonkfe

4in duct bulkhead fitting for grow tents AC Infinity

I needed a 4in duct fitting after installing my AC Infinity AC unit as there were no more pre installed holes. This worked great. I used 5mm brass inserts in the plate. printed with the shorter length down with supports. The nut plate…

Downloads
95
Likes
22
Rating
0