Search results: 5k

Sort order

390 models

P
PrintablesJRT3D

Recreator 3D MK5Kit Ender3 Pultrusion Unit

Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant

Downloads
23,494
Likes
2,360
Rating
4.77
P
PrintablesNoxispike

Qudelix 5k case

PETG friendly-ish case for Qudelix 5k. I've not tried printing in PLA, as the installation requires some flexibility to the material. But maybe PLA can work too? It's a snug fit. Be careful near the buttons. There's a chance for the…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
187
Likes
17
Rating
5
P
PrintablesWinner

Bag hanger. Ultra fast. Up to 25kg

0.20mm layer PLA Really quick print. Endurance 25kg

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
26
Rating
5
P
Printablesron

Large spool holder (300mm or 350mm diameter - 2.5, 3.5, 5kg). Smooth rolling.

Large spool holder. PTFE contact. No spool swinging. Maximum spool size is 105mm width at the axis. There are two configurations. One is for 300mm max diameter spool, then usual 2.2kg spool fits ( SpoolHolder-rxxx - d300-I3D-1). The other…

Print approx. €20.58–€25.15 excl. taxPreliminary estimate for one variant

Downloads
130
Likes
14
Rating
5
P
PrintablesWaffleStaffel

Diesel Heater 5kW-8kW air intake guard

Spliced together Silver_Surfer234 's 2kw intake screen and Schaffer.la 's linear drain screen to make a less restrictive screen, increasing the air flow by approximately 20% or more. This is especially helpful when you have extensive…

Print approx. €4.82–€5.90 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
15
Rating
5
P
PrintablesFloatingCam

5KG Bearing Spool Holder with Brake

The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…

Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
39
Likes
4
Rating
0
P
PrintablesDrak

Universal Heavy-Duty 5kg 10kg Spool Holder - Drak

Assembly Video Story Hello there! I couldn’t find the perfect spool holder for my massive 5 kg Sunlu ABS spool, so I designed my own: adjustable, portable, and lightweight This spool holder was made to use spare bearings from my Voron…

Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
3
Rating
0
P
PrintablesSascha Curth

Funnel for kitcheAid flour mill 5KGM (Getreidemühle)

Using KitchenAid flour mill usually means unnecessary spilling as the bowl is too low. So what is the easiest, simple solution? A perfectly fitting funnel to guide every single particle into a wide-mouth ball glass. Print with PETG as…

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
23
Likes
5
Rating
0
P
PrintablesRyan Middleton

5kg Spool platform for Prusa

Frame mounted platform for 5kg spool holder for Prusa printers used to support https://www.printables.com/model/62861-zyltech-texashuge-spool-holder-5kg-spool-4x-608-be

Print approx. €11.10–€13.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
1
Rating
0
P
PrintablesKuki

Erhöhung für grosse Filamentrollen (2,5kg)

Erhöhung, gemacht für grössere Rollen (2,5kg) damit diese nicht mit Werkzeughalter und Z-Achse zusammenstossen. Viel Spass damit.

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant

Downloads
3
Likes
1
Rating
0
P
PrintablesSTORM DESIGN

Bambu Lab - Donor Spool Frame 2 - Modular Design - For Spools from 0.5kg to 3kg

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Frame 2 - Modular Design” for an amazing project " Filament Spool Switcher & Winder "…

Downloads
4,242
Likes
285
Rating
5
P
PrintablesBONK BOY

MP5 and MP5K for Carbon/Dummy 13 Beta + V1/extra (Foregrip, Skeleton stock, Stock, Drum mag, etc) gun

The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…

Downloads
2,516
Likes
586
Rating
4.86
P
PrintablesSTS_3DP

5kg Spool Holder

Holder for 5kg spools of filament

Downloads
2,458
Likes
59
Rating
4.8
P
PrintablesBlargedy

Pastamatic Filament Spool Winder Modifications: Braces and 5kg Spool Support

Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…

Downloads
2,390
Likes
262
Rating
4.89
P
PrintablesChristian

iMac to 5K Display components

english version see below. ------------------- Einen älteren iMac 27" kann man zu einem wirklich guten 5k Monitor umbauen mit wenig Aufwand! Das Video von Andi zu diesem Thema ist zu finden unter Andi hat den Umbau sehr gut erläutert! Ich…

Downloads
1,589
Likes
51
Rating
5
P
PrintablesJRT3D

Turn PET1 plastic bottles into 3D filament with The Recreator3D.com - MK5KIT: Ender 3. Community Revision 2 STEP File

STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…

Downloads
1,195
Likes
172
Rating
5
P
PrintablesTwotone74

Bambu X1 Carbon / P1P Horizontal Side Spool Holder for 2,5kg+ Spools

English: This Spool Holder was inspired by the Horizontal Side Filament Holder by CdRsKuLL, which was one of the first models I printed on my X1 Carbon. But for the most common filament types I always use big Spools, so I changed the…

Downloads
818
Likes
114
Rating
4.63

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Downloads
799
Likes
66
Rating
4.67
P
PrintablesAyersWV

K2 Spool Holder - 5KG Spool Size

I have enlarged K2 Kevin's Spool Holder for a 5KG Spool. I installed two screws to keep the smooth rods in place from the underside of the side. You may want to pre-dill or use self-tapping screws. Note the Filament guide fits tight, I…

Downloads
780
Likes
75
Rating
4.6
P
Printables3D_CNC

Adjustable Spool Holder .5kg - 2kg spools (fixed screw)

Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…

Downloads
768
Likes
144
Rating
4.97
P
PrintablesLALAG Labs

Load cell HX711 5kg 12.7x80 M4 M5

Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…

Downloads
759
Likes
17
Rating
4
P
PrintablesFilaments.ca

Filaments.ca EconoFil™ MINI Refill Coils 0.5KG Master Spool

Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…

Downloads
733
Likes
78
Rating
4.78
P
PrintablesS3DP

Simple Bench Top or Side Mount Large 5Kg Filament Spool Holder - One Piece 360 Deg Rotation

I found that all the filament holders out there seemed too complicated for what I needed. So, I designed my own. It is super simple and the rolls don't have any issues spinning on it. You can also add a little Kapton tape to the top edge…

Downloads
653
Likes
46
Rating
4.5
P
PrintablesRoland Goller

Kitchen Aid Artisan 5KSM Halterung für Knethaken, Schneebesen etc.

Kitchen Aid Artisan Halterung für Knethaken, Schneebesen etc. Infill 42% Befestigung: 4x35 Panhead Schrauben Wenn dir mein Modell gefällt, würde ich mich über ein Like freuen If you like my model, I would be happy about a Like

Downloads
631
Likes
130
Rating
5
P
Printablesslothstops

Filament Roller for 1kg and 2,5kg spool

You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…

Downloads
617
Likes
55
Rating
5
P
PrintablesGeode

"Bug Lite" - 3D Printed Electric Sailplane (e-DLG / F5K)

Summary "Bug Lite" - 3D printed electric DLG (F5K) with foaming LW-PLA and Carbon Nylon PA-CF filaments for best weight to strength ratio. This release also comes with newly designed skeleton V-tail, integrated electric fuselage, etc.…

Downloads
600
Likes
87
Rating
0
P
Printables3DDIY

Festool Track Saw Kerf Jig for TS75, TS55 and TSC 55K

This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right. Festool saws have different widths so use…

Downloads
571
Likes
102
Rating
4.86
P
PrintablesNoM

5KG Bearing Spool Holder (eSun)

As there doesn't appear to be any spool holders using bearings in this formfactor which fits 5kg eSun branded rolls, I decided to modify a design and add my own touches to make it easy to switch rolls over with just two pieces. Print: 1 x…

Downloads
556
Likes
47
Rating
4.17
P
PrintablesTheKwijibo

Modded Vertical foregrip mp5k style (M-lok)

As requested, a remixed design to allow a better fit with free floating tubes AND scaled up by 110% to allow Magpul M-Lok hardware to fit. Slightly more difficult to print though, but not impossible with the right slicer settings. I ended…

Downloads
544
Likes
57
Rating
0
P
PrintablesCapra-Audio

Qudelix 5K Case

A Case for the Q5K to prevent accidental bumps, scrapes, and button pushes. Printing: -THIS MUST BE PRINTED IN A STIFF MATERIAL SUCH AS ASA, ABS, PLA, or PETG -0.2mm Layer height -Tree supports touching build plate only (There is a 0.2mm…

Downloads
427
Likes
34
Rating
5
P
Printablesmichalgerhat

MP5K style M-LOK grip remix

Originally I was unable to align the front stop of the original grip with the end of my handguard due to the placement of the screw holes. I've added a section with a screw hole to the back so you can have more freedom aligning it on the…

Downloads
419
Likes
97
Rating
0
P
PrintablesBulabula2001

iMac 5K conversion - Holder for SA1-Board

During conversion of my iMac 27" 5K into a stand-alone monitor I stumbled across the parts designed by @ pnwkayaker . Liked the holder for the SA1 board (same as I used in my build) but wanted to use less plastic there. So I trimmed down…

Downloads
399
Likes
9
Rating
0

Polymaker 5kg Spool Roller

Hey all. I wanted to upgrade my spool solution to these large and heavy spools to something with bearings. So, without re-inventing the wheel I sourced the internet for inspiration. I found Polymaker has a model similar to this, but…

Downloads
390
Likes
84
Rating
5
P
PrintablesHydrance

3d Printed RC Car (35kmh+)

MAUAL: https://drive.google.com/file/d/166WgX3s3xaSHoHx7IyyMOEYGDWjkIsPG/view?usp=sharing Parts (some links may be affiliate): https://www.injora.com/products/injora-mb100-r80-esc-and-6ch-transmitter-receiver-for-1-18-1-24-rc-crawlers ?…

Downloads
372
Likes
252
Rating
0
P
PrintablesPeter Mastren

5Kg Spool Roller

Filament spool roller for Zyltech 5kg filament spools. Hardware required : 4 - m3x16 (or longer) bolts 4 - 608 bearings Print tips : 1 - SpoolBase 2 - SpoolFrame 2 - SpoolRoller No supports required but you may want to use a brim for the…

Downloads
362
Likes
34
Rating
5
P
Printables3Dimensions

Lockable Insert for Honeycomb Storage Wall / HSW / Max. Load 15kg

Hang heavy equipment on your Honeycomb Storage Wall with this inserts. The insert can withstand forces up to 15 kg and does not detach from the HSW. I have made two variants, M4 and M5. Update: 04.03.2024 nut M3 added, can only be locked…

Downloads
354
Likes
102
Rating
5
P
PrintablesNindrene

Pastamatic Remix with 1kg and 5kg Spool Holders

Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…

Downloads
346
Likes
24
Rating
5
P
Printablesnnicclaas

5kg Spool Holder 608 bearings adapter

I liked the 5kg Spool Holder by gfursu, but wanted to have an axle riding on 2 608 bearings. So i designed an adapter that fits in the slots for the old axles and can hold an 608 bearing. Lastly i added an axle and an insert for the spool…

Downloads
319
Likes
33
Rating
0
P
PrintablesSaniainen

MP5k M-lok Airsoft Handguard

More general version of my previous design. This SHOULD work with all kinds of airsoft MP5k's, but so far I have tested it only on my JG. Meant to be used with "JG Works Scope Mount For Airsoft Mp5" to make somewhat continuous rail. Try…

Downloads
318
Likes
71
Rating
5
P
Printablesbwalz

Kitchen Aid Pasta Maker 5KSMPRA & 5 Piece Pasta Deluxe Set Stand

This is a stand for the tree pieces of the Kitchen Aid Pasta Maker Set 5KSMPRA. It holds both cutters, the main roller and the cleaning brush. The overall height with the tools inserted is around 26cm. A version for the “Deluxe Set” with…

Downloads
315
Likes
77
Rating
5
P
PrintablesKevDoy

Apple iMac 27" (2014) 5K Monitor Conversion

I converted a 5K iMac (2014) to a monitor. I wanted to use as little glue as possible and wanted the display to remain repairable and modular. LCD Driver Board Mount To mount the LCD driver board, I created this mount that allows you to…

Downloads
296
Likes
38
Rating
0
P
Printablestearandfix

Enclosure for power supply module ZK-5KX

This is a portable power supply based on ZK-5KX buck-boost module from Aliexpress. It can be powered from different sources: XT60 connector usb type-c connector banana plugs It has an integrated clamp for XT60 male connector. Prints…

Downloads
279
Likes
38
Rating
5
P
Printablespnwkayaker

iMac 5K conversion using SA1 board

2026-04-19: Bill of Materials (BOM) Life has pulled me into multiple directions and I finally got time to update this post with a bill of materials (see below). This is the full electronics list and video adapters used. There're 2…

Downloads
278
Likes
14
Rating
0
P
PrintablesTrent

3.5 Inch Hard Drive Tray Caddy 65KHD

The Dell part number 65KHD, a 3.5" hard drive caddy, is compatible with a wide range of Dell PowerEdge servers. Here's a list of known compatible systems: Dell PowerEdge Tower Servers: PowerEdge T30 PowerEdge T40 PowerEdge T130 PowerEdge…

Downloads
276
Likes
13
Rating
0

XXL Spool Holder (5kg & Under)

An oversized spool holder for xxl sized spools. Nothing too fancy. Doesn't feature any type of bearings, or fancy features. I needed a plain and simple spool holder for Polymaker's 5kg abs spools, and threw this design together in F360.…

Downloads
275
Likes
25
Rating
4.5
P
Printablesmrusk

High Performance Spool Holder for Prusa Lack Enclosure (up to 5kg Spools)

These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and…

Downloads
267
Likes
46
Rating
4.75
P
PrintablesSaniainen

MP5K Long M-lok Conversion (AIRSOFT)

[EDIT] There was an error in 229 version, make sure you use fixed version! Conversion for airsoft MP5k. It will make mp5k longer, 229 version is roughly regular MP5 length. Modelled to be used with JG MP5k, but should be usable with other…

Downloads
264
Likes
60
Rating
0
P
Printablesbrnin8r

1:10 scale 25kg cast iron olympic weight plate keychain

A 25kg/45lbs cast iron plate scaled down to make it more portable. Diameter: 45mm Thickness: 3.75mm Weight tolerance: +/-3% For training use.

Downloads
261
Likes
32
Rating
5
P
Printablespastrami4033

5Kg Spool Roller (optimized)

I had a lot of trouble with too much friction with the existing model, and needed to tweak it to prevent my extruder from skipping steps. While doing so, I ended up re-modeling everything from scratch with the existing model as a base.…

Downloads
256
Likes
23
Rating
5
P
PrintablesLedmaster

Adjustable 5kg Spool Holder

This is an adjustable spool holder that I designed for poly maker 5kg rolls, which will probably work on other brands as well. It is adjustable, so you can resize for 3kg and 1 kg rolls as well. The bearings are 608 6-6-2025 Hello, I have…

Downloads
252
Likes
27
Rating
4
P
PrintablesSPEKERDUDE

Large Spool Holder - designed for 30cm diameter (5kg) spool

spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…

Downloads
250
Likes
16
Rating
0
P
PrintablesMarko3D.cz

2,5kg Spool Holder for Original Prusa MK4 & MK3S+

Stáhněte si můj model držáku cívek pro 3D tiskárny Original Prusa MK4 a MK3S+ zdarma. Bez problémů se na něj vejdou cívky s filamentem o průměru až 30 cm a hmotností až 2,5 kg.

Downloads
250
Likes
22
Rating
4.5
P
PrintablesMaverick0197

MP.5K ForeGrips

---Title: MP.5K ForeGrips ---Description: Introducing my non-vintage MP.5K ForeGrips. Based on the 1976 MP5K prototype by H&K. I realize I am not the first to replicate this grip so I decided to give it a couple twists. ---Updates: V1…

Downloads
247
Likes
48
Rating
0
P
Printablesroads

iMac to 5K Display holder

Thanks for the awesome idea to Christian for these. Printed in ABS, step files provided as usual

Downloads
244
Likes
13
Rating
0
P
PrintablesSirPrintsALot

DIY 5K Monitor v2

I really wanted a 5K monitor but didn't want to pay for a really expensive Apple monitor or the LG Ultrafine display. Besides the cost, they also only have Thunderbolt ports and I wanted the option to use HDMI and regular DisplayPort…

Downloads
240
Likes
23
Rating
0
P
PrintablesLeafyon

MP5k Front Sight for Galaxy/Tokyo Marui/CYMA

Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…

Downloads
234
Likes
16
Rating
0
P
PrintablesPolymaker

Polymaker 5kg Spool Holder

Polymaker 5kg Spool Holder designed and printed by Dennis from Toronto Hardware required: - 4x 3Mm hex nuts - 4x 25mm 3mm bolts - 8 bearings 1/2” with 1/4” ID Bushing goes on bolt side on axel. Axels printed at 40% Rollers two piece. Line…

Downloads
227
Likes
48
Rating
2.33
P
PrintablesLuis Bendix

iMac 5k Switch Panel Holder for External Display

This holder is designed for converting a 5k iMac into an external display by securely mounting the monitor control buttons, which can be accessed through the RAM compartment. It provides a robust and easily operable solution while…

Downloads
221
Likes
14
Rating
5
P
PrintablesgalaxyCr8r

5K Vertical Grip for Picatinny Rails

Wanted a vertical grip for a custom Nerf blaster attachment. So I made this. Features two holes for M4 screws AND two 1.75mm filament pins! Includes a 3D printable m4 codder pin so truely, no extra hardware required! Completed prints…

Downloads
217
Likes
48
Rating
5
P
PrintablesXboxHacker

Pastamatic Remix: 5Kg to 5Kg Spool Winder

This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…

Downloads
216
Likes
21
Rating
0

Sunlu 5kg spool holder adapter

I was in need of a 5kg spool holder and found the Polymaker 5kg spool holder by UB3D here on Printables. After making it I quickly discovered that the spool holder shaft was too narrow for the Sunlu spool, causing the spool to drag on the…

Downloads
212
Likes
28
Rating
4
P
PrintablesCluadius

Ambrosia Filament 5KG Spool Holder

I jumped on the 5kg spools from ambrosia as soon as I saw them, love not changing spools but figured I should print a legit spool holder after limping along the first roll. Super simple print, I used ABS but anything should work fine.…

Downloads
207
Likes
9
Rating
4.33
P
Printablesgapsed!

SUNLU 5kg Spool Holder

Finally I added some rubber pads 15x2mm: https://s.click.aliexpress.com/e/_omEYj6G (Affiliate Link)

Downloads
204
Likes
23
Rating
5
P
Printablesvorby

5kg Spool Holder (Printed)

Quick and all printed, stand for 5kg filament spool Designed for spool with 40mm diameter center hole Printed: Prusa XL 0.6mm nozzle, 0.25 layers

Downloads
196
Likes
8
Rating
0
P
PrintablesRobert89

5kg wall & roof filament holder

I have designed this wall and roof filament holder, mainly for Esun PLA 5KG spools, but it can be used with 1KG spools with other adapters. Up to you if you want to change over the bearings or buy another set. The hole through the holder…

Downloads
188
Likes
18
Rating
0
P

iPhone Continuity Camera (Webcam) Mount - LG Ultrafine 5K 27"

This is a mount to attach your iPhone to the top of an LG Ultrafine 5K 27" display for use with Continuity Camera

Downloads
184
Likes
12
Rating
0
P
PrintablesBumbleGoatDk

Fiberlogy 2.5KG-Spool Holder (MK3/MK4)

I spool holder designed for 2.5KG fiberlogy spools. 110mm between each side.

Downloads
183
Likes
10
Rating
5
P
Printablessstteevvee

AC drain hose adapter for Daikin RZQ125KCV4A air conditioner outdoor unit

Allows you to use a standard garden hose to drain water from your Daikin AC outdoor unit. Designed for the RZQ125KCV4A model, but will likely fit others as well. Print with a sturdy filament if you can, otherwise it can be a bit delicate.…

Downloads
183
Likes
15
Rating
5
P
PrintablesStefano.3D

Vespa Keychain 125KHz RFID Tag

https://vespa-riviera.ch/ Vespa Keychain RFID Printed Prusa MK3S MMU2 0.30 mm https://www.wish.com/product/594b8c29d791a240b572fed5 125KHz RFID Tag 5pcs, 2.- Swiss Francs (CHF) Print instructions Category: Vehicles Summary…

Downloads
179
Likes
25
Rating
0
P
PrintablesLišák

Parkside X20V - ZK-5KX power supply

Parkside Team X20V battery socket with ZK-5KX - CC CV 0.6-36V 5A boost converter, QC4.0 USB A/C charger and XT60 battery socket. USB charger and XT60 socket case is optional. Used boost converter:…

Downloads
178
Likes
30
Rating
0
P
PrintablesTJzDesign

Adjustable Spool Rollers (.5kg - 5kg)

After not finding a great spool roller that would fit a variety of spool sizes, I decided to come up with my own. After a few ideas and a couple iterations, I came up with this one! It works with spools from 100mm diameter to 300 mm…

Downloads
178
Likes
21
Rating
4.67
P
PrintablesgalaxyCr8r

Gryphon MP5K Add-ons

Ever wanted a MP5K but want it to sling foam? Now you can! Included is a top MP5-esqe compartment that fits a very very slim battery that you'll probably have to build yourself and an included stock cap. An optional closed compartment…

Downloads
168
Likes
66
Rating
4.5
P
PrintablesSWbAC

5KG Spool Holder

Meet the upgraded 5KG Spool Holder, E ngineered to handle heavy-duty filament spools with confidence. Designed with a reinforced base and side walls, this holder is optimized for smooth feeding and long-term durability. Perfect for large…

Downloads
167
Likes
8
Rating
0
P
PrintablesMCB Designs

Filament Spool Roller v2 (5kg, 3kg and 1kg)

Design Concept The 5kg Filament Spool Roller is designed to facilitate smooth unspooling of filament during 3D printing. Its simple yet effective design aims to minimize tangling and maximize efficiency. Use This roller is ideal for…

Downloads
167
Likes
18
Rating
5
P
PrintablesPrusaPilot

Best 3.5kg Spool Holder

Finally, a good 3.5kg spool holder! I like to print big, and a lot, so I use 3.5kg spools with a reverse bowden tube to my printer. I could not find a decent spool holder setup for these massive spools that didn't cause print quality…

Downloads
167
Likes
17
Rating
5
P
PrintablesSaniainen

MP5k m4 stock adapter V2

New version of m4 stock adapter for mp5k. This is at least compatible with JG MP5k. If you have problems with fitting, you can contact me and propose changes. CleanAndThin is MP5k part only. [edit 22.4.2020] made M4deansV2, it has bigger…

Downloads
166
Likes
16
Rating
0
P
PrintablesVAROE

Filament Spool Wall Mount/Rack 2.5kg - VAROE

This model needs to be used with dowels. The holes of the mount are having 23mm diameter and should fit 22mm of (wooden) dowels (like in my case). If there are any troubles i've uploaded the cad model for adjustments. If there are a lot…

Downloads
166
Likes
31
Rating
0
P
Printablesbbrendon

Spool Holder - any size (5kg, 2kg, 1kg, etc)

This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…

Downloads
164
Likes
20
Rating
5
P
PrintablesUntangleWORKS

FGC-9 MP5K barrel retainer mod

a small mod to the barrel retainer. to protect your hands from slipping of. Update_ ** ____ ** 11-5-2020 in file errors should be fixed. Category: Sport & Outdoors

Downloads
153
Likes
6
Rating
0
P
PrintablesJürgen Weigert

Filament Spool stand 5kg

For casual use, 1kg spools are nice. i still use my old https://www.thingiverse.com/thing:1533722 or https://www.thingiverse.com/thing:1864589 spool holder designs for those. But when you do heavy duty 24h faceshield printing (or…

Downloads
145
Likes
15
Rating
0
P
PrintablesJwidess

Cat RFID Tag Keyfob Case Keychain - 25mm 125kHz

Cat Shaped RFID Tag Keyfob Case Keychain - 25mm 125kHz This is a simple model I made for attaching a 25mm adhesive-backed RFID tag to a key chain. I used these T5577 125kHz tags from AliExpress and configured them with a Proxmark3 Easy…

Downloads
144
Likes
25
Rating
5
P
PrintablesTheCafeRacer

MP5/MP5K GRIP PLUG (SEF NAVY / AMBI / ZENITH HOUSINGS)

Grip plug for you MP5/MP5K Navy Grip. Either blank or with locking peice holder. Requires $5 grip plug spring from HK Parts: https://hkparts.net/product/grip-cap-replacement-spring-p16408.htm/

Downloads
135
Likes
12
Rating
0
P
PrintablesJRT3D

Recreator 3D - MK5Kit : Ender3 Geared Motor Gear

This is a gear mod for The Recreator 3D - MK5Kit : Ender 3 Geared Motor Gear. If your Nema17 Extruder for motor has an attached gear, this will slip fit over it. It's snug, so just push it on with force by pressing it down onto a table top.

Downloads
135
Likes
16
Rating
5
P
Printablesmarber

Sony RMF-TX900U Voice Remote Control flexible TPU case (Sony A95K)

I love my new TV. Unfortunately, my kids love it too. The nice remote that comes with it, has been played with and dropped on the floor already a few too many times. So I decided to design and print a case for it. This is a flexible case…

Downloads
134
Likes
12
Rating
0
P
PrintablesSaniainen

JG MP5k M-LOK Conversion

[edit 29.1.2021] Released SimplerHandguard, version of handguard with less Mlok holes, it's simpler to print and more durable. First of all, this is for JG MP5k's only, the one with two piece metal receiver. This is replacement for top…

Downloads
128
Likes
18
Rating
0
P
PrintablesFipsthedog

Low profile quick-swap Spool roller holder; Also for wide rolls of filament 2.5kg

I was annoyed of my current spool holder, as I had to adjust it to fit filament rolls of different widths. With this design I can just put a roll on it and swap them easily. The design requires: 4 M6 Screws 4 606ZZ bearings The bearings…

Downloads
125
Likes
13
Rating
4.5
P
PrintablesGoldenBoyGarage

Vevor Diesel Heater Feet Stand Platform 5kw 8kw

About It gets pretty cold where I live and the heater I bought wasnt cutting it. Everyone has one of these diesel heaters according to youtube, so I decided to try one. The intake and exhaust come out of the bottom and if you dont put it…

Downloads
123
Likes
17
Rating
0
P
PrintablesDoak

PolyBox II Extension for 2.5kg spool

Raises the top of the PolyBox to fit 2.5kg, 30cm filament spools.

Downloads
122
Likes
10
Rating
4.5
P
PrintablesSpencer1990

5KG Spool Holder

I got tired of switching spools out on bigger prints and made a basic spool holder for the 5kg polymaker spool. I made the original out of petg but I'm making the next one out of abs. It is working well and I have included the STEP file…

Downloads
121
Likes
27
Rating
0
P
PrintablesStadi

25km Schild Traktor

Da es diese Schilder mit dem km Zusatz nicht mehr gibt habe ich dieses selber gedruckt. Ich habe es mit Filamentwechsel gedruckt, man kann aber auch weiß drucken und die Schrift dann schwarz machen. Print Settings Printer Brand: Anycubic…

Downloads
120
Likes
5
Rating
0
P
PrintablesSirPrintsALot

5K Monitor with Keyhole Backplate

This is the 3rd version of a DIY 5K monitor build I've been working on. See v2 here . I wanted a good 5K monitor but didn't want to spend $1600 on an Apple Studio Display or $1300 on an LG Ultrafine. It turns out they use basically the…

Downloads
119
Likes
20
Rating
0
P
Printablesdorsai3d

Pastamatic 5kg lightweight upgrade

A few modifications to allow the Pastamatic to be used for 1kg and 5kg spools. I raised the height of the source spool by 35mm with a wider smooth bracket riser, but it fits in the same area. The crossbars, target spool female threaded…

Downloads
118
Likes
12
Rating
0
P
PrintablesYoz

Qudelix-5K Desk Mount

Mount I made for a Qudelix-5K for mounting on the underside of a desk, it mounts very snug so I would suggest disabling buttons as it may hit them when inserting. I have since added a wider model as the tolerances are quite tight. Should…

Downloads
116
Likes
20
Rating
5
P
PrintablesDanV

Zyltech 5KG spool holder for Prusa XL

Spool holder for 5kg spools of filament from Zyltech. May also fit 5kg or 3kg spools from other vendors. Print on the flared knob end with a brim. I used PLA and it's fine, but may be printed with PETG if so desired. After printing,…

Downloads
115
Likes
7
Rating
0
P
PrintablesMartin Reichert

Begadi/5ku B11 Spacer for E&L AKSU

As a Airsoft club we got us some E&L AKsu's and ordert for them B11 Rail mounts made by Begadi/5ku… the problem is that there is a 4mm gab between the Body and the B11 so I made a Spacer to fil the gap... what we saw was that each replica…

Downloads
110
Likes
8
Rating
0
P
PrintablesBdaboy

5kg spool roller

There are two roller versions. V2 has a flair on the roller to prevent spool from rubbing on sides. Both can be printed vertically without any supports and was designed for standard 608 bearings. Add bearings into both rollers then place…

Downloads
103
Likes
9
Rating
5
P
PrintablesHannibal

DIY iMac Late 2014 5K monitor kit for R1811 driver board

To convert my iMac Late 5K 2014 into a 5K monitor I used a Stonetasking R1811 driver board. Most of instructions here can be applied to other iMacs and other driver boards as well. Note, that my particular iMac is one with a factory VESA…

Downloads
102
Likes
10
Rating
0
P
PrintablesSB

Filament-Rollen-Halter 0,25-5kg - neue Schwerlastversion V5

Filament-Rollen-Halter 0,25-5kg - neue Schwerlastversion Version05: Endlich habe ich Zeit für den Abstandshalter gefunden. Ihr stellt die Rollenhalter einfach darauf und schon ist die ganze Sache sehr stabil. Wenn der Abstandshalter…

Downloads
100
Likes
10
Rating
5

Spool Holder 2020 2.5kg

Remixed for use with 2020 extrusions and 2 mounting points for m5 + t-nut and made cap mountable with m5 as well.

Downloads
99
Likes
5
Rating
0
P
PrintablesSteve Oliver

Foxalien - Masuter Pro - 20w (5w) Quick fit / remove Laser mount - Vevor 1.5kw Spindle

A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…

Downloads
98
Likes
14
Rating
0