Search results: brake

Sort order

1,764 models

Disc Brake Coaster Set

A simple Coaster set design for the automotive fans out there Bolts are printed separately and glued in place Supports shouldn't be necessary For the Disc, i find Prusaslicer or Superslicer does monotonic top ordering better than Cura to…

Downloads
4,903
Likes
1,328
Rating
4.9
P
PrintablesTizian Deneke

Sim Racing Handbrake V2

This is the second Version of the Sim Racing Handbrake. It uses less screws and should be easier to assemble. The Base and two side panels are now one piece for easier assembly. It may not be as good looking and reliable as the first one…

Downloads
1,262
Likes
221
Rating
4.5
P
PrintablesSarusani

Hydraulic Disc Brake Alignment Tools

Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…

Downloads
1,068
Likes
156
Rating
5
P
PrintablesTizian Deneke

Sim Racing Handbrake V1

All the files that are required are downloadable and ready to print I made adjustments how the parts are printed and don't need to be changed but you can still change them if you want to use less filament. Also when assembling use…

Downloads
968
Likes
154
Rating
5
P
Printablesbjamdesign

Bike - Brake Cable to Shift Cable Clip - Flat Front

A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free. Flat front design solves the problem where cables may pull away from each other ( see this design ). Also, its a…

Downloads
934
Likes
162
Rating
5
P
PrintablesThebigfoot

Shimano XT 4 pistons brake bleed block 21 holes

Since was almost impossible to find a bleed block for my Shimano brakes I've checked the measurements of the original one and printed it. Works great! Print and check thickness should be between 10 and 10.2mm to get regular bleeding of…

Downloads
841
Likes
47
Rating
5
P
PrintablesjonnieZG

M4 Flash Hider / Muzzle Brake (M4QD)

A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…

Downloads
743
Likes
83
Rating
5
P
PrintablesDavid Kingsman

Brake Disc Clock

Perfect gift for anyone who loves bikes or brake discs. Just print the clock, put a standard clockwork in it and hang it on your wall. Print instructions Category: Decor Summary Perfect gift for anyone who loves bikes or brake discs. Just…

Downloads
266
Likes
56
Rating
0
P
Printables365lyf

Thrustmaster TSS Handbrake Shifter - 160mm Aluminium Profile Mount -V3

After exhaustive testing, a very solid mount for the Thrustmaster Sparco TSS Handbrake to suit 160mm Aluminium Profile Rig. I wanted something that could stand up to the abuse of hard shifting, and think I've now settled on a solution.…

Downloads
172
Likes
25
Rating
5
P
Printablesgerda

Griff für Handbremse Wohnwagen Dethleffs handbrake handle caravan

nach konstruierter Griff für Handbremse für älteren Dethleffs Wohnwagen. der originale griff hat sich aufgelöst und zerbröselt. Im Netz habe ich nichts gefunden, also habe ich die noch vorhandenen Fragmente mit 123D design zu einem neuen…

Downloads
161
Likes
16
Rating
0
P
PrintablesAinon3Dtisk

Brake for swivel chair - won't move

Hello, I have a brake for a swivel chair for you - it won't move . It's for a swivel chair for the office or living room. It's for a wheel size of 60x60mm, so you can enlarge / reduce it as needed. Suitable for a racing simulator or a…

Downloads
158
Likes
72
Rating
5
P
Printablesm3dee

Bleeding Syringe Holder for Disc Brake Bikes

Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…

Downloads
134
Likes
18
Rating
0
P
PrintablesIvaylo

Ebike, hydraulic brakes, magnet holder

I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…

Downloads
105
Likes
13
Rating
0
P
Printablesfaultedlogic

Skull & Crossed Wrenches Fan Grill for Satsana Fan Duct 40mm Heatbrake Fan

I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…

Downloads
103
Likes
10
Rating
0
P
PrintablesMax385

Porsche Brake Disc Bookend

I made a Porsche 911 Brake disc bookend for my books and thought i could share it with the community. I personally think its a must have for a car enthusiast or for Porsche enthusiast. The brake disk is positioned using 3 pins and if…

Downloads
85
Likes
22
Rating
0
P
Printableswizhack

Bafang bbshd brake sensor mount tektro auriga comp

FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…

Downloads
63
Likes
5
Rating
0
P
PrintablesMarkus

3rd brake light for Opel Rocks-E

As it says in the title - a third brake light for an Opel Rocks-E (or probably also Citroen Ami). Well, the plastic parts for it. In addition to the plastic parts, you'll need: a brake light (duh!). I used (and designed the holder) for a…

Downloads
62
Likes
8
Rating
5
P
PrintablesFloatingCam

5KG Bearing Spool Holder with Brake

The 5K Bearing Spool Holder seemed like the quickest solution that fit my environment. However, the spool was free to spin and quickly created a tangled mess. I looked for any solution that would address ‘the spin’ but couldn't find…

Downloads
39
Likes
4
Rating
0
P

Drilled brake disc 1:10

1:10 drilled brakes for any car

Downloads
34
Likes
11
Rating
0
P
Printablesjamesbaillies

Losmandy Plate Brake

I could have used bolts to achieve the same function but metal bolts would mar the finish of my telescope mount. So I designed a plastic brake to prevent the telescope from sliding off the mount if the mount clamps are not tight enough.…

Downloads
34
Likes
2
Rating
0
P
PrintablesCurtiss

Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT

Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT Nejlepší tisk s filamentem TPU 95A 1 kg Black / Best print with TPU 95A 1 kg Black filament

Downloads
31
Likes
0
Rating
0
P

RC drilled brake disc hexagon 1:10

RC brake disc hexagon 1:10

Downloads
29
Likes
6
Rating
0
P
Printablesemberambr

Porsche Macan Brake Caliper Cylinder Plug

My friend and I designed this after I painted my Macan calipers red to go on my mk7 GTI and had to basically avoid the area around the cylinders for fear of getting paint into them. They're designed around the width of electrical tape;…

Downloads
24
Likes
2
Rating
0
P
PrintablesSonorrow

JD Bug scooter brake spring replacement / náhrada pružiny brzdy koloběžky JD Bug

CZ: Náhrada prasklé pružiny brzdy skládací koloběžky JD Bug Deluxe. Po vytištění zasuňte částí s opěrou (širší část ukončující rameno se 2 výstupky) dovnitř do koloběžky, na tenké rameno nasuňte blatníkovou brzdu a propojte původním…

Downloads
15
Likes
0
Rating
0
P
PrintablesHeuvelmaarten

Fog or brake light frame

he rear fog light I bought is from the following site: https://www.aliexpress.us/item/3256803671534942.html?spm=a2g0o.order_list.order_list_main.49.28931802LvjGZ9&gatewayAdapt=glo2usa The original model had no holes for the attachment of…

Downloads
13
Likes
3
Rating
0
P
PrintablesL7899

Slider for Mopar 3748 429, Parking brake vacuum release valve

Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…

Downloads
12
Likes
1
Rating
0
P
PrintablesHades

brzda na kočárek, ozubené kolo, brake, gear wheel, stroller

materiál ASA,ABS,PETG, PA……dle libosti :-) 3 perimetry , 25% výplň po vytisknutí je model lehce smrsknutý, zaleží na zvolení materiálu, ( můj případ z ASA )při nasazování na hřídel jsem použil horkovzdušnou pistol, Nahrál jsem model a…

Downloads
4
Likes
0
Rating
0
P
PrintablesJerryie

Rotating brake disc keychain

Gently snap the caliper onto the disc.

Downloads
7,159
Likes
1,863
Rating
4.91
P
PrintablesJerryie

Rotating brake disc keychain V2

Improved version of my brake disc keychain, featuring enhanced fit and refined details for a more realistic look. Use a small amount of force to snap it into place.

Downloads
4,525
Likes
1,127
Rating
5
P
PrintablesUkrutony

Bike disc brake spacer

Hello, I know you have been given disc brake spacers with your new bike and I also know that you have lost them. So have I :) But no worries. They are easy to print :) This simple spacer should work with both Shimano/SRAM (Avid in my…

Downloads
4,326
Likes
478
Rating
4.94
P
PrintablesSTORM DESIGN

Spool Brake for Bambu Lab Filament Spool Switcher & Donor Spool Frame 2 - Modular Design

This is a Remix “Spool Brake” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW…

Downloads
3,544
Likes
294
Rating
4.92

Coaster Brakes Kit

Coaster set with brake caliper and disc aesthetics. The kit consists of 4 coaster discs and a holder shaped like a calip

Downloads
2,883
Likes
1,218
Rating
4.88
P
Printablescmh

Bicycle disc brake caliper piston spreader

Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…

Downloads
2,557
Likes
277
Rating
5
P
Printablesaiber

Shimano Disc Brake Pad Spacer

Spacer since you shouldn't squeeze a hydraulic brake without having anything between the pads. This is bad for your brakes. How I Designed This Came with my disc brakes, nestled between the pads in the caliper. I made a high resolution…

Downloads
2,546
Likes
164
Rating
4.95
P
PrintablesSpicyTuna812

Brembo brake disk and caliper - CHECK NEW DESIGN IN DESCRIPTION

NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…

Downloads
2,472
Likes
182
Rating
5
P
PrintablesFelix

MTB Brake/Shift Cable Clip

Cable Clip for shift- and brake cable: 4mm diameter for shift cable 5mm diameter for brake line There are 2 version: shift cable to brake line shift cable to shift cable

Downloads
2,423
Likes
412
Rating
4.85
P
Printablesplasmata

Shimano Brake Bleed Block

The neighbor found out I have a 3D printer and asked if I could design him a brake block to do maintenance on his bike.

Downloads
2,106
Likes
135
Rating
4.95
P
PrintablesKR Design

bmw e36 fog light brake duct

CZ: Pre lavú stranu použite možnosť zrkladit model EN: For left side use mirror part. EN: bmw e36 fog light brake duct output diameter 70mm CZ: bmw e36 prívod studenýho vzduchu k brzdám Priemer výstupu 70mm

Downloads
1,635
Likes
148
Rating
0
P
PrintablesKN16

M-LOK Rail Covers and Matching Handbrakes

Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…

Downloads
1,370
Likes
428
Rating
4.83
P
PrintablesRaulito3D

Brembo Racing Brakes extruder visualizer

Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…

Downloads
1,363
Likes
870
Rating
4.8
P
PrintablesDonKeulito

T-LCM Brake Pedal Mod - Thrustmaster Loadcell

Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…

Downloads
1,204
Likes
99
Rating
5
P
Printablescmh

Shimano disc brake piston exposure tool

Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…

Downloads
1,135
Likes
152
Rating
5
P
Printablesntressler7

SRAM Large Bleed Block - For SRAM Code Brakes

This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…

Downloads
1,104
Likes
50
Rating
5
P
PrintablesBasti

BMW M Brake Disc Lamp

Hier habe ich eine beleuchtete BMW M Bremsscheibe konstruiert, welche bei angeschaltenen LEDs so aussieht als würde sie glühen. Ich habe diee Maße so angepasst, dass die unten aufgeführten elektronischen Bauteile eingebaut werden können.…

Downloads
1,102
Likes
369
Rating
5

Logitech G29 G920 Brake Pedal Damper Mod

You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…

Downloads
1,062
Likes
137
Rating
5
P
Printablespblas38

BRAKE PEDAL STOPPER PAD

The brake pedal stopper pad may deteriorate over time, allowing the stop lamp switch plunger to remain extended when the brake pedal is released. A deteriorated pad can result in the continuous illumination of the stop lamps. In order to…

Downloads
1,028
Likes
32
Rating
5
P
PrintablesJames

Handbrake MINI MLOK Handstop Kung Fu stipple

For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3

Downloads
1,013
Likes
111
Rating
5
P
PrintablesMarkus S.

Shimano Brake Bleed Funnel

This is a perfectly working version of the bleed cup for Shimano hydraulic MTB brakes. It has the right M5 thread and is a bit bigger than the original, which makes it less likely to overflow. Put some rubber O-rings on the cup and the…

Downloads
967
Likes
92
Rating
4.5
P
PrintablesLuBi Tech

M5 Bleeding Funnel for Shimano Hydraulic Brakes

A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…

Downloads
841
Likes
101
Rating
5
P
Printablesmikeev

Simagic P-HPR Adapters for Heusinkveld Sprint Pedals (Accelerator, Brake, Clutch)

Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…

Downloads
809
Likes
40
Rating
5
P
PrintablesMike L

Shimano 4 piston brake caliper pad spacer

Pad spacer for 4 piston shimano brake calipers. The pad spacer for disc brakes is an indispensable tool for transporting a bike without wheels. Once inserted, the spacer prevents the pistons from extending when unintentionally using the…

Downloads
805
Likes
59
Rating
5
P
PrintablesMaciey

Shimano brake hose tool

A tool for installing a Shimano brake barb. You will need M4 and M5 bolts and also M4 and M5 square nuts. Nuts need to be placed during printing

Downloads
804
Likes
154
Rating
5
P
PrintablesJan Franzke

PET Bottle Brake Bleeder

PET Bottle Cap Adapter to build a brake bleeder as seen on ChrisFix . Prints without supports in under 30 minutes. This is ONLY meant to prevent the tube from sliding in and out of the bottle, not as spill prevention. The cap does not…

Downloads
790
Likes
208
Rating
5
P
Printablessoloster

Hydraulic brake caliper tool

This brake tool is easy to use. This brake tool is an essential tool for any bike owner or mechanic. A brake tool suitable for bike hydraulic disc brake calipers, which can compress your piston within seconds when replaced. It is designed…

Downloads
786
Likes
156
Rating
4

Airbus A320 Parking Brake Handle

Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…

Downloads
764
Likes
47
Rating
5
P
Printablesrsilvers

Shimano CenterLock Disc Brake Tool

For torquing in certain Shimano CenterLock Disc brake retainer caps. Category: Tools

Downloads
752
Likes
93
Rating
4.6
P
Printablescmh

Remix of UCI brake lever inclination tool

Check the brake lever inclination on a road bike that may be subject to the UCI's recent rules. Based on the official UCI version, modified for faster and easier printing with less waste. Information on the UCI original at the bottom of…

Downloads
745
Likes
50
Rating
5
P
Printablestonpa888

Magura Brake Transport Tool

This is a Magura plastic clip for transporting your mountain bike with the wheels off. All dimensions and measurements were carefully taken from an original Magura pad spacer. Print with supports with the flat side facing down and the…

Downloads
713
Likes
67
Rating
4.5

Airbus A320 Parking Brake Lift and Turn Mechanism

Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…

Downloads
681
Likes
64
Rating
5
P
Printablesmilspecmoehring

Barrett Style Muzzle Brake for 14mm CCW

Airsoft muzzle brake inspired by the distinctive muzzle device used on the infamous Barrett anti-material rifles. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 100% Infill 0.1mm Layer Height…

Downloads
675
Likes
67
Rating
4.5
P
PrintablesDonKeulito

SHH Shifter (+ opt. Handbrake) Mount - Playseat Challenge

This is an extremely sturdy and flex-free SHH Shifter and/or Handbrake mount for the Playseat Challenge, based on the TH8A mount from floano: https://www.thingiverse.com/thing:3325124 Customized to hold the SHH Shifter and/or a handbrake…

Downloads
670
Likes
73
Rating
0
P
PrintablesSphaeroX

SRAM Brake Disc

Just print with support Category: Tools

Downloads
658
Likes
66
Rating
5
P
Printablesmj

Brake Elastomer for Fanatec CSL Loadcell Pedals

As I've not liked the short travel of the brake pedal, I've created an elastomer replacement. I've printed it in different hardness TPUs with 4 perimeters and different infills with a 0.4mm nozzle and replaced two of the original…

Downloads
649
Likes
68
Rating
5
P
PrintablesJJ

Logitech G27 / G29 hidden sequential and/or handbrake mod

I drew some inspiration from some other designs on here to make a completely hidden sequential mod for the Logitech G27 shifter. The bracket goes underneath the shifter boot and you use an elastic band (or multiple) to make the shifter…

Downloads
639
Likes
76
Rating
5
P
PrintablesNusNus

Shimano brake bleed kit cup

This is the cup needed when bleeding Shimano hydraulic bike brakes. The thread might not be the right one. Otherwise the cup is very close to the original one. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter…

Downloads
589
Likes
44
Rating
5
P

Brake Caliper Keychain

OTHER CREATIONS: GEARSHIFT KEYCHAIN V2 - [ FREE DOWNLOAD ] PATREON : [ Follow me on patreon for free access to our 3d models library and exclusive content!! ]

Downloads
578
Likes
169
Rating
5
P
PrintablesArtemix

Stand brake disc lamp-Inspired by Honda Type R

For more exclusive esigns or If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 Stand Brake Disc Lamp – Honda Type R This is a decorative stand lamp inspired by the iconic brake disc…

Downloads
551
Likes
281
Rating
0
P
PrintablesJoon Chor

Shimano Bike Hydraulic Disk Brake Caliper Spacer Block (with bigger end loop)

I have a roof rack with a thru-axle mount, so the bike rides at the top of my car with the front wheel removed. I've added a simple loop to the end of this brake caliper spacer, so that I can thread a rubber band through and wrap it…

Downloads
549
Likes
46
Rating
5
P
Printablesjeremoche

0$* handbrake for sim racing

After testing a moza HB at a friend's house, I needed to make one for myself so I began working on this model. This HB is especially great if you already changed your logitech brake pedal spring and kept the old one. Otherwise, you'll…

Downloads
549
Likes
103
Rating
5
P
PrintablesSimon

Shimano brake hose tool with Hex Nuts

haven't got any square nuts so modded to using standard hex nuts

Downloads
544
Likes
79
Rating
3.5
P
PrintablesDanB

Air Rifle Moderator / Muzzle Brake

This is a air rifle moderator / muzzle brake for .22 and .177 cal. Has ½ x 20 threads to thread on to the barrel.

Downloads
542
Likes
55
Rating
0
P
PrintablesTim B

Ford Focus brake fluid funnel

This is a funnel I created for topping off the brake fluid level for my '15 Ford Focus. Like many cars made now, the brake fluid reservoir is actually recessed under a cowl. I wanted a simple way of topping off the brake fluid level while…

Downloads
532
Likes
117
Rating
4.5
P
PrintablesEmbrace Making

Brake and Bearing Hub Model (1:1 Scale) With LEDs!

A 1:1 scale model of a vehicle brake caliper, two piece rotor, bearing hub and spindle. Uses real tapered roller wheel bearings so the rotor spins freely! Mounted on stand legs to make a very nice desk model or even an educational tool to…

Downloads
524
Likes
313
Rating
0
P
PrintablesMarkus Skjot

Motorcycle parking brake

A handy tool to secure the brake handle of your bike in braking position. Printed in PETG with layer height 0.2mm, other filaments should work just fine.

Downloads
524
Likes
100
Rating
4.5
P
PrintablesArtemix

Stand Brake Disc Lamp V2 – Bmw M

Want to sell physical prints of this model? Get a commercial license by joining my Patreon: https://www.patreon.com/c/Artemix796 I’ve completely reworked and upgraded the design to make it more realistic, faster to print, and much easier…

Downloads
511
Likes
297
Rating
0
P
PrintablesMagnusT

Brake Cooling Scoop for BMW M2 - ver. 2

New updated version with larger air intake. Now supports both 18" and 19" wheels and also both the original smaller brake calipers and the larger brake kit (see note below). For 60mm hose (inner diameter) PRINTING: Can be printed without…

Downloads
509
Likes
54
Rating
0
P
PrintablesGamerMechanic81

Brake Pad Wear Gauge Set (100% 3D printable)

As a mechanic i am checking customers brakes on a daily basis. I have used a metal version of this tool for years and I paid $15-$20 for it. It's a useful way to measure how much a brake pad is worn down and communicate it to the…

Downloads
504
Likes
56
Rating
5
P
PrintablesRocKz

Fanatec CSL & CSL Elite Pedal Loadcell Brake mod

My mod is greatly inspired by some commercially available one but I've modeled it myself from the ground up and took the liberty of adjusting it to my liking. This mod will make the braking more linear and less stiff overall which is what…

Downloads
498
Likes
60
Rating
5
P
PrintablesAlejandro

Paracord Brake

With this model you can adjust, loosen and lock paracord-type ropes or other types of ropes. By performing a simple movement the rope is released, and in the opposite direction it is tightened. I have also created a variation of the model…

Downloads
498
Likes
209
Rating
4.4
P
PrintablesRBN Prints

Brake disk coaster

This coaster is made to look like a brake disk, so it’s perfect if you’re into cars or just want something different on your desk. It’s got the classic ventilated disk style with holes and a bold red holder that makes it stand out. It’s…

Downloads
496
Likes
259
Rating
4
P
Printablesfholgado

Fanatec Clubsport v3 Pedal Clutch delete and brake reposition spacers

Overview I've struggled with knee pain while sim racing on my Fanatec Clubsport V3 pedals due to the brake pedal placement. Some folks have successfully swapped the brake and clutch pedals to help with this, but I think this is a sub-par…

Downloads
495
Likes
25
Rating
0
P
PrintablesMarius

Motocross / Enduro Brakeline guide

I needed a better break line guide for my KTM 690 Rally Fairing Kit. But it should fit every normal enduro / motocross fork. Design to print in TPU.

Downloads
495
Likes
59
Rating
0
P
Printablesbiketiger

MOUNTAIN BIKE 4-PISTON DISC BRAKE PISTON SERVICE BLOCK

Piston block for servicing hydraulic, 4-piston brake calipers Remove brake pads and push pistons back into bore. Insert this block and pump the brake to push out a single piston for cleaning. Designed around Shimano calipers, but I have…

Downloads
493
Likes
26
Rating
5
P
PrintablesSpicyTuna812

Brembo Brake Disc V2

This is the V2 of my early Brembo Brake Disc and caliper! You can find the old one here I haven't tried to print it yet but thanks to the suggestion of https://www.thingiverse.com/OvrKll it could be possible. I'm working on the caliper…

Downloads
491
Likes
59
Rating
5
P
PrintablesJohan Løvold

BMW R1200GS brake-fluid funnel for servo

I required a tool to help flush the brake-fluid in my 2005 BMW R1200GS, without introducing air into the servo-assisted circuits. And I did not want to spend lots of money and time waiting for it to arrive. As far as I know, this funnel…

Downloads
489
Likes
33
Rating
5
P
PrintablesSilvano

Speedline wheel + brake vent for RC 1/5 (Lancia Delta wheel)

The model is for RC car scale 1/5. It is a copy of the original Speedline Montecarlo with brake vent. There are two files for the brake vent: SINGLE SOLID: it is the model for the printer with one extruder (one color); DOUBLE SOLID: it is…

Downloads
480
Likes
38
Rating
5
P
PrintablesDanB

Moderator/Muzzle Brake for T200 Air Arms air rifle

This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…

Downloads
472
Likes
44
Rating
4
P
PrintablesPeterH1500

Brake Pipe Cap (metric M10)

( Update 29 Jun 25 - Please note… Of the few bits of feedback on this model, most indicate that the central pin can break off and jam in the end of the brake pipe. It's then difficult and messy to remove. Therefore, please ensure that you…

Downloads
469
Likes
40
Rating
5
P
PrintablesJoenge

Porsche brake clock

A clock for every Porsche fan

Downloads
462
Likes
95
Rating
5
P
Printablesrvsuper8

Brake fluid reservoir cap

Standard Euro E20 thread. Started with another cap but the others had issues. So I made one from scratch. Needed a vent cut out and center protrusion for factory gasket support. Need to be a bit beefier to prevent cracking of the cap.…

Downloads
461
Likes
12
Rating
5
P
Printablessfluck

Disk Brake Transport spacer for Shimano Deore M6000/M615

This is a spacer that can be fitted to Shimano Deore disk brakes, so that wenn you remove the wheel with the brake disc and accidentally activate the brake, the brake pistons dont fully close and you are still able to insert the wheels.…

Downloads
450
Likes
31
Rating
4.67
P
PrintablesDarthHeino

Brake Line Guide KTM, Husqvarna, GasGas

I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…

Downloads
450
Likes
43
Rating
0
P
PrintablesEadubs

Drawstring Brake / Cord Lock

This is a drawstring brake/clasp used to easily adjust the drawstrings on gym shorts, backpacks, or anything else that your heart desires. I have had success printing with ABS, 0.2mm layers. PLA warped in the washer/dryer, but the ABS is…

Downloads
448
Likes
71
Rating
4.67
P
Printablessmoura

Playseat Challenge Shifter with Handbrake Mount TH8A/G29

I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…

Downloads
444
Likes
36
Rating
5
P
PrintablesEvan Showalter

Brake and Shifter Cable Clip

Clip used to attach the brake and shifter cables together for neatness. Very tight fit.

Downloads
437
Likes
200
Rating
5
P
PrintablesMintz

Nissan brake pedal stopper (universal)

so as it states this is a brake pedal stopper, this stopper will work on most S ( Silvia ) chassis cars, R ( skyline ) chassis, Laurel Chassis, Cefiro, infiniti G.., most Z ( Fairlady/ 350z,370z etc ) chassis, Altima, Maxima, Sentra,…

Downloads
437
Likes
20
Rating
5
P
Printablesbroodro0ster

Simagic Haptic Reactor (HPR) mount for Heusinkveld Sprint brake

Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…

Downloads
436
Likes
16
Rating
0
P
Printablescdsmakestuff

Brake Pad Lining Gauge Measuring Set

If you find this thing useful, please consider leaving a tip. Thanks! https://paypal.me/cdsmakestuff Vehicle brake pad / shoe lining measurement gauge set. Quickly measure brake pad wear without pulling the caliper off. Three different…

Downloads
435
Likes
92
Rating
5
P
Printablesxxblyxx

Fanatec CSL Brake and Gas pedal

Fanatec CSL Brake and Gas pedal

Downloads
433
Likes
55
Rating
5
P
PrintablesMalte

Rim Brake Alignment Tool

This is a rim brake pad alignment tool designed to help you toe-in your rim brakes. By doing so this tool will add a slight tilt to your brake pads to avoid squealing and screetching sounds when braking. Designed with little hooks and a…

Downloads
431
Likes
42
Rating
5