152 models
This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Simple gridfinity tray to store your FNIRSI DPS-150 DC power supply. The power supply fits snuggly halfway down in the tray and can be lifted up with no problems. You can store the alligator clips and other accessiories in another box,…
Print approx. €3.54–€4.32 excl. taxPreliminary estimate for one variant
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…
Replacement Piece For the True Innovations DPS 3D Insight Gaming Chair, This Connects The Rotating Lumbar Piece Under The Head Rest. You Will Need Hardware From The Existing Chair Since This Only Replaces The Rubber Arm. Installation…
This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…
DPS Lumbar Support Replacement Part ===================================== April 23, 2025 - Version 2 is now available! Adjustments were made to the original model based on user suggestions and comments, changes include: Changed dimensions…
Case for FNIRSI® DPS-150 Programmable Mini Portable DC Power Supply. Buttom and top is clipped with 8x Ø 6mm x 3mm magnets together. The power supply can be used to store DPS-150 and all necessary cables. During operation, the DPS-150 can…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
Print Settings: Supports: Yes; Tree Resolution: 0.2 Infill: 38 Filament brand: Sunlu PLA
This is case for server power supply modified for HAM use. Material used for print: GT-3 High Speed Matte PLA. Attention: please pay attention to the changed switch model.
I can't find the exact USB-C board I bought from AliExpress. It's no longer sold, but it's similar to this one at 20V: https://www.aliexpress.us/item/3256802974608811.html I hot-glued the board into the bottom. Obligatory animation: This…
Power supply housing should also fit DPS5005 DPS5015 DPS5020 SK120 SK60. Printed with Prusament PETG Orange. Organic supports for front panel outlet only. The feet needed to be printed 4 times and are glued to the bottom part. Additional…
I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…
Remodelled in Fusion360 to make a few slight changes Add XT30 connector Change switch to a model I had at hand Add bottom intake vents to allow for natural convection Uploaded f3d source file for customization of input jacks
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
This model allows you to mount a Fnirsi DPS-150 to your IKEA SKÅDIS board, using the T-Clip System by @LineArcLine . To create this, I also made use of the Skadis T-Clip negative hole by @capze_178225 . You will need to print two of the…
Case for a DPS5005 (or other variant) power supply module with power button, 4mm banana jacks and DC barrel jack input. Unfortunately the closing mechanism was somewhat of an afterthought and therefore requires 4 of the hooks to be…
I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…
Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for…
This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.
Modelled in Solidworks, I printed it at 0.2 layers on a Prusa Mini, turned out fine. Doesn't need any supports, but will need glue for assembly. The “Gray to Black” part needs a filament swap at 6.6mm high, or just color the tip black…
Cookie cutter for the logo "DPSG Lilie" at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Cookie cutter for the logo of the "Biber" (a beaver) at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…
This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
I have unused 24v power supply laying around so I've made case for it so it can act as “lab” (big quotes here) power supply it uses DPS3005 dc dc module (or any with same form factor) and some other parts like power cord: 1x AC-17 250V…
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
Cookie cutter for the logo of the "Wölflinge" at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.20mm Infill: 20% Filament: PLA
A case for the DPS5020 Power supply Module. It is designed so that you dont have to work precicely when removing the support. The screwholes for the lid are 2,5mm so M3 should work, however special plastic screws are better. For mounting…
Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…
Remix DPS case for DPS5005 or similar
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
I sell an improved version of this project as a kit: https://www.tindie.com/products/tokarski_dev/usb-c-bench-power-supply-kit/ (it has no pigtail usb-c cable, just a normal socket). More about the design process:…
This is my first design of a bench power supply base on a DPS5005 and a 36V 5A Power Supply Module. Update: 03.10.2022 I have added a V2 Version of the two part. They are much stronger and the fitting of the power plug screws is better…
Ein Schlüsselanhäger in Form der DPSG-Lilie Schichthöhe: 1mm
DPS Centurion Gaming Chair Hand rest adjustment knob. Mine Broke so I made one
A simpler molle patch with the logo “German Scout Association Saint Georg” (DPSG) Ein einfacherer mollepatch mit dem Logo "Deutsche Pfadfinderschaft Sankt Georg" (DPSG)
This is an enclosure for a DPS5005 voltage converter with Bluetooth and supply board 230V AC to 36V DC. For higher load of the DPS a fan 60x60x15mm was installed, but I also provided a cover without fan. The fan cover is for the inside,…
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
BOM: 1no. HP DPS-800GB Server Power Supply. (12V output) 1no. DC GND Isolated HP DPS-800GB Server Power Supply. (12V output) 8nos. 213mm x 12.8mm width x 2mm thk. Alum. bar. (support bar model.pdf) 16nos. m3 x 6 screw. 1no. DC 50A LCD…
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
When Converting a DPS-1200FB power supply for hobby use, this cover will keep the 12 volt connections protected but still allowing ventilation of the unit. See the following article for how to do the conversion.…
congratulations to "myang777" for the outstanding design of his DPS enclosue - DPS fits great and very easy to print. The only thing a changed was a XT60 Plug in the back, in order to power the DPS with LiPO battery (and other stuff).…
DIN rail mount case for DPS/RK power supply or WEL electronic load modules. Uses 12mm openings for button, safety 4mm lab sockets and power input (e.g. my panel mount USB-C PD trigger holder ) The back attaches via M3x8 counter sink…
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…
Portable USB Power Supply based on DPS3005 or similar
This is a conversion of an HP DPS-800GB server power supply, into a benchtop supply with connectors more commonly used for electronics and electrical prototyping. It's designed to be relatively easy to make, and not least easier to…
Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it. The banana connector used…
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
This case holds the power supply at an angle for desktop use. There is a spot on the back for an XT60 connector for the power input. There are two holes on the front for banana screw terminals for the power output. There is a spot in the…
From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
Simple but powerful modular laboratory power supply from one DPS3005 modules and variable DC power sources (laptop power adapter, li-po battery, ... 36V industrial LED power sources). The main idea is that pupils can build a simple power…
This is my cover for the HP DPS-1200FB power supply. The switch is this one: http://www.banggood.com/5Pcs-Black-Push-Button-Mini-Switch-6A-10A-110V-250V-KCD1-101-2Pin-Snap-in-OnOff-Rocker-Switch-p-1096122.html?rmmds=myorder Category: DIY
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
Pfadfinder Halstuchknoten mit der DPSG Lilie
POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…
This is a remix of the popular Rugged Box (Parametric) , specifically adapted for storing and transporting the FNIRSI DPS-150 portable smart power supply. Key Modifications Custom Insert: Features a dedicated tray tailored to the exact…
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
Just my design of a DPS5005 Case with Fusion360. Inspired by thing:3472791 but fully redrawn. Category: Tool Holders & Boxes
Customized version of https://www.thingiverse.com/thing:266400 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=266400 Instructions Using the following options: focus = 1000 aperture = 200 outer_Diameter…
This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…
Designed this keychain hope you enjoy i added also the Inventor file (iges) Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament: ka PLA Category: 3D Printing
Lost my original sag indicator so decided to make a new one from recalling what it looked like. Mounts onto Fox DPS/DPX2 with zip tie and allows you to measure the shock sag. I've place 1mm marks from 5mm to 18mm with heavier marks at…
Only a small cookie cutter I created for our scouts. If you like to, check out my other designs too!
Seven revisions and two stupid mistakes later... This is a semi-open hardcase for the Fnirsi DPS-150 power supply. The PSU be used in one position, or turned around in order to protect the screen. (I am using a custom glass screen…
A housing for two HP-DPS 1200FB power supply units. The enclosure was designed so that two voltmeters / ammeters have space and the whole thing can be mounted under a table, for example. In the top part there is also space for four 4mm…
Cookie cutter for the logo of the "Pfadis" (a palm) at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA
Simple but powerful laboratory power supply from two DPS5005 modules and 47V industrial LED power sources. 2019-01-18 Added modification for single DPS (vertical and angled variant) Print Settings Printer: Molestock Rafts: No Supports: No…
This is a type-c powered ''lab bench power supply'' if I can call it that. It uses the following components: RD DPS5020 Constant Voltage current DC DC Step-down Mounted with heat-set inserts and m3 screws 1PCS/5PCS/10PCS USB-C PD Trigger…
Printed with MK3S+/Generic hi viz green PETG/0.2mm QUALITY/organic supports Remixed using TinkerCAD This was my first remix and I am new to 3D modeling, so feedback/suggestions welcome. Thanks! **UPDATE: Initial tests did not yield…
A small design I did for my German scouts. Printed it on my Bambulabs printer with different thicknesses. Idea: You could print the sign with glow in the dark PLA so all the guitar playing people light up at the camp fire If you like to,…
Case for the DPS5015 Power Supply Board and Display. DC Plug and USB-C board in the back for two different options of powering everything with a threeway switch to choose and turn on/off. There is enough Space for a two LM2596 Boards for…
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
Können gut mit Acrylfarbe in der jeweiligen Stufen oder Stammesfarbe angemalt werden. Roverserverknoten: https://www.thingiverse.com/thing:4844576 Empfehlung: Ich hoher Qualität Drucken und umgedreht aufkleben.
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
Case for the DPS3005 programmable power supply. Created in OnShape.com - here's the source: https://cad.onshape.com/documents/a387dafa34ddb2b0b1734add/w/661b6e36556eeb673311f490/e/dcde09774cb5d0aa43c715d4 And here's the whole story:…
Case for power supply modules like DPS3003 DP20V2A 30V5A 50V5A DC32V/3A. Minimal design without screws ;) Print Settings Printer: CR-10S Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: 3D Printing
DPSG-Lilie zur Verwendung mit diesem (Rover)Halstuchknoten. Zweifarbig drucken oder mit einem Lackstift anmalen. Print parameters 0.2mm Layer Height 100% Infill Ironing top layers (recommended)
Housing 270x120x120 mm for a programmable laboratory power supply. Built in: Switching power supply Meanwell RS-150-15, 199x98x38 mm Controller DPS3012 (others will probably also fit) Axial fan 40x40x10 24 V Power switch Laboratory…
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
FR Boitier en quatre parties pour une alimentation de serveur : HP HSTNS-PD41 DPS-800AB-11 A 723600-001 un bloc troué pour un poser un interrupteur, un bloc qui s'emboite dans le premier pour stabiliser et servir de pied un bloc a…
This is a replacement handle for the back of a HP 1200w Server Switching Power Supply ( P/N438202-001). Freecad save included. Category: Computer
I remixed the original backpanel to accommodate a female XT60 connector, so that I could use the DPS5005-based PSU with https://www.printables.com/model/322597-lrs-200-power-sleeve that I have built quite some time ago as a universal…
This is an accurate model of the dps5015 major size constrains. Use this to get a feeling for if it fits in your project.
Case for the DPS3003 and USB-C PCB from China Category: Electronics
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…
Überabeitung des Gehäuse von zsoltm (ein großes Dankeschön an dieser Stelle) um mit den mir zur Verfügung stehenden Teilen arbeiten zu können. BOM (Vorschlag): 1 pcs DPS5020 1 pcs USB PCB 4 pcs M3x8mm Linsenkopfschrauben (Verschraubung…
![[Updated] Costco DPS Chair Silicone Lumbar Support Replacement](https://media.printables.com/media/prints/01544801-02d9-419c-b485-22ec96633739/images/9577105_f75aedde-9e0b-40d4-9bea-eb2aeaa506a5_553758de-0120-4b01-a4f6-a43bbf2f3a26/screenshot-2025-04-23-010412.png)
