1,384 models
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
I needed a better way to configure my first layer. I use this print to do live z adjustments. Print instructions I find this to be a good test. it handles allot of the shapes that will ruin a print of the first layer does not have a good…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.
TL;DR Single layer whole print bed, see how good or bad it comes out, no change to hide anything. Collection tools, 3D printing update 2026.1001 - Sovol ZERO added Sovol ZERO -> the tiny blue square ES_Sovol_Zero_152x152x0.2.3mf…
Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm
I created a first layer test for myself after the prusa got a new heater block. It has the shape of an octagon, and so I can now calibrate the first layer nicely. Always only benchys or cubes print after a repair I did not want. The print…
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
Stormtrooper Sharpshooter of the First Order. Updated model so its 1 shell and flat bottom. 2.27pm cmt 4/24/2023
Print resolution: 0,20 Material: PLA
I made these three "Custom First Layer Calibration Squares" to help you dial in your perfect first layer. When printed properly they will come out as a solid single sheet of plastic. Its a fast easy print! .20mm Layer Height Single Layer…
Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - I have now remixed it for use on my Ender 3. In Summary, you adjust…
Halo-inspired wall-mounted first aid kit! Has room for a roll of medical tape, adhesive bandages, eye drops, tweezers, gauze pads, alcohol pads and more! Require two (2) 8x3mm magnets to form the closure. Cavities are modeled, magnets…
This model has been created to calibrate our first layer using the full printbed.
The first steam locomotive by Richard Trevithick , a British inventor from 1804. I was looking for some mechanical model and I found this locomotive, I really liked it, so I tried to make a 3d printed model for those who like history and…
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
< Beep bada beep AI is loading... > Is it a top secret stealth aircraft? Or is it a gate to another dimension? No! It's the next big thing since sliced bread! Inspired by hardcore gamers all around the world.... With edges so edgy it will…
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - So, here it is. See the original author's video below, or follow…
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
First layer 150x150 0.2H First layer 150x180 0.2H First layer 50x50 0.2H
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
This is a 3D model of the world's first chiral aperiodic monotile. “Chiral” means “handed” -- same as left and right handed screws you can't transform left into right just by turning the object. It's an update to…
This is the model of the Terran-1 GLHF (Good Luck, Have Fun) rocket, which had a partially successful first launch a few days ago, March 23, 2023. Relativity Space has some info on their rockets at https://www.relativityspace.com/rockets…
Prusa Mini full bed calibration test model for 0.15 and 0.2 mm layers. No need to start calibration print after calibration print. Print once, calibrate once. Because this model takes a while to print and fills the whole bed, you can…
The First Order Light Cruiser can often be seen docked at the nose of First Order Star Destroyers. It is 211,2m long, has four turrets and can carry 24 Tie Fighters and 1 Shuttle. UPDATE: Added 1:500 Scale Version Appearances in Star Wars…
A token for 1st player in different height for color change.
A series of self-glowing exit and emergency signs i published on another platform a few years ago. 2 color print. Switch filament from green to self glowing for the final layers. The gcode files for Prusa i3 MK3S already have the color…
I decided to design this WWII First Aid Kit , originally used during World War II and manufactured for U.S. Army Jeeps . The model has been created after extensive research, using all the historical information I was able to find. It is a…
Have you ever wanted to redo your first-layer calibration, but you have a 0.6mm nozzle installed (or some other variant configuration)? The STL file below allows you to slice a first-layer test print for your printer's particular…
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
These two models are designed for Prusa MK3S and Prusa MK3S+ first layer calibration. You can use the 30mm square or 25mm square design as you wish. There are gcodes ready to be used if you have one of both 3D printers. WARNING: This…
Had some problems with some filaments not sticking to bed, so I made few benchmark shapes and sliced them in 5*C intervals between 180-230*C Some times the temperatures given in box are not the best ones ;) Files are sliced for Prusa…
Printing with PLA - testing first layer on box shaped object with different infills.
Hello, Today I have for you Calibration of the first layer test for all printers. Ideal for all printers. Contains models: 225x225 -256x256 -300x300 -350x350 -400x400 Beautifully set up the perfect first layer! :-) I used PLA as the…
Introducing our Prusa MK3S+ First Layer Test Sheet – the ultimate diagnostic tool designed to put your 3D printer through its paces. Crafted with precision and expertise, this flat sheet is your go-to solution for evaluating every aspect…
I struggled with the Grill template (until I realised it was meant to be printed in A3 Duh!) by which time I had already started this “project”. It's scaled to the original downloadable files so if you change the scale to fit you will…
This is an object that everyone uses at least once a week, it is small and requires only 63cm of filament to be printed at 100% infill. I have printed dozens of them for each friend who sooner or later is forced to go shopping, print it…
Prusa mini+ Kalibrace první vrstvy pro trysku 0.25 Filament PETG First layer - test Nozzle 0.25 Layer 0.15
Držák Plechovek který pasuje do otvoru vedle řadicí páky jde tam pěkně na tucho ale sedl. (U mě nejde použít klasicky)
This is First layer test for the Original Prusa XL Single Tool 360 X 360 X 0.2 MM Available for Gcodes for PLA & PETG
Memento mori set of 6 - most of them two colours cca 20 cm wall art coaster matrix for graphics or frottage fan: memento_mori (6): You may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model |…
YOU WILL HAVE TO BRING DOWN THE MODEL A LIL BIT BECAUSE SOME PARTS OF THE TRIDENT WILL BE LEVITATING . DO NOT PRINT AT FULL SPEED IT WILL 89% FAIL TO PRINT SINCE IT HAS A LOT OF LITTLE DETAILS , images soon since i lost my phone I WILL…
Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.
I wanted an ab roller but did not want to buy one because 2 day shipping is way too long! So I decided to print my own ab roller in 2 days and double the price of an ab roller. That's what we call efficiency me bois. Yeah, get that 8…
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 20 - 30 minutes Slicer settings: 0.2-0.3mm layer height, 5 perimeters, supports everywhere Post processing instructions: Remove the supports gently and…
7" x 4" embossed First Lite logo with backer plate. 3mf file is setup for .40mm extruder and 2-colors with .20mm layer height except first layer at .35mm.
100x160mm sign, reading “Everyone dies, Some live first”, with art of a person who has chosen to knife fight with a dragon. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode.…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Some test files to adjust your settings to get the perfect first layer. These will print 1 layer provided you are using a 0.2 mm layer height in your slicer settings. Then inspect your print and tweak one setting at a time until you get a…
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
A very simple test of your first layer
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Simple single layer cube to help you tweak your z offset. Print at .2mm Layer height Scale X,Y, if you want it to cover more of the build plate
Yet another first layer calibration surface. Use it to get your Z level for the first layer right. Ooze free gcode!
Hindus believe that over 15,000 years ago, predating all religion, Adiyogi, the first Yogi, transmitted the science of Yoga to his seven disciples, the Saptarishis. He expounded 112 ways through which human beings can transcend their…
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . After a lot…
10/9/22: Permissions on the Google sheet have changed to view only so once you open up the link, please make a copy for yourself! Also i would advise you to take a screen shot of your original settings if they are currently working for…
Update 9-11-2022: Added a version for 0.8mm nozzles. Tick marks of the old version didn't print correctly with a 0.8mm nozzle. Update 1-20-2022: Added a PDF file with a template, to write down the Live Z values used in the calibration.…
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall. The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the…
DISCLAIMER: Use at your own risk! Not responsible for damage to your printer or accessories! Important: Always restart your printer after using this file! This file uses the G92 command, which changes your printer offsets. These offsets…
This is a simple project containing 6 models of different sizes for testing how level your bed is. The models are 1 layer thick and in some common print bed sizes. You can always resize as needed, too. Enjoy!
This is a first layer calibration test for any printer. It consists of 5 identical tiles. Recommended print settings layer height: 0.2 mm fill angle: 0° perimeters: 2 skirt: 0 first layer speed: 25 mm/s It should be centered on the bed…
Simple print for calibrating the first layer and bed leveling. Designed for 0.2 mm first layer but can easily be adapted
first layer calibration 21x21cm if your printer is corecly calibrated this should look like foil. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: fiberlogy PETG blue…
This is a 4 x 4 inch square used to help calibrate that important first layer.
Centauri Carbon First Layer Test to make sure your first layer is up to standard. The 3MF file is already set in the print bed, so you don't need to adjust it.
Elegoo Neptune 3 Max First Layer Calibration Test Just slice and print as aligned!
You downloaded it? Please like :) It doesn't cost anything and it encourages me to implement more projects :) FIRST LAYER (layer 0,2mm and squares 20x20 mm) size: 100x100 150x150 180x180 200x200 210x210 235x235 256x256 300x300 320x320…
First Layer test for Creality K1 220x220x0.2mm
This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…
Another first layer test print. This print makes use of as much of the bed area as possible, without having to disable the filament cutter standoff. X1C users should print without the flow calibration pattern enabled. Useage 1: A simple…
Author: Prusa Research (Dominik Sauer)
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. A few of the parts, are sadly missing. If anyone…
Perfect collection to print metallic or cartoonish. These are the characters included: - DENDE - DODORIA - FREZZA - VEGETTA - ZARBON Thank CREATIONSISHI for this spectacular pack
First Layer test for Creality K1 MAX with 0.1 mm layer high and 0.2 mm layer high.
Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…
This is a simple zig-zag to allow a visual calibration of first layer. This has the same purpose of the V2_Calibration.gcode that comes with Prusa's. Check Prusa's Video . This have more zig-zags to allow you to keep tuning until you are…
Hello again! I know that I had already published the top caps before but I have made small changes to them looking for easier printing and now I am adding the STL and 3MF files to make the 3 remaining balls of the first generation:…
First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…
I like to start each day with a fresh cup of coffee and my personal Bed Level Test. That ensures a great morning and perfect prints every time! The test printed with red filament is ideal. The extrusion lines are connected and cohesive.…
Elegoo Neptune 3 Pro First Layer Calibration Test Just slice and print as aligned!
A 25mm square single layer test print for checking your 1st layer calibration. For minimum clean up there is no brim, and a small handle to pull the print off the bed without removing the sheet. g-code for both PLA and PETG Two versions…
Just a quick make for you to start your season while waiting for kits!
Remix of the famous “Rugged Box (Parametric)” by @Withy. I made the box a bit smaller to fit some bandaids I had at home and added a First Aid symbol on the lid. I put mine in the kitchen, in case someone cuts himself :) INSTRUCTIONS: You…
Model is 100mm x 100mm x 0.24mm high. Easy to slice and print then adjust z on the fly giving you an ideal visual of your first layer. Also good for running finger nail across for finer tuning of a smooth first layer. (Also a nice easy…
Print layer height a .2 on printer to test first layer
![First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]](https://media.printables.com/media/prints/104767/images/1049067_18c18458-fa9e-4654-902c-b1e97a049d27/4c891d12cf05afc76616116d7b423361_display_large_10.jpg)
