Search results: k3s

Sort order

2,607 models

P
PrintablesPrusa Research

i3 MK3S+ printable parts

All printable parts for your Original Prusa i3 MK3S+ Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide. Attention,…

Downloads
125,293
Likes
5,180
Rating
4.95
P
PrintablesPrusament

Tension Meter for the GT2 belts of i3 MK3S+ or Prusa MINI+

The model of the tension meter helps you control the tension on the belt of your Prusa printer. It's specially designed to check the tension of your Prusa printer's belts. It works with Original Prusa i3 MK3/S/S+ with the belt GT2. How to…

Downloads
37,052
Likes
5,941
Rating
4.89
P

MK3S Spinning Gyroscope

Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports

Downloads
6,230
Likes
690
Rating
4.93
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+/MK4 Vibration Damper V3.0

Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…

Downloads
2,260
Likes
584
Rating
4.88
P
PrintablesOurAngryBadger

MK3S Y-Axis Motor Mount Ultra

I remixed xander1's remixed design of the beefier Y-Motor Mount to make a few changes: (all credit goes to xander1 and teookie for their original sturdier design that incorporates the end-stop) Increased width of the motor mount by 1.6mm…

Downloads
1,516
Likes
345
Rating
4.81
P
PrintablesThieme

Anti-vibration feet mk3/mk3s/mk3s+

Anti-vibration feet set for the prusa mk3s / mk3 Print instructions Anti-vibration feet set for the prusa mk3s / mk3

Downloads
1,199
Likes
128
Rating
4
P
Printablesstassek

MK3S black PSU holders

MK3S black PSU holders (top/bottom part) for IKEA lack. To fix the PSU in there are no screws needed, just slide the PSU between the parts.

Downloads
1,166
Likes
144
Rating
4.9
P
PrintablesRui do Carmo

Squash Ball MK4/MK3s/MK3s+ Vibration Damper V4.0

New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…

Downloads
1,154
Likes
285
Rating
4.91
P
PrintablesLV3D

MK3 / MK3S / MK3S+ X idler with tensioner

Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…

Downloads
769
Likes
102
Rating
4.91
P
PrintablesPetclaud

Prusa i3 MK3S Noctua Extruder fan cover

The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…

Downloads
679
Likes
79
Rating
4.63
P
PrintablesRui do Carmo

SquashBall MK3s/MK3s+ Vibration Damper

Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…

Downloads
564
Likes
126
Rating
4.71
P
PrintablesOregonerd

MK3s display ribbon cable holder

I had trouble stuffing the cable Prusa display ribbon cable in the 30mm extrusion during assembly. I thought up a ribbon cable holder that fit the extrusion. So I made one as my first test of Atom3D and Prusa design to print process. Made…

Downloads
474
Likes
60
Rating
4.2
P
PrintablesSimonpk

Extruder Motor Cooler MK3s/+ by Simonpk

Hello, I'm industriel designer, I usually draw on Rhino3. I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The…

Downloads
449
Likes
144
Rating
4.64
P
PrintablesTobashadow

Prusa MK3S MK3S+ Speed profile + Best Supports settings Combo

Do you still have a stock MK3S or MK3S+ and need a bit more speed out of it for day-to-day stuff? This is the answer. This is my 0.32 layer height profile for 0.4 nozzles with every tweak I could come up with and I also included my custom…

Downloads
441
Likes
27
Rating
4.5
P
PrintablesmoWerk

Full Extrusion Rail Covers | MK4S & MK3S

Cover Your Original Prusa MK4's Extrusion Rails. Keep dust and debris out of your extrusion rails while adding a splash of color to your printer. Issues Addressed: Preventing dust and debris from accumulating within the rails, ensuring…

Downloads
440
Likes
90
Rating
5
P
PrintablesKorA

eSUN dryer holder for Prusa MK3S or MK4S

Pattern from the website: https://www.thingiverse.com/thing:4904219 Drawn for eSUN eBOX Lite dryer. I've added cutouts for buttons. Printing time for both parts is 12 hours. EDIT: After several days of use, I noticed that I made too large…

Downloads
222
Likes
31
Rating
4.83
P
PrintablesJavier M. G.

First Layer Calibration MK3S/MK3S+

These two models are designed for Prusa MK3S and Prusa MK3S+ first layer calibration. You can use the 30mm square or 25mm square design as you wish. There are gcodes ready to be used if you have one of both 3D printers. WARNING: This…

Downloads
199
Likes
19
Rating
0
P
PrintablesNat

MK3/MK3S Side Filament Guide

For those who have their spool to the side of their printer, this is a simple and elegant solution to your guide's needs. I liked the original, but I kept forgetting to thread the filament through before loading. I remodeled it to fit a…

Downloads
185
Likes
31
Rating
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Downloads
177
Likes
12
Rating
3
P
PrintablesSound-Maker

Vater Unser Kreuz mit Standplatte Remix Mehrfarbig MK3S+MMU2S

Mehrfarbiger Druck mit Prusa MK3S+MMU2S, mit PLA in Gold u. Schwarz. Druckeinstellungen siehe Fotos. Gedruckte Teile zusammen stecken, fertig. Bei mir sitzen sie sehr stramm so das kein Klebstoff benötigt wurde. STEP-Dateien für Eigene…

Downloads
164
Likes
9
Rating
5
P
PrintablesEmpty Shape

MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks

I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !

Downloads
135
Likes
9
Rating
0
P
PrintablesDiego F2M

(INSIDE FRONT FEETS)SquashBall MK3s/MK3s+ Vibration Damper V3.0 (for toolbox version)

if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…

Downloads
129
Likes
27
Rating
5
P
PrintablesForker45

MK3S+ Vibration Isolation Feet

Update: included TPU feet from Elan As part of my Lack Enclosure Build for my new MK3S+, I wanted to isolate printer vibration from the table top and reduce noise. I designed my own feet which included outboard supports on the front of…

Downloads
125
Likes
53
Rating
5
P
PrintablesLucky

Anti Vibration Squash Ball MK3s/MK3s+

Malgré une surélévation de l'imprimante qui ne gène en rien, il se fixe a la place des supports d'origine. J'ai utilisé du TPU pour la partie haute avec un remplissage a 30% et PLA 50% pour l'autre partie. Vous pouvez remplacer le PLA par…

Downloads
105
Likes
18
Rating
5
P
PrintablesBM

Integrated Enclosure i3 MK3S (heat chamber)

Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…

Downloads
94
Likes
34
Rating
0
P
PrintablesGrzegorz

MK3S/MK3S+ LCD Display Cover

PLA, Nozzle 0.4, 0,20 mm, Infill 15%

Downloads
80
Likes
10
Rating
0
P
PrintablesPeter Larsen

Simpel dial indicator mount for Prusa MK3s+

Mounting to micrometer clock, for help in getting a flat bed when making the Nylock adjustment. I find this mount more accurate than others I have tried. You can recreate the same measurement every time even if you move around the…

Downloads
72
Likes
7
Rating
5
P
PrintablesAdam

Modified adapter-printer to fix filament detection problem in MK3S+

This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…

Downloads
58
Likes
9
Rating
0

Prusa MK3s Compact Horizontal Spool Holder [No bearings required]

DEPRECATED: After a long time of testing, I decided to stop using it. The designed is flawed (if printed with PLA) and no matter what you do it will bend over time. Not recommended. This spool holder was designed to meet the following…

Downloads
57
Likes
13
Rating
5
P
Printablesoverflo

Corona Extruder for Prusa MK3S (and possibly others)

A Corona Virus costume for your extruder. Self replicating machines are en vogue in 2020 ;) The design is a remix of Corona Virus (2019-nCoV, COVID-2019) by gregbejtlich I found here: https://www.thingiverse.com/thing:4166787 You need a…

Downloads
46
Likes
6
Rating
4
P
PrintablesLukáš Zounek

Sqash ball feet MK3S+/3030 Profile

Antivibration feet for MK3x printers and other printers using 3030 profiles. Needed for assembly: 1x M3x18 1x 3030 M3 T slot sliding nut 1x Sqash ball

Downloads
30
Likes
4
Rating
0
P
Printablespaul020559

Prusa Mk3s Twirly Knob

A twirly knob for the Prusa Mk3s 3D printer. Twirling the knob with a finger in the circular ring makes adjustments accurate and very fast… Printed in recycled PETG at 0.2 mm layer thickness with the speed cranked up to 150% (Settings →…

Downloads
29
Likes
5
Rating
0
P
PrintablesWerner

Resonance Damper MK3S/ Anti Vibration Feet

My printer is on an old, wobbly table. The vibrations of the stepper motors were transmitted throughout the house before my small absorbers were placed underneath. These dampers redirect all vibrations into the upper wall of the…

Downloads
27
Likes
5
Rating
0
P
PrintablesTELDON Computer

Raspberry Pi Zero (2) W mount for Original Prusa i3 MK3S+ with ALL PINS

I modified the object after printing to fit a distanced rasPi because I bought the version whit all pin

Downloads
15
Likes
2
Rating
0
P
PrintablesSchaffer.la

Mk3S Heatbed wire manager

Modified from the latest heatbed cover (top) from Prusa. place a 6 inch (or so) filament (with some curve to it) into the small hole in the part, then slide the filament into the wire bundle and attach the top to the heatbed. I did this…

Downloads
13
Likes
1
Rating
0
P
PrintablesKryštof

Temp Tower PLA, PETG, ABS/ASA for Prusa MINI+, MK3S+ and MMU2S

Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…

Downloads
34,630
Likes
2,166
Rating
4.9
P
PrintablesPrusa Research

i3 MK3S Printable parts

All printable parts for your Original Prusa i3 MK3S. Note these are the parts for the older MK3S version, not the newer MK3S+! Some of the parts are not compatible! For MK3S+ parts, see the respective printable parts. Attention,…

Downloads
24,296
Likes
609
Rating
4.94
P
PrintablesPrusa Research

i3 MK3S to MK3S+ Upgrade Printable parts

All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…

Downloads
23,115
Likes
614
Rating
4.94
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ - SideBoxes for some Tools

A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…

Downloads
12,797
Likes
1,963
Rating
4.91
P
Printablesraykamp

Prusa i3 MK3s black PSU replacement frame brace with M4 bolt holes

This part was designed this for a Prusa i3 MK3S with an accompanying IKEA Lack enclosure . In the instructions for building the enclosure, it's recommended that you replace the power supply unit (PSU) with a brace like this, and relocate…

Downloads
11,350
Likes
450
Rating
4.94
P
PrintablesPrusa Research

i3 MK3 to MK3S+ Upgrade Printable parts

All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…

Downloads
10,729
Likes
285
Rating
4.85
P
Printablesteookie

Delta-P fan duct V2-R2 for MK3S(+) extruder

July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…

Downloads
10,270
Likes
1,935
Rating
4.87
P
PrintablesPrusa Research

2kg spool holder for Original Prusa MK3S+

Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…

Downloads
8,713
Likes
629
Rating
4.88
P
PrintablesPrusa Research

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Downloads
7,232
Likes
389
Rating
4.91
P
PrintablesMartin_au

Prusa Mk3 / Mk3s LCD cable clips

A cable clip for the LCD cables. Should be a nice tight fit and hold them very securely. Jan 21 - Added an upsized version. The original was supposed to move relatively freely, then be held in place by the cables. The upsized one should…

Downloads
6,904
Likes
1,423
Rating
4.93
P
PrintablesIts-my-right

Prusa MK3s+ Fan shroud adapted for Mk3s

Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…

Downloads
6,768
Likes
293
Rating
4.88
P
PrintablesBuildX

#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…

Downloads
6,619
Likes
1,501
Rating
4.94
P
PrintablesKimframes

Prusa MK3/MK3S/MK3S+ filament guide

I liked the design of the https://www.prusaprinters.org/prints/14150-prusa-i3-mk3-filament-guide filament guide but it did not quite fit my needs so I made a longer version for my single spool holder. Clip has also been modified to grip…

Downloads
5,603
Likes
806
Rating
4.82
P
PrintablesDer Peiner

Fan Guard for Prusa i3 MK3s - snapable

2020-Dec-29: Deleted rubbish. Update the version with bigger mash and smaller front to prevent hittig the leadscrew 2020-April-06: Added new version with much smaller mash - only 0.4mm thick - to pretend hitting the leadscrew at homing…

Downloads
5,313
Likes
1,060
Rating
4.92
P
PrintablesJSund

Camera mount for Prusa i3 MK3/MK3S

Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…

Downloads
5,262
Likes
638
Rating
4.75
P
PrintablesTechnoid

Prusa Mk3S/+ Improved Fan Shroud

This is a completely redesigned fan shroud for the Prusa i3 MK3S/+, which not only delivers fantastic airflow like the old Mk3 shroud did, but which also sits far away from the heatblock and will not melt when printing at high…

Downloads
4,795
Likes
505
Rating
4.63
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ Y-Axis Linear Rail Guide Upgrade

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…

Downloads
3,659
Likes
935
Rating
4.95
P
Printablesdotson90

Prusa MK3S Mesh Side Boxes MMU2S

Just changed the appearance using mesh modifiers in PrusaSlicer. Print instructions Printed using Prusament PETG. Could be printed without MMU. Requires 2 filament changes if you want the multi color.

Downloads
3,575
Likes
695
Rating
4.94
P
PrintablesARTME 3D

Original Desktop Filament Extruder MK3S and MK3S+ by ARTME 3D

Attention: These files are for version MK3S light, MK3S and MK3S+. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may…

Downloads
3,547
Likes
200
Rating
5
P
PrintablesJakob Kriener

Inbus/Allen Key Holder for Prusa I3 Mk3S

This is just a simple Allen Key Holder that you can mount on the top of your Prusa Printer to have them ready at all times. There are four Versions available. One for a tighter Fit of the Hex-Mount and one for a loose one. I recommend the…

Downloads
3,526
Likes
840
Rating
4.9
P
PrintablesKalleKnall

Prusa MK3S and MK3S+ Fan Duct with PINDA Support

Searching for a better fan duct, i found this this (thx to xander1) https://www.thingiverse.com/thing:4124587 The initial tests weren't bad, but the airflow didn't fully reach the rear of the model. So I copied the design and gave it a…

Downloads
3,406
Likes
419
Rating
4.94
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ X-Axis Linear Rail Guide Upgrade - updated (Bondtech Extruder) / MK3S+ Tensioner

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…

Downloads
3,250
Likes
630
Rating
4.98
P
PrintablesAlex Ward

Prusa MK3S/MK3s+ Reverse Bowden filament Sensor Cover

Reverse bowden IR Sensor Cover for the MK3s I have included 3 versions one for the PC4-M10 pass through connector and another for the PC4-M6 connector. I have now added a version for the PC4-M5 connector. Edit 19/2/19: I have added a M5…

Downloads
3,069
Likes
410
Rating
4.96
P
PrintablesCrafty Sven

Thin Quick Hexagon Desk Tidy (Pencil Holder) MK3S

Quickly designed this fairly quick print desk tidy. It has 2 parameters all around so it prints quite fast for its size (around 9 hrs with the included g-code). This is for MK3 only. As soon as you change the scale, the wall would be too…

Downloads
2,944
Likes
420
Rating
4.81
P
PrintablesYosuke

Extruder cable clip for Prusa i3 mk3s

This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…

Downloads
2,883
Likes
587
Rating
4.86
P
PrintablesPrusa Research

Original Prusa i3 MK3S+ Gift card

Do not cut through all. Best results found to be using a default settings: Layer height - 0,15 quality 0,4mm nozzle Prusament PLA or PETG

Downloads
2,873
Likes
836
Rating
4.88
P
PrintablesE3D

Revo Nozzle Holder (for Prusa MK3S)

MODEL DETAILS A clip-on nozzle holder compatible with the MK3 range of printers. Designed for RapidChange Revo Nozzles. A second model is provided with adjusted tolerances and alternate geometry for printing with flexible filaments.…

Downloads
2,854
Likes
321
Rating
4.88
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Downloads
2,668
Likes
521
Rating
4.82
P
Printablesvisle

MK3S+ Hook for scraper tool

A small hook that rests on top of the PSU and hooks around the frame. Perfect for a scraper or something else that you want in short reach. Sporting glorious hexagon cutouts and a hexagon-shaped hook it is a perfect compliment to all…

Downloads
2,633
Likes
521
Rating
4.94
P
PrintablesKryštof

Pin Support Sphere Challenge G-code for Prusa MK3SMMU2S and MINI+

Test the limits of your printer! Pin Support Sphere ChallEnge is a way of testing your printer's capabilities. It is designed to be hard to print, so only well-calibrated printers with quality filaments will print out a nearly perfect…

Downloads
2,590
Likes
88
Rating
4.92
P
PrintablesHaz1

Raspberry Pi 4 - OctoPrint Prusa Mount (MK3/MK3S)

I made this Raspberry Pi 4 OctoPrint case mount for Prusa i3 MK3/s frame. The bracket is merged to the meshed bottom of the case and fits exactly on the m3 threaded holes in the prusa frame. You can find suitable housing tops from me Haz1…

Downloads
2,547
Likes
324
Rating
4.58
P
PrintablesMartin_au

Prusa MK3s upgrade fan duct

Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…

Downloads
2,120
Likes
84
Rating
4.95
P
PrintablesProtoprint

Mk3 R4 (Mk3s) Fan Shroud

The stock shroud tends to warp and melt easily, does not provide good coverage for the sides or back, and is only mounted with one screw. I wanted to improve on all of those deficiencies. While I'm quite pleased with the result, my…

Downloads
2,097
Likes
125
Rating
4.15
P
Printablesarmer_geddon

MK3S IR-Sensor Spacer 0.5 mm

Upon assembling my new MK3S Kit I noticed that the Autoload Function did not work and the IR-Sensor always showed 1. A quick search led me to this entry in the Prusa Forum:…

Downloads
2,073
Likes
98
Rating
4.87
P
PrintablesIPIND 3D

Prusa MK3S Improved 45 Degree Fan Shroud

Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…

Downloads
2,071
Likes
364
Rating
4.89
P
PrintablesPrusa Guy

Cyberpunk Prusa i3 MK3S+

I think it will come as no surprise when I say that many of us here at Prusa Research are not just technology geeks - we’re avid gamers as well. Some of the luckier members of our team already got their hands on the PlayStation 5 (even Jo…

Downloads
2,059
Likes
964
Rating
4.88
P
PrintablesStrathpeffer3D

Prusa MK3 & MK3S Clip-in Tool Storage Box

I wanted a small side frame-mounted tool box to store pliers, snips, allen keys etc. for my Prusa MK3S. Whilst there are a few options on Thingiverse, for a variety of reasons, none really fitted the bill. I was also keen for it to be…

Downloads
1,802
Likes
336
Rating
4.89
P
PrintablesYosuke

Squash ball feet for Prusa i3 mk3s

I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…

Downloads
1,801
Likes
390
Rating
4.96
P
PrintablesJonas

Prusa Mk3S Toolholder

I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…

Downloads
1,795
Likes
295
Rating
4.68
P
Printablesmarcmitc

MK3/MK3s Steel Sheet Holder

This is a wall mount holder for the Prusa MK3 and MK3s steel sheets. It´s easy to take the sheets out, because it is arranged in stages. I designed two versions: SheetHolder3x and SheetHolder5x

Downloads
1,775
Likes
303
Rating
4.91
P
PrintablesProtonenfalter

Snap-In Fan Shroud for Prusa i3 MK3S(+)

Description This fan shroud is very easy to mount: simply push its intake into the output port of the blower fan. It ‘clicks’ into place and is held securely in the right orientation without any screws or other parts. It is also very easy…

Downloads
1,746
Likes
238
Rating
4.61
P
Printablesoriddlero

Tool Trays - Prusa MK3S Right & Left Side w/ Honeycomb, PRUSA logo & 45 Degree Matched OEM Front

The original design was a nice start / frame, however, I thought it would be an improvement (and a big savings on filament / print time) to add honeycomb cutouts, a 45° front angle (to match the OEM front panel angle), & added the PRUSA…

Downloads
1,680
Likes
402
Rating
4.93
P
PrintablesMarcoZ76

Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable + RHD ver.C fan Shroud

New version of Bondtech BMG Prusa Upgrade MK3S/MK2.5S with RHD ver.C fan shroud. I modified the original version model to be easy printable with FDM printers. The original source:…

Downloads
1,670
Likes
123
Rating
5
P
PrintablesPrusa Research

i3 MK2S to MK3S Upgrade Printable Parts

Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.

Downloads
1,654
Likes
58
Rating
5
P
PrintablesMich

4-axis modification for MK3s with rotational printing head

Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…

Downloads
1,616
Likes
255
Rating
0
P
PrintablesGuZZLo

Bigger Sidebox Prusa i3 MK3S

Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…

Downloads
1,562
Likes
237
Rating
4.57
P
PrintablesjonnieZG

First Layer Calibration Pattern [from Prusa MK3/MK3S firmware]

First layer calibration GCODE for Prusa printers, as implemented in Prusa MK3/MK3S firmware ( https://github.com/prusa3d/Prusa-Firmware ), originally created by Marek Bel. Enclosed GCODE files are generated directly by the firmware source…

Downloads
1,521
Likes
46
Rating
4
P
PrintablesAmmar Faridi

AYF MK3s Part fan duct

AYF MK3s Part fan duct to see the nozzle better while printing . Always prefer high temperature filaments when printing fan shrouds/ducts.. never use PLA.. because it will deform near the nozzle because of the heat. ABS, PETG, PC, CF…

Downloads
1,520
Likes
281
Rating
4.88
P
PrintablesGabe

MK3S Replacement Parts

I didn't see any replacement parts for the MK3S on here so I decided to upload them for easy access. I didn't like having to go to the Main Prusa page to get these files individually so I put them all into their respective folders for…

Downloads
1,473
Likes
135
Rating
5
P
PrintablesReven

Pen plotter attachment for Prusa MK3s

This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…

Downloads
1,459
Likes
290
Rating
4.91
P

Sock friendly mk3s+ fan shroud

A silicone sock adds about 1.5mm of material around the heater block. This seems to be enough to block or divert a lot of the direct air flow from the stock mk3s+ fan shroud. In an effort to compensate for this I've modified the mk3s+ fan…

Downloads
1,443
Likes
102
Rating
4.73
P
Printablesk-eye

Prusa i3 MK3 / MK3S Camera Mount

This is a camera mount for the Prusa i3 MK3 and MK3S. It will hold your camera on the body of your printer. I add also a screw, to attach your camera with standard-thread on the mount. IMPORTANT: If you use the screw, be sure to print it…

Downloads
1,420
Likes
220
Rating
4.87
P
PrintablesEvofab Inc.

MK3S & MK2S LCD COVER

LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…

Downloads
1,413
Likes
106
Rating
4.83
P
PrintablesDennis

Vertical LED Light Bars for the Prusa i3 MK3S/MK3S+

I have a work light over the printer that casts a shadow of the print head and it was very difficult to see what was happening at the nozzle both in person and with the OctoPrint webcam. It's interesting that most of the existing lighting…

Downloads
1,361
Likes
338
Rating
4.89
P
PrintablesHabony Norbert

Prusa Filament guide MK3s MK4 MK4S

Izzószál vezető. Nagyon hasznos kiegészítő, könnyen elkészíthető, és támogatás nélkül is nyomtatható. Az összeszereléshez két 608-as csapágy szükséges. I added two parts, so it can also be used for the MK4

Downloads
1,351
Likes
360
Rating
4.88
P
PrintablesJBoe

i3 MK3S+ fan shroud for i3 MK3S

Object description This is a modified i3 MK3S+ fan shroud which can be assembled in a i3 MK3S. The i3 MK3S+ Design has longer cooling wings for a better cooling as the fan shroud for the i3 MK3S. Print settings: Material: High-temperature…

Downloads
1,314
Likes
68
Rating
4.82
P
PrintablesArtyL

Prusa MK3s RHD CS Fan Shroud - MK3s / MK2.5s

This thing is originally designed by RH_Dreambox on Thingiverse . Thank you to him for putting in the hard work to make this print great. Posted here with conspicuous credit. This fan shroud was designed with Autodesk CFD to create better…

Downloads
1,302
Likes
113
Rating
4.64
P
PrintablesShaun Doe

Prusa MK3 / MK3S / MK3S+ LCD cable clip

It's specifically designed not to wiggle, as pre-existing LCD cable clips for the MK3(S) did and thus were unsatisfactory to me. The opening of the "hook" should point down for a clean look and easy insertion of the LCD-cable. If this…

Downloads
1,284
Likes
265
Rating
4.96
P
PrintablesMAQUINA

Misumi Linear LMU8 Y-Axis Bearing Holder for Prusa MK3s/+

This is the remeshed Prusa Bear style y-axis bearing holder for Prusa MK3s/+. This would allowed you to replace the Misumi Linear Bearing LMU8 without buying the new bearing clips. The only thing you have to change is the existing U-Bolts…

Downloads
1,280
Likes
186
Rating
4.87
P

TPU Test Cube Prusa MK3S with Config for Ninjaflex

This is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the…

Downloads
1,246
Likes
38
Rating
4.86
P
PrintablesAndres L

MakerHawk Raspberry Pi Camera IR Fisheye camera mount for PRUSA MK2 MK3 MK3S

This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407

Downloads
1,202
Likes
166
Rating
4.85
P
PrintablesPjotrStrog

Reshaped Prusa MK3S+ LCD-knob

Reshaped the LCD-knob of the MK3+ to make the tactile feel more like that of the MK3S. So I made it a bit smaller, fattened the arms a bit and made an indentation. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter…

Downloads
1,193
Likes
82
Rating
4.96
P
PrintablesMaverick Ng

MK3S LCD Knob

A better scrolling LCD Knob. Video: https://www.youtube.com/watch?v=Czk4atg710c Print instructions Filament: Prusa PETG Colour: Orange (depends your favorite) Fill: 100% Support: No Filament temperature: 225 - 230 Bed temperature: 85-90

Downloads
1,182
Likes
34
Rating
4.44
P
PrintablesThomas H 3D

MK3S Optical illusion for x-axis

An optical illusion for the Prusa MK3S x-axis. Print Instructions Designed to be printed with 3 perimeters. 10% rectilinear infill. Some users have reported issues with 10% infill and have used 100% instead. No support. Before putting the…

Downloads
1,160
Likes
308
Rating
4.9
P
Printablesnilok

Prusa MK3S IR Sensor Spacer Set

These spacers can be used to correct the IR filament sensor. Just stack them below until reliable readings are achieved. I am also including the f3d file in case anyone wants to print a single, final spacer to suit their exact measurement…

Downloads
1,154
Likes
93
Rating
5