Search results: lament

Sort order

21,544 models

P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Downloads
39,396
Likes
3,966
Rating
4.78
P
PrintablesKimframes

Filament Clip with Screw

1.75mm filament clip with screw. One size fits most spools. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from second edition of filament clip. Second Edition…

Downloads
27,386
Likes
4,994
Rating
4.71
P
Printables3DPrintM.D.

Simple Universal Filament Clip V2+ {NEW 2024 VERSION}

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…

Downloads
26,342
Likes
4,543
Rating
4.81
P
PrintablesSeemomster

Filament samples - 42 materials

A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…

Downloads
26,193
Likes
11,129
Rating
4.96
P
PrintablesLoboCNC

Filament Splicing Jig

This splicing jig makes quick work of joining filament ends. Use a soldering iron tip to melt the ends of the filament segments and then shove together for a perfectly aligned joint. Then clean up the joint with file, razor blade or…

Downloads
25,664
Likes
6,614
Rating
4.72
P
PrintablesPomi

Filament Cutter 45°

Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…

Downloads
22,185
Likes
12,902
Rating
4.87
P
PrintablesK2_Kevin

Filament Clip - K2 Clip

K2 Clip The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to "float" on your filament spool while printing. Extra secure storage using the locking…

Downloads
18,217
Likes
3,120
Rating
4.82
P
PrintablesArea51

Filament Splicing Jig (Remix)

Always wanted a simple tool for joining filament pieces together - when the spool runs low or to join DIY multi color filaments ( Easy Multi Color Filament ). I remixed LoboCNC's fine Filament Splicing Jig : Added compliant hinge to make…

Downloads
12,067
Likes
1,865
Rating
4.72
P
PrintablesExtrutim

Helix Test Cube / Filament Sample / XYZ Calibration

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…

Downloads
11,952
Likes
1,049
Rating
4.93
P
PrintablesGlennovitS 3D

Gridfinity Baseplate (Quick print, lite version, less filament)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
10,060
Likes
1,128
Rating
4.96
P
PrintablesGlennovitS 3D

Gridfinity Box (Quick print, lite version, less filament!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
9,692
Likes
1,312
Rating
4.97
P
PrintablesOverMaintained

Filament Shelf Brackets

3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…

Downloads
7,472
Likes
3,367
Rating
4.9
P
PrintablesKimframes

Filament Clip with Screw SE

Second edition of the 1.75mm filament clip with screw. 31 October 2022 update New body with tearshaped screwhole to fix issue with screw being too tight. Added screw model from original filament clip. What's new compared to original…

Downloads
6,537
Likes
659
Rating
4.6
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Downloads
6,403
Likes
360
Rating
4.89
P
PrintablesCartoonishNerd

Filament Guide for Ender 3 V2

This filament guide was designed to help smoothen the flow of filament from the spool to the extruder of the Ender 3 V2 printer. The filament guide comprises of four parts. After printing the parts, they can be easily assembled by…

Downloads
6,071
Likes
570
Rating
4.68
P
PrintablesAikoly

Filament Sample Spool (honeycomb)

This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…

Downloads
5,818
Likes
836
Rating
4.91
P
PrintablesKimframes

Prusa MK3/MK3S/MK3S+ filament guide

I liked the design of the https://www.prusaprinters.org/prints/14150-prusa-i3-mk3-filament-guide filament guide but it did not quite fit my needs so I made a longer version for my single spool holder. Clip has also been modified to grip…

Downloads
5,609
Likes
808
Rating
4.82
P
Printablesishikawats

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Downloads
4,875
Likes
1,928
Rating
4.81
P
PrintablesDET-Man

PTFE Tube Cap with Filament Label

This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…

Downloads
3,997
Likes
134
Rating
5
P
PrintablesLinearRelation

Filament Swatch Library

A simple swatch to easily see all the filament you have. Easy way to save a bit of a sample filament for future reference. The swatches are designed to perfectly fit Avery address Labels (1" x 2 5/8") product no 15660. Available here :…

Downloads
3,833
Likes
860
Rating
4.95
P
PrintablesCodeName X

Shoe organizer_Less Filament. More Power. Fits All shoe Sizes.

<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…

Downloads
3,536
Likes
1,114
Rating
4.9
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Downloads
3,289
Likes
431
Rating
4.93
P
PrintablesMolodos

Filament Samples | Filament Color Swatches

Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…

Downloads
3,262
Likes
993
Rating
5
P
PrintablesClaus

Filament Cutter 45°

New edition - April 2025: A guide pin has been added to prevent the cutter from twisting. The thread for the screw has been made more print-friendly. All that is needed in addition to the printed parts is 1 segment from 18 mm snap-off…

Downloads
3,149
Likes
273
Rating
4.96
P
PrintablesBTR3D

Filament Rack

An elegant filament rack for your filaments. Except for the 3d parts, all you need is a 15mm aluminum tube and glue. I'm attaching an example product link to the tube I'm talking about. I used 50 cm long, but a little longer or shorter…

Downloads
2,898
Likes
772
Rating
5
P
PrintablesLW design

Ender 3 S1/pro filament sensor bracket

Used to detach the filament sensor from the original spool holder. You might want to do this when building a custom enclosure for your printer or when using a different spool holder. Features: Easy print without support structures Firm…

Downloads
2,871
Likes
417
Rating
4.91
P
PrintablesMy 3D Prints

4 in 1 Tool - Filament & PTFE Cutter + Filament welding

This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…

Downloads
2,688
Likes
860
Rating
4.8
P
PrintablesMister SoaR

Filament Stand

This filament stand provides a simple way to store your filament. Simply place the bar through the center hole of the filament roll and it sits atop the stand bars. Easy to take off and put back on if needed. I haven't used it while…

Downloads
2,636
Likes
281
Rating
4.73
P
PrintablesFrasse16

Filament Spool holder

The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…

Downloads
2,437
Likes
495
Rating
4.92
P
PrintablesTom

InFiDEL - Inline Filament Diameter Estimator (lowcost)

The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…

Downloads
2,424
Likes
676
Rating
5
P
PrintablesNautilus Forge

Filament Spool Shelf system - V2

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Downloads
2,399
Likes
561
Rating
4.98
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Downloads
2,357
Likes
399
Rating
4.33

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Downloads
2,271
Likes
332
Rating
4.94
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Downloads
2,192
Likes
222
Rating
4.27
P
PrintablesSumjai

3D printed Filament Dry Box

A 3D printed Filament Dry Box can be printed on Prusa MK3 About the box : The dry box is designed to contain Prusa & Kexcelled filament. Hope it fits standard spools outside the market. Also, you can put silica gel underneath the filament…

Downloads
2,058
Likes
323
Rating
4.88
P
PrintablesEric T

Inland Reusable Filament Spool v2

Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…

Downloads
1,984
Likes
153
Rating
4.73
P
Printableseds_3d_shop

Filament spool adapter 72mm to 52mm (Sunlu)

+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…

Downloads
1,769
Likes
70
Rating
4.73
P
PrintablesJens Willmer

Simple Filament Swatch

A swatch to compare print color and transparency. This swatch is based on the idea of Jims Filament Swatch . I did not include any fancy test like bridging or overhangs simply because the results have more to do with how the printer is…

Downloads
1,713
Likes
359
Rating
4.96
P
PrintablesCelta

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Downloads
1,691
Likes
626
Rating
4.93
P
PrintablesHaprog

Filament dryer extension for SilverCrest dehydrator

This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…

Downloads
1,661
Likes
254
Rating
5
P
PrintablesJames Harvard

Ender 3 V3 SE Filament Guide

This is a Simple, quick printing Filament Guide, made to bolt under the stock spool holder for the Ender 3 V3 SE/KE using the stock bolts that came with the printer. Printed with PLA @180mm/s, 0.10mm layer height, w/ wall ordering @…

Downloads
1,654
Likes
195
Rating
4.64
P
PrintablesThomas Mergan

Ultimate Filament Sample (with storage box)

I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…

Downloads
1,645
Likes
487
Rating
4.84
P
Printables3DJourney

Ender 3 S1 Filament Swivel guide (supports Capricorn/PTFE tube 4mm OD)

Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…

Downloads
1,543
Likes
285
Rating
4.81
P
PrintablesRayMaker

Customizable Filament Sample Swatch System

Introducing the Customizable Filament Sample Swatch System —the ultimate tool for managing, testing, and showing off your filament collection! This system combines functionality, aesthetics, and flexibility to meet all your filament…

Downloads
1,476
Likes
535
Rating
5
P
Printablesishikawats

Filament Quick Clamp

This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…

Downloads
1,463
Likes
660
Rating
4.76
P
PrintablesGuillaume3D3

PET Bottles to PET Filament - Give Me Bottles ! / GMB Project

Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…

Downloads
1,448
Likes
1,108
Rating
5
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Downloads
1,443
Likes
135
Rating
4.88
P
Printablesmenka

Small spool for filament samples

I needed an easy and fast printed spool for all the filament samples I've recently acquired (I am still quite new to all this and I want to test all the filaments I can get my hands on to). I didn't want to spend days printing, nor big…

Downloads
1,436
Likes
200
Rating
4.85
P
PrintablesJeroenVermeulen

Prusament Filament Indicator PLA PETG meters grams

A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…

Downloads
1,403
Likes
655
Rating
4.94
P
Printables3DPrintM.D.

Simple Universal Filament Clip V3

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design, and now dual sided to allow for even easier use. Version 2, added on May 4, 2021, incorporates a…

Downloads
1,385
Likes
240
Rating
4.83
P
PrintablesEric T

Sunlu S1 Filament Dryer Lid Support

Was able to pick up the Sunlu S1 at a discount, but was annoyed the lid would go flying back every time I opened it and was concerned it was going to shatter. The updated design can be printed without supports. I recommend printing with a…

Downloads
1,335
Likes
192
Rating
4.91
P
PrintablesLopatka

Ultimate Filament Sample Spool

Simply, this is a filament sample spool for 1.75 filament. Is another one needed? Probably not. But I had a specific need that other spools did not have. UPDATE: I was talking to someone that was having difficulties screwing the two…

Downloads
1,272
Likes
181
Rating
4.84
P
PrintablesJames Harvard

Ender 3 V3 SE Gyro Filament Guide

This is a quick printing Filament Guide, made to bolt under the stock spool holder for the Ender 3 V3 SE/KE using the stock bolts that came with the printer. Now with Gyroscopic action. Printed with PLA @180mm/s, 0.10mm layer height, w/…

Downloads
1,261
Likes
133
Rating
5
P
PrintablesTB

Prusament Filament Box

The filament box fits in its dimensions smoothly. PETG for printing is required. I added my gcodes but my recommendation is to create your own gcodes for your used filaments and printer. Print recommendations print cover and box in same…

Downloads
1,227
Likes
267
Rating
4.25
P
PrintablesTrocheHole

Fitting Socket with Filament Guide for Dry Box

Updated ─ [ March 15, 2023 ] Plates to close the holes have been added when changing the position of the fitting socket. [ January 26, 2023 ] A PTFE tube cap has been added. ─ *Printing with flexible materials such as TPU is recommended.…

Downloads
1,213
Likes
340
Rating
4.95
P
PrintablesDukeCGN

Quick PTFE Filament Tube change system for dryboxes

In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…

Downloads
1,213
Likes
200
Rating
4.96

PRUSA Mk3 Filament Guide

The Prusa MK3 has some pretty narrow tolerances for clearance with things that are mounted directly to the frame and the extruder carriage. I designed this to allow for max printing height without the print carriage running in to the…

Downloads
1,210
Likes
111
Rating
4.98
P
PrintablesMichaelQ

Sunlu FilaDryer Filament Dryer S2 PTFE Adapter

With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…

Downloads
1,152
Likes
153
Rating
4.94
P
Printablesalleycat

Bambu Lab X1 Filament Profile - extrudr greentec pro

To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…

Downloads
1,134
Likes
47
Rating
4.67
P
Printablesmp42

Drybox filament guide using PTFE tube

Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG

Downloads
1,071
Likes
175
Rating
4.96
P
Printablesmstoica

SUNLU dryer filament guide

When using SUNLU drybox on top of IKEA Lack enclosure, to make the filament traction smooth I created a filament guide adapter to be used with the lower hole on the case. This was inspired from https://www.thingiverse.com/thing:4833453…

Downloads
1,023
Likes
163
Rating
4.81
P
PrintablesCartoonishNerd

Elegoo Neptune 3 Pro Filament Spool Holder (Spacing Saving Type)

I need to move my Elegoo Neptune 3 Pro printer to a smaller table, which is around 40 cm in depth. However, the original filament spool holder stuck out too much at the rear that I have to pull the table away from the wall to accomodate…

Downloads
960
Likes
67
Rating
4
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Downloads
917
Likes
152
Rating
5
P
PrintablesKOTA CAD

Filament Measure

The Filament measure will accurately tell you how much filament you have left on your spool. Hold the top of the tool that is above the 1000 line at the top of the spool. Each line has a number, and that number tells you how many grams is…

Downloads
897
Likes
120
Rating
4.5
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Downloads
895
Likes
201
Rating
4.89
P
PrintablesCrazy3D

Splicing tool 1,75mm + 2,85mm - filament welding - filament connecting --> You will never have last meters again!!!

Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…

Downloads
882
Likes
233
Rating
4
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Downloads
873
Likes
138
Rating
4.96
P
PrintablesPetour

Filament dryer extension for food dehydrator

Simple ring extension for a food dehydrator which makes it usable as a filament dryer. Suitable for a 32 cm diameter dehydrator. A 90 mm wide spool fits inside the dryer with one ring extension. The rings can be stacked up to get a higher…

Downloads
856
Likes
116
Rating
4.92
P
PrintablesEric T

Inland Reusable Filament Spool

Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…

Downloads
794
Likes
55
Rating
4.83
P
PrintablesPeter Farell

Hellraiser Lament Configuration

Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…

Downloads
793
Likes
135
Rating
5
P
PrintablesKimframes

Prusa MK4 filament guide

Note that you will loose a bit of Z-height using this guide. Dont use it when printing models that require max height from you MK4. New version released https://www.printables.com/model/908576-prusa-mk4-filament-guide-second-edition

Downloads
775
Likes
118
Rating
5
P
PrintablesvmLOGIC

Filament samples (f3d file)

I love Seemonster's filament pattern. They are reduced to the essentials and are not at the same time printer tests, which some others make of it. Thanks for that! :-) But I wanted to design the printed texts myself. No stickers, no…

Downloads
735
Likes
121
Rating
4.96
P
PrintablesVladV

MK3s+ filament cover with PTFE fitting

This is a modified filament cover for the MK3s+ that allows a "reverse bowden" / filament guide setup by installing a PTFE fitting measuring M6x4. Please check that the threaded fitting does not protrude on the other side. That is why I…

Downloads
724
Likes
114
Rating
4.9
P
Printablesaxe

IKEA Lack Filament Pass-through with PC4-M10 fitting

Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.

Downloads
639
Likes
126
Rating
5
P
Printablesclovisd

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

Downloads
623
Likes
150
Rating
5
P
Printablesslothstops

Filament Roller for 1kg and 2,5kg spool

You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…

Downloads
617
Likes
55
Rating
5
P
PrintablesMajsterkowo

Filament Spool Stand with Rollers on Bearings V2.0

Parts needed: 4x bearing 608 Maximum spool width: 110 mm Maximum spool diameter: no limit More info and photos: http://bit.ly/2poCEIN Best regards! Lukasz Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 30

Downloads
616
Likes
55
Rating
4.56
P
PrintablesZS Design

Sunlu Filament Connector ( Rugged Box )

Rugged Box für den Sunlu Filament Connector FC01 Benötigte Schrauben 6x M3 25mm keine Supports nötig Update 22.11.2025 : Rugged Box Sunlu Filament connector Box separat .3mf Rugged Box Sunlu Filament connector Box-Inlay separat.3mf Rugged…

Downloads
608
Likes
143
Rating
5
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Downloads
589
Likes
294
Rating
5
P
Printableszuberio

Print-In-Place Filament Filter

A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.

Downloads
587
Likes
93
Rating
4.78
P
Printablesbraden.eliason

Basketball with inset filament

This is a decorative basketball. Print the two halves, insert pegs into the alignment holes, and glue together. The grooves are designed to fit a 1.75mm filament. You can glue filament in place to emphasize the lines. You could also try…

Downloads
585
Likes
24
Rating
3.5
P
Printableskentnek

Humidity Sensor Holder for Sunlu S1 Filament Dryer

I like the idea of varstef75's sensor holder, however the curved hanger is unnecessary thick and the sensor frame is a bit too small. So, I redesigned it from scratch, using half of this holder instead, which should fit the sensor easier…

Downloads
585
Likes
119
Rating
4.93
P
Printableszarehz

Filament Clip for Prusament Spools.

Filament Clip for Prusament Spools. It clips in the center hole of the spool to hold the clip in place. Print instructions Printed in PETG. The 3mf and gcode have a 0.2mm Elephant foot compensation set.

Downloads
578
Likes
110
Rating
4.96
P
PrintablesElektroarzt

Vacuum helper disc for filament dry bags

Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…

Downloads
546
Likes
82
Rating
4.85
P
PrintablesAirFelix

Remix: Prusa Mini(+) Filament Sensor Holder with Hex Nut

I remixed https://www.prusaprinters.org/prints/24951-prusa-mini-filament-sensor-holder-v2 because I didn't have an m3 square nut available and the thread of the printed m3 square nut was to weak. Hence I adapted the holder for use with a…

Downloads
533
Likes
93
Rating
5
P
PrintablesMatt Boyer

Sturdy base for SUNLU S2 Filament Dryer Box

The Sunlu S2 is great, except the fact it's base is not very wide and the whole thing tips over a lot. At least mine used to. The 2 piece base screws together and clamps onto the dryer box. You'll need 1 M5x30 screw & 1 M5 nut Insert the…

Downloads
523
Likes
105
Rating
4.83
P
PrintablesWittmarch

Filament Guide, Screw mounted, 608 bearing

Filament guide, mounted to surface with screw Uses a 608 bearing Remixed from: https://www.thingiverse.com/thing:3148615

Downloads
507
Likes
89
Rating
4.89
P
PrintablesMarcinPaska

Filament Holder Compatible with Skandis Boards

This is the first prototype of a 3D-printed filament holder designed for mounting on Skandis perforated boards. The model consists of interlocking parts, including a main bracket, a spool mount, and a locking clip. The design allows for…

Downloads
506
Likes
262
Rating
3.5
P
Printablesscubam@xx

Magnetic Hygrometer Thermometer mount for Enclosure or Filament DryBox

This mount is for a round hygrometer thermometer from EEEKit which is very easily available on Amazon. The assembly is very easy with 4 pieces of 8x3mm magnets. Two are clipped inside the mount and two are attached to the plexiglass…

Downloads
502
Likes
117
Rating
4.92
P
PrintablesSteveS42

Filament Hinge Box Generator (OpenSCAD)

Use this OpenSCAD generator to create your own custom size box. Features: Set the length and width of the internal cells Set the number of rows and columns for the cells Set the height of the inside of the cells Set the height and…

Downloads
494
Likes
42
Rating
5
P
Printablesaxe

IKEA Lack Filament Pass-through

Filament Pass-through for IKEA Lack Enclosure Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15%

Downloads
468
Likes
68
Rating
5
P
Printablesritzy

2KG Filament holder extension V2 for Prusa Enclosure

I had issues with the original design in the Original Prusa enclosure. It wasn't wide enough, so the spool wouldn't spin properly and would bind. I also had the ABS split when I put on the original stick, so made that a bit larger on this…

Downloads
448
Likes
27
Rating
5
P
PrintablesFredslund

Printed Multicolor Filament

Print in whatever filament you want. Print with two different colors of own choice. (color change is implemented in the premade G-Code, so when the printer beeps just follow the instructions) The color will vary depending on the…

Downloads
436
Likes
88
Rating
4.67
P
PrintablesNiels

Filament guide for Prusa i3 MK3S+ and Polymaker Polybox drybox Edition 2

Bought the Polymaker Polybox drybox Edition 2 to keep my filament dry. The box comes with some plastic tubing with a 6mm outer diameter to guide the filament to your printer but no way to mount it your printer. Searched a bit for already…

Downloads
434
Likes
62
Rating
4.46
P
PrintablesJames Gurney

Fully printable rewinder for Filament Storage 2026 plus other improvements.

Introduction I love this design. It's great, but I had some issues I needed to address. Thank you to GunplaMark for making my life easy by publishing the STEP files. I've made a number of changes from the original design: The original…

Downloads
427
Likes
79
Rating
5
P
PrintablesSneaks

Two Piece Thread Together 100g Filament Spool

For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…

Downloads
422
Likes
89
Rating
5
P
PrintablesKaaaaaaaaaaaaal

XL Nextruder Main Plate and Idler Lever - (For Flex Filament)

I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…

Downloads
401
Likes
79
Rating
4.25
P
PrintablesArenduk

Audi testing fillament

Hello, here is a file to test the filament and the printer. It is a small audi quattro, fast to print. For a better test I recommend to print with 0.07mm (ULTRADETAIL) .

Downloads
389
Likes
41
Rating
4
P
PrintablesTwirlygrlandMom

Flip Flop Sandal Summer Earring Set - Gcode included for easy filament change two-tone design, dangle earrings for summer

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…

Downloads
384
Likes
89
Rating
5
P
PrintablesArea51

Filament Spool Holder, Prusa Mini Upgrade

With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…

Downloads
382
Likes
80
Rating
4.93