Search results: pm

Sort order

2,700 models

P
Printablespjvenda

Shelly box inline and wago 221 connectors (1Plus, 1L, 2PM, 2.5, Dimmer2)

Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…

Downloads
1,529
Likes
215
Rating
5
P
PrintablesJurriaan

45 RPM record (phono) adapter

Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…

Downloads
1,055
Likes
69
Rating
4.89
P
PrintablesDylan

Snapmaker 2.0 3DP Cooling Fan 5015 Replacement (Updated)

Here is a modification ONLY for 2.5-generation 3DP (2 heat sink holes in front) part of snapmaker 2.0 3-in-one printer. BOM: 5015 Blower 24V 0.1A HX2.54 2Pin (*1) airflow ≥5CFM (the original 2510 fan is 3.6CFM) M3x20 screw (*2) M3x2x5 nut…

Downloads
716
Likes
60
Rating
5
P
PrintablesSkreelink

Snapmaker Laser Bed Square

First off, attribution: This is a remix of the laser bed corner inserts by morpha on thingiverse. Found here: https://www.thingiverse.com/thing:4857543 During my testing, I figured out the true 0,0 of the Snapmaker A350 (at least mine) is…

Downloads
654
Likes
67
Rating
5
P
Printablespjvenda

Shelly box for T&E 3x slots and wago 221 connectors (1Plus, 1L, 2PM, 2.5, Dimmer2)

Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…

Downloads
608
Likes
86
Rating
5
P
PrintablesFH

Shelly Housing (1-/1PM-/PM-Mini)

Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…

Downloads
489
Likes
87
Rating
5
P
PrintablesRossero

Vintage Stopmotion Machine!

This is a flipbook machine! Frame 10 frames of your awesome stop motion creation into this vintage TV and whizz away The model prints in multiple parts that can be assembled without glue or fasteners and can hold 10 Instax Mini photo's…

Downloads
451
Likes
513
Rating
5
P
Printableszbuser

Tippmann A5 Paintball Trigger Assembly

NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…

Downloads
432
Likes
42
Rating
0
P
PrintablesPeopleware

Fein Mahlen mit "ChopMate" kompatibel mit Bosch Cookit (DPGM pending)

Aufgrund des großen Volumens der Arbeitsschüssel des Bosch Cookit ist der Versuch, kleinere Mengen sehr fein zu mahlen nicht immer zufriedenstellend. Mit diesem Zubehörteil könnt ihr das Volumen auf knapp 1 Liter reduzieren. Der Arbeits-…

Downloads
200
Likes
11
Rating
0

16mm 110 film development spiral

Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…

Downloads
129
Likes
21
Rating
0
P
PrintablesPete

Cable wrapper Remix for Greartisan DC 12V 120RPM Geared Motor

Case side and gear modified to work with Greartisan DC 12V 120RPM Geared Motor JSX69-370 6mm shaft Used m3x8 scews for motor mount The part that holds the tape made 26.2mm for 3m super 33+ tape. https://www.amazon.com/dp/B071XG53B4 Still…

Downloads
91
Likes
42
Rating
0
P
PrintablesTheDrJ2006

Playable Record with 45RPM adapter

Best to print if you have access to a record player! (You can find one at Walmart for a fair price!) Video with inline audio: https://drive.google.com/file/d/1xpFUAPId2DzJt-OvRY1q2J6DkTF1eMV0/view?usp=sharing You might have to download…

Downloads
80
Likes
3
Rating
0

HMDuct2 For Snapmaker J1 (using 5015Fan)

This fan duct is designed for Snapmaker J1 parts cooling and heat break cooling. Cooling performance is improved by using a 5015 blower fan. *However, the cooling performance is slightly inferior to the previous version. But, cooling can…

Downloads
75
Likes
17
Rating
5
P
PrintablesHisfantor

Sunset over Tatooine - 45 rpm Record Adapter - Star Wars Miniature Diorama

The Idea: Miniature model of Luke's home on Tatooine maximum possible detail for 0.4 mm Nozzle including: small hill where he looks in the sunset, three barrels to the side, lots of junk around the hut, communication tower hide an up to…

Downloads
63
Likes
35
Rating
0
P
PrintablesClamikra

Bobbin for Gritzner Tipmatic 1037 Sewingmachine / Unterfadenspule

Bobbins for sewing machines are far to expensive if you own a 3D-printer and have the opportunity to make them by yourself. And as if the price is not deterrent enough there are countless different models of those bobbins even within one…

Downloads
63
Likes
4
Rating
0
P
PrintablesERiK004

Vase with motifs SGA ZPM

Pro spodní detaily bude dobré klidné tisknout 0,2 tryskou :-) For the lower details, it will be good to print with a 0.2 nozzle :-)

Downloads
51
Likes
6
Rating
5
P
PrintablesChris Ne

Spoolholder SNAPMAKER

Deutsch im Anschluss. You don't like the original filament spool holder on your snapmaker anymore or you are looking for an ultimate strong holder for 2 filament spools? With this mount, the fight is over! Filament change faster and…

Downloads
40
Likes
5
Rating
0
P
PrintablesJam

Universal stand for hand equipment

Universal stand allows to hold hand equipment like hot air rigid at place. Design allows for flexible position regulation. You will need: 9x M3 inserts (external diameter 4mm, I've used 7mm depth, shorter should be fine) 2x 6mm linear…

Downloads
38
Likes
10
Rating
0
P
Printableswerz 99

Enclosure for RPM-Meter

Simple Enclosure for Arduino Nano RPM-Meter with TM1637 4 digit diplay for my Optimill BF 16 Vario. The small block “Sensorplate” is used to place the sensor in the correct height to measure the spindle speed (RPM). A small bright strip…

Downloads
31
Likes
8
Rating
0
P
PrintablesMariusT

Constant Voltage Regulator for Astro Equipment

This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…

Downloads
29
Likes
11
Rating
0
P
Printablesrj_ruin

American Morse Equipment keyer base and leg strap attach plate

I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…

Downloads
29
Likes
1
Rating
0
P
PrintablesOčko

beware of electrical equipment (no MMU reqired)

Print MK3.5 0.15mm Strukural Prusament Petg Supportn:None Infill_0% Seam position: Random Horihontal shells TOP: 6 , Bottom 6 First layer: 240/85°C Other layers: 245/90°C

Downloads
29
Likes
9
Rating
0
P
PrintablesZworls

Pmini-32Display-injection-molding-lettering

auf anfrage habe ich dieses model geremixt und mit dem schriftzug “original prusa mini” versehen

Downloads
26
Likes
4
Rating
5
P
PrintablesJCote

Top Handle Cover for Sony PMW-500

Replacement part (COVER ASSY HANDLE (TOP)) for the Sony PMW-500 ENG camera. Includes fully functional print-in-place-buttons as well as the sliding button cover. ENG photographers are a rough bunch, and parts of their cameras eventually…

Downloads
24
Likes
2
Rating
5
P
PrintablesGeoMetriKey

Glass Container Replacement Lid round (88mm) (Vtopmart)

This is a lid of the small round Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the clips…

Downloads
23
Likes
7
Rating
0
P
PrintablesMartin Prenger

Wall hook for electric gardening equipment

I needed a good solid hook to hang my lawn trimmer and other small electric gardening equipment on. I designed this hook in such a way that it facilitates equipment with power cords attached at various positions in the hand grip. The…

Downloads
20
Likes
11
Rating
0
P
PrintablesIan Hutchison

Snapmaker 0.5 kg Filament Container

So, why make a 0.5 kg spool container ? Let me tell you. Snapmaker filament has clear spools, so you can look in them and find what you need without opening all the drawers. That's why I designed these. Also they hold much more,take up…

Downloads
19
Likes
0
Rating
0
P
PrintablesDigitalfreak

Snapmaker 2.0 Enclosure Filament Holder Adapter

Snapmaker 2.0 Enclosure Filament Holder Adapter Function: This adapter relocates the filament spool holder on the Snapmaker 2.0 enclosure from the long side to the narrow rear side, addressing space constraints and accessibility issues.…

Downloads
16
Likes
1
Rating
0
P
PrintablesGary

Microcontroller Development Board Expansion Adapter Standoff

A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…

Downloads
14
Likes
2
Rating
0
P
PrintablesGeoMetriKey

Glass Container Replacement Lid rectangular (112.5mm*79mm) (Vtopmart)

This is a lid of the small rectangular Vtopmart glass container. Sadly those are not available as a spare part from the OEM, so we made one. The seal from the broken lid fits and it is just as watertight as the original. You can print the…

Downloads
13
Likes
3
Rating
0
P
Printableswisaphobia

Snapmaker Artisan Bed Holder

It goes on the front of the metal on the bed. There is a square hole for custom mounts. I forgot about the enclosure door though so it is perfect for those without the enclosure. It wont damage the door, just open it every time it goes to…

Downloads
10
Likes
0
Rating
0

Proyecto EscapeRoom UPM IE25.6106

This project is part of the Educational Innovation Project IE25.6106 at the Universidad Politécnica de Madrid. It involves the creation of a custom-designed key that was awarded as a prize in an educational escape-room activity. The key,…

Downloads
6
Likes
0
Rating
0
P
PrintablesPeopleware

Pelletwächter Lite (DPMA 20 2026 000 659) Kontrolle über Pellet Verbrauch und Füllstand der Ascheschublade

>>YouPlaylisttube zu dieser Modell Beschreibung<< >> bilingual/english version availabe as PDF at github Der Pelletwächter ermöglicht es, den täglichen Pelletverbrauch einer Pelletheizung zur erfassen und anzuzeigen. Er warnt bevor die…

Downloads
4
Likes
1
Rating
0

Proyecto Mericoin UPM IE25.6106

This activity is part of the educational innovation project XXXXX, which aims to improve student attendance through the use of physical rewards distributed in the classroom when students complete certain activities. Critical courses or…

Downloads
3
Likes
0
Rating
0
P
PrintablesMILITECH

Makarov PM Fidget Keychain – Slide-Action Toy

A compact and satisfying Makarov-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe,…

Downloads
9,586
Likes
1,830
Rating
4.73
P
PrintablesJace1969
18+

The source marked this model as adult content.

Downloads
3,933
Likes
251
Rating
3.6
P
PrintablesSrin

Snapmaker U1 Top Hat By. Srin

Snapmaker U1 DIY Top Hat By. Srin Snapmaker U1 DIY Top Hat 입니다. This is a Snapmaker U1 DIY Top Hat. 최소한 250mm 출력이 가능한 프린터가 필요합니다. A printer capable of printing at least 250mm is required. https://github.com/srinn/Snapmaker-U1-DIY-Top-Hat…

Downloads
3,129
Likes
604
Rating
4.95
P
PrintablesEA3D
Downloads
3,128
Likes
172
Rating
5
P
PrintablesGur Telem

Snapmaker U1 Toolbox Tray

Model on OnShape: https://cad.onshape.com/documents/4e3090b46d9b709aea63f673/v/b97632534c31523e887014c7/e/ff16d7d87dbe54cd935d3aec I printed the model with black PETG. The model needs to be placed at 45 degrees angle to fit. 10% infill…

Downloads
3,079
Likes
244
Rating
4.86
P
PrintablesGonzoStrange

PMAG 30 Style AR .22lr Ceiner/CMMG Conversion Magazine

PMAG Style AR 22lr Magazine 25rd Top is easily replaceable in case of damage. I included 2 styles of followers. The standard one which is the style my older Black Dog machine mags have. Follower 2 is similar to the CMMG follower and will…

Downloads
3,058
Likes
276
Rating
5
P
PrintablesCyberdyne

Snapmaker U1 Top Cover with Vent Opening for IKEA Samla and Walmart Sterilite v4

This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…

Downloads
2,827
Likes
451
Rating
4.95
P

PTFE adapter for Snapmaker U1

CZ: PTFE adaptér pro podavač tiskárny Snapmaker U1 - Bez demontáže originálního krytu podavače - Tisk bez podpor - Tisk bez závitu pro PTFE konektor - Výška vrstvy 0.16mm - Tryska 0.4mm - Čísla vstupů v modelu - Materiál PLA Doporučuji…

Downloads
2,577
Likes
338
Rating
4.93
P
PrintablesAviation Design

1:400 Ground Service Equipment (GSE) For 1:400 Airports And More

Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…

Downloads
2,074
Likes
48
Rating
0
P
Printablesthinbegin

Pa-110 : A 110/16mm film development reel v2 (Paterson-fit)

This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…

Downloads
2,050
Likes
113
Rating
5
P
PrintablesAviator67

Saturn V - Launch Umbilical Tower (LUT) - Additional Equipment - 1:60 Scale

Please make sure to download the “ All Model Files ” and the “ All Other Files ” zip files so you get all of the .stl's and also the .pdf files that include the instructions and equipment placement drawings. (Link is near the bottom of…

Downloads
2,002
Likes
249
Rating
5
P
Printableswildtang3nt

Auxiliary Fan Cover - Snapmaker U1

Cover your fan in style with the Auxiliary Fan Cover for Snapmaker U1! Featuring a Snapmaker logo, and hexagons (the bestagons).

Downloads
1,988
Likes
267
Rating
4.94
P
PrintablesAMelo

Snapmaker U1 IKEALLER top cover

UPDATES AND USER SUPPORT ARE NOT LONGER PROVIDED IN PRINTABLES - NOW FIND THEM IN: https://space.snapmaker.com/en/model/29016-u1-ikealler-top-cover#profileId-43941 https://makerworld.com/en/models/2494052-snapmaker-u1-ikealler-top-cover…

Downloads
1,883
Likes
333
Rating
4.89
P
Printablesbig channel

Subspace Tripmine (roblox)

WARNING: HIGH EXPLOSIVE DEVICE. When triggered, this devastating weapon rips a gashing hole in the fabric of reality - subsequent spacetime reification results in a large explosion. USE: Drop mine. Once the mine stops moving, it will…

Downloads
1,784
Likes
61
Rating
4
P

Snapmaker U1 – PTFE Tube Radius Guide (Dryer to Feeder)

CZ: Tento držák PTFE trubičky jsem navrhl jako řešení pro bezpečné vedení filamentu ze sušičky do podavače Snapmaker U1. Umožňuje vést PTFE trubičku v kontrolovaném radiusu, takže se neláme, nekrčí a nezpůsobuje zvýšený odpor při podávání…

Downloads
1,729
Likes
258
Rating
5
P
PrintablesGur Telem

Snapmaker U1 Top Cover Modding for IKEA SAMLA 45L

Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…

Downloads
1,653
Likes
210
Rating
4.92
P
PrintablesXykit

Snapmaker U1 Filament Spool Adapter

This spool adapter model is designed to work with the Snapmaker U1 3D printer. The adapter will accomodate any spool with an inner diameter over 60mm. Dimensions: Inner diameter - 55mm Outer diameter - 60mm Height - 75mm Overall Width -…

Downloads
1,647
Likes
118
Rating
5
P
PrintablesCNC Kitchen

BumpMesh.com STL Texturizer

Try out BumpMesh.com ! BumpMesh is a free, open-source, browser-based tool for applying custom displacement textures to your 3D models - no account, no software install, and no expensive licenses required. Simply load your STL, OBJ, or…

Downloads
1,622
Likes
2,371
Rating
4.86
P
PrintablesMaciaIT

Film Development Tank 35mm 250ml

After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…

Downloads
1,517
Likes
253
Rating
4.83
P
Printablesboothyboothy

Pill Box with AM\PM Apertures

Update:01_11_18 Uploaded f3d file. Update:17_08_18 New version available at the following link: Pill Box with AM PM Apertures V4 - It's More Personal! by boothyboothy | Download free STL model | Printables.com Circular Pill Box with:-…

Downloads
1,476
Likes
217
Rating
4.75
P
PrintablesMickey666Maus

SPM - 3D Printed Spherical Parallel Manipulator

This is a WIP of my end effector for a robotic arm that I am building... Since it translates the rotation of three parallel discs into a spherical motion, it is useful for quiet a few joint types. This is by no means a finished design,…

Downloads
1,454
Likes
203
Rating
0
P
PrintablesMumiell

PMN - 3 (Antipersonnel Landmine)

This mine is a continuation of the PMN mine series. It is similar in appearance to the PMN-2 mine. The main difference is the screw on the bottom of the mine, which can be used to adjust the self-destruct. The PMN-3 mine is NOT a…

Downloads
1,405
Likes
72
Rating
5
P
Printableswildtang3nt

Snapmaker U1 Gridfinity Hotend Holder

A Gridfinity-compatible hotend holder remixed to fit Snapmaker U1 hotends . This version is designed for fully assembled hotends and keeps them organized, protected, and quick to identify and grab from your drawer. Included sizes (current…

Downloads
1,400
Likes
272
Rating
4.91

Snapmaker U1 Spool Adapter

Adapter für größere Spulen am Snapmaker U1

Downloads
1,377
Likes
178
Rating
4.93
P
PrintablesSpokaneDudeist

Full week Am Pm Pillbox

A print in place hinged pill box for a full week, both am and pm Don't have a 3D printer? no problem. follow this link to have one printed and sent to you. The Dudes 3D Printing

Downloads
1,374
Likes
104
Rating
4.71
P
PrintablesScambler3D

AR PMag Magazine Rack

This is a remix of the magazine holder by moorefoodnow . It uses a heavy duty magnet to attach to your safe. The magnets are found on Amazon . Fully charged magazines are easily held in place with these magnets. Meant for Gen 2 PMags but…

Downloads
1,340
Likes
232
Rating
5
P
PrintablesDarien

Snapmaker U1 Interior Grille Covers

8/15/26 Update: I've since learned that the grille on the bottom isn't for cooling any electronics—It's just a hole that goes through the bottom of the machine for no apparent reason. Added a solid cover print profile to help retain heat…

Downloads
1,312
Likes
173
Rating
4.94
P
PrintablesDimitris

Snapmaker U1 Bed Manual Level Tool

In certain cases, you may need to manually level the print bed of the Snapmaker U1. Fortunately, this is done via the firmware on the display. You need to turn a knob at each of the four corners under the bed, following the instructions.…

Downloads
1,289
Likes
153
Rating
4.95
P
PrintablesJustDoItSascha

Snapmaker U1 YATC - Yet Another Top Cover

Snapmaker U1 YATC – Yet Another Top Cover The official Snapmaker U1 top cover won’t be available for a while, and most community designs I found rely on custom-cut acrylic windows (accurate, but expensive and annoying to source). So I…

Downloads
1,263
Likes
213
Rating
4.63
P
PrintablesBONK BOY

Removable Gas Masks For Dummy 13 (PMK-4)

I've seen a couple of gas masks for Dummy 13 floating around on the internet, but they looked kind of … meh. So I made my own! Designed for 100% Dummy 13s, but like all of my other models you can scale it up as much as you want! FEATURES…

Downloads
1,256
Likes
212
Rating
5
P
Printablesmakemeone.xyz

Snapmaker U1 - PTFE Adaptor for Autofeeder - minimal print time

Why and what for This will allow you to connect 4mm OD (standard size) PTFE Tubing to Autofeeders of Snapmaker U1. You can customize all the colors. Discussion topic -…

Downloads
1,235
Likes
230
Rating
4.86
P
PrintablesPrintedByMark

Snapmaw from Horizon Zero Dawn

Introducing the Snapmawfrom Horizon Zero Dawn! This machine is to scale with the official board game and stands on a 80mm base. It is intended to be printed in one piece with the base separate. All credit for character design goes to…

Downloads
1,184
Likes
195
Rating
5
P
Printablesbart921

Turbo siren whistle 30k RPM

Print turbine upside down to avoid sagging Before assembling, remove excess material and surface irregularities Use silicone oil (but not silicone grease) to lubricate axis. Requires running-in(like new engine). For the micro chain check…

Downloads
1,163
Likes
190
Rating
4.86
P
PrintablesSupafly

Panda Breath Snapmaker U1 Remix

Since the original assem,bly instructions for the panda breat tell you to raise the assembly off the ground and I did not want to clamp the assembly with too much force I have upgraded the original designe by adding supports. On the…

Downloads
1,155
Likes
158
Rating
4.95
P
Printablesdavorin

Shelly Plus 1PM Junction Box

This is a simple wall box measuring 80mm x 80mm for the Shelly Plus 1PM to be wall mounted. Two M16 or PG9 cable glands can be fitted for cable inlet/outlet. For screwing the lid onto it use 4 x M3 x 8mm counter sunk screws. Included also…

Downloads
1,152
Likes
166
Rating
5
P
PrintablesEl Flecko

Snapmaker U1 Improved PSU and Motherboard Cooling - with CAD-Files

Fan Duct for the PSU and the Mainboard of a Snapmaker U1 to improve the cooling and isolate the cold air flow from the chamber. I also publish my CAD (FreeCAD) and STEP files for further remixing Printed with ABS for heat resistance.…

Downloads
1,138
Likes
266
Rating
4.43
P
PrintablesJDM Designs

Stargate Zero Point Module (ZPM)

I remixed the design to print the main body as 1 piece so that no line would be visible when illuminated. I designed a hidden switch into the base to turn it on and off. (the center red crystal) I added an interior mount for the lights.…

Downloads
1,117
Likes
216
Rating
5
P
PrintablesDarien

Snapmaker U1 Poop Deflector

The Snapmaker U1 has a bad habit of throwing its poop over the edge of the bucket. This deflector connects to the nozzle wipers and creates a barrier to help guide the waste filament into the bucket. Features: Can be printed without…

Downloads
1,066
Likes
134
Rating
4.9
P
PrintablesJust Baselmans

Snapmaker U1 build plate holder

Both a 2, 3 and 5 slot snapmaker U1 build plate / bed holder

Downloads
1,053
Likes
131
Rating
4.83
P
Printablesaardvark

Snapmaker U1 tool tray - no supports - remix

Basic tool tray for most of the tools that came with the Snapmaker U1 printer. As per the original model by Gur (which the model I remixed is a remix of), use the screws that were holding the buildplate down to attach this to the holes at…

Downloads
1,028
Likes
82
Rating
4.83
P
PrintablesMumiell

PMN - 4 (Antipersonnel Landmine)

Currently very frequently used anti-personnel mine in Ukraine. It consists of five parts. I printed from PLA and PETG. The ring around the mine, which is otherwise made of metal, I printed from PETG to make it more resistant to mechanical…

Downloads
1,017
Likes
49
Rating
5
P
Printableshalsi82

BYD Sealion 7 - Cover for DPMS (Driver Assist System)

Print it with TPU and it will not scarf your camera window. It holds itself without the need of any glue or doublesided tape.

Downloads
1,004
Likes
11
Rating
5
P
Printableshrodrig

Top Surface Ironing Test - for Snapmaker U1

Modified Orca Slicer settings for Snapmaker U1 printed with eSun PLA+ and PETG

Downloads
992
Likes
82
Rating
4.75
P
PrintablesCadeyzDad

AR 223 556 PMag Race Mag Pouch

Race Mag Pouch for 223 556 Pmags for ELS mounting system Update 11192023 Added Strengthening Ribs to the mounting side of the pouch Reduced mounting height by 1mm Made insert holes 0.2mm smaller Update 01152023 Got some feedback about the…

Downloads
975
Likes
174
Rating
5
P
PrintablesJust Baselmans

Snapmaker U1 Light Weight No Support Top Cover IKEA SAMLA 45L

The community has created some incredible, creative solutions for the Snapmaker U1 enclosure. However, most are quite bulky and require significant time and material. Born out of a need to finish a project with a nearly empty roll of…

Downloads
956
Likes
125
Rating
4.67
P
PrintablesFrank Wolters

Shelly 1 PM plus + Shelly Dimmer 2 mount for Gira 55

A bracket for mounting Shelly 1 PM plus, Shelly Dimmer 2 on back of Gira System 55 Switches and Sockets Shelly Plus 1, Shelly Plus 2PM and Shgelly Plus i4 should also fit but is not tested…

Downloads
945
Likes
51
Rating
5
P
PrintablesAMelo

IKEALLER toolbox for Snapmaker U1 by @amelo

UPDATES AND USER SUPPORT ARE NOT LONGER PROVIDED IN PRINTABLES - NOW FIND THEM IN: https://space.snapmaker.com/en/model/28480-ikealler-toolbox-for-u1 https://makerworld.com/en/models/2569138-ikealler-toolbox-for-snapmaker-u1-by-amelo…

Downloads
942
Likes
140
Rating
4.83
P
PrintablesGigaBagel

Life-size subspace tripmine prop

The subspace tripmine from roblox, used by Taph in the game forsaken. The core can be strung to the shell by using thin wire, and you can scale it up or down depending on how big of an explosive you need (It does not really explode it is…

Downloads
924
Likes
22
Rating
5
P
PrintablesDennis Renken

Snapmaker U1 Toolbox Tray - Repaired & Optimized for Snapmaker U1 Starter Spools

This remix is a technical refinement of the original toolbox tray, specifically tailored for Snapmaker U1 users. Key Enhancements: Fixed Geometry: Repaired 82 non-manifold edges for error-free slicing. Ultra Material Efficient: Reduced…

Downloads
907
Likes
80
Rating
5
P
PrintablesMSAP

Snapmaker U1 Bottom Tray

Snapmaker U1 Bottom Tray Front/Rear The front tray is used to discard brims and other residues, while the rear tray is designed to catch filament that occasionally falls to the bottom during multi-color printing.

Downloads
906
Likes
202
Rating
4.91
P
PrintablesKaot93

Parkside PMRDA / PMRA robotic mower Spikes

I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…

Downloads
898
Likes
65
Rating
5
P
PrintablesService Process

Snapmaker U1 Improved Power Supply and Motherboard Cooling

This is my first Model for the 3D Printing community as it's been take take take for me, for years !!! So this is my attempt to give something back. You're Welcome !!! OBJECTIVE The intent was to silence the power supply Fan and cool the…

Downloads
876
Likes
194
Rating
4.8
P
PrintablesKVelec4326

Snapmaker U1 Feeder Bottom Feed Rotation Block

This adapter block allows for the filament feeders on the side of the Snapmaker U1 to be rotated so that the filament feeds in from the bottom and out the top. This allows for better placement of a dry box or filament spools under the…

Downloads
842
Likes
157
Rating
5
P
Printablesjkaterenchuk

Snapmaker U1 Top using Walmart Sterilite 55L bin

The popular Ikea Samla bin was not easily available in my area, but it was easy to purchase a Sterilite 55L/58Qt plastic bin from a local Walmart. I used the original model from the enclosed link and remixed it to fit the Walmart…

Downloads
821
Likes
117
Rating
4.88
P
Printablessevenalive

Multicolor Majora's Mask - 8 colors for Snapmaker U1.

This is a Snapmaker U1 profile for a remix of Majora’s Mask, designed specifically for 4 color toolchanger printers like the Snapmaker U1. The original remix placed multiple models on the same plates, which resulted in excessive filament…

Downloads
814
Likes
122
Rating
5
P
Printablessmc

Pmag Style Dust Cover

Printable version of a dust cover for Magpul AR-15 Pmags Included a .step file if anyone wants to improve it! I print with it on its side, 100% infill, concentric walls and infill. I use .2 layer height but I think most any will work.…

Downloads
814
Likes
84
Rating
4.8
P
PrintablesCyberdyne

Snapmaker Orca Full Spectrum Test Objects

Full Spectrum is a fork of the Snapmaker Orca slicer. It includes support for virtual mixed-color filaments designed for the Snapmaker U1 multi-color printer with independent print heads. https://github.com/ratdoux/OrcaSlicer-FullSpectrum…

Downloads
800
Likes
85
Rating
4
P
Printablespbilek

Philips OneBlade Stand, equipment storage and charging dock

I was looking for some proper stand for my new OneBlade. Originally I was inspired by this thing by xenotrim: https://www.thingiverse.com/thing:2986584 Thank you xenotrim! https://www.thingiverse.com/xenotrim/about It was not exactly tha…

Downloads
794
Likes
171
Rating
4
P
Printableschwiede

Shelly 2PM Gen. 3 DIN Rail Mount

This compact 18mm (1 TE) mount is specifically designed for the Shelly 2PM Gen. 3 , ensuring a good fit. It allows you to orient the Shelly's connections to face forward for easy access and wiring. The mount provides a secure grip on the…

Downloads
785
Likes
51
Rating
5
P

Snapmaker U1 First Layer Test

Have first-layer adhesion problems or get a new Snapmaker U1? Use this model to test it with for your Snapmaker U1.

Downloads
781
Likes
81
Rating
5
P
PrintablesCryostatic

Snapmaker U1 - 180 Degree Door Hinge

The door on the Snapmaker U1 doesn't open much further than 90 degrees by default, and I wanted less restrictive access, so I put together this 180-degree door hinge. It uses compression-style fittings to hold the glass door to the hinge…

Downloads
779
Likes
220
Rating
4.71
P
PrintablesDominik Knoll

Snapmaker U1 Bowden Clip

German: #Beschreibung Der Bowden Clip für den Snapmaker U1. Ideal zum Ersetzen bei Defekt oder um die vorhanden Clips zu erhöhen. Druckeinstellungen Druckmaterial: PETG (für offenen Drucker) - (ASA für Geschlossen) Layerhöhe: 0,2mm…

Downloads
778
Likes
166
Rating
5
P
PrintablesCyberdyne

Snapmaker U1 Build Plate Holder for IKEA and Walmart boxes

If you have a Snapmaker U1 and you use an IKEA Samla or Walmart Sterilite box as a top cover this might be for you. This build plate holder should work with most of the top cover adapters out there. I even made extra high versions if your…

Downloads
769
Likes
130
Rating
5
P
PrintablesM K

Magazine Coupler Pmag Gen 3

Working progress, will do some prints to bring it as low as possible. Remixed the Hochul Magazine Extensions File by @nnicclaascoupler to make the coupler, he did a great job, so the connection fits perfectly. Beware, if you connect two…

Downloads
766
Likes
86
Rating
4
P
PrintablesDarien

Snapmaker U1 6mm PTFE Removal Tool

Tool to make removing the PTFE tubes on the Snapmaker U1 (or any printer with 6mm PTFE tubes) easier.

Downloads
757
Likes
127
Rating
5
P
PrintablesGary

Stargate ZPM build

This is a 3D print model of a ZPM I made some time ago. I made this model so it could neatly fit and didn't need any print supports. Some gluing is required. I've included 2 parts for the center core made to accommodate a trinket MO…

Downloads
746
Likes
160
Rating
0