16,219 models
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Replacement toothpick for the small Swiss Army Knife. The g-code file is .05mm Ultra-detail for the Prusa Mini + in PLA and takes about 7 min to print. In the Cover Photo, the green one furthest away is the print. The white/yellowish one…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
We purchased a secondhand Hi Ho! Cherry-O game... and the spinner was missing! This is the first model I have ever created– I used Fusion 360 and PrusaSlicer. Parts can be superglued together or pressure-fit– I recommend first gluing the…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
I broke the frame of my glasses a few months ago, and I've been wearing this 3D printed frame since then. I'm completely blind without glasses so being able to print my own frames make a big difference. Fusion 360 files included so you…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
The clip on my Skoda Fabia has broken for the second time. I drive on a route where the sun often hits from the side/front. The cover, metal clip, and screws are reused from the original. The model requires a support structure and should…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
My daughter is a big fan of the Monster High dolls, and sometimes she manages to brake their legs, arms or hips. Daddy to the rescue to fix them :) This is a knee articulation replacement should fit all (?) with some preparations. Print…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
Print approx. €6.87–€8.39 excl. taxPreliminary estimate for one variant
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
This is a replacement part for the board game trouble/frustration! I printed using 0.2mm layer height and stock PrusaSlicer PLA settings.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Swiss Army Knife Replacement Toothpick for Large Pocket Knife. For Small Swiss Army knife replacement toothpick see: https://www.printables.com/model/321610-toothpick-replacement-for-small-swiss-army-knife…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for one variant
Slightly inspired by this model (https://cults3d.com/en/3d-model/naughties/foreplay-dice), except when you try print text that is embosed to an angled side of the dodecahedron it looks like shit unless you make the dice really huge. Only…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Print in ASA with 3 layer raft, draft shield 2 loops, supports and 15% infill.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
Printed in ABS with 100% infill
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is a custom-designed replacement clip for the Black Diamond Cosmo-R 350 headlamp. It serves as a direct replacement for the original clip that holds the tilting part of the headlamp in place. Features: Nearly identical to the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I made this in Fusion 360 to fix the broken button on my Air Canada carry-on, and avoid having to buy a new one. Printed in PETG on Prusa mini, using supports underneath to print “upright” as it would be installed. I recommend printing…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
My original Luba AWD was losing traction on my thick Saint Augustine grass so I designed these turf tires instead. I went through five different iterations and landed on this as the best design. I have been using them for over a year and…
Print approx. €10.50–€12.83 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I created this model because I took the seat out of a 06 Eclipse from a junkyard to put on my sim rig, and the seat back panel was being held on by a couple pieces of strings. When I took it off, I found that every hook(there's 5) that…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
The combined power and volume switch of my Shokz OpenRun Pro 2 stopped working. First it lost its tactile click, then it ceased to function entirely. I assume the two little plastic plates beneath the rubber got dislodged. I carefully…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Did your delicate porcelain sugar spoon snap in half because of your disgustingly strong hands? Worry not for now you can print a replacement which is much more durable!
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
scraper with replaceable blades with magnetic grip on metal surfaces and hexagonal design
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
While in the process of creating my updated Stargate-themed game, I came upon the need for a “game spinner” to allow selection of 1-12 (just like using a pair of dice). I added the base included here to allow it to be used in any board…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is a replacement for the original SKÅDIS “ Container with Lid ” item (803.359.09). The commercial version might fall out of the holder as you pull it out. This version provides a sturdy holder for the bin. Printing Note: Print…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
These models are replacement parts for the Tinkertoy Construction Set . I've designed them using an existing set as a reference. I may be missing a few parts that weren't in my set. Parts included: Rods in 5 sizes. The filename has a…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
PARKSIDE 150mm Clamp Jaw Replacement To make this part stronger I printed this with 4 perimeters, 5 top and bottom solid layers and 60% of infill. Picture shows how it should be placed on the bed of printer. Material: PET-G, ABS, ASA etc.…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
Customizable backpack replacement part, can be personalized with your name using Fusion, easy to print. Note: Make sure the selection filter is set to ‘All’ 20% infill or more PLA or ABS.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
The original model uses an extender to mount the silncer on the barrel. Well when kids are playing with… it’s only a question of time till the extender breaks…. So i made a remix to mount the silencer directly on the barrel. Looks nice…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Surface model of the T7 replisome complex as described in Gao et al., Science 10.1126/science.aav7003 (2019). All components were printed separately and glued. Proteins subunits were printed in PLA, while nucleic (DNA, RNA, and dTTP) in…
Print approx. €2.88–€3.53 excl. taxPreliminary estimate for one variant
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for PETGSource material: PET
This little cog from the Emsa Basic Salad Spinner seems to brake quite easily: … so I made this replacement part. Works well again, don't know yet how durable it will be… Printed in PETG, supports are needed like shown in the 3mf file.…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
I created a replacement for my old omnitronic dual cd-player. Maybe it fits to some mixers too, if not the step-file can help to adjust it.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
A simple replacement for the wooden score marker for the boardgame Ticket to Ride. As shown on the photo in black.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is 1 side of Ethan A's Bull Elk Rack Antlers model. I have scaled it up and cut it into 3 pieces. As you can see in the picture, I printed one with Red, White, & Blue for the 4th of July. Each model uses pins to help reconstruct the…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
You could buy a genuine OEM replacement knob for $5 plus shipping and handling and wait for a week for it to be delivered. Or you could print one right now for a couple of cents. That expensive 3D printer is going to pay for itself in no…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Needed a replacement for the wand portion of the Clorox Toilet Wand system (https://shop.clorox.com/products/clorox-toiletwand-system) This is in 3 sections. 2 of the sections screw together with the third part used to reenforce the…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
Replacement keys for antique United States Postal Service and National Park Service rotary counter locks. Models made from original keys. Scans of original keys provided for reference. There are newer models of the USPS rotary counter…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
INFO The model is based on this holder: Usually the holder is sold with the bidet as a set, but I only want the holder. So, I decided to print a replacement to lower the cost and to challenge myself with 3D modeling and gain more…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for PETGSource material: PET
This model replaces the female buckle piece on my Northface backpack. It may be compatible with other brands that utilize a 15mm strap as well. It is printable without supports when printed vertically on its “legs” (the STL should be in…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Iphone 17 Pro Replica sized as the original
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Replacement drawer track guide for a Bassett dresser. A very niche part, but hopefully somebody can find some use for it. Bought this dresser 2nd-hand, and one of the drawer guides (shown in white) was already broken. A second guide broke…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
A replica from the coin of the german TV Show "Wer stiehlt mir die Show?", by ProSieben. Diameter of the coin: 150 mm Height of the coin: 10 mm Material: PLA (Copper) Print Time: 4h04min. (with 0,3 mm layer height)
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
I have the ikea Latt table and chairs set for my kids and i broke the seat when sitting on it (i guess I am too heavy for it when the seat was wet from a spill). I was unable to find a replacement seat for the chair from Ikea so I decided…
Print approx. €13.62–€16.64 excl. taxPreliminary estimate for PETGSource material: PET
Another fireplace charger for smaller phones like the iPhone 8, second and third gen SE’s. Glue the surround to the hearth and the bricks together. Slide the mag charger into the dovetail into the hearth.
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
This is a replacement part for the tentioning part of the popular D'Addario guitar tuner. I Hope to help all you guitarists and bassists out there who have a broken tuner lying around. I did lots of tests with different materials, nozzles…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Use case In combination with easy-to-get and nicely prices suction cups, this part replaces the Garmin suction cup holder for their navigation devices with 17.3mm ball joint. The original Garmin suction cup holder is not great and falls…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Update: This was my first self designed part and it is still in pretty good shape and works very well after nearly two years in service! With the red bracket broken, that holds the arm of the excavator in an upright position, fun was…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
I remixed this Y axis end because lets just say the MK2's Y-corners are just a PITA, so with this upgrade you can throw away the printed corners and the 8mm rods that come with it. This remix includes a built in belt tenisoning system If…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Why I needed a replacement for the Duct / Nozzle on the top of my TaoTronics-Ultrasonic-Cool-Mist-Humidifier . The Duct does not lock in place but just sits inside a pocket on the top of the humidifier. Because of this deign mine fell out…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
These are some replacement parts for the Hape Master Workbench (E3000) and Master Builder Set (E3081) . You can see my models alone in one picture, and my models alongside the originals in the other picture. Printing instructions Print…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
The feet on my box fan broke. So I took some photos, imported them into Fusion 360, took a bunch of measurements with a micrometer and boom. Replacement Feet on Demand. After I printed the first one I realized it was a little loose so I…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Glass magnifier replacement frame 100mm. Just printed both parts, base and ring with PLA. Insert the glass lens into the base. Lock it by firmly pressing the ring against the glass lens. Warning : take care to insert the ring with the…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Printing | Recommend PETG or ABS, print hot, lots of perimeters and solid. Press onto the shaft and go. No supports required. I made these almost 4 years ago and they've survived several epic trips since. Hope you find them useful!…
Print approx. €1.21–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
The first two times I tried to use this tool it became stuck onto my tool head so stiffly that I had to rip apart the model to get it off. This could be because I was using a fairly stiff/tough PLA, but regardless of the reason it was…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for one variant
Fits perfect on the 2002 Jeep Wrangler stock CD player. The .scad file has parameters you could adjust for similar push-button, spin-to-select type knobs (as often found on a printer's LCD).
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
ASA, 4 perimeters, 20prc infill, 6 full bottom/top layers, with supports.
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for one variant
My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
This is a replacement top clip for a Cygolite Metro handlebar bracket. The plastic on my original clip broke so I designed and printed this replacement part. Note that this is only the top section. It does not include the clamp that…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This model includes replacement buttons that you can glue in your damaged Smart key fob. You can get replacement plastic cases relatively cheap on eBay but then what would we use our 3D printers for ;) It is parametric and can be adjusted…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
As a user of the WD MyCloud EX2 Ultra network drive, I was very disappointed with the noise made by the very small internal fan. At night the noise was totally unacceptable, especially when the drive was performing a sync or a large file…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for one variant
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
Print approx. €3.21–€3.93 excl. taxPreliminary estimate for PETGSource material: PET
This Christmas stocking holder is suitable for flat tabletops, stairs, or fireplace mantels. Printed in PETG.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement jaw for the Wolfcraft Spring Clamp FZ40 and FZ60. To install the jaw just remove the black pin by pressing it out with a small screw driver. The print needs no support. I printed it with 0.15mm layer height and a…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
Dump everything from your pocket in the tray with a filter. The filter with holes would drop your coins at the bottom and keeps your keys and larger items on top. Designed this for Printables Catch-All Trays contest. You can design your…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Love Letter Favor Token — 3D-Printed Replacement (Single-Color) A clean, durable single-color replacement for the Love Letter favor/affection token. Prints fast, stacks neatly, and upgrades table presence without needing color swaps or…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for PETGSource material: PET
I like fountain pens. My current favorite is the Lamy Vista Fountain Pen . The one drawback is that I write in two colors – blue (or black) and red. But the pens only come with a black finial (the end part of the cap). So I…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Desc Lost the tightening nut on a Behringer PM1 in-ear monitoring pack. Couldn't find one at the hardware store so I just made one myself Instructions Use 100% infill and as small a layer height your printer can manage to print the…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This 3D model replaces the original tray holder part for the Kinderkraft Enock high chair. Perfect for fixing a broken or missing holder with better stability of the tray (tighter tolerances). Recommended material: PETG (for better…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
This is a replacement gear for a smart blind automation motor. I bought several of these motors and after 5yr the plastic gear inside each has started to disintegrate and crumble. The stacked gears in the motor are mostly metal except for…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This part is a replacement for the wheel area covers on the Exway Flex board. The screw on perfectly and look identical to the original. The gcode files are at 0.20mm layer height and have a few supports on the screw holes that can just…
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for PETGSource material: PET
What's the point of having a multi-color printer if you don't make it's parts have Prusa colored text, lol?
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
This is a simple replacement for the Contigo™ AUTOSEAL® West Loop Stainless Steel Travel Mug as there doesn't seam to be a way to buy replacement lids here in Canada. This has no moving parts so it doesn't autoseal. You'll also need a…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant
The provided knee supports for the HBCE 990 cello don't make it feel like a real cello. I was unable to keep a good posture while making this cello rest on my knees, maybe due to my legs which are smaller than average. This replacement,…
Print approx. €9.37–€11.45 excl. taxPreliminary estimate for one variant
One of my Polarpro leg extenders broke and Polarpro no longer sells them. So I made a replacement. This leg extender slips onto a front leg to raise the Mavic 2 up off the ground. You'll still need the rear leg extenders. These extenders…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
Náhradní nožky pro M1T290 / Replacement M1T 290 feet Tiskové parametry / Print paramers: Podpory / Supports: Pouze na podložce / Heatbed only Výplň / Infill: 30%
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Replacement stand for a small Star wars Armada ship with a broken pin. I would suggest gluing the ship to the stand or to use a small hair tie to hold it together.
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
It snaps in like the original one and you can use every 90mm fan. i tested it with the Noctua NF-B9 PWM and it‘s 1-2°C cooler and super quiet. (Open frame consition) You sould use at least PETG. happy Printig
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
