Counting matching models…
This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
First, This is all Tinkerheart's design… with a twist. This is also my first print in place. I combined Tinkerheart's holder with Tinkerheart's clip with a swivel so the stethoscope stays level with motion. The clip, as stated, is good…
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
The scope mounts allow you to quickly and easily find the proper height. The mounts fit on an 11 mm dovetail and fit scopes with a tube diameter of 1" (25.4 mm). Have now added the mounts in 30 mm as well. The heights correspond to those…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
This is an easy to print JWST model with mirrors and support structure as they appeared during assembly and testing prior to being covered with protective material for launch. My way of teaching myself to use reference images for 3D…
Print approx. €8.34–€10.20 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Hi! We are from Ukraine!!! This is a low cost periscope for the Ukrainian army by Ukraine, to help Ukrainian soldiers. If you can and want to help us to print models for this device, please contact me (agree on quantity/time/delivery)!!!…
Print approx. €7.10–€8.67 excl. taxPreliminary estimate for PETGSource material: PET
I made this gyroscope looking puzzle to enter the Brain Teaser Puzzles contest. You can play with the dimensions (parametric table) but be careful with the width on small diameters because the “key” can be blocked and the puzzle unable to…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
This is a stylized version of the JWST with an enlarged primary mirror with enhanced curvature, since that is the most striking detail of the telescope.
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Sunshade for a rifle scope. Moreover, it adds a protection for a scope lens and a nicer look :) Uploaded model (both versions) has these parameters: inner diameter: 57,0 mm outer diameter: 66,0 mm I use this sunshade for my rifle scope…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for PETGSource material: PET
Added folding print-in-place arms. Results in a cleaner print and a more accurate model!
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
The design is sturdy and saves about 800 g compared to a metal version. The dovetail uses the Losmandy mount points (3'') of the Celestron AVX mount and has alignment stops for easier mounting at reproducible positions. The parts are…
Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET
Make it a bit easier to stand your Hadley on the ground without the worry of tipping over. This is a remix of basically the same thing by emaxduck, however I found that model to be too small to stick onto a ½" aluminum rod. Have to assume…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple adapter to allow you to attach your Fujifilm mirrorless camera directly to your telescope with a 1.25" eyepiece. Printing it slower to ensure accuracy is probably best. The locking pin does work. It's a snug fit and so…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.87–€4.73 excl. taxPreliminary estimate for one variant
This is a simple mount for a 5.5mm endoscope camera for the Prusa Mini. You can find these for around $20 or less on Ebay/Amazon and can be hooked up to a Raspberry Pi or PC. Check the size before as most of the "standard" endoscope…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
The standard holder from https://www.ebay.nl/itm/Universal-Mobile-Phone-Adapter-Holder-Mount-Telescope-Binocular-Spotting-Scope/222674716928 doesn't fit on a 55mm Swarovski eyepiece. Therefore I've designed a fitting part. In the picture…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Holds five microscope slides at the same time to stain them in Coplin Staining Jars. Created interchangeable handle
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Coperchio di ricambio per tagliabordi a batteria 20V PARKSIDE PRTA 20-Li Replacement cover for cordless trimmers 20V PARKSIDE PRTA 20-Li
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
This mirror is meant to recreate the look of the James Webb Space Telescope mirror array. I picked up some gold mirrors on Amazon and designed frames to hold them each in place with a dot of glue. Each frame is keyed to slot into the next…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for one variant
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
Print approx. €4.25–€5.19 excl. taxPreliminary estimate for one variant
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
-NON PRINTABLE : *2 M5 screw as many rubber band as you need The DIY telescope phone holder is a clever solution that allows astronomy enthusiasts to easily document their celestial observations. Made from plastic, this holder securely…
Print approx. €2.70–€3.29 excl. taxPreliminary estimate for one variant
Support on handle only
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
I wasn’t aware the M12 variant existed… I thought there was only one model of HQ camera so I was a bit surprised when I unboxed it. I couldn’t find a way to mount it to my telescope so I put together this basic design. I used some…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Arken EPL-4 Scope Parallax Wheel. Hardware required: M3 x 5 Socket Head Screw
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Request by an amatorial astronomic photographer “Andrea Anghileri” This is a dew shield for a guide telescope by Svbony model SV165 3omm f4 The project is composed by 4 pieces: dew shield with rapid joint lens cover with rapid joint part…
Print approx. €7.47–€9.13 excl. taxPreliminary estimate for one variant
Die Teleskopringe sind zweiteilig und gedacht für Teleskope mit 200mm Tubusdurchmesser. Für die Montage werden Nutensteine (vorzugsweise mit Feder) benötigt. Passen sollten alle Typen der Größe 20x12x5 oder kleiner und alle Gewinde M5…
Print approx. €8.77–€10.72 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
Using an Andonstar AD407/409 Digital microscope with the Elgato Wave Mic Arm requires and adapter to make if more functional. This is my 3D print design based on ChanceKJ's machined metal design from KLOV - the killer list of videogames.…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET
Here is my version of the Cheshire eyepiece, in a 1.25" (31.75 mm) version. I split it in 4 parts, so i can 3D print all of them, in two colors. No glue needed. The crosshairs is replacable! this is so fragile, i wanted the eyepiece to be…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
Print approx. €6.23–€7.62 excl. taxPreliminary estimate for one variant
I couldn't find a fitting holder for my 7.8mm diameter endoscoop camera that fits on my mk3S+. Found this model on thingyverse: https://www.thingiverse.com/thing:4055057/filesn and modifited it to fit an 8mm endoscope camera. I used this…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Topper prints in place, make sure it's flat against the print bed.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Solar/Lunar filter attachment for a Meade ETX-70 telescope. An absolute must for viewing a solar eclipse! Includes a built-in indirect sight for aiming. Use with solar film such as this for solar viewing.…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for one variant
So we already had a Phone Mount for our Microscope and wanted one for our Telescope as well. As they are quite expensive I thought I would design a very easy to print / use adapter sleeve to make the phone holder/mount interchangeable. I…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
This is the third in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to…
Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant
The metal base plate on my Andonstar 207 was a little small, so I printed this extension to give me more room. It looks like it might fit other Andonstar models, but don't quote me on it. The fit could be a bit tighter, but it's been good…
Print approx. €6.30–€7.70 excl. taxPreliminary estimate for one variant
Stativ pro USB mikroskop, kombinace 3D tisku a dalších komponent. Hlavní sloup je dřevěný hranol 35 x 35 mm, dal by se nahradit i nějakým pevným tiskem. Posun pro zaostřování je řešen závitovou tyčí M8. --- Tripod for USB microscope,…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
Arken EPL-4 Scope Magnification Wheel. Hardware required: M3 x 5 Socket Head Screw
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
2 X Magnetic 5.00mm X 4.00mm
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for PETGSource material: PET
This is a elevation scope magnifier for a 30mm scope. Magnifies the numbers on the elevation turret by 3x for easier reading. Assembly: Cut the credit card magnifier to fit the frame. Place magnification piece into frame and then press…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉 The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
No supports needed, the screw might need some moving around to achieve smooth motion. Link to the endoscope used (pick the soft 1m cable option)
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
KRYT NA TELEFON SAMSUNG GALAXY A32 S LOGEM MINI Upravil jsem výše přiložený kryt pro telefon samsung galaxy a32 a přidal jsem na zadní část logo značky aut Mini. Pomocí programu Autodesk Fusion 360 jsem na zadní část vymodeloval (pomocí…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This is the second in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want…
Print approx. €6.18–€7.55 excl. taxPreliminary estimate for one variant
Hi, Here an enhancement of the camera mount I designed for my 3D printer Creality Ender 3 S1. The previous version had some weakness, like the camera support, too thin, and a bad angle view. I operate a new design with a better support…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
two-part clamp bolted together to hold a 56mm+ 144 Led light ring lamp below the 35 mm lens ring, and attach the whole to the same Andonstar AD208S-style extruded microscope stand with 10 mm high, 35 mm dia metal ring and two 30 degree M5…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
This scope goes along with the Printable Mida Multi-Tool done by NXFreemo on Thingiverse. I removed the lenses so you can see through the scope if you want. Had to clean up the model a ton! Breaking it up into the parts seemed the best…
Print approx. €6.71–€8.20 excl. taxPreliminary estimate for one variant
Locks the probe in the 10x position saving the headache of having to constantly check.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is an experimental device. Use with caution on your own risk. Verify dimensions of the particular device before printing. Manufacturing instructions: Ring: Material: TPU, 40D or other softer flexible filament. 3D Printer: FDM 3D…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for one variant
⚠⚠ DON'T LOOK AT THE SUN WITH A TELESCOPE ⚠⚠ I can't stress that enough. Serious damage when used improperly. This was designed to go on top of the Hadley Telescope . This adapter specifically fits the SVBONY SV229 Solar Filter . It needs…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for one variant
I designed these cover for the eyepieces in stereo microscopes aka Amscope and the such. Please print it with supports.
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant
Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Designed for the TPO 180 Ultrawide telescope, which is also called the Askar FMA180. It won't work with the new Pro version. Clamps around the reducer and the right position is at the back of that section. This give you more room for a…
Print approx. €12.67–€15.49 excl. taxPreliminary estimate for one variant
Rev 2 is stronger - when the first design (R1) was mounted, the open ends splayed out as the fasteners got tightened. R2 also rotates the model 180°, and increases the layer height, resulting in a faster print. Recommended Print Settings…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Camera to mount under a microscope and visualize the images via html on a monitor. In addition to the printed pieces you need: 4 screws M2.5 x 25mm (or M3 if the Pi holes are enlarged) 2 x M2 x 1mm screws 1 screw M3 of plastic, metal type…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
About This is a pocket version of the Glia stethoscope [1]. It's fully functional, however not meant for a clinical use, but as a giveaway. Authors Developed, tested and built at the OpenLab MedTec [2] by OStGefr d.R Foxley OStGefr…
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
OOPS! My original design was for a slightly improperly built Prusa Mini and my heat block, heat break, and nozzle all sat lower than they should have. I've redesigned the Otoscope mount part to be 2mm higher and uploaded it in a separate…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Magnetic rifle scope with fron 50 mm and rear 44 mm diameter. You need 12 pices of gagnet 6x2mm (Aliexpress) - https://www.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.15.8b511802zbc0Fz Scope is Meopta…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Grommet with tapered bore to fit Jiusion USB microscope from Amazon. Intended to relieve focused pressure on microscope from two set screws. Improves stability during focusing.
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
This model is a setup I am using to precisely control in 1 axis the movement of one chamber relative to a fixed chamber. This setup can go under a confocal microscope and be assembled with very little investment. There is a very tiny…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
I am providing the model for the Motorola G6 Plus and Kosmos 722510 children (Entdecker / Explorer), but the FreeCad File is parameterised and you can easily adapt to your own phone. The biggest advantage is that more than one person can…
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
Novelty glasses with a scope reticle so you can take aim at your friends and love interests. Makes a great gift for your gun nut friends! Wear to parties and social gatherings. Assembly only requires a short length of filament t act a a…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
We bought this microscope 8years ago, it came with a poor ccd with VCR connector. Since the original shop is closed now, I don't know the correct type lens to replace the CCD lens for camera. The most simply way is to add an adaptor with…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
The eyepieces of our student microscopes get a rough treatment every now and then. This collar will cover up the damaged parts of the eyepiece. See pictures.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Simple and quick print, I find 0.1mm gives the best result. Sew it to anything! Shirts, Backpacks, Hats, Jackets, Jeans, Anything!
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
half-hour print version of led light-ring for andonstar cast metal microscope stand. Warning PETG gcode file. For PLA, slice your own. If you need some other lightring, use OpenSCAD to modify various parameters.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
Print approx. €5.40–€6.60 excl. taxPreliminary estimate for one variant
Mounting plate for cheap USB-microscope to ML3DPrintings Anicubic i3Mega XCarriage MK4. Great for precisely taking a few pictures of delicate pcbs for example. You'll need a M3 heatset insert and a M3x10 screw to mount the microscope clip…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant
The outer ring of a friends telescope golf ball collector broke off. I designed and printed a suitable spare part, so I could repair the collector. 0. Preparation To take off the original outer ring from the telescope rod, you carefully…
Print approx. €1.86–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
Podstavec horní části nasaďte do díry ve spodní části. Pozor, jde to ztuha. Obě části na sebe nasaďte co nejpřesněji. Nic se nemusí lepit. Insert the base of the upper part into the hole in the lower part. Careful, it's a bit stiff. Fit…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
A little tray to store 4 focuser bodies on your famous Hadley telescope. https://www.printables.com/model/224383-astronomical-telescope-hadley-an-easy-assembly-hig Inside diameter 35mm, inside height 20mm. Holes on the side are 3.3 to…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
This is a 0.8 MOD gear 60T for the focuser wheel of Pentax 75SDHF telescope, which is used for focus automation via ONSTEP ASCOM driver.
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
A simple front grip your Street Sweeper, with a rail section, so you can attach your accessory of choice. You will need a single M3 x 35mm socket head bolt. For the best mix of robustness and flexibility, I recommend you print it in PETG.…
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
I made a Finder Scope mount for a Celestron PowerSeeker 127EQ that utilized a Picatinny-style rail. I wanted to mount a scope with Weaver-style mounts to the finder scope mount, but I didn't want to design and print an entirely different…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Designed around these 8x3mm neodymium magnets from amazon . Up to three can be push fit into the back of the holder. Accommodates a cable diameter of up to ~3.2 mm. UPDATE: Added model and print file for wide slit variant, which supports…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
