Counting matching models…
This is my 1/6th scale ED-209 from the original Robocop movie. I've decided to give it away for FREE. NO reposting on other sites. Consider this a Printables exclusive - else or NO MORE FREE _SHIT for anyone. Also, NO RESELLING OF PRINTS…
This holder is designed to make charging less cluttered and more organized. It’s made to perfectly fit your Apple wireless charger and cable, snapping right into place—no glue or tape needed! Includes built-in cable management on the…
About Voron V0 Auxiliary Fan Ducts These are auxiliary fan mounts for the v0, which you can use if you need extra cooling on your Speedbenchy journey. The ducts can be easily installed after the Printer has already been fully assembled,…
I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :) I managed to print the left one without any supports and for the…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
Basics & Demo This display case tightly fits onto the Taurus cooling duct, version 2 and up. You can find this cooling duct here: https://www.printables.com/model/511962 If you're not already running a Taurus cooling duct that you are…
You will need to order the unassembled or LP version, and desolder the USB connector from the amp board if you don't order unassembled. You will also need to solder the wires from the USB cable directly to the amp board. This uses 3.8mm…
STILL IN PROGRESS!!!! Report me any trouble you see or any ideas you have for adapt this cover. Some problems can appears with air flow in some case. i'm searching a way to correct it. Update 03/06/2023: new design to test, please give me…
Design has some quirks but the airflow is good. May tweak in the future. Use M3x20-25mm screws to attach the fans - holes on the duct are friction fit and should take some work the first time. Use stock M3 screws to attach the ducts to…
This mount keeps the nozzle in the same place as the stock nozzle, so no loss of print volume on any axis. Uses original mounting system, no extra hardware required. Base model with optional: Dual 5015 ducts Single 5015 duct (remix of…
This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The outside diameter is 169mm to allow it to be printable on most printers. I have added a second model that includes screw…
Two versions Z2.5 for stock nozzle no changes needed. Also suites K1 nozzle with 0.7mm extra clearance over stock. Z4.0 For Volcano nozzle. Multiple Fan adaptor options 2 x 5015 1 x 5015 For K1 and Volcano nozzle refer to the Nozzle/Heat…
BOM 8× M3×14 BHCS 4× M3×8 BHCS 8× M3 heat inserts 4× 3×6 Magnet Material ABS, or ASA for best results Print Settings 0.2mm layer height, 2-3 perimeters, ~25% infill are more than enough.
Yet another cooling duct for AD5M. Fairly lightweight, under 20 grams printed with the modifier from PET-CF. The first model is tested only with AliExpress aftermarket nozzle, the 2nd one is for Original nozzle and Phaetus Conch. Modifier…
Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…
Baby Ape 3" ducts will fit perfectly. 5 inch ducts will fit any quad using 5" propellers. These don't have a full duct shape but offer a middle ground allowing for fitting in most places.
Let me introduce my own project, it was created to eliminate cheap 5015 fan rattling problem mounted perpendicular when X-axis move. To solve that I place both fans parallel to X-axis, also move it ale the way up that they can take cold…
Here's my take on quick change magnetic dust ports - fusion files included (parametric as best I could). Requires 12 8x3mm Neodymium Magnets ( Amazon affiliate link ) is opposite polarity every other slot. Depending on the tolerances of…
Updates to ari.mandjelikian 's excellent model to add a few more options to help with storing smaller items. The three-tier version has small pegs to help it locate correctly on the lowest level box that will need some supports. The top…
REMIX from: https://www.thingiverse.com/thing:5191744 Great Design! This upgrade will allow the use of 5015 Blower fans on your SV04. These fans & ducts may cause worry for those that like loud fans. Db meter showed a -6Db over stock (+/-…
Remixed the MK3s+ fan shroud to add a few partitions to ensure air splits up to flow out the side vents. Not sure the impact of this but it doesn't seem to hurt. :)
The design uses two 5015 fans with two fan ducts, one at the front and one on the left side. [THIS IS NOT NEEDED, THE FAN FITS ON THE LEFT SIDE FINE] To make space for the left side fan duct the 3010 heatbreak fan has to be rotated to the…
I made a remix of the original model by FelipeCavalc_1744406 which is more stable and a bit more closed the right fan
BMW K1200 ITB air duct pod filter connectors. This effort was to repurpose the OEM airbox on my K1100 project and utilize the space in the airbox for such things a the main battery and possibly other electronics. Yes, the designs here are…
These cooling ducts mount under the A1 and create a duct that passes from the vents on the sides of the printer to the vents on the underside, allowing you to pull air across the passively-cooled electronics and more safely enclose your…
I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version.…
The Jonsbo N1 is a sleek and modern RAID tower case perfect for a DIY home office server. Set up as a virtualization server, however, the CPU and mainboard area becomes hotter than ideal. Air from the front fan disperses en route,…
Plug & Play dual fan ducts for the E3D V6 This designs allows you to place a dual 40mm filament cooler fan integrated with the E3D own 30mm hot end cooling fan. There are two version. One with a ring-shaped end and a more traditional one.…
Remix of AsBurli 's awesome design of a cable duct for Voron 2.4 3D printers mounted to the back panel. This version adds a large opening on the end of the top/bottom piece and uses two screws for mounting instead of one. There is also an…
4020 blower fan ducts design to work with The Mint Mount. Requires M3 screws for a secure mount. 25-04-2021 - Updated design to provide more clearance. Print Settings Printer: Twotrees Sapphire Plus Rafts: No Supports: Yes Resolution: 0.2…
Modified crazy ducts from Mantis github: they are 8.5mm lower to accommodate Dragon/Rapido UHF and added mounts for neopixels. Rest of the toolhead can be found here:…
These wire ducts are designed to attach to the 3030 extrusion at the bottom of the electronics portion of the RatRig V-Core 3. There are 4 different lengths of ducts depending on the size of the V-Core (200mm, 300mm, 400mm, 500mm). They…
All credit to @ AustinDennis_479320 , @Jared_273781 , and @BlakeDouglas_545792 who created and tested the original design The following modifications have been made: The screw holes are shrunken down to 2mm diameter because my screw holes…
Hero Me Gen7 CPAP dual ducts Use with 18mm internal diameter CPAP hose. Cheap hose: https://s.click.aliexpress.com/e/_Dcjs6K7 Update 2023-12-02 Added a STEP file as requested
An easy to use, lightweight, swappable cooling duct system with different attachments. Once the top latch is mounted below the radial fan, it is very easy to swap out different attachments by sliding them on and off from the top part.…
Auxiliary products for Airbrush, suitable for Vallejo.. Positions for 1x200ml, 5x 60ml, 2x32ml, 1x17ml bottles, 2x hole for cotton buds or tampons and 3x positions for brushes, scalpel, etc. The vents are only decorative, they have no…
EVA 3 Beacon Probe UHF / Volcano Ducts (Heat insert).
Overview This remix of the EVA 3 Beacon Probe UHF Volcano Ducts is designed to be compatible with the latest Beacon3D Rev H, a high-performance 3D printer component that enhances precision and efficiency in the printing process. By…
Running the Ankermake M5 in a diy wooden-based enclosure facing issues with overheating these ducts will allow a slot to be cut into the base of the enclosure for improved cooling without compromising the temperature of the enclosure.…
A plug must be removed from the bumper to fit perfectly. Cut a hole on the wheel arch and screw the other part on with the cap. Designed for 60mm wide pipes.
Improved part cooling fan duct designs for the CreatBot F430 printer. Recommended to print using ABS, Nylon, or other high-temp filaments. Print Settings Printer: CreatBot F430 Rafts: No Supports: No Nozzle Size: 0.4mm Layer Height: 0.2mm…
PERSONAL USE ONLY Reason: The ventilation was grabbed from: https://nextlevelboardgaming.com/product/nemesis-3d-game-board-stl-files/ If you decide to use it for other purpose, check the site and purchase a license, it that's applicable,…
Horizontal bend to miss rear mounted cooling fans and wall allowing full use of the rear left of the bed.
3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…
I like the concept of the Modular BIQU H2 Mount for Ender 3.X But I wanted to use my existing base mounting plate. The CR Toch was too close and the duct didn't fit. The original design is slimmed down so it can fit BIQU H2 Ender 3 V2…
This is a drawer organizer for the IKEA Malm vanity, or any other vanity you have. This organizer is stackable and perfect for foundations and serums. This makes the products accessible while saving space- fits most of the popular make up…
I made these when I was testing axial vs blower fans for print cooling. 5015 fan mounts just by friction, 4010 & 4020 fans mounts by basic 3mm wood screws. Video if you want the details:
A Holder for Shaving Foam, Razor, Balm, Aftershave, small comb and scissors. Keep your stuff handy and tidy. SIZE 205mm x 75mm x 45mm : New Design October 2023. A NEW improved version now available : - Shave Organiser by Peter Martin |…
For anyone who needs a simple exhaust plenum. I'm working on upgrading my 3D printer ventilation system and needed some bents, ducts and exhaust plenums etc. Figured I might design and print the parts myself. Even with the size of these…
These are fan ducts for the OpenBuilds Blackbox and OpenBuilds power supply (PSU). While in a perfect setup both would be in a separate enclosure free from any dust, some setups don't have the room for that. To keep dust out of the PSU…
The left and right side have been separated so each fan has it's own path. No other changes made.
print the OCP logo face down with whatever surface texture you desire. The base plate can print bottom down. Paint the letters and then varnish them. Glue the OCP logo down and then watch Robocop spread justice.
I have modified the original NG X carriage to mount the Xol toolhead while not losing any X or Y build volume and be as close as possible to the stock toolhead in terms of reach allowing (hopefully) full compatibility with tools mounted…
Prusa Core One + Particle Evacuation System Print Settings: This model is optimized for PETG printing at a 0.2mm layer height. Supports are required for: The base The upper part of the closure valve The pipe elbow update : Base horizontal…
I used the OnShape Gridfinity files adjusted by youtuber PinoyDIY and made some larger bins for my bathroom drawer. I thought I'd add them here for anyone. Original gridfinity system made by Zach Freedman for use with Fusion 360.…
I needed shorter Cable Ducts for my build, so i created this Hackjob in Prusa Slicer...
Hardware required: 42 x F683ZZ 3X7X3 bearings 42 3x22mm (or shorter) pins These can be found on Aliexpress, Amazon, or Moose Mod Shop
Print in ABS/ASA or better because of heat. Reuses the fans that come on it or get some new 4010 blowers. 2 10-15mm m3's to attach to back of hot end. 2 tiny self taping screws to attach fans to ducts/bracket. Organic supports. Set to…
EN This is a dispenser for women’s hygiene products, intended for use in public restrooms (schools, offices, shopping centers, etc.). As of January 2026, a regulation comes into effect in the Czech Republic requiring the provision of…
This little gem was inspired by a ton of variations of ramps boxes i found through the search function... I was looking to keep my drivers cool and keep little fingers (like those of my kids) and teeth (like those of my cat) from touching…
Noctua NF-A20 fan duct and table clamp mount I chose to go for table clamps on this one, bc the A20 fan is heavier than the 120 and 140mm fans. A table stand would be a lot bigger and I dont want to waste filament if I dont have to The…
No Support needed. Print in Asa for best results. Find Markus Schlenkers printhead here: https://www.printables.com/de/model/372802-anycubic-vyper-custom-print-head-v1v3-with-2x5015-
Print upside down on textured bed with PETG. 0.2mm layer height. *New second version has a heap more holes for hex keys and other tools
Print in PETG Props need to be trimmed a litte bit
Fits perfect on IKEA VESKEN Products
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…
Ducts made of a single piece easy to print, use PETG layer height 0.2, print with the ducts up so that the motors sit well in the frame, printing supports are required
Get your ducts in order! Angled ducts with wide turns to ensure smooth airflow. Printing PLA or PETG 100% infill 0.2mm No brim Print with one end flush to the printer bed Supports recommended under 135 degrees, but your printer might be…
The original rung lock of the ladder has a constructional issue causing a predefined breakpoint at the begin of the lock tongues. So a lot of these locks breaks over the time and can't be bought separate. The new designed part does not…
I needed a way to securely mount the servos on my VS4-10 builders kit chassis. Since I was using a custom body and some other modifications, other options didn't work for me in a clean way. I can''t guarantee that this will fit with the…
i used https://www.printables.com/model/553657-siboor-voron-v0-blower-duct to be able to use this in combination with my Rainbow Matchsticks 0.2mm layer height, 3 perimeters, ~25% infill.
Since the Microswiss hot end hangs a bit lower then the standard hot end of the Ender 3 V3 KE, the ducts of the Fatburner cooler are too high, so I attempted too lower them. The added photo is with ducts from the ‘original’ Fat Burner…
OCP - Omni Consumer Products, License Plate Frame, Robocop Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Box with slide lid for beauty products, small items or divers. 3 different versions with 9 variants each and 3 different lids in 2 variants I printed it with Prusament PETG Jet Black filament. Additional notes Please support my work give…
These are a number of air ducts that can be used with the FlashForge Adventurer 3 Airduct Mod by GyuOh Choi, as a way to get some kind of adjustable parts cooling with the Flashforge Adventurer 3. The percentages stamped on the ducts are…
01.2025 - had some issues with the back-to-front version, it melted at higher temps. Added a new model with duct tips moved 5mm away from the nozzle without the louvred tips aka got them more solid aswell. Currently testing and…
Vegan Sign Just a simple remix, I'm using it to highlight vegan products/food Printed at first and regular 0,2 layer…the M600 pause for color change should be around layer 11
The 204 model is for fixing the naked ducts to the wall. The 208 model is the on for fixing the duct connectors The sleeve is for connecting 2 ducts together The cover is for closing the end of a duct Print with full walls and preferably…
СКЛАДНОЙ КУБОК
Kato offers viaduct tracks with a height of 60mm (track base above bottom). At same time and by whatever reason T-Trak-modules, that are heavily based on Kato’s Unitrack system, are defined at a height of 70mm. Isn’t this crazy? But here…
Elegant, useful, and efficient! They protect the top of the stack and help cool the components better. PRINT SETTINGS: -pla -30 % INFILL
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
My Cooling Ducts using Fans 5015 24V https://www.amazon.com/gp/product/B079BPS9Q8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 The Hot End Duct ONLY was Remixed (Completely Redrawn) from https://www.thingiverse.com/thing:2994069 Print…
Anycubic Kobra Go Printhead / Part-Cooler & Fan-Ducts May fit other Makes / Models Revision 1 By: David Orlo Part Details This was one of the first upgrades I designed and finalized for the Printer. Soon after completing this model, I…
Tested with 19mm hose. Likely works down to 17mm and up to 20mm. Paint on supports as shown. This is meant for a hose with the end cut off. Use a ziptie to secure the hose.
With the total of 6 individual gridfinity bin models, they combine into a 1 full set of eye related products organizer. The model in the first image is an organizer for glasses. The semi-circle dents around the bridge of the glasses…
works well for my rapdio 2 plus uhf
Just slightly modified fan duct. they are tapered, to deflect air in direction of a nozzle. It is improvement over a stock duct, but still some limitations because of steel frame in a way for more direct duct. Category: 3D Printer…
Replacement clasp for Outdoor Products model 172 24PK-DRBL watertight box. One of the two original ones snapped in half. Edit: Tried it first in PLA but of course, after leaving it in my car for a week in a heat wave, the clasp softened…
This 3D printed ball mount is designed for use with ARM Products systems, offering a strong, lightweight, and practical solution for securing your accessories during travel or off-road use. It features a standard 1-inch ball that is fully…
Minimart mini Shelf Products Pack for Diorama Scene - Snack - Instant Noodle - Cookie Box - Pocky - Yogurt - Pringles
An organizer for shampoo bottles and two razors with hexagonal holes for drainage
Made to fit Valio products. At least milk carton, whipping(?) and food(?) cream lids fit. Other lids might also fit if they are 25, 31.5 or 40mm wide. I think Valio only uses these 3 twist lid sizes but there might be some I haven't seen.…
Use this if you want to install a Phaetus Rapido on your Tiny M or other sailfin extruder.
What has been done: Enlarged the duct tip (12 mm) Angled the top part of the tip to help redirect the flow. Angled the part that goes to the extrusion, so the duct points downwards a little bit more (only the versions that do not say “non…
As stated in the differences section, this is a resized Pro Max Whoop 3d printed ducts to suit the standard 75 frame. I have been using the standard struts from the original page which may be putting the ducts a little high, but seems to…
These are the test ducts that I designed for my 5015 vs 4020 vs 4010 blower fan comparison video:
Since the Fractal Define 7 XL is a large case, i wanted to use air coolers, but i wanted it to be efficient and utilize the least amount of fans. i am happy to do any modifications if required. Let me know if i missed anything or you need…
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.
I designed some cable ducts to arrange the wiring of my Muldex 3D printer. Dimensions: W28mm x H36mm with the cover The vertical and horizontal parts have cutouts for the Duet 2 + Duex 5 boards wiring, but I also share a “blank” 100mm…
![AnkerMake M5 "Mouth Guard" Ducts [Redux]](https://media.printables.com/media/prints/465630/images/3817259_c15f00bc-2d80-4deb-98fa-0996217b2391/20230428_210523.jpg)
