9,404 models
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for PETGSource material: PET
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
Thank you for your interest in the Universal Enclosure Standard Build. All STLs for the Standard Build are below. We also have an additional set of Daisy-Chain and Accessory STLs available on our profile. To purchase the kit for this…
Print approx. €9.88–€12.07 excl. taxPreliminary estimate for one variant
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
I probably won't use this for my final setup but someone might find it useful. Use the plastic rivets to secure it to the top of the enclosure. I made sure there was clearance. It's designed to be used with the PTFE tubing that comes with…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
This enclosure is based upon the Prusa Printer Enclosure V2 – with MMU2S support. https://www.prusaprinters.org/prints/3673-prusa-printer-enclosure-v2-with-mmu2s-support I wanted to have a tall enclosure to be able to keep the spool…
Print approx. €16.55–€20.23 excl. taxPreliminary estimate for PETGSource material: PET
WaveShare makes a really attractive and very compact base board for the Raspberry Pi Compute Module 4 (CM4). Unfortunately, when I bought mine, there were no suitable enclosures available. This model addresses that shortcoming. This is a…
Print approx. €2.19–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
Snap-fit enclosure by SP5CMD
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
Print approx. €12.26–€14.99 excl. taxPreliminary estimate for PETGSource material: PET
printed with: Prusament PLA Galaxy Black support necessary
Print approx. €7.55–€9.22 excl. taxPreliminary estimate for one variant
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
I had a need to run and secure a power cable on the outside of my Original Prusa Enclosure. I designed this zip tie mount for that purpose. It has an inset for an M3 nut. I used a M3 x 4mm socket cap screw to attach to enclosure. Print…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
This is a Simple 3 Parts Rotating Tablet Stand for Ikea Lack Enclosure 1 tablet stand 1 threaded cap 1 bottom corner
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for PETGSource material: PET
A minimalistic electronics enclosure to put the BigtreeTech SKR 1.4 in a box at the front of an Creality Ender 3. Print instructions Design goals: Under 2 hr print. No supports. Viewable faces flat on the bed for best finish. Reuse of…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I know “just buy the addon then”, but I like designing in Fusion and am a DIYer so I came up with my own solution for an air extractor / filter box for my Original Prusa Enclosure (OPE). What I already had on hand was a 120mm 12VDC fan…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I have seen several of these online but they don't fit my MK3S or they are really flimsy. I redesigned the idea to make it solid and fit the printer WITH THE ORIGINAL BOLTS INTACT. The prusa original cover ignores the bottom of the bed…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
My home automation Raspberry Pi needed a UPS battery backup. I am using HomeSeer HS4-Pi. Found this Pi UPS on Amazon and it works great. Wanted a long lasting UPS solution. Existing power supply powers this UPS while providing power via 2…
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
I wanted some strong handles to attach to the top section of my Lack enclosure, so I remixed the Prusa Spoolholder B4 STL for this purpose. This makes removing and placing the top section much easier. I used coarse-threaded 3.5x16mm…
Print approx. €14.43–€17.63 excl. taxPreliminary estimate for PETGSource material: PET
coupling PTFE tubes from the MMU buffer holder to PC4-M6 quick coupling Components required for assembly: Typ 1: 5x self-cutting screw 3.5x12 2x longer countersunk head self-tapping screws for wall mounting 5x PC4-M6 quick coupling Typ 2:…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
The LACK V2 enclosure has fairly significant gaps between the legs and side / rear plexiglass panels. I couldn't find a good set of trim pieces to fill the gaps, so I designed slide-on skirts with a friction fit. Once installed, they can…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
There are two versions. One is compatible with a great display cover: https://www.printables.com/cs/model/555790-remix-of-prusa-mk4-lcd-anti-dust-cover-2-versions The second is without cut-outs, i.e. for those who do not need this display…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Filament guide for Ikea platsa enclsure. Fits into a 16mm hole, a bit of glue to keep the parts together, makes for a really nice finish. Printet in PLA with 5% infill and a brim.
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Speaker Enclosure Designer for 4" Speakers Tested with: Focal 100AC 4" Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes - only needed on bottom part Resolution: 0.3mm Infill: 5%
Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant
Instructions and notes: No need for rafts on a print with 0.2mm. The 0.2 quality setting on PrusaSlicer with MK3S comes out really nice. Print the arms sitting on the large diameter edge (cylinder facing up) for best quality. Important…
Print approx. €2.22–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
I did not want, or need, to use the included USB extension that came with the Prusa MINI Enclosure. I utilize Prusa Connect/Link to transfer files to my printer. Not liking the idea of the extension just laying in the enclosure I decide…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Items needed: 1 x Raspberry Pi Zero W 1 x Raspberry Pi Camera module 3 Wide 1 x Raspberry pi Camera Cable (300mm) 1 x Filament of choice 4 x M2 screw (15mm) 4 x M3 screw (10mm) 5 x m4 screw (16mm) 1 x MicroUSB Cable (Length is up to you)…
Print approx. €6.58–€8.05 excl. taxPreliminary estimate for PETGSource material: PET
My 3D-printing philosophy: Things should print without supports and snap together whenever possible. I wanted a box to put my Google AIY vision project in that was a bit sturdier than the included cardboard. The previous designs by…
Print approx. €4.46–€5.46 excl. taxPreliminary estimate for one variant
I wanted a nice enclosure for my QuinLED Dig Uno board and quickly put this together. Still a work in progress but it should all work! Variety of ventilation covers included (and one with no vents so you can make your own). Features:…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
This enclosure requires no additional hardware. If you print from gcode / 3MF file, there is filament change command added to swap colors. You can print in two or three colors. This works even if you don't own the MMU! You will just have…
Print approx. €3.99–€4.88 excl. taxPreliminary estimate for one variant
This mount for the Buddy3D camera is specifically designed for enclosures made by 3DUpFitters, and replaces the original corner bracket in the upper-front-right corner of the enclosure. The design consists of two parts to allow the camera…
Print approx. €4.05–€4.95 excl. taxPreliminary estimate for PETGSource material: PET
Remixed version of Fiat 500e key enclosure by Helmut Steinberger
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
The 2kg spool didn't fit on the stock Prusa holder. I didn't want that much weight on the frame, so I modeled up some brackets to have the enclosure hold the weight, I used some 20mm extruded aluminum to bolt in to. it uses 2 RC axle…
Print approx. €17.52–€21.41 excl. taxPreliminary estimate for PETGSource material: PET
Modified the original design to fit a 5V 30AMP relay. I have modified the dimentions to fit a 5V 30Amp relay that I had to use in a project.. Amazon link (no affiliation) - https://www.amazon.com/gp/product/B07DSZFLMQ Relay Dimentions:…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
This is simple LED strip mount for Original Prusa Mini enclosure. Model It has 40cm of length, 1,2cm of width and is mounted by 3 bolts to the small “rounding” wall between main walls. I have designed it to use leftover M3x8 bolts and M3n…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I found Minimal XiaoMi Mijia Sensor IKEA PLATSA holder and noticed that it could easily be updated to a supportless one. The modifications are small, but enables supportless printing. Print the model on it's side (like in the gcode file)…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I made this remix for usb plug hole in the mini enclosure to use it with the usb mount by https://www.printables.com/model/1003952-external-usb-socket-for-mini-enclosure. Printed in Prusament PETG ultramarine blue.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
An extension for the supplied or printable Prusa MMU3 Enclosure add-on spool holder . Should fit spools up to 125 mm wide.
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
I have two of the below 1U rack mounts. I found that as most of what I build I had a part that I could not use due to the way I ran electrical wires. Of the 5 PI mounts with SSDs I put it on the bottom shelf of the Lack Enclosure I built…
Print approx. €14.04–€17.16 excl. taxPreliminary estimate for PETGSource material: PET
I guess you can say I like magnets. This is a different style of prop for the top hood of a printer enclosure. It utilizes a bar magnet so it's ideal for metal enclosures. Being triangular, you can move it forward and back to adjust the…
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for PETGSource material: PET
I bought a DTU electronic set with a display which was not fitting in the enclsure. Therefore I adapted the lid.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
This vibrationes have a negative effect on print quality and accuracy. The problem reduce two simple printed supports on the bottom of the enclosure, mounted from outside below the printer feet. The supports are 2mm higher than the…
Print approx. €2.56–€3.12 excl. taxPreliminary estimate for one variant
I wasn't quite sure about the naming (feedback welcome) but this is the current naming scheme: Nozzle Sizes: 0.25, 0.4, 0.5, 0.6, 0.8, 1.0 Types: B -Brass HB - High Flow Brass S - Steel X - Nozzle X R - Ruby O - ObXidian HO - High Flow…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
If your using the MMU with the 3Dupfitters MK3S+ enclosure, there is no need for the top slot opening. This is a simple cover for the slot.
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
This is a magnetic camera mounting bracket for the Logitech C920 camera designed to be used with the Original Prusa Enclosure. The USB cable feeds through the hole in the side and the camera base fits snugly inside. There is space for…
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for PETGSource material: PET
[EN] To illuminate the LACK cover on the printer I used a Zigbee light from Lidl, where you can also buy a Zigbee button with a magnetic holder to control the light. Unfortunately the original pad is designed for a standard wiring box and…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
If your not using the MMU with the 3Dupfitters MK3S+ enclosure, there is no need for the rear holes. This is a simple magnetic cover for the slot. It requires printing 2 pieces (included in the gcode). You need to glue in a 8mm x 3mm…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
print four put under laser cutter (if you're keeping yours ontop of your prusa enclosure like we are) job done
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
IMPORTANT Please read the whole project posts before deciding on ARC enclosure. Download the user guide (ARC Manual), Bill of Material (BOM) and ARC Panels DXF in the “other files” section. Read the user guide to better understand how to…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Needed some push-rivets after losing some reassembling an Original Enclosure - sharing here in case you need some also. Simple functional push-rivets used in securing thin panels for the CORE One, the Original Enclosure and I assume,…
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Update 8-21-24: I finally have my enclosure built. I still need to add a couple of magnets for the door and add some lights inside, but it's finally built. Update 2-22-24: I uploaded a 3" variant of the side support and middle brace. I…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
WHERE GEN2 BEGAN This is the design that started everything. In 2019 I printed a single storage drawer to organize supplies for a used Prusa MK2. In January 2020 I shared it here as the Lack Enclosure Drawer, and it went on to be…
Description Printable accessory developed specifically to enable you to have more tools close with Tool Holder on your Original Prusa Enclosure. To mount the Tool Holder you will need the following fasteners*: M3x8 screw (2x) * The…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas
This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…
A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original features of the case accessible with a possible upgrade path to existing models, that…
All printable parts for your Original Prusa MINI Enclosure . The parts are divided into folders to fit according to assembly instructions. Print instructions Download the latest PrusaSlicer and use the following settings**: print…
A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
An OpenSCAD script to generate a customisable back horn speaker enclosure. It can be customised to suit different overall dimensions, different drivers (up to two), and different side fixings. It also has a customisable space for…
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. Note that you need the injection moulded part delivered with your Original Prusa MK3S+ printer (see the pictures). In case you…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
These are all the parts I created to mod the Prusa Lack enclosure V2 to fit the ender 3. Most of the parts can be found in the Prusa build here: https://www.prusaprinters.org/prints/3673-prusa-enclosure-v2-mmu2s Wood screws:…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
A shelf to hold 5M printer essentials. Sized to fit the glue bottle that comes with the printer as well as other items. For the center mounting bolt be sure to use an M4 jam nut for clearance to print head. It gets very close to the frame.
Make Your Own Grow Tent! or 3D printer enclosure (or whatever you need) very useful for all kinds of applications, the size is of your choosing. chop the rods to your desired specs, make the box before finally cutting and draping the…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
