Liczymy pasujące modele…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
WHERE GEN2 BEGAN This is the design that started everything. In 2019 I printed a single storage drawer to organize supplies for a used Prusa MK2. In January 2020 I shared it here as the Lack Enclosure Drawer, and it went on to be…
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
All printable parts for your Original Prusa MINI Enclosure . The parts are divided into folders to fit according to assembly instructions. Print instructions Download the latest PrusaSlicer and use the following settings**: print…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. Note that you need the injection moulded part delivered with your Original Prusa MK3S+ printer (see the pictures). In case you…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version:…
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
This design uses the FLSUN SR printer itself to print the parts. Each panel for the enclosure is held on using 10x3mm round magnets as well as m3 screws and m3 T-nuts. The 6 panels are standard 12x12 inch sheets with 1/16 inch width.…
This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…
Standardsettings: 0.20mm Speed @MK4 Input Shaper Support: no Filament: SUNLU PLA+ orange Nozzle: 0.4 Layerheight: 0.2 Infill: Gyroid 15% Time : 2:10h
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
A fully functional Apple Macintosh Plus in a 3D-printed 2/5-scale enclosure. It was printed on Prusa 3D MK3S printers with beige PLA filament. It runs on a Raspberry Pi 4B with Mini vMac, a Macintosh emulator. The “Files” section contains…
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Update March 19, 2022: Improved Prusa LACK Enclosure Levelling Feet are now available! I strongly recommend checking out this new version, as it features some improvements that make post-installation level adjustments far easier.…
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Snap-in enclosure for plain ESP32 DevKitV1, I have used this for ESPresense, ESPHome AirThings BLE, ESPHome Bluetooth Proxy ..
Enclosure includes external access to reset / bootload button and to on-board LEDs.
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
The model has a slightly more ergonomic recessed grip and a cover of 5mm. The cover makes the lower screw a little more stable on the acrylic. You can use the same nuts and bolts that are used for the original.
Nástroj se třemi klíči na odemykání rozvaděčů a šestihranným 6mm slotem na prodlužovací nástavec k bitovému šroubováku. Rukojeť s postranními klíči přidává lepší úchop a větší točivý moment pro povolování šroubů/matic. Čtyřhranný klíč ve…
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
Prusa enclosure Print resolution: 0.2mm Infill: 40%-70% Material: PET-G 6mm Plexiglas 1,2 m2, aluminium profile 20x20mm Supports: Yes ----------------------------------------------------------------- You'll need: Some PET-G filament 6mm…
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…
This was originally created to add the 80mm fan/filter assembly from 3DUpfitters (no affiliation) to the Original Prusa Enclosure, but it should also work for any 80mm fan. The adapter has three arms that attach to the metal enclosure…
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
A very simple SSD enclosure, I used it to chuck 8 disks into a server chassis without any hassle. It holds 10 SSDs of 7mm (¼") thickness. Print with 10% gyroid/grid infill, no support.
This holder fits Prusa MK2/MK3/MK4 steel sheet size. It is not compatible with Prusa Mini or XL steel sheets. For mounting options, please see the the original model . Please note that you don't need to mirror this model whether you want…
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…
Für die Montage des xLCD (neuen Version) auf der Außenseite des original Prusa Enclosures ist ein Adapter notwendig da sich ansonsten die Türen nicht schließen lassen. Prusa stellt Adapter zum Download zur Verfügung ( Enclosure Printable…
***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…
I was looking for a way to mount the Logitech C920 Pro inside the Original Prusa Enclosure . With the help of Markus and his Slim Mount Base , I modeled up a corner mount in front of the LED strip of the Original Prusa Enclosure . It is…
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
This is a remix of the popular "Filler" Filament Holder Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: MK 4 Rafts: No Supports: Yes Resolution: 0.2 Infill: 30%( Connector-Infill : 100%)…
The adapters that are available are a disaster. Maybe on purpose to stretch our creativity and strength and create something nice for the community. So here I bring a nice holder that will certainly not offend anyone. All fasteners are…
Prusa Lack Enclosure Corners/Cones if you are using a third table for height. Positively locates top two tables on 3rd.
I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure…
This is my first attempt to build a 3D printer enclosure for my Prusa i3 MK3S. I used 0.060" (~1.5mm) 2'x2' (~610mm x 610mm) sheets of polycarbonate since I already had them from another project, but the polycarbonate is definitely not…
This is a snap enclosure I made for my telescope rig to mount the MeLe Quieter 2 to a Skywatcher Losmandy 355 plate. It is a tight fit so you may want to enlarge the model a very small amount (.05) and measure the tolerance against your…
When handling prints, maintaining or adjusting the 3D printer placed in the Original Prusa Enclosure, the Enclosure door must be open. Quite often the door moves by itself to a position that is undesirable. Using a set of these 3D models…
I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…
The original steel sheet cover of the exhaust fan needs to be disassembled in order to swap the filter. This means to have access from the back but if your XL is butted against the wall, this process can be quite cumbersome. This design…
Alternative door handles for Ikea Lack enclosure Required materials: 4x 8x3mm magnets 2x 3mm countersunk screw Fits 3mm thick doors print the second handle with the mirroring function in your slicer
This is a rack mountable enclosure for a Raspberry Pi 3 and the Adafruit PiTFT 3.5" screen. It consists of two parts that can be joined by just about any length of M4 screw. The holes on the bottom plate should be just small enough that…
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the…
Model is designed to fit perfectly behind my "Original Prusa Enlosure - Raspberry Pi Mount with 7" Display" model. For the ball joint, you need: 2x M3 nut 1x M3 16 mm Allen head 1x M3 10 mm Allen head I am using a Logitech C930, it has a…
My home automation Raspberry Pi needed a UPS battery backup. I am using HomeSeer HS4-Pi. Found this Pi UPS on Amazon and it works great. Wanted a long lasting UPS solution. Existing power supply powers this UPS while providing power via 2…
I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…
coupling PTFE tubes from the MMU buffer holder to PC4-M6 quick coupling Components required for assembly: Typ 1: 5x self-cutting screw 3.5x12 2x longer countersunk head self-tapping screws for wall mounting 5x PC4-M6 quick coupling Typ 2:…
My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…
A simple remix of the original midfoot for the prusa enclosure. All you need 2 magnets : 10mm x 2mm just press them in and you're done.
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…
Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…
This is a cover that fills the hole for the power supply cables. It is useful for keeping heat and stink inside the Prusa Original Enclosure, especially for those who use the PSU Cable Quick Release addon. I designed this project in a…
This is a simple jig to drill through the plexiglass on the back of the Original Prusa Enclosure and pop out the 5 PTFE tubes of the MMU3. It should work for any PTFE tube with 4mm OD. It must be screwed to the outside of the enclosure…
You should have all the materials for this build on hand, as I only used leftovers from the MK3S+ or the enclosure: 3x M3x8 screw 1x M3n nut For detailed assembly instructions see attached pdf. Achieving a satisfying snap when closing…
I wanted the text and the buttons to be more visible, as I always had a hard time finding the buttons in the evening when there's just the enclosure light turned on. I wanted to do it with two different colors along with the black base…
Print Instructions: I used 20% infill, 3 perimeters, Prusament PETG jet black and prusa orange, 0.15 STRUCTURAL layer height (for better quality). Position it with the symbols facing UP in PrusaSlicer so that the top part is nice and…
Welcome to your Ender 5 S1 Raspberry Pi Mount. Very easy, just snaps together, and it only requires 2 m4 3-5mm screws for the mount to chassis and 4 x pi screws to support in the case. Sits nicely in the top front Right corner out of the…
I used the parts from this kit https://www.printables.com/model/3267-led-light-bar-prusa-i3-mk2mk3 to mount the LED lights on the lid of my Original Encloure. Then I mounted the on/off switch inside the Prusa Basic Board Cover. Board…
I think the LED strip Prusa sells in their shop is too small, weak and expensive. So I bought two meters of a 24V LED strip and aluminium profile and splitted it into five 40cm bars to get some really bright lights into the enclosure. To…
Recommended print settings: Orange Prusament PETG (to match OPE…. or pick your own :) ) 0.4mm nozzle 0.2 mm layer height 15% Grid or Gyroid infill
The single color version of the basic board cover is great except for one thing; you can't see where to poke it to turn on the fan and light when the room isn't super well lit. So, I decided to make a non-mmu multi-color version. And,…
I created this model as I wanted to have two front switches for my MK4 Lack enclosure (the PSU is at the back). One is for the main power and the other is for the LED strip. You can either install it below or above (below better for the…
Carbon filter fan for the printer enclosure in two parts. Needed in addition: - 2 x 120mm fan - HEPA Filter 120mm (https://amzn.to/3Fs0Q06)
I needed a way to get a cord out of the back side of the Original Prusa Enclosure. After removing the small cutout on the left side I felt it needed something to cover up the hole. So, since DesertStorm's plug for the top of the enclosure…
Fastening cables with ties inside the enclosure is impractical for maintenance. It also makes less sense to pull all cables through the enclosure if the cable is only connected to components outside. This clip allows you to place the…
I redesigned my Wyze Cam V3 Lack Enclosure Mount to address several issues: Improve magnetic stability Provide optional M3 screw mount Provide relief for the rubber feet Match Wyze Cam V3 base corner radii Provide MOAR options! There are…
I wanted a nice enclosure for my QuinLED Dig Uno board and quickly put this together. Still a work in progress but it should all work! Variety of ventilation covers included (and one with no vents so you can make your own). Features:…
Duct to supply fresh air to MK3 power supply in the Printed Solid Next Gen Safety Enclosure. Designed to cover the lower ⅔ of the intake vents when my printer is on a paver and padding. Should fit the upper ⅔ of vents if no paver is in…
Designed for the same QSM-M5-4 coupling that Prusa uses for the print head side. ❗❗ ATTENTION : I found out that the springiness of the PTFE tube affects the first layer calibration of MK4 and ended up not using this approach to install a…
Build your own Buddy3D-like Camera from Wyze Cam V3 for your CORE One. With this enclosure you can build Buddy3D-like camera from Wyze Cam V3. This is somewhat destructive to the Wyze Cam V3, but if you're careful and record the process…
Same functionality like the model of BuildX, but this cover can only be attached, when the slit is not used for a tie! In addition, this cover holds a little better as it has hooks in both sides of the slot. The model was created with…
This mount for the Buddy3D camera is specifically designed for enclosures made by 3DUpFitters, and replaces the original corner bracket in the upper-front-right corner of the enclosure. The design consists of two parts to allow the camera…
Enclosure for RPI3B+ with X850 V3.1 SSD. Part list 4x M3x30mm
I have an Intel NUC (NUC7i7BNH to be exact) that I use for OctoPrint and F360. I created this so that I could mount my NUC to my enclosure but also be able to remove it easily. It has a pull-down tab at the bottom to allow you to slide…
I've added 2 holes for the screw heads for using with the Cable Cover. You need 3x M3x8mm
Affiliate Link (Hue Gu10) : https://link.amazon/B03H3JSlP Printed with PETG and TPU Try out the printed parts if they fit together before mounting Mount the Bracket first put the Buffer Ring onto the bulb corpus put the Bulb with the…
What: Set consists of the enclosure and Fudge/Fate dice set with plus, minus and neutral symbols. I designed similar dice years ago, now this is a refurbished version. Why: "In Gauss we trust" IMO the only fair and best system, properly…
Sidebox right for Enclosure with MK4 inside (and for additional spool holder) Why a new box??? First I print this one: Prusa Enclosure SideBox von XBurgy | Kostenloses STL-Modell herunterladen | Printables.com I thought I can use it, but…
Over on Tindie there's this cool Nixie Clock kit that I like so much, I've purchased two of them (granted I killed the first one and couldn't fix it, but... moving on). After I assembled the kit I determined the sufficient, but plain…
I wanted to attach the Noctua NF-F12 fan to the plexiglass of the Original Prusa Enclosure (OPE), but there was a gap between the fan and the plexiglass that allowed heat and odors to leak out of the enclosure. Therefore, I designed this…
