418 models
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
I made simple snowflake to fit on christmast three for my kid. I put two versions one with my kid name and other one clear. Fusion360 files included so you can simply put jour kids name in it. I will put more images in when printing…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
I made this for my wife who does quilting. She will use it to keep her thread in when we are traveling. The changes are parametric and will change the thread spool posts as the size of the box changes. There are three parameters that can…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
OpenScad Script for Customizable LED Box to illuminate Signs or lithophane Pictures with easy Parameters and 3 Parts. Base (or Back) with optional Holes for mounting, Front to keep the Picture in place and a insert to hold the LEDs in…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Remix of 4x Tweezers holder to mount on a IKEA Skådis Pegboard, remixed with better parameters to make it fit easy.
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
Use the same color filament as your pc case for the best look. You can use double sided tape or similar to ensure no movement but your pc should be rock'n around any ways. Use a nonconductive plastic ruler to measure the gap needed.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
2024_05_28 Newer version of these files is located here. Old files still work fine and are still posted here. works with customizer and has more options for editing pre-entered data so only have to turn unwanted holes off. easier to turn…
**Update** I recommend using the built-in calibration tests in OrcaSlicer these days instead of this model. Of course if you want to use this one, feel free :) I really liked the number of features present in Tronnic's model but wanted…
Waterproof (when using a silicone seal) Without nuts (tapered holes) Inside the mounting posts Variant hinge/clip only Need only M3x 30mm screw, twice for each clip Also published here
I've been experimenting with using the Fuzzy Skin setting in Orca Slicer and have really liked the results. However, I was struggling to develop an intuitive understanding for the interactions between “Fuzzy skin point distance” and…
The design is my own. Its easy to print, with no supports. Support my work You can buy me Coffee Or you can just click like button. Also comment and your photo of your print are welcome. Important The current STL files in the download…
I merely changed a small thing that I think was breaking the feature tree. All credit goes to the original creator, I uploaded this in case others might find this useful as I loved the parametric box. Tell me in the comment if you find…
This is half of a cable spool, I use it for underware cable management on larger and heavier cables. I noticed that the hook in the main model was only available for 25mm multiboard, so I recreated and adapted. It's made in openscad so It…
Edit May 1, 2021 : I suggest using the improved version of this: https://www.prusaprinters.org/prints/65520-spla-print-parameter-test-and-config-file-improved SPLA is a filament type offered by SunLu. Although the name implies it is…
Previously I posted a config file for use with print SPLA : https://www.prusaprinters.org/prints/65005-spla-print-parameter-test-and-config-file While that configuration file works, it did have some problems with stringing. With more…
Easily parameterizable Fusion360 model to hold any number of phones/tablets from 1 to 100. The default number of slots is five.
Gridfinity - 42mm Stepper Motor Holder Included are 7 sizes 1 - 7 steppers. Fusion365 Fusion 360 File included for easy remixing Parameteric file, to change the number of steppers choose 'modify parameters' and the parameter name is:…
Inspired by Kevin Claypool's fruit bin design, I redesigned with 45 deg hole setting so supports is not needed. The openscad file is in https://github.com/zhujinxuan/fruit-bin . If you want to remix it, for example that you might want to…
There are a few great fusion 360 parametric box generators out there. However On-Shape didn't seem to have one so when I needed a box for some loose ammo I designed one. All screws are 3mmx30mm screws. One side should be loose one side…
Bottle holder for the Multiboard using the Multiconnect system. Various sizes includes but the model is online with Onshape and is parametric. Use the URL and change the variable ‘size’ to whatever value you like. The fillets may need…
Customize to suit your needs , paramaters avilable for single point changes with no modeling skills. I will update f3d for the K1 Max and K2 Plus in the notes for values if i get a chance.
This model is designed to protect any USB cables you have that may be in high stress environments, where the cable end gets bent back and forth frequently. The model is provided in OpenSCAD format, allowing you to easily adjust the…
The proper description is the remix's differences, down below. 2025/01/12 UPDATES: UPDATE 1: I roughly corrected some bugs where Fusion didn't snap properly coincident point on projected geometry after changing height parameter UPDATE 2:…
A customizable Card tray. The code will automatically slant the cards to make them fit. Basically it does an Inverse Cos of the (box height / card Height). The length is a sum of the slots plus the extra due to the slant of the cards and…
Print as you would the original! Customize with the fusion file attached below, as you would the original! Simply suppress the last set of 10 features in the timeline to create the original stackable boxes. Keep the last set of 10…
I wanted to have a no nonsense functional and “unstyled” key holder. After searching printables.com I got to https://www.printables.com/model/69197-key-wall-holderhanger-for-8-keys but it had to thick of a lip for my particular tape and I…
These are Brackets to fix a divider board in a drawer. The f3d file is fully parameterized for easy customization. All files print without support if you orient them accordingly. By adjusting the parameters of the model to fit your drawer…
Yes another box, but I couldn't find one that completely filled my needs. Features: Honeycomb or Spiderweb mesh so that you can see what is inside without opening it. Or you can have a solid lid. Snaps tight, squeeze the sides to open No…
I've remixed the great "Slew bearing with crossed cylinder rollers" by Isi3d to be able to specify different parameters for the inner and outer rings. Separated variables for inner and outer rings, allowing you to customize the number,…
Tissue / Kleenex box holder for use with command strips. Parameterized and the Fusion 360 file is included. Use a brim to minimize warping. Fusion 360 Parameters Parameter Name Description Default BoxWidth Width of tissue box 228mm…
I found the model by @Sebastian_57252, but it was for (apparently) European carpenter pencils. None of mine remotely matched the size of his original model, but since it was distributed as a Freecad model, resizing was easy. I modified…
Parameterizable OpenScad model of a Tjusig connector. Adjust any parameter you like!
Parameterized Rocker Switch Cover Plate If you like this model, check out the updated version: Parameterized Rocker Switch Cover Plate and Box by McTech3D | Download free STL model | Printables.com Messing around with setting up…
Universal Box with CAD file . Design including Parameter . You can adjust what size you want . Box include Body and Lid . use 4x M3 Thread insert . 4x M3 screws
This is a parameterized case for the Palma 2. You can modify various parameters using the .scad (OpenSCAD) files provided here. You can even use it as a base to build a case for a completely different device. Please use it how you want!…
======================================================== This model can be printed as is or parameterized through Fusion360. Use of supports under the 'top' and 'bottom' overhangs is recommended. Parameters: Rail_Length Hole_Distance…
I wanted a dead-simple point tracker without bells and whistles that can be printed in a few minutes. The following can be configured using the OpenSCAD customizer: Number of rings (2-digit and 3-digit STL included) Font and font size…
How to change size - 1 - measure your playing cards size 2 - open the f3d file in fusion 360. 3 - press s to open the search box 4 - enter “change parameters” to the search box 5 - enter the measured size of your playing cards to the…
Stores stacks of coins. User changeable Parameters: Coin diameter Coin thickness Stack amount Coins per stack Label Diameter an stack clearance Update: V1: Fusion 360 version V2: Switch from Fusion 360 to OpenSCAD
For connecting Solvent Weld PVC Overflow Pipe diameter 21.5mm I created 21.5mm (22mm) PVC pipe connectors (solid) with specific features: Quicker to print Did not need any supports Parameter based Able to tweak clearances These connectors…
This is a gcode-file which is burning several filled rectangles on your material. I choosed to go from 10 to 100% in ten steps and for the speed I started from 300mm/min up to 3300mm/min in three hundred steps. Be careful, some materials…
Original design: KlackEnder Probe by KevinAkaSam | Download free STL model | Printables.com When building the probe for my own printer, I discovered that my magnets were a different height than the nominal in the design. I modified the…
ATTENTION - cooling fan changes coming soon. Also increased the depth of the current fan mounts in case you want to swap them out thus there's enough room for a printed adapter sheet for a smaller version. Might actually ditch the…
Because the original measurements weren't fitting my cards, I've modified the model. Now there are parameters in the fusion360 file for the heigth, width and length of the cards. The case then adapts to your measurements. Addiotionally…
I remixed RagingRoosevelt's Router Hole Cutting Jig to take additional inputs of: Guide Bushing Outer Diameter Router Bit Size Now, it will calculate the correct offset for the guide bushing and add that to the diameter of the hole so…
Parameterized hexagonal base intended for paper miniatures. I use them on a hex grid mat with 1 inch hexagons. Version 4 is optimized for printing (rounded corners to avoid over-extrusion and elephant foot). Print Settings: Layer hight:…
I know that there are a million headphone hangers on this website, but the main intent of this model was to experiment with parametrization in FreeCAD - being able to hang my headphone was just a bonus effect. The special thing about the…
The model is based on my own design ( Couch Cup Holder ). You can change the parameters with fusion360, than export the data to your slicer. ( How to export an STL file from Fusion 360 ) If you encounter any problems or have any…
Still a work in progress. If you want a specific size/shape/hole count, please let me know in the comments.
Design your own end cap for open rectangular or square pipes/tubes e.g. installation rails or shelf supports. Change in the attached Fusion file the parameters of outside height and width, wall thickness, rounding to define the cap…
Modelled those to center and reduce the excessive drag of a small and heavy spool. Worked for me, so I thought maybe somebody else could find it useful. Just measure your spool and holder and edit the parameters accordingly (Modify >…
I want to quickly change between heights and don't like the screw in feet that come with the engraver. Made this simple model to use parameters in Fusion to adjust the height. Feet are square to help with alignment (I have markings on the…
A ring to go around the camera, in stead of full protector so it can fit with camera glass protector. Print the case only (https://www.printables.com/model/600506-parameterized-iphone-15-case/files), Then print this ring and glue to the…
This is a fully customizable box designed to conceal wires leading to various devices. For instance, I've hidden long cables inside it that connect to the Speeder Pad attached to the 3D printer. To adjust its dimensions, you'll need to…
Here is a short video showcasing print usage:
Kurze Version (nur Rasierpinselhänger) und lange Version (mit Schale) möglich. Das Model habe ich in PLA gedruckt. Es kann angepasst werden. Die wichtigsten Parameter sind: InnenDurchmesserRasierpinselAufnahme (Aufhängung Rasierpinsel,…
This is a parameterized version of my Stripes playmat tube. Releasing a parameterized version was one of my goals originally, but I abandoned it some time in the middle. I recently recieved a request for the Fusion 360 files to be able to…
english Mud flaps Simple mud flap for bicycles. Mounted on the mudguard under the bracket that attaches the mudguard to the axle. This only works if such a bracket is available. My myvelo-Rio has such a bracket. For other bikes with such…
Needed a solution to organizing / storing drinking straws (drawer isn't an option for us; my wife wanted them where she keeps the insulated cups). Pulled together this straw caddy in OpenSCAD. Customizing: To make wider or less wide,…
Simple OpenSCAD file to generate Flower plots. Several parameters are available to change shape, size as well adding text.
The Abus EaZy KF only supports tube diameters up to 36 mm. For tube diameters greater than that, open up the Abus EaZy KF.FCStd file with FreeCAD, input your tubeDiameter, and presto! print out the top and bottom parts. Unscrew the holder…
This is a belt tensioner I developed to assist in tracking down vibration problems on my printer. It has [may have] a knurled knob for reproducible adjustment. Update 03 April 2018: Modified to work with 20t toothed idler, M3 or M5…
If you live an a house or apartment with old windows with tracks, you may be using the classic $3 security trick of placing a dowel rod in the track to prevent someone from easily and silently opening the window. But it's always been kind…
EDIT (2/10 3:56PM) : The Thingiverse Customizer is being cruel to me today, I have no earthly idea why, but when it renders my object it screws up the tickmarks for the hours and minutes of the day. I'm going to keep banging my head to…
I needed a base to mount my future DIY door lock, so I started with a replacement bezel to not break the original one. Like most of my models, this one's a fully parametric OpenSCAD model. All parameters are described in the OpenSCAD…
I created this to make 8mm LED strip clips and a PI camera cable clip. The current settings are what worked well for an LED 8mm clip.
I had help with the adjustable parameters. This adapter can have threads inside or outside or neither on either end. Diameters and other details like wall thickness can be changed through the parameters. The uploaded f3d file has 4mm wall…
Very simplistic parametric sanding block for outside radii. Useful for sanding dowels, outside curves, etc. I use it for sanding miniature bases. FreeCad model included. If you customize the model make sure you account for the thickness…
This covers the top of the rails of my 20' Louisville extension ladder. I printed it in TPU to stop the ladder from scarring the house. The openscad file has been parameterized so that the width, height and depth can be adjusted to fit…
My wife asked for a soap dish that would hold the soap up, nearly vertical, out of the drippings. She wanted it to be easy to clean and not require a specific orientation with respect to the sink. I looked through literally a thousand…
This model is a parameterized OpenSCAD program to create threaded adapters that can be utilized to make your standard filament spools reusable. After printing a set of these adapters, one can cut an empty spool in-half, install these…
The STL file is designed for Galaxy S20+ for other phones and chargers you can customize the attached cadquery code.
Remix with cutom parameter size 66%
This model is primarily designed for holding HelloSmile (HiSmile) toothpastes, but it can be use for any tube types and sizes. It allows easy water draining. It is fully parameterized, allowing you to change diameter, height and number of…
🧰 Title: Coin holder & COB flashlight 2-in-1 — for Ukrainian Hryvnia coins 📄 Description (English for Printables): This is a hybrid coin holder and COB flashlight , designed specifically for Ukrainian iron coins: ₴10, ₴5, ₴2, ₴1 . 💡…
Turn any bottle that comes with a pump into a squeeze bottle. Save yourself time and money by using everything.
Inspiriert durch eine Batteriebox die ich im Netz gesehen haben (ich finden den Link leider nicht mehr -> wer ihn sieht bitte melden) habe ich in Freecad eine Box für drei Batterien konstruiert bei der man in der Tabelle die Daten der…
If you lost one or more piece of your boardgame, you can reprint it here. In Fusion360 you can edit the number via Parameters. Don't throw your game away, complete it again and play!
I found that a bunch of the tools that I carry in my Think Tank Photo FPV Airport Helipak Backpack for Quadcopters kept slipping out of the handy elastic bands because they were too thin. Often times, the tool I was searching for was lost…
!!! Just printing the files will fail. Please note the instructions on deleting unused stud/antistud sizes !!! The challenge in printing interlocking bricks is to get the tolerances right for both studs and antistuds on a given printer,…
Use as a sorting tray or portable caddy. Compartments are adjustable. Use openscad to set parameters. Outer dimensions are roughly inner + wall thickness. Parameter Default Description inner_x, inner_y, inner_z 140,240,50 Inner Dimension…
Import oder Export der User Parameter einer Fusion-Datei in eine CSV-Datei. Beim Importieren werden bestehende Parameter aktualisiert und nicht vorhandene Parameter angefügt. Das Attribut für Favoriten wird berücksichtigt. Installation:…
I didn’t want to drill holes in my rented apartment, but I still wanted to secure a mirror so that a child cannot accidentally lift it off the hooks. Probably the only way to do this is to use the hooks themselves as a clamping point.…
The attached STL will work with Craftsman precision pliers like as shown in the pictures. All other pliers will need to be adjusted for height, width, and depth for your pliers.
EDIT (2/10 3:56PM) : The Thingiverse Customizer is being cruel to me today, I have no earthly idea why, but when it renders my object it screws up the tickmarks for the hours and minutes of the day. I'm going to keep banging my head to…
What's this thing for? This part is designed to be installed in a hole in your drywall and to allow cables to pass invisibly from behind a TV, into the the wall, and back out into the back of your entertainment center where your receiver,…
Parameterizable IKEA SKÅDIS batteries dispenser. Attached CAD file (FreeCAD) allows to easily change the size of the dispenser, as well as to make dispensers for different battery types. Pre-cut STL/STEP files are for AA / AAA / 18650…
This covers the top of the rails of my 20' Louisville extension ladder. I printed it in TPU to stop the ladder from scarring the house. The openscad file has been parameterized so that the width, height and depth can be adjusted to fit…
This is an OpenSCAD implementation of the openGrid system. This is a very basic implementation and it's missing some notable features, such as connecting pegs. I'm happy to add features as requested.
I didn’t want to drill holes in my rented apartment, but I still wanted to secure a mirror so that a child cannot accidentally lift it off the hooks. Probably the only way to do this is to use the hooks themselves as a clamping point.…
On busy days, I would often lose track of whether I'd taken my daily prescriptions. This organizar/tracker prevents that. There are 4 versions, holding 2-5 standard-size prescription bottles (39mm diam, 71mm tall), and a rotating dial…
!!! Just printing the files will fail. Please note the instructions on deleting unused stud/antistud sizes !!! The challenge in printing interlocking bricks is to get the tolerances right for both studs and antistuds on a given printer,…
Mom wanted something to hold her quilting rulers and, by Jove, I wanted to be a good kid and make Mama happy. I didn't know what the optimal dimensions were so I put together a model I could iterate on. Changeable parameters ( Autodesk…
After testing, remixing, and trying various versions I decided to create my own. Adaptors that use pin mounts to attach to the holes on the cardboard were too restrictive by both hole size and spool diameter. This model is extremely…
This is a soldering jig for WS2812B pixel LED lights. All the models I found were locked into a specific wire size, so I spent the afternoon making one that we could modify the wire width on. I have confirmed this works with 1.4, 1.3,…
