Counting matching models…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names. I printed this using Hatchbox PLA on the Bambu X1C…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
I could not find a ready made case, so I decided to design something by myself the case is for the Makerbase MKS TS35 V2.0 touchscreen (shipped with MKS robin nano V3) it is the one with a control button but no reset switch maybe someone…
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
Case for the Raspberry Pi 4 with a 3.5" TFT display module. Enlarged holes around micro HDMI ports to facilitate cables with larger ends, adjusted positioning of port holes, and added a view slot so the PWR and ACT LEDs can be easily…
The Raspberry Pi 5 having been released, I remixed this model : https://www.printables.com/fr/model/44218-7-touchscreen-case-for-raspberry-pi-4-internal-fan to make it compatible with the Pi 5. The zip contains the top and bottom of the…
The case comes in 5 parts: Frame for the LCD Middle flatpiece Raspberry Pi cover (snap-fit*) two legs The LCD frame is pretty tight fit so make sure your printer is properly tuned. You need 4x M3x6 screws to mount the flatpiece to the LCD…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…
This model adds a bezel and stylus to the screen of the printer. The stylus stops fingerprints smudging the screen. This model has a pause in the stylus print to add optional magnets to hold the stylus in place. There is also a logo on…
update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…
Has been tested on 2 different screens to confirm tolerances. Tested Print settings- 0.2 Layer Height, 30% infill, printed back to face of build plate. To confirm the exact GeekPi 7 model I used here→ https://a.co/d/cPXtGqt I used 4 -…
This is a component part of a 3D Printer enclosure project Hi Makers! After months of discoveries in the happy world of 3D modelling and printing on Thingiverse, time has come for me to share my first thing. It is a three parts enclosure…
I designed this enclosure so I could mount my touchscreen in my car connected to a raspberry pi running navit, but it would also be great in your workshop. It fits a Hamtysan 10.1" touchscreen…
…Please be sure to hit like & post a make, I'd love to see your prints! UPDATE: Model for BTT TFT50 PI SCREEN V2.1 ADDED!! LATEST VERSION!! IMPORTANT NOTE!!! The newer V2.1 screens have 3 buttons instead of a switch & brightness wheel.…
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 5 *** New case for Raspberry Pi Touch Display 2 *** NEW: Alternative slim version for the new Raspberry Pi Active Cooler Required models from 7" Touchscreen case for Raspberry Pi 4 +…
I needed a little stand to hold my Raspberry Pi Touchscreen on my desk while I'm working on software for it. You need to print two of the legs. It needs four M3 screws to attach the them. M3x10mm screws will work but M3x12mm with a washer…
This case is designed around the following: Freenove FKN0078 7" Touchscreen Raspberry Pi 4 Model B Geekworm P165-B 11mm heatsink for the Raspberry Pi 4 Model B Assembly requires the following hardware 4x M2.5 x 15mm screws 4x M2.5 x 10mm…
This is a wall mount for the Raspberry Pi 7" touchscreen. I originally designed this so I could replace my old alarm system panels with a central control panel for Home Assistant. It also has a DHT22 sensor so I can monitor temp/humidity…
Introduction Quite a few people keep their Snapmaker U1 close to the floor which makes the touchscreen a bit harder to see and use. This mount allows tilting the touchscreen upwards for better visibility and usability. This is not an…
5 inch Touchscreen and Raspberry Pi Case for mounting to Creality Ender 3 V2/S1/S1Pro (and possibly others) This replaces the stock screen on your compatible Ender series printer. This allows a 5" DSI TouchScreen and Pi 3b/4 to mount to…
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
with the clicky clacky door the lcd screen is hidden under the door making it hard to see and use the screen. this will pull the screen out so its in plain view again. this is intended for the Waveshare 4.3 lcd screen (ldo kits include…
This remix was requested by Stefan Raatz , who desired a case for holding an SKR 1.4 Turbo (instead of SKR 1.2 Pro), as well as a Raspberry Pi 4 model B. Quick heads up: These remix designs were somewhat “intended” for the case being…
Monitor Case for Elecrow 7" inch touchscreen monitor . Bigger cutouts for HDMI & USB allow better access. Switch that can operate the backlight switch on the board. 4 off M3 x 12 screws used to hold the case together I used Nylon M3 I…
Make sure to refer to the original model for missing parts. You will also need two thumb screw knobs. Refer to this model for more information on thumb screw I used:…
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Case for HMTECH 10" Capacitive Touchscreen I recommend PLA over ABS to avoid issues with warping, especially if using a Prusa MK3S, because the model goes all the way to the edges of the print bed. **In order to make it fit in the print…
May fit other Anycubic 3D printer models: Kobra Plus, Kobra Max and Vyper.
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
This remix was requested by Miguel Arellano , who desired a 75 mm extension of an existing control box's lid and base, in order to house a Raspberry Pi 4 model B, so he can run Octoprint. Quick heads up: These remix designs were somewhat…
I created this wall mount so I could use the Waveshare 10.1DP-CAPLCD touchscreen for a home assistant dashboard. It is designed to mount to a 3-gang electrical box. Update for V2 I ended up relocating my raspberry pi out of the wall, i…
Available both in STL and STEP for easy editing. We would love to see your creations, so feel free to add them as remixes to this file. The red indentations on the backside shows the magnet location: The yellow indentation on the front…
Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…
NORSMIC Raspberry Pi Screen, 7 & 10.1 inch Monitor Frame - Required (new) hardware: 2 - M3X16 Flathead - Stainless screws 2 - M3X16 Flathead - Stainless screws 2 - M3 Hex Nuts - Stainless I also printed and shown in photos this model:…
his is a pretty minor tweak of wojciechsura's excellent 7" Waveshare case (thingiverse link) for folks with a "Longrunner" (or similar) brand. The two appear to be identical, but the dimensions are slightly different and the Longrunner…
This is a simple mount to install a Waveshare 5" DSI Touchscreen to your Prusa Bear 2.1. To use it, you require: 1x Screen 1x Raspberry Pi 3B(+) or 4B 4x M3x10 screws Mount the Pi on the Screen without the standoffs. Carefully make sure…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Simple bolt used to hold the screen in place for the Gaggiuino
Rear case for the Hosyond 7 Inch IPS LCD Touch Screen. Screen: https://www.amazon.com/gp/product/B0BKGCB18T Screen being used for KlipperScreen, works great. Follow me on twitch https://www.twitch.tv/mastamo0n! :) Edit: I'm sitting the…
Hi, in my last project I made a case for raspberry pi. Small PC needs small display! So I bought a tiny 7-inch touch display and designed an enclosure. Building guide: YouTube Materials I used and links to buy 1024*600 7-inch touchscreen…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
An enclosure to house your Raspberry pi 3 or 4 running Venus OS and a DSI 5" touchscreen, to be mounted next to other Lynx modules, made from the original Victron Lynx distributor enclosure model. I made this model for my own using and…
I printed mine on its side, but do what you think is best for your setup. there are also mounting holes for a raspberry pi, but would need some offsets of some kind.
You will also need: Raspberry Pi (2B, 3B, 3+B, 4B) 7 inch official touchscreen 6x M3 nut 4x M3x25 screw 2x M3x10 screw 4x M3x5 screw 4x M2,5x5 screw 5x 18650 battery 94v0 powerbank circuit board ...or 0396A battery charging module Print…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Print both models front face down so that the knob and lid will have the best chance of getting a smooth and nice surface, with black ABS i could almost get a color match to the paint on the base. The lip around the side will keep the lid…
Re-modelled and extended to cover the battery hat I use.
EdgeTX , a modified Firmware and a Radiomaster TX16 touch enabled screen make it possible for the FrSky Horus X12S radio transmitter to also have touch functionality. The increased thickness of the touch enabled screen though makes it…
Alternative xLCD cover with improved looks. Enables to reach the corner parts of the display more easily for better touchscreen experience. There were several xLCD versions shipped with the printers. Mainly, a bolt pattern differs. Check…
I made this case because I could not find one that fits my needs. I use this setup for a beer fermentation controller, for this reason, the current version only has an opening for the micro USB connector and another opening for the 1-Wire…
Touchscreen stylus with hanging loop
I remixed this design to mount my 3.5 touchscreen and a Raspberry Pi 3B+. The mounting holes for the RPI are oversize so I could use some M3 screws I had here. You will either need to open up the holes in your PI or make the ones smaller…
Hello I am currently testing some things with Arduino touchscreens and have soldered a board and built a case for it. I left a gap for the USB port and the SD card slot of the display. I used a 3.2inch ILI9341 TFT LCD Touchscreen and use…
Bought the cheapest Raspberry Pi 5" display on Amazon and then realized that no other 3D model support this model, so I had to make my own. The case features a slim design, brightness button and ribbon cable cutouts and a mounting system…
When upgrading the main controller board to a Bigtreetech Manta e3eZ (or other Manta board) with a CB1 computer a new touchscreen is also required, as the stock Ender 7 screen is not compatible. This screen surround is for the BTT HDMI5…
the mount for the frame should be in petg the rest is pla you need : 4x m3x10mm 2x m3x14mm Material:PLA,PETG Printer Prusa Mk3S+
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
RubberDACy, a Hifiberry concept case.. Hi, this is my first dive into 3D modelling and complete 3D printing project that met my needs. I couldn't find a complete Hifiberry case that included support for the 7" touchscreen and thankfully…
A basic case for a RPi 3A or 3A+ with a 3.5" GPIO touchscreen. It's perfect for a klipper / klipperscreen setup. I used the display from this kit, but any 3.5" 480x320 GPIO display module should work : https://www.amazon.com/dp/B08864L7N3…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
Updates: 2026-10-04: Fixed a similar, but even bigger error with the STL generated for the front left riser (with thermometer only.) This STL is now correct. Thanks to @LoveM1lk_5279456 for reporting. 2026-05-05: Fixed an error with the…
This remix was commissioned by a fellow V1E maker, Deadlystrike (username on Printables). Also, this listing's lid got remixed without the hold on top for TFT, as requested by a fellow V1E maker, @Mike_2205479 :…
This model is a remix of Loogle's Gaggia Classic / Pro touchscreen enclosure. That model is a remix of a project from LikeableBump. Consider visiting these projects and liking them!…
I have my 7" Raspberry Pi Touchscreen oriented vertically which does not work well with the original case design. Uses 4 M3x12 screws to attach using same mounting holes as the case. Made to provide access to all necessary ports, but USB…
A case designed for the original Ender 3 a Raspberry Pi 4B and a 3.5" TFT screen that connects via the GPIO pins. It also comes with a holder for the stylus that comes with most of these screens. The holder snaps onto the stylus and holds…
This is a case for the 3.5 inch ILI9488 TFT Screen from Hosyond, where the pins (for the screen itself) are all on one side. this will NOT WORK for hat-style screens. The case itself provides a small lip to slide the screen and it's pins…
About this Case for the Heltec Touchscreen This case is easy to assemble , and wraps your Heltec v4 WiFi LoRa 32 Expansion Kit (touchscreen) inside a protective enclosure that provides easy access to the power and 35 buttons (wakeup…
I designed this to hold an EVIVIV 7-inch touchscreen that I got from Amazon (https://amzn.to/3krIcRk). It's a pretty nice little screen and is made for a Raspberry Pi to mount to the back with everything you need to hook it up in several…
Hey all, I've been using the excellent Logitech Media Server for a couple months now to play music all around my home and I’m really pleased with the experience. I have LMS players in almost all rooms, but I missed having it at my desk so…
Print in the finest setting possible to make sure the screwholes come out right. Model is designed so it does not need any supports at all when you print it on its side (the side that attaches to the printer needs to touch the print bed).…
A touch screen stand so your DWIN touch screen may stand alone from the printer itself. I printed this because I have a CR-6 DWIN touch screen on my Creality CR-10 Smart with BTT SKR board and I like the touch screen better when it is…
Fits on top cross bar with 3mm screws and t-nuts. I fount that the bowden tube and wiring could get snagged on the mount. So V2 has rounded edges and dose not sit flush with bottom of the 20x20 extrusion. Print Settings Rafts: Doesn't…
Hi, update: added a loosen version of the adapter part I designed this wall mount fot this Raspberry Pi 7 inch Case https://www.thingiverse.com/thing:1585924 The Pi with the Screen have a weight about 400g. So you dont have to print the…
This is a remix of https://www.prusaprinters.org/prints/69731-hyperpixel-4-touchscreen-lcd-raspberry-pi4-for-oct It just lacks the power button opening. See the original for all the files (Pi enclosure, brackets, …)
Official Raspberry Pi 7" Touchscreen Display Framefor IKEA Lack enclosure. If you have Official Raspberry Pi POE hat, use RaspPi-ScreenOffsetMount.3mf
The touchscreen stand from McMatt ( https://www.prusaprinters.org/prints/15208-raspberry-pi-touchscreen-stand ) is great, but unfortunately only for one orientation of the screen. I have adjusted the support lip of the screen and the…
I've made a short video about this enclosure here: https://www.youtube.com/watch?v=KwfX0tTKoT0&lc=Ugz9CeK5zrpN7btUBod4AaABAg This enclosure is designed to fit a raspberry pi 3 and the official 7inch touch display. The brackets are…
Turn your Raspberry Pi 2 and Raspberry Pi 7" Touchscreen into a completely custom tablet. This design is still a work in progress. Cable lengths and required hardware have not been tested/determined. Work is still on going to find a…
This is an enclosure for the relatively cheap 7 inch touch display with an embedded ESP32-S3 processor. I use it on a stand to have a dashboard for my home battery system setup. But you can also mount it on the wall in any orientation you…
I really liked the OSOYOO 5 inch touchscreen. Works perfectly with Raspberry and is available here in Germany from Amazon. Couldn't find the perfect display mount for this display, so made my own. My printer was a 300x300 LDO Kit. So the…
Pusa LCD and 3.5 Touchscreen Housing for Enclosures Because all the LCD housings, I found are open at back, I designed a closeable one with clickable backplate. Screw backplate to enclosure then click it on. The Touchscreen mount is for…
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4. Should point out that the source CAD file is not my own work. Also that this is probably quite inefficient in terms of filament usage What I did modify was to make the slot for the…
I needed to mount my touchscreen and did not need a full blown case. 15 degree bracket for 11/2022 generation of RPI 10.1" touchscreens with top and bottom mounting lobes. I have the NORSMIC 10.1’’ 1024x600 version. This can be clamped or…
4/21/2020 - Updated location of ribbon cable cutout. Should fit without interference. Let me know if there are any problems. This mounts a 7" Raspberry Pi touchscreen to any printer with 2020 extrusion. This is a frankenstein project…
Raspberry pi display (official) - 7 touchscreen Support for Flsun SR on Klipper For the mainboard spacer you can find'it here https://www.thingiverse.com/thing:4936100
The model from Puckpuck is awesome but I needed a little more room to allow space for the little U-shaped jumper that connects the HDMI port from the touch screen to the Raspberry PI 4 I was using. Because of the increased size of the…
I wanted to make an easy touchscreen holder for kids (and adults) to easily have a phone accessible and thought a bracer/gauntlet would be the way to go. I am still learning CAD so this is very rough, did I mention very rough concept? lol…
When upgrading a TwoTrees printer to Klipper the original MKS TFT35 display is not compatible (at least I found no way of using it). However, common 3.5" Raspberry Pi touch screens are exactly the same size and work fairly well with…
This is an arduino ILI9486 touch screen case with a battery. The screen with it can be used to control Arduino / ESP devices in your own project. Necessary things: Arduino or ESP32 Screen ILI9486 Battery Li-Pol TP4056 battery charging…
Wdeck is a DIY stream deck you build yourself: a 3.5" touchscreen with 15 keys on an ESP32, a 3D printed case and a free Windows app. Every key shows its own picture or GIF and runs whatever you put on it: hotkeys, programs, websites,…
I searched a few sites for an existing model and could not find a model that supported this specific 5inch touchscreen (model: XPT2046) with a Raspberry Pi 4. The model does not require any supports during print. Additional screws are…
Frame for SunFounder 7 Inch Touchscreen Display found here: amazon.com/gp/product/B07Y889J3X/ 4 M3x8 screws and the included 4 M3 screws spacers are used to secure the front and back together. Print Settings Rafts: No Supports: No…
