Liczymy pasujące modele…
Object Description: It comes too late for the prusa design contest end of 2021, but here's my version of a bag clip. Advantages: - Stable hinges - Wobble-free hinge design - Easy to close - It clamps reliably even thin bags - Marble…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I like rotating kinetic sculptures. For this reason I transferred the typical appearance to button size. The button showed on the photo was printed with a 0,4mm nozzle. A 0,2mm nozzle would be much better, of course. It is printed with a…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
Object Description: This is the reinforced Version 2.X of my bag clip with automatic snap-in mechanism. Basically it was already a solid design, but even the strongest part can be improved. Recently my wife showed me our first broken bag…
Object description: This wire stripper is as the title says, a tool which cuts in the outer insulation of a cable that you can easily peel it off. I made the experience that a lot of professional tools work with a spring mechanism and cut…
General information Version 2 with a slightly reinforced clamping section is out. See here: https://www.printables.com/de/model/234619-bag-clip-v2-with-automatic-snap-in-mechanism Object Description: Inspired by our bought bag clip which…
Object Description: Orange peeler. Using the front side, cut the peel into several pieces. Lift it with the flat end of the peeler and remove the pieces. If you need a version with a lower cutting depth or any other modification, don't…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. So you can store a maximum of 144 batteries, if you really want. Update 2024-02-24: Corrected models uploaded.…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. Each segment stores 9 batteries size AAA. So you can store a maximum of 225 batteries, if you really want. Update…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Object description This is a modified i3 MK3S+ fan shroud which can be assembled in a i3 MK3S. The i3 MK3S+ Design has longer cooling wings for a better cooling as the fan shroud for the i3 MK3S. Print settings: Material: High-temperature…
Object description: Geometric sculpture no. 02. Print the parts in the suggested direction. If required, paint on support is already defined, also modifiers for infill and perimeters. The parts can be simply plugged together. Glue is not…
Object description: Cute Mini Deadpool. Notes: The model already includes paint-on support structures as well as paint-on coloring. It can be printed as single color or multi color version. I added a hole in the center of the base for the…
Object Description: This is a print-in place storage box for E3D Revo Six nozzles. Following versions can be downloaded: 4 nozzle version for brass nozzles 0,25 / 0,40 / 0,60 / 0,80 5 nozzle version for brass nozzles 0,15 / 0,25 / 0,40 /…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 1 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 0,9 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Object Description: A pattern cookie cutter that doesn't need to be rotated when used. Position the mold at the existing contour line. This way, there is minimal “waste” only on the outer edges of the dough. If you like this model, you…
Object Description: This is a collection of gear racks with a pressure angle of 20° and the following modules: 0,7 / 0,8 / 0,9 / 1 / 1,25 / 1,5 / 2 / 2,5 / 3 / 4 / 5. You can easily modify this basic models for your needs with slicer…
Purpose: This is a sanding tool for the drill with a hexagonal connection for a better torque transmission. I know, there are some similar tools already available, but I couldn't find one which fits to the thickness of my sandpaper. For…
Object description: A cap in two sizes for Gardena connectors to protect against dirt in winter and to protect the sealing ring from curing due to UV radiation. Simply slide the cap over it. The snap-in function guarantees a secure fit.…
Object description: This is a upright standing drill bit case. The two hinged covers allow easy access to the drill bits. A hole on the top can be used to hang the case on a hook. A gridfinity holder is also available to store the case in…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 2 and 12 to 51 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…
Object description: Geometric sculpture no. 08. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. Number of parts…
Object description A set of circlips acc. to DIN 471. Various sizes for shaft diameter 3 - 70mm. If you need another size, please leave a comment. Update from 2025-03-24: Sizes dia. 31 - 70mm added. Links to the other circlips of this…
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
Object Description: This is a decorative cute owl, number 1 from a set of 3. Link to owl #2: https://www.printables.com/de/model/260790-cute-owl-2 Link to owl #3: https://www.printables.com/de/model/260791-cute-owl-3 Print settings:…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
Object description: I made some new symbols based on the cable tag design from Alego. Update 2023-11-02, new symbols added: Drilling Machine Jigsaw Table Saw Chop Saw Hand Circular Saw Flex Compressor Available Cable Tag Symbols here:…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 3 and 12 to 51 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 1,5 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Purpose: This is a replacement for a Festool jigsaw splinter guard. Reference to original part: Festool article-no.: 490120 Fits to PS 300, PSB 300, PS(C) 400/420, PSB(C) 400/420 Comments: The splinter guard shown in the title was the…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
Object Description: A pattern cookie cutter that doesn't need to be rotated when used. Position the mold at the existing contour line. This way, there is minimal “waste” only on the outer edges of the dough. If you like this model, you…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 0,8 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 0,7 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 5 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…
Object description: Tool for lubricating LM8UU bearings. Since many people ask for a screw cap in combination with the bearing pacifier from David Honza, here it is. Handling Instruction from David Honza (nothing to add from my side):…
Object description: This battery holder fits to the Gridfinity System. The provided sizes are from 1x1 up to 5x5 segments. So you can store a maximum of 70 batteries, if you really want. Update 2023-10-14: Added document “Gridfinity - an…
Object description A set of circlips acc. to DIN 472. Various sizes for bore holes diameter 8 - 70mm. If you need another size, please leave a comment. Update from 2025-03-24: Sizes dia. 31 - 70mm added. Links to the other circlips of…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 1,25 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Object description: Marking ruler with 1mm steps. The bores have only 1,2mm diameter, to fit best to a 0,5mm TK pencil. If you need bigger bores or conical bores for thicker pencils, don't hesitate to send me a message. It's not a big…
Object description: Geometric sculpture no. 09. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. If you want this…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
Object description: Allen key holder for size 1,5 / 2 / 2,5 / 3 / 4 / 5 / 6 / 8 / 10mm. The model is supplied in two versions. Version 1 - with 2 constrictions in each hole. In this version the Allen keys are securely held in every…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 4 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm thick.…
Beschreibung: Befestigungsschraube- und Mutter für das Kehrteil zum Vileda Superfeger. Kommentar: Die 3mf-Dateien sind geometrisch identisch zu den STL-Dateien, beinhalten jedoch bereits variable Schichthöhen. Druckeinstellungen:…
Object description: LEGO - ID 3941 - Rundstein 2x2 - compatible replacement part including support structure. Important notice: The published one suits my needs best. However, I have found that the press fit of the axles varies. So if you…
Object Description: This is a collection of spur gears with a pressure angle of 20°, module = 2,5 and 12 to 40 teeth. You can easily modify this basic models for your needs with slicer functions only. For example: all models are 5mm…
Object Description: This SkipBo box is easy to open and close. But the closing mechanism reliably keeps the box closed. The box also offers old, thicker cards enough space. The hinge-pins are designed to have a slight press-fit. This…
Object description: This LCD knob can be rotated in a wide range of angles from all sides. A video how it works you can find here: CV Joint Knob Video . But please note, that the fit of the main part on the LCD was a bit wobbly with this…
Object description: Grinding fixture for resharpening a Viking Blade 6008 702 0121 and similar garden shredder blades. The fixture fits on all wet grinders with a 12mm rod like from Torrmek, Scheppach, Güde, Einhell, Holzmann, Weldinger…
Object description: My daughter wants to have everytime some cotton buds in her bag for cosmetic corrections. For this reason I designed her a small container to transport a maximum of 7 unused and 7 used cotton buds. Comments: The…
Object description: Geometric sculpture no. 01. Print the parts in the suggested direction. If required, paint on support is already defined, also modifiers for infill and perimeters. The parts can be simply plugged together. Glue is not…
Object Description: A decorative vase with an octagonal pattern that turns into a diamond pattern in the narrower section. I've linked the solid version for a vase mode print and a second version with a 4mm thick bottom and 2mm wall…
Object description: Soft jaws for the 300mm Knipex 86 03 300 Pliers Wrench. Replacement for original Article-Nr. 86 09 300 V01; EAN 4003773085812 Please note that the soft jaws on the photo look slightly different to the published design.…
Object description: Whenever I had to lift my water grinder with its 13 kg weight to turn it 180° from grinding to polishing position and back, I thought of a relief in the form of a turntable with a locking mechanism. Well, here it is.…
Purpose: As the title says, with this holder you can mount a Philips Hue Hub under a desk or similar. The bottom is open and allows cable connection. The front allows to push the button and the view to the signal lights. I printed it…
Object Description: This is a decorative cute owl, number 3 from a set of 3. Link to owl #1: https://www.printables.com/de/model/260377-cute-owl-1 Link to owl #2: https://www.printables.com/de/model/260790-cute-owl-2 Print settings:…
Object Description: This is a replacement tooth for the above mentioned game. Please note that this tooth fits to an older version of this game where the teeth have to be pulled out instead of being pushed in for the newer version. Please…
Object Description: This is a decorative cute owl, number 2 from a set of 3. Link to owl #1: https://www.printables.com/de/model/260377-cute-owl-1 Link to owl #3: https://www.printables.com/de/model/260791-cute-owl-3 Print settings:…
Object description: This Gridfinity bin for Ruthex threaded insert tips is supplied in two versions. Version 1: with stacking lip Version 2: without stacking lip I don't like the variants with glued-in or firmly pressed-in magnets. That's…
Object description: Every year the same problem. 3D stars or big baubles are beatiful but need a lot of space for storage. For this reason I designed a modular system. It's easy to assemble and disassemble. Welcome to the Modular 3D…
Object Description: This is a replacement part for the children's game “Tempo, kleine Schnecke” from Ravensburger Games. Print settings: Material: PLA, PETG, ABS/ASA, whatever you want. Layer height: 0,2mm Nozzle diameter: 0,4mm Infill:…
Object description: A clip with a counterbore to mount a Philips Hue Lightstrip. Uploaded on request by @BucksWoodshop_506405. Recommended print settings: Material: PETG, ABS/ASA, PLA Resolution: 0,2mm Infill: doesn't play a role…
Object description: I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit. Base models are…
Object description: Geometric sculpture no. 12. The model files includes variable layer height already but can be redefined of course. Links to the other sculptures of this series: Geometric Sculpture #01: Link Geometric Sculpture #02:…
Object description: The next winter is sure to come. To ensure that the water in the garden hose and other outdoor irrigation pipes doesn't freeze, I briefly connect a compressor to the hose and blow out the residual water. Connection…
Object description: Geometric sculpture no. 07. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. Number of parts…
Object Description: This suction nozzle fits a Dyson vacuum cleaner hose. Outer diameter of the tip: 12mm, Tip length: appr. 75mm. Connection outer diameter to the suction hose: 34mm. If you need a nozzle with different sizes, don't…
Object description. This is a soap dish for a corner shower. Version 1 can screwed on the tiles on the wall. In case you are not allowed to make bore holes into the tiles you can use version 2 which can be simply glued on. If you need a…
Object description: A Lion with Coat of arms shield emblem at Trmice chateau in Czech. More to see here on Google Maps: Link Recommended print settings: Material: PLA, PETG, ASA/ABS. Resolution: <=0,2mm Infill: 10% Perimeter: 2 Brim: no…
Object description: Remix of the original part “Wifi_module_cover_R1”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The…
Object description: One of a pair of lion statues at the Southern entrance to Heaton Hall, Manchester For more information on Heaton Hall and the park: https://en.wikipedia.org/wiki/Heaton_Park 3D scan generated by Lee Robert McStein…
Purpose: We recently got a new surface for the balcony floor. This is resistant to everyday wear and tear, but we got warned that rust stains are not completely removable. So a stainless clothes drying rack became necessary. Most…
Object description: This is an expansion plug for fixing a toilet seat brand “Cornat”, Premium series. So far, I have only reconstructed the plastic parts in case I need to replace a broken part at some point. I have therefore not tested…
Object description: Geometric sculpture no. 05. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. A multi-colour…
Object description: This assembly stabilizes a cyclone and protects it from breaking off from the collection container due to too much pull on the suction hose. Comments: Don't be fooled by the attached photo. All the dust on the cyclone…
Object description: Every year the same problem. 3D stars or big baubles are beatiful but need a lot of space for storage. For this reason I designed a modular system. It's easy to assemble and disassemble. Welcome to the Modular 3D…
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
Object description: Geometric sculpture no. 06. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. Number of parts…
Object description: Remix of the original part “el-box-cover_R4”. Please compare the revision number with the original part before printing. Let me know if this has changed so that I can provide an update as soon as possible. The NFC…
Object description: Every year the same problem. 3D stars or big baubles are beatiful but need a lot of space for storage. For this reason I designed a modular system. It's easy to assemble and disassemble. Welcome to the Modular 3D…
Object description A slim, elegant stand for the Rubik's Cube. You can scale it to your needs. The side length of the open triangle is 35 mm at 100% scale. Recommended print settings: Material: PLA, PETG, ABS/ASA Resolution: 0,2mm Infill:…
Object description: Geometric sculpture no. 10. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. If you want this…
Object Description: This Dial Indicator Box is easy to open and close. But the closing mechanism reliably keeps the box closed. The box fits the following dial indicator, but should also fit other similar dial indicators:…
Object Description: Replacement parts for the children's game COLORAMA. An educational game with different shapes and colours. Update 2025-02-19: Pentagon added. This form is additionally available in an old variation of this game. Print…
Object Description: Salt refill funnel for Bad Reichenhaller 500g can. If you need this funnel with a different outlet contour, send me a small sketch and I can create a new variant. Update from 2023-02-04 Added a model that already has a…
Object description: I don't like the variants with glued-in or firmly pressed-in magnets. That's why I designed a variant that makes it easy to push the magnets in and out, but at the same time guarantees a secure fit. Comments: Models…
Purpose: This adapter allows to connect a Festool suction hose with inner diameter 27mm to the dust collector of a Fein Multimaster tool. Comment: The adaptor fits very tight on the Fein dust collector. Also the suction hose fits very…
Object description: Geometric sculpture no. 04. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. A multi-colour…
Object description: Every year the same problem. 3D stars or big baubles are beatiful but need a lot of space for storage. For this reason I designed a modular system. It's easy to assemble and disassemble. Welcome to the Modular 3D…
Object Description: This suction nozzle fits a Dyson vacuum cleaner hose. The flange fits to the dust bin of a roborock automatic cleaner. In my case a roborock S7. It should fit as well to other sizes, but I can't test it. A comment from…
Object description: Mausoleum Pi Xiu dragon sculpture. Recommended print settings: Material: PLA, PETG, ASA/ABS. Resolution: <=0,2mm Infill: 10% Perimeter: 2 Brim: no Support: yes
Object Description: A decorative vase with a wide base for a safe stand. The octagonal pattern turns into a diamond pattern in the mid-section. I've linked the solid version for a vase mode print and a second version with a 4mm thick…
Object Description: This is a stand for grindstones with nominal diameter 250mm and a width of 50mm. It is a stable but lightweight design of appr. 50g and is designed that even a worn grindstone with dia. 200mm has still 1mm distance to…
Object description A set of circlips acc. to Seeger AK. Various sizes for shaft diameter 16 - 70mm. If you need another size, please leave a comment. A dimensional data sheet is provided in the downloads section. Update from 2025-03-24:…
Object description: Geometric sculpture no. 03. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. A multi-colour…
Object description: Geometric sculpture no. 15. Print the parts in the suggested direction. If required, paint on support is already defined. The parts can be simply plugged together. Glue is not required but can be used. Number of parts…
Object description A set of circlips acc. to Seeger JK. Various sizes for bore holes diameter 16 - 70mm. If you need another size, please leave a comment. A dimensional data sheet is provided in the downloads section. Update from…
Object description: A wire clip to fix plants to a wire. Minimal material costs, secure fixation without slipping on the wire. Various lengths and wire diameters available. If you miss any specific size, please leave a comment or send me…
Object description: Hook for STIHL SHE 81 blower & shredder vac. and other types with the same grip. Recommended print settings: Material: PLA, PETG, ASA/ABS. Resolution: 0,2mm Infill: 15% Perimeters: 2 Brim: no Support: yes, paint on…
