Liczymy pasujące modele…
Eight page-clip bookmarks: Mario, Luigi, Peach, Toad, Yoshi, Bowser, Goomba and Boo. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a character…
Eight page-clip bookmarks: Harry, Hermione, Ron, Hedwig, Dumbledore, Hagrid, Dobby and Sorting Hat. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate —…
Eight page-clip bookmarks: Steve, Creeper, Enderman, Iron Golem, Pig, Sheep, Chicken and Axolotl. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Grogu, Yoda, Mandalorian, Darth Vader, Stormtrooper, R2-D2, BB-8 and Porg. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate…
Eight page-clip bookmarks: Snoopy, Snoopy on His Doghouse, Snoopy the Flying Ace, Woodstock, Charlie Brown, Linus, Lucy and Sally. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
Eight page-clip bookmarks: Capybara in a Hot Tub, Capybara, Capybara with a Book, Capybara with Coffee, Capybara with Headphones, Capybara with a Tangerine, Capybara in a Beanie and Capybara with a Rubber Duck. They print flat, need no…
Give your wall a heroic touch with this Spider-Man-inspired light switch decoration! 🕷 This decorative wall accent creates the illusion that Spider-Man is hanging upside down from a web attached to your light switch, making it a fun…
Eight page-clip bookmarks: Hello Kitty, My Melody, Kuromi, Cinnamoroll, Pompompurin, Keroppi, Badtz-Maru and Tuxedo Sam. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip…
Eight page-clip bookmarks: Stitch, Lilo, Angel, Stitch with Ukulele, Surfing Stitch, Stitch with Ice Cream, Scrump and Pleakley. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
Eight page-clip bookmarks: Pumpkin, Ghost, Black Cat, Witch, Skeleton, Bat, Mummy and Frankenstein. They print flat, need no supports, and slide over the top of a page so the character sits above the book.
Eight page-clip bookmarks: Jack Skellington, Sally, Oogie Boogie, Zero, Santa Jack, The Mayor, Lock and Dr Finkelstein. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is…
Eight page-clip bookmarks: Mickey Mouse, Minnie Mouse, Donald Duck, Daisy Duck, Goofy, Pluto, Sorcerer Mickey and Mickey Ears. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each…
Eight page-clip bookmarks: Spider-Man, Miles Morales, Spider-Gwen, Spider-Man 2099, Wall-Crawling Spider-Man, Green Goblin, Doctor Octopus and Mysterio. They print flat, need no supports, and slide over the top of a page so the character…
Eight page-clip bookmarks: Luffy, Zoro, Nami, Sanji, Chopper, Usopp, Ace and Going Merry. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Batman, Joker, Superman, Wonder Woman, Harley Quinn, Catwoman, Robin and Penguin. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm…
Bring a little Hawaiian mischief to your wall with this Stitch-inspired light switch decoration! 💙 This decorative wall accent creates the illusion that Stitch is peeking out from behind your light switch, adding a playful touch to…
Eight page-clip bookmarks: Iron Man, Captain America, Hulk, Thor, Deadpool, Wolverine, Groot and Black Panther. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8…
Eight page-clip bookmarks: T-Rex, Triceratops, Stegosaurus, Brachiosaurus, Raptor, Pterodactyl, Ankylosaurus and Hatching Egg. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each…
Ten paper clips. Ten pocket monsters. One print plate. A set of 10 flat, one-piece clips with a hand-traced line-art character sitting on top. They work as paper clips, as bookmarks, as planner clips or as tiny gifts — and every one of…
Eight page-clip bookmarks: Goku, Vegeta, Piccolo, Krillin, Shenron, Majin Buu, Master Roshi and Kid Goku. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm…
Eight page-clip bookmarks: Pumpkin Pikachu, Gengar, Mimikyu, Witch Eevee, Pumpkin Bulbasaur, Mummy Snorlax, Pumpkaboo and Drifloon. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
Bring some mischievous fun to your wall with this Minion-inspired light switch decoration! 💛 This decorative wall accent creates the illusion that a Minion is peeking out from behind your light switch, adding a playful touch to any room.…
Eight page-clip bookmarks: Toothless, Toothless in Flight, Light Fury, Hiccup, Astrid, Stormfly, Hookfang and Meatlug. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is…
Eight page-clip bookmarks: Naruto, Sasuke, Kakashi, Sakura, Itachi, Gaara, Kurama and Rock Lee. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Frodo, Gandalf, Aragorn, Legolas, Gimli, Gollum, Nazgul and Treebeard. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Santa, Reindeer, Snowman, Christmas Tree, Gingerbread Man, Elf, Christmas Gnome and Penguin. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is…
Eight page-clip bookmarks: Ryder, Chase, Marshall, Skye, Rubble, Rocky, Zuma and Everest. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Ten more paper clips. Ten legendary favourites. One print plate. Set 2 of the paper-clip family: another 10 flat, one-piece clips with a hand-traced line-art character sitting on top — this time the crowd everybody asks for, from…
Eight page-clip bookmarks: Grogu in a Pumpkin, Darth Vader with a Pumpkin, Bat Mandalorian, Witch Yoda, Stormtrooper with a Pumpkin, Mummy R2-D2, BB-8 with a Pumpkin and Porg in a Pumpkin. They print flat, need no supports, and slide over…
Bring some electric energy to your room with this Pikachu-inspired outlet frame ! ⚡ This decorative wall frame creates the illusion that Pikachu is firing a lightning bolt directly into your power outlet, making it a fun addition to…
Eight page-clip bookmarks: Sonic, Tails, Knuckles, Shadow, Amy, Dr. Eggman, Cream and Chao. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Peely, Loot Llama, Drift, Raven, Jonesy, Fishstick, Loot Chest and Battle Bus. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm…
Thirty dog-breed head keychains. Find your dog and print just that one — every breed is its own STL and its own ready-to-slice 3MF. Akita, American Staffordshire Terrier, Basset Hound, Beagle, Bernese Mountain Dog, Border Collie, Boxer,…
Eight page-clip bookmarks: Ghost Snoopy, Vampire Snoopy, Snoopy on His Pumpkin Doghouse, Charlie Brown in a Ghost Sheet, Linus with the Great Pumpkin, Witch Lucy, Bat Woodstock and Black Cat Sally. They print flat, need no supports, and…
Two spiral gears that mesh and turn, printed as one piece. No assembly, no supports, no pins to push in. The chambers of a nautilus shell, cut clean through, on two gears that drive each other. Spiders and bats hide in the cutouts. A…
Eight page-clip bookmarks: Vampire Mario, Ghost Luigi, Witch Peach, Pumpkin Yoshi, Pumpkin Bowser, Mummy Toad, Pumpkin Boo and Bat Goomba. They print flat, need no supports, and slide over the top of a page so the character sits above the…
🕷 Spider-Man Outlet Wall Decor Bring a little superhero action to your wall with this Spider-Man-inspired outlet decoration! 🕷 This fun 3D printed wall decoration creates the illusion that Spider-Man is crawling out from behind your light…
Eight page-clip bookmarks: Stitch in a Pumpkin, Vampire Stitch, Ghost Stitch, Witch Stitch, Mummy Stitch, Trick-or-Treat Stitch, Bat Angel and Halloween Scrump. They print flat, need no supports, and slide over the top of a page so the…
Eight page-clip bookmarks: Witch Hello Kitty, Bat Kuromi, My Melody with a Pumpkin, Ghost Cinnamoroll, Vampire Keroppi, Mummy Pompompurin, Skeleton Badtz-Maru and Tuxedo Sam with a Pumpkin. They print flat, need no supports, and slide…
Eight page-clip bookmarks: Wednesday, Thing, Morticia, Uncle Fester, Gomez, Lurch, Pugsley and The Addams Mansion. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one…
Eight page-clip bookmarks: Vampire Mickey, Witch Minnie, Donald with a Pumpkin, Black Cat Daisy, Frankenstein Goofy, Ghost Pluto, Sorcerer Mickey with a Pumpkin and Jack-o’-Lantern Mickey Ears. They print flat, need no supports, and slide…
Eight page-clip bookmarks: Eleven, Demogorgon, Dustin, Mike, Will, Hopper, Demodog and BMX Bike. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
Eight page-clip bookmarks: Pumpkin-Head Creeper, Pumpkin-Head Steve, Enderman, Ghast, Zombie, Skeleton, Wither Skeleton and Bat. They print flat, need no supports, and slide over the top of a page so the character sits above the book.…
Bring Adventure Bay to your wall with this Chase-inspired light switch decoration! 🐾 This decorative wall accent creates the illusion that Chase is peeking out from behind your light switch, making it a fun addition to kids' bedrooms,…
He sits on the edge of your monitor and waves at you all day. A chibi Spider-Man desk buddy — a 100 mm sitting figure with the legs left to dangle, so he perches on the top edge of a monitor, a shelf, a bookcase or the lip of your desk.…
Eight page-clip bookmarks: Pumpkin Capybara, Witch Capybara, Ghost Capybara, Bat Capybara, Black Cat Capybara, Vampire Capybara, Mummy Capybara and Trick-or-Treat Capybara. They print flat, need no supports, and slide over the top of a…
Eight page-clip bookmarks: Santa Pikachu, Eevee with a Present, Charmander in a Scarf, Santa Snorlax, Jigglypuff Bauble, Reindeer Psyduck, Piplup in a Bobble Hat and Scarf and Bulbasaur in a Wreath. They print flat, need no supports, and…
Five gears that mesh and orbit, printed as one piece. Turn any one of them and the other four move. A spider web in the middle, four planets around it — pumpkin, witch, spider, black cat — and an outer ring with teeth on the inside. Push…
Eight page-clip bookmarks: Tanjiro, Nezuko, Zenitsu, Inosuke, Giyu, Rengoku, Shinobu and Muzan. They print flat, need no supports, and slide over the top of a page so the character sits above the book. Each clip is one 0.8 mm plate — a…
A cheerful cartoon duck in a sailor jacket striding along under an open umbrella, mid-step across the top of your switch. The umbrella canopy gives the design a wide, graceful arc that balances nicely against the square frame below it.…
The mask, the webbing, and a loop that is part of the print. A compact Spider-Man mask keychain with the full web pattern cut into the surface, not just painted on the front — the webbing wraps all the way round the head, so it reads from…
A young wizard in round glasses and a school robe, sitting cross-legged with an open spellbook on his lap and a wand tucked behind him. Calm, cosy and instantly readable - one of the best designs in the set for a bedside switch or a…
Eight page-clip bookmarks: Santa Mario, Elf Luigi, Peach with a Christmas Tree, Reindeer Yoshi, Santa Bowser, Toad with a Present, Santa Hat Boo and Goomba in a Christmas Hat. They print flat, need no supports, and slide over the top of a…
Add a spooky touch to your wall with this spider web 3D printed decoration! 🕸 This unique wall accent transforms your ordinary light switch into the center of a creepy spider web, featuring a tiny spider dangling right underneath. It's a…
A masked mercenary lounging on the edge of your light switch with a katana in hand and a second pair strapped across his back, legs dangling over the frame. The relaxed, slightly smug pose fits the character perfectly and makes the switch…
The hood, the mask, the scowl. A hooded Doctor Doom keychain where the cowl actually behaves like cloth — it folds over the brow, throws a shadow across the eyes and falls into a collar at the back, instead of being a smooth shell stuck…
Bring some adorable Pokémon charm to your wall with this Eevee-inspired light switch decoration! 🦊✨ This decorative wall accent creates the illusion that Eevee is peeking out from behind your light switch, making it a cute addition to…
A round bat with its wings wrapped round itself and two big ears — and the cleanest print in the set. At 60 % scale it is 46.9 × 60.0 × 58.1 mm and about 28 g of PLA. Wings folded, fangs out, sitting flat. The photos are a real print of…
F1-Inspired Smartphone Stand – Modern 3D Printed Design Bring a touch of Formula 1 engineering to your desk with this unique F1-inspired smartphone stand. Designed with sleek aerodynamic lines reminiscent of a modern Formula 1 front wing,…
Every panel line, at keyring size. The helmet, faceplate and jawline are all cut as separate panels rather than moulded into one blob, which is exactly the kind of detail a 0.2 mm nozzle exists for. The loop is part of the print, sitting…
Ear to ear, the widest charm in the series — and the shortest. A chibi Stitch head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The face, the nose and those…
Bring cozy Pokémon vibes to your wall with this Snorlax-inspired light switch decoration! 😴 This decorative wall accent creates the illusion that Snorlax is peeking out from behind your light switch, making it a fun addition to any…
A blocky green menace creeping out from behind a pair of rounded bushes, tilting its head over the top of your light switch. The bush shapes hide the mounting edge and give the whole piece a solid, wide base, so it sits flatter against…
Most printable jack-o'-lanterns are solid lumps with the face scratched into the surface. This one is a shell: a 4.2 mm wall, an open underside, and eyes, nose and mouth cut all the way through into the cavity. Put a light under it and…
Ten spiral segments that twist against each other, printed as one piece. Squeeze and turn, and the whole pumpkin shears into a spiral. Ten identical wedges interlock around a common axis. Each one is free to rotate a little against its…
Eight page-clip bookmarks: Santa Stitch, Reindeer Stitch, Stitch with a Christmas Tree, Stitch in a Gift Box, Stitch with a Mug of Cocoa, Stitch with a Snowman, Santa Hat Angel and Christmas Scrump. They print flat, need no supports, and…
A round little ghost with its arms out, printed in one piece. No thin walls, no vase mode, nothing to glue. It is a solid figure that sits flat on a shelf, and at 60 % scale it fits in a closed hand — 60.0 × 54.3 × 54.7 mm, about 33 g of…
A sitting cat wearing a witch hat two sizes too big, printed as one piece. The ears poke through the brim, the hat tip flops over, and the whole thing sits flat without a stand. At 60 % scale it is 52.9 × 49.5 × 60.0 mm and about 24 g of…
A scowling flat-top monster with a stitched brow, fists up, printed in one piece. Heavy jaw, underbite, pointed ears, and a flat cranium with a row of stitches across it. At 60 % scale it is 60.0 × 53.4 × 57.0 mm and about 37 g of PLA.…
Tic-tac-toe with nine tiles that stay in the board. Turn a tile to claim a square. Nothing to lose down the back of a car seat. Every tile is captive in its own socket and turns in place: one face carries the motif, the other is plain.…
Five Halloween window bookmarks: a jack-o’-lantern, a black cat, a ghost, a witch and a skull. Each one is a little stained-glass lancet — black lead over white and orange glass — printed flat in one go, no supports and nothing to glue.…
All bark, carved in — the one that takes a wash best. A chibi Baby Groot head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The face and the whole crown of…
Eight page-clip bookmarks: Harry in a House Scarf, Hermione with a Present, Ron in His Christmas Jumper, Hedwig with a Christmas Letter, Golden Snitch Bauble, Hagrid Carrying a Christmas Tree, Dobby with a Present and Hogwarts Christmas…
Eight page-clip bookmarks: Santa Hat Creeper, Steve with a Present, Snow Golem, Reindeer Pig, Wolf in a Scarf, Elf Zombie, Blocky Christmas Tree and Chest Wrapped as a Present. They print flat, need no supports, and slide over the top of…
A set of six chibi Pokémon head keychains — each one a single solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. Faces, ears, spikes and cheeks are cut into the geometry rather…
A solid skull that prints unattended and lives on a desk all year. Sutures, temporal lines, orbits and a full lower row of teeth, cut into the geometry rather than suggested. At 60 % scale it is 50.5 × 60.0 × 56.9 mm and about 38 g of PLA…
Keep your essential gear together while walking your dog. This Flexi Leash Container with Pepper Spray Holder securely attaches to your Flexi retractable leash, giving you quick and convenient access to your pepper spray without taking up…
A caped sorcerer conjuring a glowing ring portal, standing on top of your light switch mid-spell. The portal disc is packed with concentric rune rings, which gives this design far more fine detail than a plain silhouette and makes it look…
Bring adorable Pokémon charm to your wall with this Jigglypuff-inspired light switch decoration! 🎵 This decorative wall accent creates the illusion that Jigglypuff is peeking out from behind your light switch. Features 🎵…
Make a splash with this Squirtle-inspired light switch decoration! 💧 This decorative wall accent creates the illusion that Squirtle is peeking out from behind your light switch. Features 💧 Squirtle-inspired design 💡 Fits around a standard…
The world's most famous moustached plumber standing on the switch, carrying an item in both arms and looking pleased with himself. Simple, iconic and immediately recognisable even as a bare outline. The cleanest, lightest print in the…
A sheltie you can actually recognise as a sheltie. A Shetland Sheepdog head keychain with the breed markings that matter: the long mane around the neck, the fine tapering muzzle and the tipped ears. The coat is cut as individual strands…
A Pikachu head you can print tonight and hang on your keys tomorrow. A chibi Pikachu head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The face, cheeks and…
A small werewolf with a mane, a ruff and a tail curled round behind it — and the lightest print in the set. At 60 % scale it is 38.2 × 60.0 × 48.8 mm and about 19 g of PLA, half the weight of the cauldron. If you are printing the whole…
The world's calmest animal, in a suit of armour. A chibi capybara standing in a full hero suit — blocky chest plate, armoured shoulders, tiny fists and the completely unbothered capybara face on top. It is the only full-body figure in…
Horns, spikes and a full set of teeth, at 36 mm. A chibi Bowser head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The brow, the snout, the teeth and the…
The lightest charm in the series — two grams of Eevee. A chibi Eevee head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The face, the big ears and the ruff are…
A fat cauldron with the brew bubbling over the rim — modelled, not implied. The potion is a dome of bubbles sitting proud of the pot, with a drip running down one side. One piece, flat bottom, no supports. At 60 % scale it is 60.0 × 60.0…
A skeleton pedalling a child's trike, printed as one solid piece. No assembly, no glue, no separate wheels — skull, ribcage, trike and all three wheels come off the plate as one part. At 60 % scale it is 31.4 × 37.1 × 60 mm and about 6 g…
A capybara riding a child's trike, printed as one solid piece. No assembly, no glue, no separate wheels. The whole thing — capybara, seat, handlebar, three wheels — comes off the plate as one part. At 60 % scale it is 41 × 51.7 × 60 mm…
F1 Speed Champions Display Stand with Interchangeable Race Track Tiles Showcase your F1 Speed Champions collection in style with this modern 3D-printable display stand. Designed for Formula 1 fans and collectors, this stand combines a…
A masked feline hero caught in mid-leap, claws forward, launching himself straight at the side of the switch plate. Because the figure mounts beside the frame rather than above it, the switch reads as the thing he is pouncing on - the…
A Squirtle head at keychain size, with a loop that actually prints open. A chibi Squirtle head keychain — one solid piece with the hanging loop modelled into the top, so there is nothing to glue and nothing to assemble. The face, the beak…
A golden snitch that hangs on the tree. A 59 mm ribbed sphere with a loop on top and two feathered wings that click into their sockets — five parts, no supports, two pins and a drop of glue. The sphere prints as two halves with a wall of…
Three skull-faced gears that come off the plate already turning. No assembly, no supports, no pins to push in. Turn the little skull and the whole train moves. It prints flat in one go, 129.6 × 62 mm and only 7.2 mm thick, about 15 g of…
A pumpkin keychain with four poppers you can push through and back. Prints in one piece, no supports, no assembly. Four captive plugs in a 2 × 2 grid: each one pushes through its socket, clicks past the lip that holds it, and pushes back…
A skull keychain with two poppers you can push through and back. Prints in one piece, no supports, no assembly. Each eye is a captive plug: it pushes through the socket, clicks past the lip that holds it, and pushes back from the other…
To wszystkie aktualnie dostępne wyniki.
