Wyniki wyszukiwania: 2kg

Sortowanie

307 modeli

P
PrintablesFAYRON

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Pobrania
752
Polubienia
43
Ocena
4,25
P
PrintablesMadaco

Wide spool holder for 2kg Filament

Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…

Pobrania
299
Polubienia
50
Ocena
5
P
Printablesalanspacer

Prusa Spool Holder - For both 1kg and 2kg

Summary: This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic. The 1kg version of this…

Pobrania
296
Polubienia
40
Ocena
5
P
PrintablesCab23

2kg spol holder Prusa CORE one

This is a spool holder designed for 2kg filament spools, created specifically for the Prusa Core One 3D printer. The design includes ball bearings for smoother filament unwinding and reduced resistance during printing. There are two…

Pobrania
230
Polubienia
42
Ocena
4,33
P
PrintablesTaurruth

Filament guide for 2kg spool holder MK 4

While using Prusa 2kg spool holder my filament got tangled around spool holder or the machine. That led to low quality prints and required me to constantly monitor printer and untangle filament.…

Pobrania
131
Polubienia
17
Ocena
5
P
PrintablesJean romain

Glissière pour Spools holder MMU3 2Kg

Glissières pour élargir le support de bobines d'origine du MMU3 et poser une bobine de 2kg/1Kg/500g ect...

Pobrania
43
Polubienia
3
Ocena
5
P
Printablesmcfly2893

Prusa MK4 2kg Spool Mount

This simple spool mount provides stability for the 2kg Prusa spool.

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesSoCalNorseGod

Filament Quick Clamp for 2KG Spool

I scaled “ishikawats” XL Filament Quick Clamp with clip so that it can be used with 2KG spool's. “ishikawats” has XS, M, L, and XL available Description from “ishikawats” design, I used the same: Mechanism is fully print-in-place. Add…

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesPrusa Research

2kg spool holder for Original Prusa MK3S+

Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…

Pobrania
8727
Polubienia
630
Ocena
4,88
P
PrintablesPrusa Research

2kg Spool holder for Original Prusa MK4

Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.

Pobrania
4778
Polubienia
617
Ocena
4,64
P
PrintablesHugo

Spool Holder - 2kg, 1kg, 250g

You will need bearings. for 2kg three 608 for 1kg two 608 for 250g two 696 Among the STL files are auxiliary bearings - before you get the necessary pieces :-)

Pobrania
3446
Polubienia
1019
Ocena
4,75
P
PrintablesDom Cis

Spool holder - 2Kg

Spool holder attached to the frame.

Pobrania
1821
Polubienia
105
Ocena
4,66
P
PrintablesVydareny

2KG spool holder

This 2kg spool holder consists of two parts. The adapter screwed directly on the original spool holder can support your very initial projects, but long term its not enough. The holder is there to support the adapter, enahnced by a little…

Pobrania
1528
Polubienia
141
Ocena
4,86
P
Printablesgeco0on

2kg Spool Holder for Prusa Core One+ / interchangeable

All I did is take what Prusa provided on Printables, and made it longer, that's all. I've found that I lacked places to hold 2kg spools while working. Now I don't. If someone else find this useful, happy printing! Don't throw short…

Pobrania
977
Polubienia
119
Ocena
5
P
PrintablesChris Hill

Spool holder (1kg or 2kg) for Original Prusa Enclosure - Configurable

This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…

Pobrania
920
Polubienia
208
Ocena
4,95
P
PrintablesJoão Severino

Prusa CORE One+ 2kg Spoolholder

Prusa CORE One+ and CORE One L 2kg Spool Holder This spool holder is a remix of the official Prusa CORE One to CORE One+ upgrade, adapted to support heavier 2kg filament spools. It uses the standard spool holder puck system, ensuring…

Pobrania
774
Polubienia
80
Ocena
5
P
Printables3D_CNC

Adjustable Spool Holder .5kg - 2kg spools (fixed screw)

Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…

Pobrania
768
Polubienia
144
Ocena
4,97
P
PrintablesMarekS

Core One 2kg spool holder

2kg Spool Holder for Core One I would recommend printing it with PETG and using at least 4 perimeters to ensure it is sturdy enough. It should be assembled with 4xM3 screws. The model was designed according to:…

Pobrania
636
Polubienia
77
Ocena
5

2kg Spoolholder Drybox

I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…

Pobrania
632
Polubienia
485
Ocena
5
P
PrintablesJobOx

Adapter 2kg Spool Holder (MK3/MK4)

With this adapter you will be able using your default Prusa spool holder for 2kg spools (of 30cm diameter). Simple click system. No tools needed. Can be printed with PLA without support. Brim recommended. Please pay attention to the…

Pobrania
627
Polubienia
61
Ocena
5
P
PrintablesFormFutura B.V.

ReFill - 2kg Master Spool - Flange

This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…

Pobrania
557
Polubienia
33
Ocena
4
P
PrintablesAba

2kg spool holder for prusa printers

a 2kg spool holder, i have many 2kg/2.3kg/2.5kg spools from different manufacturers and all fit properly. Print instructions i personally printed this with 5 parameters and seems way too rigid, i think less parameters will work fine too.

Pobrania
541
Polubienia
13
Ocena
3,75
P
PrintablesZiP

2kg Spool Holder

J'avais besoins d'un support pour ma bobine de deux kg, mais ce que je trouvais en ligne ne me satisfaisait pas. J'ai donc créer celui ci et j'espère qu'il vous plaira. Vous aurez besoins de 2 impression de chaque et une seule de “tube”…

Pobrania
537
Polubienia
53
Ocena
4
P
PrintablesBrolin Workshop

2KG Spool Holder For Original Prusa Enclosure

2KG spoolholder, remixed from the original 1KG spool holder. It is required to remove one plastic rivet from the frame for one more screw that willl give extra support for the spool holder. Mine is printed with 6 walls, 25% infill, 0.6mm…

Pobrania
526
Polubienia
53
Ocena
5
P
PrintablesKRKnet

Prusament 2kg Spool Holder

Easy to print and simple spool holder for 2kg spools with hexagon pattern. The walls are compatible with the Honeycomb Storage System and can be used to fix multiple units together or just store tools like snippers. You need to print 1x…

Pobrania
501
Polubienia
75
Ocena
4,77
P
PrintablesMartinL

2kg Spool holder extension

Extension of standard holder for recycled 2Kg spool.

Pobrania
500
Polubienia
34
Ocena
4,3
P
PrintablesJetro

Core One 2kg Spool Holder

2kg Spool Holder for Core One, modified from the original 1kg spool holder.

Pobrania
496
Polubienia
52
Ocena
4,83
P
Printablesdeluc

Filament guide for 2kg Spool holder for Original Prusa MK4

I made this addon for the 2kg spool holder because the filament always jumped off the spool when the print head was too high. It uses 2 M3 nuts, 1 M3x30 screw and 1 M3x10 screw. I also used the short bowden tube from the original filament…

Pobrania
492
Polubienia
54
Ocena
4,83
P
PrintablesPetr Vacek

Spool Holder 2kg Extension - v2

Using 2kg spools for printing require a spool holder extension. I got inspired by a model of MartinL and his simple extensor. But his model just doesn't fit, because it has just a blank hole without clips/pins. So I modelled my own…

Pobrania
487
Polubienia
53
Ocena
4,57
P
PrintablesDeus_Sen

Big clip (closure aid for 12kg dog food bag) - Remix

A large clip by JeyMco for bags like dry pet food. I added treads to the sides for better grip. Ein großer Clip für Säcke wie z.B. Trockenfutter für Haustiere. Für besseren Halt habe ich Profil an den Seiten hinzugefügt.

Pobrania
477
Polubienia
56
Ocena
5
P
Printablesvnb

Core One + 2kg Genuine-like Spool Holder with a Twist

Originally saw Nomad's Galaxy variation, but was not happy that it does not look like original Core One spool holder. Additional hardware: For Core One + O-ring from the original holder (25x3.5 mm) - you can even print a new one,. For…

Pobrania
473
Polubienia
64
Ocena
4,64
P
Printablesritzy

2KG Filament holder extension V2 for Prusa Enclosure

I had issues with the original design in the Original Prusa enclosure. It wasn't wide enough, so the spool wouldn't spin properly and would bind. I also had the ABS split when I put on the original stick, so made that a bit larger on this…

Pobrania
448
Polubienia
27
Ocena
5
P
PrintablesYves Könecke

Simply Filament Spool Holder dual 3Kg 2Kg 1Kg Anycubic Kobra 2 Max

PLA+ Layer 0.2 infill 20% Wall 5 no Support Short Version: 125g ca 4h Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu

Pobrania
430
Polubienia
47
Ocena
0
P
PrintablesImam

Ultimate Snapmaker U1 Filament Enclosure, Cover and Case (~1.2kg) - Updated Version V2

Update 01/10/26 Increased cutout for the bases by 1 mm. Update 04/09/26 Added 3mf print file Adjusted left and right base sensor cutouts. Update 30/08/26 - New revision added, the following has been added. Desiccant storage system has…

Pobrania
424
Polubienia
95
Ocena
4,33
P
PrintablesPatrick_VS

Prusa Enclosure Spool Holder Rod / Arm 2KG 125mm

Prusa Enclosure Spool Holder Rod / Arm 2KG 125mm for big recycled spools

Pobrania
419
Polubienia
30
Ocena
4,33
P
PrintablesDoomedVitek

core one spool holder static 2kg

Remix of original Prusa Core One L spoolholder for 2kg spool.

Pobrania
414
Polubienia
45
Ocena
4,88
P
PrintablesMakePro

Prusa CoreOne+, CoreOneL 2kg spool holder and TPU O-ring

This is an extended version of the original Prusa CoreOne+/CoreOne L spool holder. The stock holder fits only standard 1 kg spools, so I redesigned it to support wider filament spools used by many manufacturers. The model also includes a…

Pobrania
395
Polubienia
44
Ocena
5
P
PrintablesNomads Galaxy

CORE One 2kg Twist Adjustable Spool Holder

Similar to the HT90 Spool Holder, this spool holder twists to extend or shrink to adapt to different spools. Very Simple little replacement base to mount the Twisting Spool holder to the CORE One. Original File (And spot to get the spool…

Pobrania
370
Polubienia
70
Ocena
5
P
PrintablesLordTalon34

spool holder for filament 1Kg and 2Kg

The "axe" part is the same for the 2 supports V1 and V2. La pièce "axe" est la même pour les 2 supports V1 et V2.

Pobrania
353
Polubienia
36
Ocena
5
P
PrintablesKnur

Front 2kg Spool Holder for Prusa MK3S+

This spool holder is a 90 degree rotated version of the Original Prusa MK3S+ Prusament 2 kg spool holder redesigned from scratch, based on the original holder dimensions. I cannot guarantee that this will not break or do some damage to…

Pobrania
346
Polubienia
29
Ocena
5
P
PrintablesDavid Šec

Creality Ender 3 & CR-6 Max Large 2Kg Filament spool holder

If you've just bought a 2kg spool of filament and immediately realized that it won't fit into a standard holder, you don't have to use a broom handle to hold your spool during printing. Just download this extended holder that will fit…

Pobrania
342
Polubienia
23
Ocena
4
P
PrintablesIangenuity

2kg Spool Holder Extender for Prusa Enclosure

This model extends the injection molded part that comes with the Prusa Mk3 family of printers so that it can hold 2kg spools and remain compatible with the Prusa Enclosure. Printing Orientation I recommend printing this vertically (as…

Pobrania
340
Polubienia
45
Ocena
3,82
P
PrintablesLeSnowTiger

Spool holder with bearings for Prusament 2KG

Prusament 2KG Spool did not fit on the original design. So i made the left frame and screw about 3cm bigger. Remix of: https://www.printables.com/model/62910-use-m3-screws-spool-holder-for-prusa-mini-flexible If you need the spoolholder…

Pobrania
330
Polubienia
72
Ocena
4,78
P
PrintablesPrintess

Spool holder 2Kg for Mk4

An adapter and holder to be able to mount 2kg spools of filament onto a Prusa Mk4 sample holder. I printed both pieces in PLA and it seems to be working fine. But probably PETG or ASA would be better longterm. I printed the adapter with…

Pobrania
327
Polubienia
36
Ocena
4,78
P
PrintablesRetro Frog

Bambu Lab Side Mount Spool Holder with 1 and 2kg spool variants

One of the biggest pet peeves of mine with all of the enclosed Bambu printers is there rear mounted spool holder. It's hard to get it and pretty much means you can't place the print flat against a rear wall. So I designed my own side…

Pobrania
313
Polubienia
23
Ocena
5
P
Printablesdancan13f

Prusa MK4/MK4S 2kg Spool Holder Extension

I took Bastiif's idea ( https://www.printables.com/fr/model/295403-2kg-spool-adaptor ). This version is easier to print horizontally. I recommend printing it in PETG with a layer of 0.2mm and an infill rate of 50%. Print Settings Printer:…

Pobrania
293
Polubienia
30
Ocena
5
P
PrintablesYves Könecke

ACE PRO Simply Filament Spool Holder 3Kg 2Kg 1Kg Anycubic Kobra 3 Max

PLA+ Layer 0.2 infill 20% Wall 5 no Support Endstop super glue it (optional)!! at your own risk :P gift coffee money Bitcoin: bc1qx7lu8wjtka03pcagmqr8ky6nr5wt78u0x5qccu

Pobrania
251
Polubienia
41
Ocena
5
P
PrintablesPaul Baird

Dog Food Can Lid (1.2kg or 100mm diameter)

Avoid brittle PLA's for this, it needs some flex. Snaps on perfectly with this PLA+. Will be uploading another model without the splits for TPU/TPE for a water-tight fit. Print settings (Cura): Walls x 3 Top/Bottom x 6 .2mm layer height…

Pobrania
249
Polubienia
19
Ocena
5
P
PrintablesPablo_3D12

support bobine 2kg/1kg

superbe support bobine

Pobrania
248
Polubienia
15
Ocena
0
P
PrintablesBelFomDesign

Enclosure large 2kg spool holder - complete

Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…

Pobrania
248
Polubienia
19
Ocena
4,43

2kg MK4 spool holder stabilizer

A stabilizing leg for the 2kg MK4 spool holder.

Pobrania
236
Polubienia
33
Ocena
4,91
P
PrintablesSander de Jong

Prusament 1kg/2kg spool holder

This is an adjustable spool holder, which can assembled in various widths. Simple insert the arms in different parts of the slider to adjust the width, and use the removable rings (which can be fixed with a rubber band) to prevent the bar…

Pobrania
232
Polubienia
22
Ocena
0
P
PrintablesBastiiF

2kg Spool Adaptor

A little Adapter that can simply be pushed on the standard spoolholder on the Original Prusa i3 MK3S+ 3D printer. With the Adaptor you can now hold 2kg spools and still can fit a small/1kg spool on the holder without removing the adaptor.…

Pobrania
229
Polubienia
21
Ocena
4,8
P
PrintablesJames Bufkin

Donor Spool Holder Frame for 2kg+ Spools

This is a remix/augmentation to the fine respooler designed by Miklos Keszely. This allows you to take filament from 2kg to 6kg large spools and put them on 1kg standard spools for use in a dryer box or whatever suits you. Print the frame…

Pobrania
229
Polubienia
28
Ocena
5
P
PrintablesSeven

Dual Filament Spool Holder 2KG for 2020 Extrusion

Dual filament spool holder that can hold 2kg spools. Designed to fit onto 2020 Extrusion such as the Ender 3. This holder pushes the filament spools back to allow room for tall hotends to reach their full Z travel. Screw holes are sized…

Pobrania
224
Polubienia
19
Ocena
4,5
P
PrintablesXtra

2KG 300mm Spool Holder

Holder to keep 300mm diameter, 103mm wide spools with 2Kg filament on track. Fit PC4-M10 PTFE coupler 2x Ball Bearing 608 z needed Print instructions Made of PLA 0,3 draft, 20% infill, no support needed.

Pobrania
222
Polubienia
24
Ocena
4
P
Printables2Many3Dprnters

Sovol SV08 Max 2kg or 3Kg Spool Holder Extension

The original spool holder for the SV08 max is sized for a 1kg spool. That is dumb as this monster needs ample filament for long prints. This extension adds 50mm to the spool holder to accommodate 2kg and 3kg spools. This does seem to be…

Pobrania
217
Polubienia
16
Ocena
4,75
P
PrintablesNomads Galaxy

CORE One+ 2kg Twist Adjustable Spool Holder

Inspired by the HT90 and Karkovski's spool holder, this is a simple remix that attaches it to the Core One + Mount. This requires the O-Ring normally required by the Core One+ upgrade. Also requires the new Core One+ spool holder mount…

Pobrania
212
Polubienia
46
Ocena
5
P
Printablesstickhog

Silica Gel Spool Container for 2kg Prusament Spools

Update May 25, 2022 - Added a 3MF file after using the “simplify model” in PrusaSlicer to reduce the triangles in the mesh. Now only a 2MB file for both the container and the lid. Silica gel spool container resized to 120mm to fit in 2kg…

Pobrania
184
Polubienia
30
Ocena
5
P
PrintablesPrusa Guy

low angle 2kg spool holder

spool holder form Original Prusa MK3 with filament guide. this one have low angle to fit printer in lower shelves.

Pobrania
181
Polubienia
47
Ocena
4,55
P
PrintablesRobert E

Filament Guide for Prusament SpoolHolder 2Kg (v2)

Filament guide that fits to Prusa and @panak97_765577 "Original Prusa MK4 Prusament 2 kg spool holder" Version 2 have fittings for 10mm diameter PTFE inserts. Spool holder from @panak97_765577 can be found here And the original Prusa…

Pobrania
179
Polubienia
21
Ocena
4,71
P
PrintablesStarec

2kg Spool Holder

Spool holder for 2kg spool. Wall mount

Pobrania
177
Polubienia
19
Ocena
5
P
PrintablesRyan Roehnelt

Spool holder for 1kg and 2kg Prusament filament rolls

The original Prusa version had a lot of bounce and eventually broke. I made some measurements of the broken part, drew it up, made it stronger. The second version ( v2 ) is a mirrored version of the original with a trimmed bottom tab…

Pobrania
173
Polubienia
9
Ocena
5
P
PrintablesPavel Pelčák

Modified spool holder for 2kg

I slightly modified model of 2kg spool holder to be able to put it on the upper shelf over the printer.

Pobrania
172
Polubienia
8
Ocena
5
P
PrintablesZohan#4775

MK4 2 kg / 1 kg Filament spool holder modular for original suitable for a lot of Spool sizes, 3 x 1kg or 2kg + 1kg no Problem

*** 28.02.2024 UPDATE *** Long Filament Guide V2.1 *** 26.02.2024 Publication on Printables *** Recommendation PETG or better. You will need an M 3 x 10 mm screw with nut to fix the filament guide to the main holder. With 1 extension you…

Pobrania
168
Polubienia
28
Ocena
5
P
Printablesbbrendon

Spool Holder - any size (5kg, 2kg, 1kg, etc)

This is a simple yet robust filament spool holder designed to accommodate spools of any size, from 1kg to 5kg and maybe more. Its simple design is easy to assemble and requires minimal parts as well as not taking up lots of space when not…

Pobrania
164
Polubienia
20
Ocena
5
P
Printablesftobler

2kg spool holder for prusa

I needed a larger diameter version of the Prusa spool holder for 2kg spools. It now accepts spools with 30cm diameter & 10cm width. The Original STEP file included in the MK4 version is in bad shape overall, so to do my changes I needed…

Pobrania
160
Polubienia
14
Ocena
4,75
P
PrintablesBill Rogan

2kg spool holder for Prusa enclosure v2

I wanted a spool holder for either a 2kg spool or 2 x 1kg spools to put on top of my DIY Prusa enclosure. I remixed the single spool holder, which was itself a remix of the 5x spool holders. It can hold: one 2kg spool two 1kg spools three…

Pobrania
143
Polubienia
14
Ocena
5
P
Printablescperuffo3

2.2KG Spool Holder for Filament Rewinder

A Spool Holder Remix to support ColorFabb 2.2kg Spools

Pobrania
134
Polubienia
12
Ocena
4,33
P
PrintablesJrichTX

Ender 3 / Ender 5 POM Bearing Spool Holder for 1kg and 2kg spools

This design takes aspects of @Tony 's Longer Original Ender 3 / Ender 5 Spool Holder + Nut , and crandell2's Ender 3 POM V roller Spool Holder on Thingiverse. I love to re-use parts where I can, and POM wheels (or their bearings) are no…

Pobrania
134
Polubienia
15
Ocena
4
P
Printablesgeorgag

Prusa i3 Series Spool Holder (2kg and 3kg spool compatible)

This is a remix of another PRUSA spool holder (see link below). This variation adds an additional screw at the bottom of the bracket to prevent the parts from splitting apart after they are screwed together. This spool holder is…

Pobrania
132
Polubienia
32
Ocena
4,8
P
PrintablesPealPrint

2KG Filament Spool Holder Mark II

Print Settings: These setting apply to the solid, tested, parts, not the flexible feet. Printer: Tested with Prusa MK2S+ Filament: PETG or PLA Tested with PETG. Layer Hight: 0.3 Infill: 20% Grid Exterior Perimeters: 4 Brim: No Heated Bed:…

Pobrania
130
Polubienia
12
Ocena
5
P
PrintablesRadim Bažant

Filament holder 2KG / 4KG on the wall - Držák filamentu 2KG / 4KG na zeď

Filament holder 2KG / 4KG on the wall You will need to buy a 24mm round wooden stick and some glue. Držák filamentu 2KG / 4KG na zeď Budete si muset koupit dřevěnou kulatou tyčku o průměru 24mm a nějaké lepidlo.

Pobrania
127
Polubienia
15
Ocena
0
P
Printablesd.kaltenberger

Gravity Spoolholder 2kg Version

Remix from the Gravity Spoolholder, for 2kg Prusa Spools

Pobrania
126
Polubienia
19
Ocena
5
P
PrintablesTuca D

Spool Holder for Ultimaker 3 S5 S7 - 2.2Kg Spool

Spool holder for UliMaker 3, S5 and S7. Supports one 750g spool plus one 2.2Kg Spool. Fits perfectly on the printer with the original NFC sensor and bottom part. Prints in two parts, with 4 alignment pins.

Pobrania
126
Polubienia
2
Ocena
0
P
PrintablesEli Doz

elegoo neptune 4 max 3kg/2kg spool holder strong

this threads in to the stock locations, it is a remix of @TheDibbler_613760's design i just made is way more dense.

Pobrania
124
Polubienia
6
Ocena
5
P
PrintablesTeilsatko

2kg filament spool holder

a 14.5 cm spool rail original: https://www.printables.com/model/57214-mini-printable-parts you can find the other part under: files > Mini Spool Holder

Pobrania
123
Polubienia
16
Ocena
5
P
PrintablesFlashL

Prusa MMU3 enclosure 2kg spool holder

I have extended the lengths of the spool holder and the filament guide so it accommodates a 125 mm wide spool.

Pobrania
120
Polubienia
18
Ocena
5
P
PrintablesParsupo

2kg spool/filament holder extension (without supports)

This is a (remix) 2kg spool/filament holder extension, which can be printed without using supports. It fits on the original prusa i3 (mk3/mk4) spool holder. It can also be used in the official prusa enclosure.

Pobrania
120
Polubienia
14
Ocena
5
P
PrintablesIdea2Item

1Kg+ 2Kg spool holder for Original Prusa enclosure

I remixed spool holder perfectly sized to accept both 1Kg Prusament filament spools and 2KG Pusament filament spools. Other spools may fit, but it requires you to measure :-P The large spool size accepts 125mm maximum spool with and the…

Pobrania
113
Polubienia
12
Ocena
5
P
PrintablesDennisKlein

Spool Holder Ender3 S1 2kg

2KG spool holder for Ender 3 S1. Fits into the original holder

Pobrania
112
Polubienia
10
Ocena
0
P
PrintablesHema

Big Spoolholder 0-2kg

For 2kg or lighter filamentspool. Infill: Honeycomb 15% Filament PLA Layer: 0,3mm To put it together You need: 2xM4 nuts 2xM4x12mm screws

Pobrania
111
Polubienia
17
Ocena
4,67
P
PrintablesJan Tuts

2kg Spool Holder (spools up to 136mm wide) version of "tommyvn's New-Spool Dry Box"

TL;DR: Parts and Assembly This is a slightly wider version of tommyvn's New-Spool Dry Box spool holder, able to hold spools up to 136mm wide, including the new 2kg Prusament spools. You'll need: 1x print the included model 4x 608 ball…

Pobrania
111
Polubienia
10
Ocena
0
P
PrintablesZenmaster33

2kg Filament Spool Holder for IKEA SKADIS

I remixed alecs.form 's Filament Spool Holder for IKEA SKADIS ( https://www.printables.com/model/116706-filament-spool-holder-for-ikea-skadis ) to use a 2kg Spool of the recycled Prusament (or 2 normal Spools). I changed the Design to use…

Pobrania
110
Polubienia
12
Ocena
5
P
PrintablesLazerBlade

K1 2KG Spool Holder

Swap out your old holder for this thing. Works for both 1kg and 2kg spools. If you liked it please give it a like and heart if you want.

Pobrania
109
Polubienia
7
Ocena
0
P
PrintablesAki Racing

2kg+ Filament Spool Holder

Rather simple 2 piece Spool holder for 2kg+ Spools. Slides into each other and is therefore a variable length. Designed it as I wanted a holder to put in a box without drilling holes into the box Print time just below 2 hours each…

Pobrania
106
Polubienia
7
Ocena
0
P
PrintablesHanzik

Spool Holder for Large 2kg Spools - Prusa MK4 compatible

Longer version of spool holder that did not fit larger 2kg spools that are not as wide but rather large in diameter.

Pobrania
106
Polubienia
7
Ocena
0
P
PrintablesAshyr

Prusament 2KG Spool Dry Box, Drybox mounted to Prusa XL / 3030 Frame Using Filler Brace (Updated for all positions)

I wanted to be able to use Prusament 2KG spools in an enclosed dry box mounted on the Prusa XL 3030 frame. I remixed my Universal Rewind Spool Dry Box, Drybox mounted to Prusa XL / 3030 Frame Using Filler Brace to work with MattB’s Wider…

Pobrania
106
Polubienia
37
Ocena
5
P
PrintablesPolypaul

Prusa MINI+ spool holder 2kg extension rails

Extension rails for the MINI+ spool holder to fit 2kg Prusament spools

Pobrania
103
Polubienia
9
Ocena
0
P
PrintablesBartosz Łata

2kg filament spool holder

Project Description: 2kg Filament Spool Holder This project is a practical filament spool holder designed to support spools weighing up to 2 kg. The structure is sturdy, easy to assemble, and ensures smooth filament unwinding during…

Pobrania
99
Polubienia
10
Ocena
0
P
PrintablesJeyMco

Big clip (closure aid for 12kg dog food bag)

Large clip that works for 12kg dog bags. I use 2 for mine :) Slides on easily enough, while still keeping the bag together (I usually fold/roll the bag top first, then place the clips. Printed with 0.6mm nozzle at 0.35mm layer height with…

Pobrania
99
Polubienia
12
Ocena
0

2kg Filament holder

This adds 60 mm of length to hold the 2kg rolls. It holds amazingly and spins smoothly!

Pobrania
95
Polubienia
19
Ocena
5
P
Printablesgwi

2kg wall mount spool holder

This wall mount spool holder prints in less than 1h and is actually stronger than many other designs. I have tested it to hold 10kg at the tip without any sign of weakness, so don´t be afraid by it´s light design ! It's not designed to…

Pobrania
93
Polubienia
12
Ocena
5
P

2Kg spoolholder for Prusa enclosure

2Kg spoolholder for Prusa enclosure We use original sides with rollers from Mini spool holder, but we use different piece to join them as a stand that is also mounting to Prusa enclosure. Why: I was looking for different ways ho to store…

Pobrania
92
Polubienia
19
Ocena
5
P
PrintablesPFITS

Drybox for 2kg filament and Prusa MK3S+ Topmount

The Drybox is a remix and recreation of above models. It is build to fit directly on top of the Prusa MK3S+ Printer and has a shaft to hold the spool, so no need for any bearings and other tubes. To attach everything you will need this:…

Pobrania
91
Polubienia
15
Ocena
0
P
PrintablesMandicReally

Core ONE 2kg Spool Holder with a Twist

Core One 2kg Twist Spool Holder – Remix This is a remix combining two existing designs to create a more robust and user-friendly 2kg spool holder solution for the Prusa Core One . The mounting concept is based on TheNomad’s Core One…

Pobrania
88
Polubienia
44
Ocena
0
P
PrintablesDarknight

2KG spool holder for Bambu lab P1P

2KG spool holder for Bambu lab P1P, it doubles as a side mount if you only use 1KG spools. This will mount on the LH side of the display. I used the existing screws from the metal spool holder and installed them in the upper holes.…

Pobrania
88
Polubienia
6
Ocena
0
P
Printablesjjo5555

Large spool arm and support to hold wide spools (2kg) - for Prusa Mk4

Specifically for the Prusa Mk4 to hold wide spools like the 2kg spools. The support arm sits on the wider part of the metal frame and fits snuggly into spool arm end disk. you will need infill just at the very top of the model to get good…

Pobrania
87
Polubienia
7
Ocena
2
P
PrintablesDjngnear

Mk3s Dual Arm 2kg Spool Holder

Remixed the original to support a 2kg spool of Prusament. You still need 2 608 bearings.

Pobrania
86
Polubienia
11
Ocena
5
P
Printablessmiledemons

Prusa MK4 / MK3 Lengthened Spool Holder Endpart for 2kg spools

Bought the 2kg Prusament spool and didn't like the Prusa 2kg spool holder as I also want to use the filament guide and hold a 1kg spool in parallel. So, I took BrunoLeScribe's model and lengthed it to fit the 2kg spool. Print instructions…

Pobrania
86
Polubienia
3
Ocena
5