4938 modeli
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
The SSUPD Meshlicious fan mount is inspired from chaosmage project. I have optimized the holder to be more stable and is not blocking any airflow. With this fan mount you could improve the VRM and mainboard cooling. Fits perfectly for…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
This is a Desert themed house you can print for tabletop wargames such as Star Wars: Legion, 40k, etc. It prints all at once with no supports needed. If you are interested in other terrain files, check us out at imperialterrain.com Print…
Wydruk około 8,22 €–10,04 € nettoWstępna wycena jednego wariantu
A 12mm CW to 14 CCW threaded adapter for fitting a tracer unit or mock suppressor on an airsoft gun.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: Version 2 uploaded. Grab files with _v2. Latches in joint were made little stronger. Arc for radius 6 (inner on ruler) made larger angle, to made it more accessible. ----- Printing tips: Print with 2 colors for better reading.…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a very simple 2GT belt clip and couldn't find anything that didn't require additional hardware for an open belt so I came up with this simple design. It features two individual parts that join together to lock the end of…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to be a sturdy tray to hold any 32mm round base models. 4 finger holes in the middle to help pick up the tray and to lessen total weight.
Wydruk około 3,70 €–4,52 € nettoWstępna wycena jednego wariantu
Original file had to much play in the 12mm tire and around the 8mm axel. The updated file fits perfectly snug on the model 7 buggy. Printed with PLA .15mm with a brim.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Hi there! This is my own take on a 3-model squad base for 32mm diameter base miniatures. I use these for my older style Blood Angels space marines for Warhammer 40k, but these would work for just about any game using minis on the same…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Simple to use, printable tool to help install 22mm Schneider XB5 Harmony Front Elements. Loose fit over the nut and screwdriver like feel. Comfortable to use.
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
The GMKtec M5 Pro (and Plus ) comes with a small 40mm fan on top - it's quite noisy. This top/case allows you to add a 92mm fan instead. You can either have the fan on top, or extend the case and keep the fan inside. I intend to use it…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
During winter fun in the snow, shoes often get wet. That's why I designed and built a 3D printer dryer for two pair of shoes with 12VDC fan 92x92mm and flexible corrugated hose diameter 32mm. Can be used in a car or caravan with 12VDC…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Die Lochschablone hat einen Abstand von 32 mm und einen Bohrungsdurchmesser von 5 mm . Zusätzlich werden 4 Kugellager 625 benötigt. This Shelf Pin Jig has a spacing of 32 mm and a bore diameter of 5 mm. Additionally, 4 ball bearings 625…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Complete Functional Beadlock RIM design for 1/10 RC Crawler All the details about the project can be find from the following blog post : https://innovativegeek.com/how-to-design-a-3d-printable-rc-car-wheel-using-fusion-360/ Hardware you…
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
Hallo ich wollte mein Meanwell Netzteil leiser haben aber trotzdem die Kühlleistung nicht verlieren. Da wollte ich gleich meinen Noctua NF-R8 benutzen so entschied ich mich für meinen Zaribo dieses Abdeeckung von…
Wydruk około 3,35 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have a couple of small accessories for an old Dyson DC07 in the house, and wanted to start using the short Dyson brush nozzle (pictured) on my Shark cleaner because its bristles are stiffer and more durable - the Shark brush is too soft…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed Prusa Enclosure parts for 2mm plexiglass It's hard to find 3mm plexi near where I live, so I remixed necessary parts for 2mm plexiglass (which is way cheaper too) Fitment is quite tight, my caliber measured 1.94mm. This might also…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
My personal journey for a first bigger project. I wanted to build my own enclosure with cheaper materials fitting my printer setup and table. I made this to use the cheapest (2mm) plexiglass from the DIY shop and cut mine to be 4 sheets…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Thimbles are very handy when making end splices. Yet for some reason I always have the wrong size for the type of rope I'm using….. That's why I made a CAD model. I made 4 standard sizes and included a STEP file so you can make your own!…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bonsai pot 33 rectangular curved inward 162x122x42mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed with PET-G. I used 4 perimeter and 25% of gyroid infill. works fine, but no warranty in case of accidents!
Wydruk około 2,43 €–2,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This old Macintosh ('80) has been designed to hold and charge the 42mm Apple Watch. I modified this model to make the front frame more resistant. Therefore, I added 2mm thickness to both side walls. The original model has been designed by…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
ENGLISH: These disks are used for triple guying of a Spiderbeam antenna mast. The dimensions are for the 12m HD model. They are designed to be threaded on from the top and then sit on the next largest mast element so that it does not go…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for ratchet wrench(gola, 1/4", 153mm of length) and set of sockets (5-12mm) Mounted to HSW with 3 M3 inserts with nuts and M3x10 screws. For the top most M3 screw I used low profile half round head. For the other two, the shape of…
Wydruk około 6,31 €–7,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D printed model offers a simple yet sturdy solution for securing your Blink Mini camera to the AC Infinity 22mm tent poles Print Settings Printer brand: Creality Printer:Ender 3 Rafts: No Supports: No Resolution: Standard Quality…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part). This redesign features a uniform 2mm…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ring zum aufstecken für leichtgängiges abrollen und um Staub beim abrollen zu verhindern. Perfekter Sitz auf eSun PLA Matte *** Ring for climbing for easy -to -smooth rolling and preventing dust when rolling off. Perfect seat on Esun Pla…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Single Keystone modul for installation in furniture or similar with 32mm hole diameter
Wydruk około 16,12 €–19,71 € nettoWstępna wycena jednego wariantu
Filamentive introduced a new spool core. This is significantly smaller than the original refill spool. Printed in PETG at 0.2mm layer height.
Wydruk około 3,96 €–4,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dyspenser do zaklejek na przestrzeliny z dodanymi napisami i oznaczeniami strzelnicy Braterstwo W23.
Wydruk około 1,00 €–1,23 € nettoWstępna wycena jednego wariantu
A simple magnetic fidget using 6 cylindrical magnets of 6x2mm. Put them 5 in the same orientation in the base and 1 in the opposite orientation in the slider (so that it’s attracted by the 5 others). Add some candle wax before closing the…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Hooks for 2mm diameter wire mesh. The pen has a diameter of 4mm, and the end ball has a diameter of 6mm. No Supports needed. Happy printing.
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
I've been working on this for a while now. This is version 4. I did a test print of version 3 (the files you see) and just needed to add one small thing to it to get the connection between the halves ready, so I did that, and I'll do…
Wydruk około 4,86 €–5,94 € nettoWstępna wycena jednego wariantu
About This is a blind plug to close unused ø22mm button/indicator mounting holes in control panels and other industrial operating stations. The blind plug is designed for a panel thickness of up to 5mm. This blind plug is not watertight…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
mit PLA gedruckt Druckeinstellungen Füllung 15% Schichthöhe 0,2mm Stützen nur Box-Teil4.stl
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
A simple model that makes 52mm hemispherical cups with a boss to attach to a rod.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
Der Adapter von 42 mm (Schlauchseite) auf 1 ¼ Zoll (Zusatzteile z.B. Fugendüse) diese ist bei Dewalt-Deutschland nicht verfügbar.
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Naviják pro 2mm lano MASTRANT se skládá z více dílů které se sestaví a vytvoří plně funkční navíják. Stačí prostrčit navíjákem stanový kolík a uchopit kličku a můžeme navíjet. V těle navíjáku je drážka pro bezpečné uchycení provázku.
Wydruk około 6,25 €–7,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had to create this part since I broke the original one while testing the indo scooter. Print with PETG Use 50% infill to be resistent Use Gyroid as the infill pattern
Wydruk około 1,42 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While the ICY DOCK MB852M2PO-B can be mounted with the standard hardware in a Supermicro server, it will have a lot of room to move, this adapter fixes that issue by not using the mounting points on the drive but raising it and mounting…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It's just a simple 92mm Fan Grill Print with 0 top/bottom layers, 15% hexagon infill
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Simply slide in a 10x2mm neodymium magnet in the pocket (no glue needed) and glue other 10x2mm magnet to the surface of door etc. I use mine to keep door closed against foam for extra sound proofing my printer in diy enclosure made of…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Annular gauges for measuring the diameter of cylindrical objects. Gauges are 32mm tall and 4mm thick. 10mm to 19.96mm. These are part of a set. For similar ring gauges in different sizes, use this search .
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Tag for a 222mL aluminum to indicate what is growing inside it.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
A cover for 222mL aluminum can avocado seed holder.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
flat chess figures - height 5 to 7 cm with a magnetic cell inside (2mm * Ø10mm)
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 3,01 €–3,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A nice mount für your bike horn for 22,2mm handlebars. Just use a M3 screw and nut to attach it to the handlebar and 2 zip ties to attach the horn. Best printed with PETG - some flexibbility is needed to be able to attach it to the…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Om dat er in de handel geen verloop bestaat van groot naar 14.2mm heb ik het zelf geprint. Ik had wel een rubberen verloop van 50 naar 30 maar dat was nog niet genoeg. Ik had het hele verloop kunnen printen van 50 naar 41.2mm en dan beide…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
With this I can get square nodes out much faster. Tested against super thick and tight pixstrip extreme, I've only pulled 30ish pixels with this so far but it's held up okay, v3 reinforces it a bit and makes it pointer for easier wedging.…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
STAIR LED BOX BASE002_0.4n_0.2mm_PETG_MK4IS_9h53m
Wydruk około 12,06 €–14,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My 92mm remix of the High Efficiency Noctua grill. I made this version as a trimmed down section from Noctua grill which insn't simply shrunk down. Thus removing excess smaller struts. Cropped to fit the edges of a 92mm fan perfectly so…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
Assortment of simple nail-in cable clips. Cable diameters: 3-12mm in 1mm steps. Nail diameter: 2mm Category: DIY
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: 5mm/s or lower…
Y'all know that FDM printers are not ideal for printing minis but hey, it's possible, and you can get pretty damn good prints if you tune it correctly. Main things I've noticed made a difference were : Layer Height, of course The printing…
xpectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 20mm/s…
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5-10mm/s…
Collection of Gridfinity basic cups height 4 (32mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
22.02.24 - Added corner K1C logo 28.11.23 - Added ventilation grille (2 versions) for the 22mm version is printed without support in one model, nothing needs to be assembled (Disassembled model for if you want to assemble from 2 different…
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
🎒 Backpack Clip 32mm A simple and reliable clip designed to attach gear to your backpack, bag, or belt. 🔩 🎯 Perfect for: Attaching gear to backpacks 🎒 Hiking & outdoor use 🥾 Everyday carry (EDC) 🔑 Happy printing! 🙌 📸 Printed one? Post a…
Designing simple spacers is an often recurring simple task that is not very exciting. It is much more fun to write a program does my work for me, so that is what I did. My program has generated .stl files for all spacers that anyone will…
I present you a new top cover for the Centauri Carbon 1 w/Canvas! My design is shorter, only 172mm tall, while still allowing full motion. The stock PTFE tubes length has been shortened by ~70-75mm. The Canvas has been relocated lower in…
Expectations: Don't expect a screw that is strong as its metal counterpart, but it will do the job for low stress applications. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 5mm/s…
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
Credit: https://www.myminifactory.com/users/Ravens
A set of simple tried and tested pipe insulation cutting templates. I was sick of doing it by eye and then noticed people selling similar online but they were either overpriced or a bit "janky". I spent a fair bit of time sorting these…
Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…
Various dead skeletons. These are meant to be used as scatter terrain. 28/32mm scale. Did these people die like this? Is there a story behind each skeleton? Or is some twisted freak posing the bones for fun? I guess that's up to you!…
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 25mm/s…
A simple adapter to connect two 32mm / 1.25" pool hoses. That's it that's all..
Expectations: Don't expect a screw that is strong as its metal counterpart, but i will do the job for low stress application. The screw may need to be resized because of inaccuracy of FDM printing. Print settings: Speed: about 30mm/s…
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the…
These miniature bases are compatible with Warhammer 40k, Age of Sigmar, Battle Tech and many other table top games. Available WITH and WITHOUT hexagonal holes for the miniature pins. We recommend to print upside down on a textured plate…
Note: “Detect Thin Walls” May need to be enabled if printing a wall width the same as your nozzle width. All cubes are 20mm x 20mm externally. Cube perimeters and base are the same respective size. For example, the 0.6mm cube's walls are…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
The badge on my E91 looked terrible and I've decided to design and print a replacement, because this is what people with 3D printers do, right? This badge has a diameter of 82mm and is designed to replace the hood badge of a BMW E90 , I…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
Patch dispenser designed to accommodate 22mm square patches provided by Pistol New Zealand (PNZ) for IPSC targets. Features a check window and roll directional guide. Print flat side down. Have printed once so far in PLA+, very strong and…
My friend asked me to make him some 32mm bases so I wiped this up real quick. Very quick and simple print. .4mm Nozzle .2mm Layer Height
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
![Nail-in Cable Clip [3-12mm Assortment]](https://media.printables.com/media/prints/633203/images/5012989_b04f63af-5a91-4e4b-bcdb-120b551b2321_1964838e-5184-4627-9b23-d65ca6a17420/large_display_assortment_633203.png)
