571 modeli
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
The newer Ender 3 V3 SEs have different extruder motors, for some reason, compared to the early ones. How can you identify it? The newer ones don't have screw mounts on the sides and have a silver plate compared to the black plate with…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
(English below) Ein klassisches Problem des Prusa XL, insbesondere bei höheren Umgebungstemperaturen oder Verwendung eines Enclosures: Die MCU überhitzt. Ihr Abdeckblech bietet keine Möglichkeit zur Entwärmung, da weder Kühlrippen,…
Wydruk około 9,43 €–11,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
This is a simple honeycomb fan grill for 40x40mm fans, as they are typically found on consumer grade 3D printers.
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
MK15.1 is the latest and suggested version to use, the other versions may not work as expected but have been left here for users that already have the previous versions and want to print it again. Hexagon Pattern can be printed with two…
Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
4010 Mount for Ender 3 v3 se
Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.
config file for using the fan to cool a Raspberry pi on Klipper [temperature_fan Raspberry_Pi] ;## Connect Raspberry Pi Fan in LED-G position pin: PB5 max_power: 1.0 shutdown_speed: 0.0 cycle_time: 0.01 hardware_pwm: false…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
Description I couldn't find a good case for the Raspberry Pi 4 that had all the features I wanted, so I decided to make my own. Here's what makes mine unique: Held together with screws. Snap-fit cases are great if your printer is REALLY…
Introducing the Mount for the Dual 4010 Blower and 4010 Hotend Fan. 🛠 Features: Purpose-built for accommodating the dual 4010 blower and 4010 hotend fan, ensuring efficient cooling. Final version got kitty ears :3 📏 BOM: 4x M2 nuts 2x M3…
BTT SKR Mini E3 4010 Fan holder. (For voron V0.1 or other printers) -3x M3x25 Screw for board and holder. -2x-4x M3 Screw for fan fix (length depends on the fan) -Ink. STP Assy. for Remix. I use for V2 but its work with v1.2 and v3 also.
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
Detail printing by entry down with supports. Layer height 0.2 mm Nozzle 0.4 mm
Later edit: I have added a 20mm tall version i prefer the 25 because i can easily remove/insert the Neopixel and Det Plug for the 20mm version you will need M3x25mm instead of M3x30 If you want to but this Board here is an affiliate link…
ok i have fixed the old versions flaws and now this works great. make sure to have the fans blow away from the board. the MCU fan now blows out the original hole. you can make these changes in your printer.cfg to have the fans use PID.…
V1.1 Update: Redid some of the geometry at the front, modified the back for better and more enclosed hotend and cooling air separation and for better cable routing. It's a remix of the miniSatsana fan duct and hot-end cover for the Ender…
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
Simple fan mount replacing the whole Ender 3 V3 KE extruder housing, while improving on it by including a bigger 4010 fan. It's designed to be printed easily, without unnecessary overhangs, at the expense of some additional weight and…
After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…
3D model of fan 4010 in f3d and step format
Replacement blades, in the style of the T33.
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…
First of all: What is this about? I really like the look of the Mini Stealhburner, but I dont like its weak cooling performance on my Voron 0.2. This printer is capable of printing fast - especially with a CHT nozzle. But overhangs,…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…
I wanted to use the Dual 4010 blower version of the Mini Satsana duct on my Ender 3 V2 but I couldn't find a remix that had converted it to be compatible with my printer so I made it myself. I also made it height adjustable to allow…
I wasn't happy with the 4020 Noctua fan, so I decided to use the 4010 that came from the part cooler on the hot end. It's a lot more tolerable than the stock fan, and will be a good upgrade for anyone that has an extra 4010 fan laying…
The ENDER 3 VE SE Dual Fan Project. Hi everyone, As I was looking at my Ender 3 V3 SE, I got the feeling than the original fan shell was too common and lacking some originality. As I also had another brushless Creality 4010 fan as spare…
This design is a simple fan duct made for the BIQU H2. It mounts on the front of the extruder itself and is very simple. The duct is fixed position, as this is just easiest for me to design - please feel free to comment if you have any…
I tried a lot of fans and fan mounts for part cooling for the BIQU H2 on my Ender 3 - nothing worked really So i designed this 4010 radial fan mount. It is simple and works. i also designed a fan shroud fitting this setup. Note on BIQU H2…
Source file: https://cad.onshape.com/documents/6d2b5ab70346f30288cee4bc/w/581da15e481f8d17d003e36b/e/63c9a12203e9ab6971e0f0a6?renderMode=0&uiState=62ba698e4404174302000963 Small change to the v4. The slice engineering mk8 heat break was a…
Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…
Print in PETG, 0.2mm layer height, no support required. Press fits nicely. Do this mod at your own risk. :) (Optional but recommended) Carefully push the fan blades from both sides to remove the fan blade rotor from the casing. Cut all…
I loved the minimal footprint of the original eB shroud, but was still having trouble with one-sided cooling. This remix adds a second fan and moves them to either side, with the same core designed by gibbed. No supports needed 25 grams…
You want to use the angled fan mount for the Ender 3 V3 SE but cannot use them because you have the newer version that does not have the side extractor screws? Now you can. Using the low profile bracket to screw into the heat sync, I…
I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock configuration please check out my single fan shroud here;…
Since I wasn't able to find any model that fits on the stock ender 3 fan, I've designed this model to replace the blades of the stock fan, it fits with pressure and works pretty well. Just be sure to rip everything from the broken blades…
Dual 4010 fan duct for E3D v6 setups Optimized for ease-of-use and broad compatibility with different setups. If you have any requests or suggestions, leave a comment and I'll see what I can do! Features: - Unobstructed front, so you can…
This is a fan duct for the Franzoli Direct Drive Ender 3. I have an Ender 3 v2, and since I printed this direct drive, I've had better, faster, and shorter retractions, but I've also encountered a lot of cooling problems, such as curling…
The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm
Aim to add a 4010 fan on the ptfe hole to get better drying performance Use the 5.5*2.1 DC Power splitter to get power for the fan from the origin power supply BOM 5.5*2.1 DC-022B Female Jack…
Based on the ingenious design by [jwags55](https://www.thingiverse.com/jwags55). This remix is designed to fit standard 4010 fans (with or without built-in nut traps). It should be a tight fit on 35mm DIN Rails and hold the fan securely.…
This bracket was designed to mount a 40x40x10mm fan onto the SKR Pico board, compatible with RPI3, RPI4, RPI5. Use 4 BHCS M3*14 screws and nuts to mount the fan on the bracket, and then install the bracket on the motherboard with M2.5 or…
Personal Test. Needed to transfer/upload files :)
Updated: MMU version so you can print the Voron logo in-place. Follow this guide to calibrate your printer to do it Updated: Faceplate now can support both 3010 and 4010. Put heated inserts in the correct location depending on what fan…
I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…
I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…
This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in…
Somehow I broke one of the blades on my Ender 5 Plus hotend fan. I didn't have a replacement and didn't want to wait for shipping on a new fan so I made a new blade to replace the broken one. This blade will require you to remove all…
I wanted to have a fan duct with 2 noctua fans. Primary 4020 fan for hotend and secondary 4010 fan for cooling of the printed part and also easy accesibility to replace the nozzle or to do maintenance on the hotend. For installation you…
This is a quieter, lighter, and smaller (in every direction) fan shroud than the stock shroud for the Ender 3 V2. I really liked the design of Printercat64's fan shroud , but when I tried to fit it on my printer (even after modifying the…
Bigtreetech Octopus cooling 4010
This is a little optimization of the original setsana - mini remix. I removed the the bridge between the two fanduct to have a better view of hotend. This mod keeps all advantage of setsana fan duct more: -4% of material -3% print time…
Its a adapter for 3010 fan to fit in 4010 fan enclosure. Increase wall count for the screw to fit tight. Fast print and no support needed.
Original Model's Issues I really liked the original Satsana remix that Kenny did in the form of the Mini Satsana, but I found the BL Touch mount made for it functioned really poorly for me in two major areas: I found that the mount could…
4010 format cooler holder for cooling the extruder motor to solve the known problem of overheating and jamming of the rod. It features convenient installation - without the need to remove the filament and reinforced side holders. Printed…
The new slim K1 shroud now supports my improved fan ducts (finally managed to learn how to do that). Print the ducts in PETG, ABS or ASA. The shroud can be printed in what you want, maybe not flexible filaments :) -BOM: 10x M3*8 Screws 8x…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Gyroid Filament brand: ICE Filaments Filament color: Red Filament material: PLA Notes: "Support overhang angle" set to 88 degree…
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
this is a fan blade for 4010 size creality fan…
The RP2040 chip of the LDO Nitehawk SB toolhead board gets very hot with an enclosed chamber and is also mounted on the back side of the board facing the extruder motor which adds to its heat exposure. For a 55C+ chamber temperature I was…
⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…
I remixed Nadir's CN3D cover version for a 4010 fan above because I didn't have a 3010. I also added some holes for cable tie mounting and optimized air outlets. Before use, check the distance between the cover and the upper front…
https://cults3d.com/en/3d-model/tool/minimus-hotend-cooler-system remix/mod ROGUE_DESIGNS -Keep your machine Lite and Accurate- Removes in seconds. Tuned & focused cooling. Effective parts cooling at 60% fan speed. Excellent visibility of…
I needed a case to fit the BigTreeTech PiTFT50 v 2.1. There are several cases out there for prior versions of the screen, but I couldn't find one to fit the latest version that I liked. There are a couple of key differences in v2.1 versus…
I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version.…
Fan Mount for BIQU CB1 Heatsink. I have included 2 files. One for mounting screws from bottom (Threaded) and one to screw down from above (this was made specifically for the Manta m5p board, as the screws are placed from the top down, but…
As said above a modified shroud made to fit three 40x10 fans. Low profile mount for the hot end for reduced air travel and sleeker look. Also vertically rotated nozzle cooling fans with a customized exhaust for optimal cooling (Aero…
Made some adjustments to the great original design by k.grzegorczyk . Printed out of PETG and used 4 x 10 mm socket head bolts to secure the fan to the bracket. https://wiki.bambulab.com/en/p1/manual/precautions-for-P1P-enclosure
Here's a fancy set of 4010 tool heads based off the updated CFD-tuned air ducts! This model adds an Ender NG logo cutout over the fan as a fancy grill. I also fixed the stringy bridges in the lower vent by reshaping the duct (see…
Due to the lack of mounting points in newer printers, I made a version that attaches to the motor without any complications. Needed parts: 4x - 3Mx25 screw for 4020 fan (3Mx15 for 4010 i guess) 4x 3M heatset
I originally made it for a new fanduct, I designed for my Phaetus Dragon. You can find it in my prints :-) It fits a standard 4010 blower fan. Print time for me was about 1 hour.
This replaces the original Shroud For 40x25mm Hot-End Fan and the stock 4010 Blower Fan! I made a new shroud from scratch for a upgraded 40x25mm Hot-End Fan and the stock 4010 Blower Fan (and its mounting) for Creality Ender-3 V2. The…
Double duct for ceramic hotend If you have printed a model, please leave a review and share a photo of the finished part, which will help others make a choice.
Fan duct for ender 3 s1 Adding an additional fan to cool the media can offer a number of significant benefits to print quality. Overhangs: Controlled cooling helps to print overhangs more accurately, as the material does not have the…
Still in Beta, requires some testing to make sure everything works well. Requires m3x50 BHCS, heatset inserts, and 4 m2x12 screws. Modified Long's Mantis X Carriage with KlickyNG. Mini Sherpa Extruder. Bambu Hot End. 4010 Blower Fans.
A Support for the v3 bip&go highway badge Print Settings Printer: Scalar XL premium Rafts: No Supports: No Resolution: 0,2 Infill: 10% Filament: Amazo pla white Notes: i had to print the thing 8 times before getting a usable model, would…
Check that lines are wide enough to avoid holes and cracks, cause walls are really thin :) Nice to combine with 5015 holder listed here.
A separate adapter to use the original 4010-part cooling fan to cool the hotend! Compatible with model 359910 Zero Y-offset CR Touch mount and many replacement parts cooling ducts including the Taurus V4. Recommended printing in PETG or…
https://github.com/VzBoT3D/VzBoT-Vz330
This is a simple fan adapter, that allows you to mount the blower 5015 in place of the standard fan 4010 4020 etc, without significantly increasing the thickness of the entire object. For example, as an airflow in front of an extruder At…
