Wyniki wyszukiwania: 8in

Sortowanie

143 modeli

P
Printablesbsfiosco

Stellarvue MH002 8in Vixen Mounting Rail

I use a Losmandy AZ8 Alt/Az mount for visual observing and when not using the slow motion controls on the mount I found I didn't like to push on the telescope itself when star hopping. Stellarvue for some time made a handle (MH002) for…

Pobrania
6
Polubienia
1
Ocena
0
P
Printablesjeepers01

ESP32 2.8inch Touch IPS CYD LCD Screen Case

ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…

Pobrania
2795
Polubienia
137
Ocena
4,6
P
Printablescekpi7

8in (200mm) speaker grill

Printable speaker grill for audio projects. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville RXM 84). I've printed mine with ABS so they won't deform under higher temperatures.

Pobrania
770
Polubienia
49
Ocena
0
P
PrintablesBigBauceMan

Waveshare RP2040 MCU Board with 1.28inch Round LCD Watch Case

Case for the Waveshare RP2040 MCU Board 1.28" LCD screen. This case will hold a 350mah Battery (602030). I have included the code for the watch face. I am not a coder, so please dont rip me apart :) I used a combination of a bunch of…

Pobrania
692
Polubienia
30
Ocena
5
P
PrintablesRichards Makes

6in, 8in, 10in, 12in, 13in, and 14in Tunable Drums with accesssories

I have an updated version at the following link https://www.printables.com/model/753753-3d-printed-marching-tenors-with-attachements Small tunable drums using standard drum heads and 10-32 x 1-1/2" screws. This was modeled in Fusion 360.…

Pobrania
682
Polubienia
140
Ocena
4,25
P
PrintablesJazzzzX

Waveshare ESP32S3 2.8inch Display Case

This is a case for waveshare ESP32S3 2.8 inch Display case. With speaker grill, screw, Memory card slot,buttons vent. https://www.waveshare.com/esp32-s3-touch-lcd-2.8.htm

Pobrania
623
Polubienia
18
Ocena
4
P
PrintablesKevin Barker

Gridfinity Bins for Mitutoyo Digital Calipers (4in, 6in, and 8in)

These are bins designed specifically to hold Mitutoyo digital calipers for Zach Freedman's Gridfinity system. I designed them around models 500-195-30 (4"), 500-196-30 (6”), and 500-197-30 (8”), but they may also fit other brands or…

Pobrania
572
Polubienia
58
Ocena
0
P
PrintablesPeter Davis

Gridfinity Shadow Tray- Milwaukee 3/8in Ratchet 2557-20

My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 3/8in Ratchet…

Pobrania
503
Polubienia
163
Ocena
5
P
Printablesdjunod

Waveshare 1.28inch LCD Module

I have a number of these Waveshare 1.28inch LCD Modules that I want to build things with. This is the base piece for holding one of these screens. I've printed with PLA and PETG. Amazon Link:…

Pobrania
487
Polubienia
22
Ocena
0
P
PrintablesJake Hunsaker

Gridfinity 3/8in Metric Socket Holder 10-19mm

This is my 3/8in drive gridfinity socket holder for 10-19mm shallow and deep sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of extra clearance so other brands may fit. For text filament swaps at…

Pobrania
405
Polubienia
67
Ocena
4,5
P
PrintablesJake Hunsaker

Gridfinity 3/8in SAE ('murican) Socket Holder

A Gridfinity socket holder for 3/8in drive SAE/Imperial/American sized sockets. One model has “SAE” for the text, the other has a more whimsical 'MURICAN stamp, as seen in the cover photo. Holds 7/16 thru 7/8 sized sockets in 3/8in drive.…

Pobrania
398
Polubienia
67
Ocena
4,5
P
PrintablesTHIRSTYLOTUS

6x8in To 6.5in Speaker Adapter

This should fit most Fords with the stock 6x8 speaker and adapt it to the more common 6.5in speaker. Fasteners: This uses M4 or M3 threaded inserts to hold the speaker in place. There is a 2mm 60 degree chamfer on the opening for the…

Pobrania
369
Polubienia
19
Ocena
0
P
PrintablesBubsBuilds

Desktop Caliper Stand - 8in V2

A desktop caliper stand for 8 inch calipers (works ok for 6 in), designed using Generative Design tools in Fusion360. Prints nicely using Prusa's organic supports. I've printed several of these now for myself and coworkers from both PETG…

Pobrania
368
Polubienia
144
Ocena
5
P
PrintablesMordevolt

ESP32 2.8inch Touch IPS CYD LCD Screen Case usb-c - lager cutout

Small modification of original model, lager hole added, since my screen have extra usb-c port for power and data. Also link to Onshape, if you want to modify it more:…

Pobrania
350
Polubienia
15
Ocena
0
P
PrintablesCade Hardy

Cable holder, cable clip 8in zip ties

Cable holder, cable clip 8in zip ties

Pobrania
298
Polubienia
37
Ocena
5
P
PrintablesQuinlan Smith

Replacement Parts: Black MAX - 1 for 1 - 8in Lawn Mower Wheel

8" Push Mower Wheel STEP file has 3 parts for no support printing as well as multi-material printing. Axle - No Bearing required (some sort of lubricant helpful) Diameter: 13.5mm (0.53in) Depth: 32mm (1.26in) Direct front 8" wheel…

Pobrania
219
Polubienia
37
Ocena
0
P
Printablesusmcletts

8in to 4in DUCT 6in Tall

8 inch to 4 inch duct reducer at 6 inches tall. I do have a shorter duct that is 4 inches tall. Dimensions are 8" ID to 4" OD by 6" Tall No supports are needed but may want to use a brim.

Pobrania
205
Polubienia
10
Ocena
0
P
PrintablesLaszlo

Gridfinity CNC/Router Bit Holder (1/8in, 1/4in)

These are storage trays for different common end mills that were designed for the Gridfinity organization system by ZackFreedman. If you want to see a video of how they work, check out my video on them: Storage Types: CNC Bit Cases (Loose…

Pobrania
203
Polubienia
28
Ocena
5
P
Printables3DCoded

8in Pumpkin Container (Vase Mode)

This is a large pumpkin container meant for printing in Vase Mode, based on 3D Printy's amazing Fusion 360 Pumpkin Tutorial.

Pobrania
198
Polubienia
16
Ocena
5
P
PrintablesChris

Pipe support clamp for 3/4in type L copper and 3/8in threaded rod

Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for…

Pobrania
179
Polubienia
35
Ocena
0
P
PrintablesHack_n_Splice

Bahtinov Mask 8in Schmidt-Cassegrain Telescope

I modeled my own version of a standard Bahtinov focusing mask. The general profile for the structure was generated automatically using the following free online utility: http://astrojargon.net/maskgen.aspx (link broken, unfortunately) I…

Pobrania
177
Polubienia
11
Ocena
0
P
Printablescekpi7

8in (200mm) speaker ring

Printable speaker ring for audio projects. I've printed mine without bottom layers and after i filled it with resin. No issues so far. Designed to fit Pride Diamond 8 V2, but they should fit many other speakers (tested also with Rockville…

Pobrania
167
Polubienia
7
Ocena
0
P
PrintablesMasrawy

Vaccum hose adapter 1-7/8in to 2-1/2in

Vaccum hose adapter 1-7/8in to 2-1/2in for shopvac

Pobrania
164
Polubienia
7
Ocena
0
P
Printablesvumaq

Waveshare ESP32-S3 1.8inch AMOLED Touch Display - 3D USBc power/charging base

Features Perfect Fit: Precisely dimensioned cradle ensures a snug, wobble‑free fit for the Waveshare ESP32-S3 1.8inch AMOLED Touch Display module. Integrated USB‑C Port: Built‑in cut-out accepts a NOTOW Elbow USB-A to USB-C 90° braided…

Pobrania
157
Polubienia
24
Ocena
0
P
Printablesbce.gatien

Sanding Block for 457mm sanding belts (18in)

A Sanding Block that use 75 x 457 mm abrasive belt (3 X 18 inches) Print the following 5 parts : Body-A, Body-B, Lever, Pin, Spacer+0 This Sanding Block will accommodate most 75 x 457 mm abrasive belt (3 X 18 inches). You may need to…

Pobrania
154
Polubienia
33
Ocena
4
P
Printablestjsoco

Kindle grab bars Paperwhite 6.8inch (11th Generation)(2021) (OpenSCAD)

The Paperwhite is very light weight but very hard to hold. These grab bars solve the problem. I liked these 2 designs, but they didn't work for me. They inspired me to create a new model.…

Pobrania
151
Polubienia
21
Ocena
4,5
P
Printablesusmcletts

8in To 4in DUCT 4in Tall

8 inch to 4 inch duct reducer at 6 inches tall. I do have a taller duct that is 6 inches tall. Dimensions are 8" ID to 4" OD by 6" Tall No supports are needed but may want to use a brim.

Pobrania
141
Polubienia
6
Ocena
0
P
PrintablesJace

Threaded Grommet Pass-Thru for 1-5/8in Hole, 1-3/8in ID

I needed a pass thru for a 1-5/8" hole with a 1 3/8" ID and couldn't find a good one, so I made it. Prints without supports in almost any filament on any printer, and it scales well. Cheers, and thanks for looking!

Pobrania
136
Polubienia
16
Ocena
5
P
Printablesandrepadua

Gridfinity Bin for Mitutoyo 500-197-30 Caliper 20cm 8inch

A gridfinity bin for my Mitutoyo Calipers (500-197-30). Click here for an Affiliate link! It also has storage for the Mitutoyo 6"/15cm Steel Rule . The top part will work in PLA, but i printed it in Overture TPU . The bottom part was…

Pobrania
135
Polubienia
9
Ocena
0
P
PrintablesRevHazlett

3/8in Compression Cap Cover

We started demolition on our bathroom for a remodel after the kids went to bed and found that one of our sink valves had gone out and was dripping. It's after midnight, the stores are closed. So... I looked up the schematics on a cap,…

Pobrania
134
Polubienia
6
Ocena
0
P
PrintablesMartin Mikloš

KeyChain Bottle Opener & Phone Stand 8in1 multitool

There are no doubts that bottle openners are the most useful key chain tools ever :-) But I have allways been thinking about mixing it together with phone stand that I allways miss when needed most! Additionally, I added some other cool…

Pobrania
128
Polubienia
41
Ocena
0
P
PrintablesWiseone

3/8in Metric Deep Socket Tray

My impact socket set came with a metal socket rail, that I find unhelpful when I have I want to use my sockets directly from my tool chest. This 3D print provides a tray that my sockets sit in. The sockets are easy to get out and to…

Pobrania
126
Polubienia
23
Ocena
0
P
PrintablesS197 Designs

Gridfinity 3/8in Drive Collection - Quinn & Husky

The extensions and ratchet holder will likely work with other brands. The sockets are mostly for Husky sockets.

Pobrania
123
Polubienia
39
Ocena
0
P
PrintablesRD Print Lab

Mini Ball Thrower, 47mm (1.8in)

The model was designed to be printed at 75% scale for a 47mm (1.8in) diameter Kong tennis ball. At 75% scale, the two parts are connected together using: Square Head Screw; ¼"-20 Thread, 1-½" Long (McMaster-Carr Part Number: 91465A107)…

Pobrania
122
Polubienia
10
Ocena
0
P
PrintablesAlteRob

3/8in Acorn Nut

This threaded acorn nut for 3/8 inch rod is intended to be used as a safety end cap rather than a structural piece. I'm using it as part of my spool holder. Print Settings Printer: D-Bot CoreXY Rafts: No Supports: No Resolution: 0.2…

Pobrania
119
Polubienia
3
Ocena
0
P
PrintablesBubsBuilds

Pocket Socket Bar - 3/8in Drive

A little socket holder that I mainly use for grouping random/loose sockets in my toolbox and for grabbing small sets of sockets to carry around (hence the 'pocket socket' name) when working on something specific. It keeps me from having…

Pobrania
110
Polubienia
9
Ocena
4
P
PrintablesBoobFrog

Antminer L3+ 4 in 1 Asic Silencing and Cooling Kit 200mm / 8in Fan shroud

English version: Welcome to the Fan Upgrade Kit for the Antminer L3/L3+! These high-quality 3D print files allow you to replace the original fans of your Antminer L3/L3+ with a powerful 200mm fan. With this upgrade, you can improve the…

Pobrania
109
Polubienia
15
Ocena
0
P
PrintablesTbrehm12

12GA Channel Strut 1 5/8in. x 1 5/8in.

12GA Channel Strut 1 5/8in. x 1 5/8in. designed for use with modeling accessories or hardware. Compare to: https://www.lowes.com/pd/Adamax-Adamax-12-Gauge-Channel-Strut-EG-10-FT/5001905073 CAD models attached.

Pobrania
106
Polubienia
10
Ocena
0
P
PrintablesWinged Hussar

1.98inch Trailer Wheel BEARING Dust Cover

Keep your grease in your wheel bearings I Printed with .12 mm layer height, 100% infill, and 3 walls so it would be ridged enough to preform its designed task.

Pobrania
106
Polubienia
8
Ocena
5
P
PrintablesMatamata

Delta Cruzer 1 5/8in to 2 1/4 Rigid Shop Vac Adapter

Customized version of https://www.thingiverse.com/thing:1246651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1246651 Instructions Using the following options: LargeEndMeasured = inside LargeEndDiameter…

Pobrania
97
Polubienia
12
Ocena
0
P
PrintablesThaís Pedrosa

Spool Wall Rack for 7/8in dowel

A spool Wall Mount Rack using 2 7/8in dowels to fit a hole of 23mm based on Tech Wave's v2 model.

Pobrania
96
Polubienia
13
Ocena
0
P
Printablesvidision

Ginormous Paper Clips (8in, 6in, 4in)

The silver model here was printed in PLA with 0.20mm layers but 0 top and bottom layers to let the infill show thru.

Pobrania
90
Polubienia
60
Ocena
4
P
PrintablesAlex_Doe

Antminer S21,Pro,Ks3,Xp,S19 to 8inch(200mm) Psu DUST

Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3 and its Power Supply. With this flange you can easily hang it on the wall or anywhere else. Creality Cloud…

Pobrania
89
Polubienia
5
Ocena
0
P
Printablesjbennet-t

5/8in Microphone Holder to 1/4in Tripod Adapter

Adapter between a 5/8in threaded microphone holder and a 1/4in threaded camera tripod. Pretty specific in terms of use, but definitely useful for someone. Threadings and fit have been tested. -Would definitely recommend 25+ % infill since…

Pobrania
87
Polubienia
3
Ocena
0
P
PrintablesChris Buisson

3/8in Drive Harbor Freight Socket Set Stand Organizer Tray

Fits a 3/8in drive 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm and 21mm socket. One model is the full organizer, then the other 2 models are it split in half to fit on a standard size printer.

Pobrania
85
Polubienia
15
Ocena
0
P
PrintablesRoyal Farris

TFT128x160 1.8in and wroom32 esp32

A rather large box made for a wroom32 ESP32 dev board together with a 1.8 inch TFT display at 128x160 pixels. The box is big enough to use breadboard cables to connect the screen to the ESP. Grooves for miroswitches 6x6mm on the sides.…

Pobrania
80
Polubienia
8
Ocena
0
P
PrintablesSKT

Hose Connector | Magnetic | Duct Adapter | 200mm 8inch

Used magnets: 10mm x 2mm (6 each) The male adapter has a protruding lip in order to make a better seal against leaking gases or vocs. It's also possible to simply connect two female adapters. These are quicker and easier to print but…

Pobrania
79
Polubienia
8
Ocena
5
P
Printables3DCoded

Tall 8in Pumpkin Box (Vase Mode)

This is a taller version of the 8in Pumpkin Box that can be used to store about double the candy! Print Instructions: Print in Vase Mode with any layer height you want. I usually choose the coarsest layer height allowed for my nozzle with…

Pobrania
75
Polubienia
11
Ocena
5
P
PrintablesLANPartyCEO

CoPrint 8in1 Module Reworked

Long Version: Fixed internal geometry to remove leftover edges that could cause uneven internal feed surface when printed at fine layer heights ( Added additional 8th filament pathway to accommodate use with the ChromaPrint System Short…

Pobrania
72
Polubienia
10
Ocena
5
P
PrintablesMorz

Voron V0.1 Tophat Freedom Clips - 3mm - 1/8in

These are Voron V0.1 Tophat Panel clips remixed and optimized for 3mm (~1/8 in") thick polycarb/acrylic panels found in the US. The slots for the panels were sized up from the initial 1.5mm to 3mm so that there will be a better fit. They…

Pobrania
65
Polubienia
13
Ocena
5
P
PrintablesZacsquatch

Spool Wall Rack 5/8in dowel

a cheaper alternative to the original model . it will fit 5/8in dowels which are readily available in craft sections. the downside is they are 36in long . my local hardware has 48in options available too but with this version i can print…

Pobrania
64
Polubienia
7
Ocena
5
P

Slatwall 18inch Bracket

For assembly - requires 1-inch dowel: - x1 455mm length; - x1 445mm length; Such length allows for two brackets to be built out of a 6-foot, 1-inch dowel!

Pobrania
64
Polubienia
16
Ocena
0
P
PrintablesJer

Inline Grill for 8in Duct

Duct grill with both a male and female end. A remix of my female-only "end cap" grate . Safety Notes As with any custom fabricated object, use materials appropriate for the application. If any kind of heat or fire resistance is needed,…

Pobrania
61
Polubienia
5
Ocena
0
P
Printableseyefly

Tubular 8inch LongRange frame - superlight and superstiff - build it at home - no CNC needed

This is the 8" version of the Tubular frame. 6" version: https://www.thingiverse.com/thing:5368370 7" version: https://www.thingiverse.com/thing:5365636 If you plan on building one or would like to get more info, there is a Discord server…

Pobrania
54
Polubienia
12
Ocena
0
P
PrintablesdyeLucky

Hook Ledge for New Age Pet Mojave Reptile Terrarium (48in)

I have a 48in New Age Pet Mojave terrarium & needed something to help anchor a rope 'ladder' to the side of the terrarium, so I designed this ledge to fit into the slots on the side of the terrarium.

Pobrania
52
Polubienia
24
Ocena
0
P
PrintablesAngie

Ikea Lack 8in Leg Extension

Extension leg to add 8 inches of height to Ikea Lack tables. Easy to install, simply slot the leg into the top of the leg, if added stability is needed, there are 2 screw holes with counter sinks to securely attack the leg to the Lack legs.

Pobrania
52
Polubienia
1
Ocena
0
P
PrintablesClough42

Shars 8in Dial Height Gage Gridfinity

Created using Zack Freedman's Fusion template: https://a360.co/3ccHbsg Copyright (c) 2023 Zachary Freedman and Voidstar Lab LLC

Pobrania
52
Polubienia
10
Ocena
0
P
PrintablesCO3D-Designs
Pobrania
51
Polubienia
4
Ocena
0
P
PrintablesNiclas S

Mi x Wiha 8in1 Skadis holder

A simple holder for the Mi x Wiha 8in1 screwdriver / ratchet for skadis boards. Uses 2 slots. prints without support on the bottom site

Pobrania
51
Polubienia
2
Ocena
0
P
PrintablesAlex_Doe

Antminer S21,Pro,Ks3,Xp,S19 to 8inch(200mm)

Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3. With this flange you can easily hang it on the wall or anywhere else.…

Pobrania
49
Polubienia
1
Ocena
0

Printer Large Format Canon for 18in Doll

Makers of all sizes, need a good printer.

Pobrania
48
Polubienia
18
Ocena
0
P
Printablesjohnzanussi

Minions Eye Goggle for 2.8in Display

Full instructions on how to create your own Minions pumpkin with animated eye on my website. https://johnzanussi.com/posts/minions-pumpkin-animated-eye#part-2-how-to

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesSanchoPwnza

Monitor Stand - 8in tall - hexagon shapes - made for 2mm sheet

Monitor stand I created for my work desk. It's made to accommodate a 2mm-thick carbon fiber sheet. The sheet shown in the pictures is 400mm x 300mm x 2mm. The shelf surface is 8in off of the desk. Original document in Onshape:…

Pobrania
45
Polubienia
16
Ocena
0

Lasko 18in Fan Blades

Replacement fan blades for Lasko 18in fan and similar models. Print fan hub using supports, only on build plate. x1 Print fan blades, orient flat on build plate. x4 Print both completely solid with any material. ABS OR PETG recommended.…

Pobrania
45
Polubienia
3
Ocena
0
P
PrintablesJer

End Cap Grill for 8in Duct - Female

Fits over the tapered end of a duct fitting or inline duct fan. Also available as a male+female in-line fitting . Safety Notes As with any custom fabricated object, use materials appropriate for the application. If any kind of heat or…

Pobrania
44
Polubienia
7
Ocena
0
P
Printablesfifonik

Caps (TPU) for 8in1 charging cable (Deans/T-plug, XT60, Tamiya Mini, TRX, EC3) and XT30 F

I've bougth SKYRC B6neo 2 charger (awesome thing!) that comes with 8-in-1 charging cable and was shocked that the cable does not have any caps so it is very easy to short curcuit when charging batteries. So I modelled caps for most of the…

Pobrania
41
Polubienia
16
Ocena
0
P
PrintablesMichael

SR Suntour fork Tool /w Flats + 3/8in drive

Tool to remove SR Suntour top caps for service. Changed to a 3/8in square drive, and added wrench flats for adjustable

Pobrania
40
Polubienia
3
Ocena
4
P
PrintablesMarc

8in Moen Eva Faucet Drip Catch

This project's scope was to catch drips from children's wet hands operating the faucet and optional soap dispenser. The design is for an 8" spacing Moen Eva faucet but could work for other 8" faucets. The soap dispenser tray was designed…

Pobrania
40
Polubienia
9
Ocena
0
P
PrintablesWiseone

Short 3/8in Metric Socket Tray

A 3/8" Metric Socket Tray for short sockets. The range covered is a little broken, but covers my key sizes. Holes for socket sizes: 11, 12, 13, 16 and 17mm I hope you can find this print useful, too. Print instructions To make the print…

Pobrania
39
Polubienia
10
Ocena
0
P
PrintablesAlbinoyeti25

Gridfinity Bin for Mitutoyo 8in Caliper

1x3 Gridfinity bin for Mitutoyo 8in Caliper. Remixed from Gridfinity Caliper Holder by Zach Freedman.

Pobrania
37
Polubienia
5
Ocena
4
P
PrintablesArek Kożuch

Moza Mount for DDU Simracing (VoCore 6.8in)

Added holes in back DDU so screen can fit on the front of Moza R9/R12 base. Utilized 2x M6x20 Hex screws.

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesmaxchu765

Pittsburgh 3/8in. Metric Deep Impact Socket Magnetic Organizer

Requires 16 8mm dia. x 2mm tall disc magnets. Pause print after z height 2.5mm to add the magnets

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesAlex01

Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT

Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing

Pobrania
34
Polubienia
0
Ocena
0
P
Printablesabprice96

Wide 1-3/8in (~35mm) Closet Rod T Connector

This is a T connector for 1 3/8in (1.375in ~ 35mm) closet rods. I needed a wide T connector because the rods needed to connect where the shelf support was so I needed a T connector as seen in the picture. The shaft size is set to 1.4in…

Pobrania
32
Polubienia
9
Ocena
0
P
PrintablesKenneth Roecks

Action Figure Stand - 6-8inch

The original stand expects the waist of your figure to be at 160mm, or about 6.5". Since my figure waists were closer to 4-5", I reduced the arm length to variants of 90/100/110mm to match.

Pobrania
32
Polubienia
5
Ocena
0
P
Printablesmbarton98

Delta Faucet Cartridge Bonnet nut 1 5/16in socket 3/8in drive

I was replacing the Delta faucet cartridge for our single handle kitchen sink and the instructions specified a 1-5/16 six point socket. I tried to buy one at Lowes and Home Depot stores locally, but they did not have that size. I then…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesWilliam Alger

1.8in 7 Segment Display Enclosure

A 1.8in 7 segment display enclosure for your gear indicator for your sim rig

Pobrania
31
Polubienia
5
Ocena
0
P
Printables2Beeried

Waveshare 2.8in Round Screen Mount for Delonghi ECP Machines

Waveshare 2.8in round screen mount to mount it to the Delonghi ECP3630 Espresso machine. Should also fit on other Delonghi ECP Machines, but unsure. Print is broken into 3 parts for ease of printing I print the Outer adapter on it's face…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesRandom Letter

3/8in female to 1/4in male socket adapter

This is a 3/8in to 1/4in socket adapter that can be used for low torque applications. I printed this with 4 perimeters, 100% infill, and a .2mm layer height to try and make it as strong as possible. However, it can still break if too much…

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesJesse Barlow

Waveshare ESP32-S3 1.8inch Knob holder

A holder for the Waveshare ESP32-S3 1.8inch Knob - https://amzn.to/4gCaa6p I installed a flight tracker on it with ADS-B I printed in ASA just because I have a lot of it. 25% infil No supports needed

Pobrania
29
Polubienia
3
Ocena
5
P
Printablesdnl42

William Bounds HM 8in Professional Pepper Mill Parts

The William Bounds, Ltd. HM 8in Professional Pepper Mill is a wonderful device. However, after a number of years of excellent service, the plastic core within the stainless steel cap fractured, rendering the mill difficult to use. The…

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesGrunkle_Bitcoin

Mic Holder for a 3/8in rebar on a concrete plate.

Made some mic stands out of 3/8in rebar with a concrete plate. These are the mic holder assembly for a Monoprice pro mic

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesRacknos

Extended battery cover and bumper case for Waveshare ESP32-S3 1.8inch amoled

Welcome, my conventional non-conventional visitors! (RIP Tim Curry <3) Here's my 3D-printable mod to fit a larger battery pack into this Waveshare kit. It reuses the stock screws to secure the board and route the connector into the…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesGillicutty

6in AC Hose to 8in VEVOR Fan

Allows direct connection of 6in AC hose to 8in VEVOR inline fan. Small dia side fits inside the AC hose, large side fits outside the rim of the fan intake. Designed to friction fit to allow quick connection. OnShape Link This is part of…

Pobrania
24
Polubienia
3
Ocena
0
P
PrintablesEsZett

Sovol SV08 8inch Tablet Holder

I want to attach a cheap 8 inch Tablet to my SV08 Use 2x M3x16 screws to attach I used 4 perimeters and 20% infill, less will work for sure.

Pobrania
24
Polubienia
9
Ocena
5
P
PrintablesScorch1262

Halterung Uni Hub 8in1 MK2

passend für: https://www.amazon.de/gp/product/B081YGDBG7/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1 Category: Gadgets

Pobrania
22
Polubienia
2
Ocena
0
P

Ryobi Metric 3/8in. Socket Set Pegboard Mount

Simple, easy print. No supports required. The pegs print separately and are simply glued in the slot with your favorite adhesive. I used CA glue and activator and it has held up beautifully. The letters are raised at the top so you can…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesPugPotatoBody

Waveshare 7.8inch E-Paper E-Ink Display w/ hdmi

Not a great design for compactness. Still working on the wiring and alignment. I'm hoping everything can fit with the back lid on. Only challenges here, no promises. Update since first post. The cable connector mount has been repositioned…

Pobrania
20
Polubienia
3
Ocena
0
P

Ryobi SAE 3/8in. Socket Set Pegboard Mount

Simple, easy print. No supports required. The pegs print separately and are simply glued in the slot with your favorite adhesive. I used CA glue and activator and it has held up beautifully. The letters are raised at the top so you can…

Pobrania
20
Polubienia
3
Ocena
0
P
Printablestanmaychhatbar

TTGO TS 1.8in Cover

The TTGO TS has a built-in MPU9250, a display and a BMS. I made this to house it and mount it to my car so I can log data in a small form factor. https://github.com/TanmayChhatbar/car_datalogger

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesCarlosFpvMx

CALIPER DRO FOR 8IN JR SOUTHBEND LATHE

Caliper base for use as a DRO (Digital Readout). The base comes in two parts and requires no additional supports. You will need two M3x10 screws, two M3 nuts, and eleven 10x2mm round neodymium magnets. You will need to modify the caliper…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesk

Mitutoyo 8in/200mm Caliper Stand with Attachment Bolt

A stand for 8in and/or 200mm Mitutoyo digital calipers. It has an added hole sized for a 10-32, 10-24, or an M5x.8 flathead screw. I recommend using the screw to clamp the parts together while your glue of choice sets up rather than…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesSogidaned

Beyma 8ag/n 8inch Protection Cover

Protection cover for 8 inch loudspeaker. two 6 mm x 215 mm stainless steel rods needed Category: Music

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesCodeMinion

Nendoroid Display Case 18in x 12in x 12in

Assembly Instructions: Link: https://bit.ly/kirby-nendoroid Extras: 24 x D3H1 Magnets ( https://www.kjmagnetics.com/d3h1-neodymium-disc-magnet ) 48 x D32-N52 Magnets ( https://www.kjmagnetics.com/d32-n52-neodymium-disc-magnet ) 2 x 12in…

Pobrania
15
Polubienia
7
Ocena
0
P
PrintablesGraylag

Rod joint for 120cm/48in acrobatic kite

Replacement rod joint for this cheap 120cm/48in acrobatic kite. Original joints are easy to lose, so here is replacement.

Pobrania
15
Polubienia
6
Ocena
0
P
PrintablesSquire

3/8in Grosgrain to 1/16in Shock Cord Hook

Use a decent PLA or PETG for this and it should be able to handle reasonably small loads, such as holding lids down or the like. No guarantees as to heavy loads though.

Pobrania
14
Polubienia
3
Ocena
0
P
Printablesdriveslow48

3/8in female to 1/4in male socket adapter

Made in Fusion 360 with a 10mm opening and 5mm pin to leave some gaps. F3d file available. Print sideways for better torque strength.

Pobrania
14
Polubienia
1
Ocena
0
P
Printablestanmaychhatbar

TTGO TS 1.8in Cover w/ GPS

The TTGO TS has a built-in MPU9250, a display and a BMS. I made this to house it and mount it to my car so I can log data while driving autocross. https://github.com/TanmayChhatbar/car_datalogger

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesEliVandivier

7/8in Dowel Rod Bracket/Holder

A bracket for a .875" diameter dowel rod. The model is fully constrained in fusion 360 so you can easily edit the parameters. I made the diameter slightly larger for the holder part of it to account for print variation since I am using a…

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesSolusViator441

Gridfinity (Metric) 3/8in Socket Holder 2x3x3u

Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2x3x3u Gridfinity Socket Holder for the Metric 3/8in Sockets and Wobble Extension from the - Harbor…

Pobrania
13
Polubienia
3
Ocena
0