Wyniki wyszukiwania: ad5m

Sortowanie

493 modeli

P
PrintablesXTRUD3D

Flashforge Adventurer 5M Drag Chain (AD5M)

I remixed the drag chain by INQUE and cut off the spool holder portion because I use a side mounted spool holder and don't have a use nor the space for the vertical spool holder. I also added in the drag chain termination part by Doug…

Pobrania
10 227
Polubienia
785
Ocena
5

Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…

Pobrania
8825
Polubienia
858
Ocena
4,82

New v3.0 of top riser set for Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…

Pobrania
7567
Polubienia
796
Ocena
4,96

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Pobrania
6537
Polubienia
644
Ocena
4,6

Flashforge Adventurer 5M (AD5M) Filament Cutter - compatible with DIY enclosure when using my Design8Studio drag chain termination v1.1

CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…

Pobrania
5921
Polubienia
973
Ocena
4,74

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
4939
Polubienia
451
Ocena
4,96

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

Pobrania
4511
Polubienia
526
Ocena
4,88

[Option 1 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 1 of 3 — Clone of the stock factory clip PLA. Print as oriented. I used 0.2 mm layer height on 0.4 mm nozzle.…

Pobrania
3715
Polubienia
520
Ocena
4,89
P
PrintablesJake

Flashforge AD5M Anti-Vibration Feet

Anti Vibration feet for Flashforge Adventurer 5m. The rear feet sit at a 45 degree angle to be able to fit. These make the printer feel and sound a lot more solid and help reduce vibrations tremendously. I'm not sure if it is necessary…

Pobrania
3234
Polubienia
489
Ocena
4,8
P
PrintablesBoldPilot

AD5M Stylus Pen

Stylus pen similar to stock file on AD5M. Unlike the stock file, you can use your own settings to print. Tried to match the stock design as much as possible, so it can be used with most of the available stylus holder designs for the stock…

Pobrania
3187
Polubienia
175
Ocena
4,95

Flashforge Adventurer 5M (AD5M) Nozzles Box and Accessories Box - two styles to choose from, including sets that attach to back of printer v1.2

VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…

Pobrania
3128
Polubienia
387
Ocena
4,95
P
Printablesschreider

Filament Cutter 45° for Flashforge Adventurer 5M (AD5M) Printhead

The rest of the files can be found → HERE ←, as well as a description of the necessary parts. The model is put directly on the filament slot on the printhead. Therefore, to change the filament, you will no longer need to remove the tube…

Pobrania
2753
Polubienia
483
Ocena
5

(1 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
2533
Polubienia
207
Ocena
5
P
PrintablesJakeP3D

AD5M Enclosure Shelf

A shelf to hold 5M printer essentials. Sized to fit the glue bottle that comes with the printer as well as other items. For the center mounting bolt be sure to use an M4 jam nut for clearance to print head. It gets very close to the frame.

Pobrania
2503
Polubienia
365
Ocena
4,73

Flashforge Adventurer 5M (AD5M) Side Cutter Mount v1.0

This short explainer video is less than 1 minute long. Side Cutter Mount adapted for use on the Flashforge Adventurer 5M (AD5M) with the DIY printed enclosure. One model suits the front right or left, while another model suits the back…

Pobrania
2413
Polubienia
295
Ocena
5

Flashforge AD5M Enclosure Hinge - remixed to be easier to open and use (print-in-place Door Hinge) v1

NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…

Pobrania
2397
Polubienia
153
Ocena
4,92
P
PrintablesCHroniker1

Flashforge Adventurer 5M (AD5M) / Pro Cover

Printed with ASA and 0.4 nozzle with 0.2 Layer height.

Pobrania
2330
Polubienia
342
Ocena
4,89
P

Flashforge adventurer 5m (ad5m) enclosure upgrade HSW

I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…

Pobrania
2291
Polubienia
406
Ocena
5
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) Hot end retainer with fan duct (silencer)

**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…

Pobrania
2154
Polubienia
258
Ocena
4,88
P
PrintablesTyler Larson

FlashForge AD5M Build Plate Handle (NO HARDWARE)

Easy build plate handle for aftermarket AD5M plates. I recommend printing in PETG or better. Presses together with pliers. Glue is optional. It is a snug fit. UPDATE 1/18/25 Slimmed down the profile some for v2.

Pobrania
2101
Polubienia
187
Ocena
4,82
P
Printablesdark256

Flashforge Adventurer 5M (AD5M) / Pro Cover

Printed with PLA and 0.4 nozzle with 0.19 Layer height. Nail polish was used for the coloring. Smear the surface with petroleum jelly, pour the nail polish, and wipe off with a cotton disk. Mr_medvedko dushniak & diatel

Pobrania
1965
Polubienia
259
Ocena
5
P
Printablesschreider

Quietmode! Flashforge Adventurer 5M (AD5M) Back Panel w/ 120mm & 4010 fan

Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…

Pobrania
1900
Polubienia
575
Ocena
5
P
Printableskbnb

FlashForge Adventurer 5M AD5M Hinged print-in-place lid stand

Hinged lid stand for Flashforge Adventurer 5M (AD5M) 3d printer. Works with manufacturers' DIY enclosure - just unscrew screws and screw them back with this stand. When stand is not needed, it just laying flat on the back side of a lid.…

Pobrania
1839
Polubienia
249
Ocena
4,96

Flashforge Adventurer 5M (AD5M) Printed Camera Mounts (two to choose from) v1.0

Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…

Pobrania
1706
Polubienia
254
Ocena
5

Flashforge AD5M Enclosure Hinge - remix - easier to open, better door placement (print-in-place Door Hinge) v2

NEW VERSION v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the added…

Pobrania
1660
Polubienia
150
Ocena
4,88
P
PrintablesMr F

Flash forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification

Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…

Pobrania
1458
Polubienia
160
Ocena
5

Flashforge Adventurer 5M (AD5M) LED Light Bars mod accessories - mounts for 5050 LED (2 strips per mount bar) v1.0

These are printed accessories for adding LED light bars to the Flashforge Adventurer 5 (AD5M) printer. Printing info: Print as oriented No need of supports. The LED “mount” bars were printed on the AD5M. The longer parts have to be…

Pobrania
1456
Polubienia
242
Ocena
5

Flashforge Adventurer 5M (AD5M) - Retrofit Minimal Enclosure onto OG DIY Enclosure - get your touch screen back on metal frame v1.0

Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…

Pobrania
1440
Polubienia
161
Ocena
4,89
P
PrintablesOssie P.

Version 2.1 With Full PTFE Guide - Drag Chain Kit - Flashforge Adventurer 5M - AD5M

Version 2.1 - added “V2.1Guide.STL” Added "Adapter" Model with M3 Thread - Brass insert not needed. Original “Adapter” Model was renamed with “AdapterM3BrassInserts” as it uses M3 Brass Insert.

Pobrania
1338
Polubienia
205
Ocena
4,8
P
PrintablesMinamir

Flashforge Adventurer 5M (AD5M) Lid Stand

Stand for FF AD5M acrylic top enclosure lid. Two versions included, Front , and Back or Side . Little over 30mm opening at lid edge. Print orientation as in stl files (horizontal), might be useful to increase number of walls/perimeter…

Pobrania
1279
Polubienia
205
Ocena
5

(3 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
1261
Polubienia
85
Ocena
5
P

AD5M minimal enclosure REMIX

Overview: This is suitable for those who purchased the original DIY enclosure kit from Flashforge and are looking for a more convenient and practical version of the printed parts. The PETG plastic weight is approximately 600 grams for the…

Pobrania
1208
Polubienia
192
Ocena
4
P
PrintablesFelipe Gonzalez

AD5M Stand and Drawer Tool Organizer.

Hey everyone! I’m excited to share that I’m new to the 3D printing world! I thought the best way to start was by sketching, modeling, and printing. I’ve been using the Adventurer 5M, a fantastic machine. So far, I’ve printed some fun toys…

Pobrania
1170
Polubienia
207
Ocena
4,5
P
PrintablesDavid McIntosh

Flashforge Adventurer 5M (AD5M) - drag chain termination at hotend - Smaller Profile Remix

Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.

Pobrania
1138
Polubienia
114
Ocena
5
P
PrintablesAndrew
Pobrania
1088
Polubienia
144
Ocena
4,89
P
PrintablesSniffynose

Flashforge Adventurer 5M (AD5M) LED Mod.

After going over my enclosure build, I noticed in the original Flash Forge Step files, that there was 2 screw mounts sticking out from the front upper assembly, then I noticed when you buy the enclosure kit, it actually has some extra…

Pobrania
1041
Polubienia
192
Ocena
5
P
PrintablesCKAT

Flashforge Adventurer 5M Drag Chain Holder (AD5M)

Remix of drag chain by INQUE. For those who don't want to use spool holder.

Pobrania
1037
Polubienia
102
Ocena
5
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Enclosure Mod - No Logo

Just removed the logo from the enclosure part, so you can easily add your own!

Pobrania
952
Polubienia
161
Ocena
5
P
PrintablesFrenchyAU

Flashforge AD5M screen stylus holder

16/9/24: Added a second variant designed to work with an AD5M with an enclosure kit, simply replace one of the side frame bolts with a longer screw to attach this designed this simple holder to hold my Flashforge AD5Ms stylus (the one…

Pobrania
923
Polubienia
116
Ocena
5
P
PrintablesLetItRipMT

AD5M Rear Bed Cover/ Noise Reducer

Cover and noise reducer for the rear of the AD5M bed. I saw there are covers from other makers for the side mounts, and a rear plate for the AD5X, but not the AD5M or 5M Pro. Printed in PETG. Pops into place. Assume it will work well as I…

Pobrania
874
Polubienia
91
Ocena
4,86
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Cable Channel Covers

As I'm rethinking my printer setup, I wanted to cover up the ugly wires leading to the LCD and switches that I retrofitted to the case. Hides them pretty nicely. Fits on both sides of the case! For printing, just lay it on the bed…

Pobrania
869
Polubienia
178
Ocena
4,86
P
PrintablesLuigisvc

FlashForge AD5M hotend fan silencer

This component is specifically designed to mitigate the high-pitched noise generated by the hotend fan in the FF AD5M, enhancing the overall acoustic comfort of the printing environment. The small fan inside the hotend due to its high…

Pobrania
866
Polubienia
81
Ocena
4,43
P
PrintablesKMGMakes

AD5X/AD5M Vent Cover With Cutout for Temp/Moisture Sensor

NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc) A Vent cover for the AD5X/AD5M I…

Pobrania
818
Polubienia
184
Ocena
4,86
P
PrintablesKuangming Qin

Flashforge AD5M Minimal Enclosure

FF AD5M minimal enclousure; Compatible with OG enclosure kit, no modification required I also added thermal insulation on two side panels. Chamber temp reaches 100F when printing PETG @ 75C / 245C Printed parts using 0.6mm nozzle w PETG @…

Pobrania
801
Polubienia
88
Ocena
3,5
P
PrintablesCrimson Caboose

Top loading filament spool holder for Flashforge Adventurer 5M (AD5M)

Update Aug 12, 2025: Added a clip that prevents the spool holder from wobbling when not loaded. V2: Has arm that can be attached to guide filament and prevent it from unwrapping. A spool holder for the AD5M that feeds filament from the…

Pobrania
788
Polubienia
89
Ocena
4,25
P
PrintablesRobert Hall

Flashforge AD5X/AD5M enclosure bottom trim

Noticed that whenever you print the enclosure your alway left with the bottom part below the door being black and not matching the rest….. So I gave quickly designed a bottom trim to go over it, I did recess some holes into it for magnets…

Pobrania
774
Polubienia
153
Ocena
5
P
PrintablesDzung Vu

LED Strip holder for Flashforge AD5X/AD5M

Holder for a cheap LED Strip on Amazon for Flashforge AD5X/AD5M. Link to the strip: https://www.amazon.com/dp/B0F5G5TFC2 The model remixed previous design with additional details: Add a hole at the end of the holder to clear the…

Pobrania
773
Polubienia
87
Ocena
5
P
PrintablesSteve Eglon

AD5X/AD5M/AD5M Pro Bowden Clip and Improved Fan Retainer

The AD5X is a great machine but like any there are always little niggles which can be improved upon. The Bowden clip which retains the 4 in 1 filament feed tube is small and fiddly to remove. The model attached is longer and still fits…

Pobrania
772
Polubienia
86
Ocena
5
P
PrintablesViking3DK

Flashforge AD5M & AD5X covers 27/10/26

One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…

Pobrania
752
Polubienia
156
Ocena
4,8
P
PrintablesJordan Andersen

Triangular Stylus With Magnets for Flashforge AD5M Adventurer 5M

Stylus that is similar to the one loaded onto the flashforge 5M / AD5M from the factory. Has two spots for magnets. Same magnets that are in the enclosure kit. Printed with default settings, but add brim, and no supports.

Pobrania
725
Polubienia
74
Ocena
5

[Option 2 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with EXTENDED HANDLE

This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. OPTION 2 of 3 — EXTENDED HANDLE — Easier to use, both for removal and installation, because of having more to grab…

Pobrania
709
Polubienia
118
Ocena
5

Flashforge AD5M Door Handle - remixed to print without need of supports

Flashforge AD5M Door Handle - remixed to print without supports needed Only change is to angle the existing overhang so the part can be printed without need of supports This is regarding the DIY enclosure upgrade . HEADSUP 1: I just…

Pobrania
698
Polubienia
60
Ocena
5
P
PrintablesImagiForge3D

Flashforge Adventurer 5M (AD5M) - filament sensor support - correct direction

Once I printed XTRUD3D 's chain for the Flashforge Adventurer M5 I realized that the filament sensor could not work in the correct way. So I created this additional holder for the filament sensor. Placed vertically, the sensor maintains…

Pobrania
664
Polubienia
53
Ocena
0
P
PrintablesenragedByte

Revised Flashforge Adventurer 5M (AD5M) Enclosure Orca Slicer Project

Revised version of the Flashforge Adventurer 5M Orca Slicer project. I am using Orca Slicer version 2.1.1 at this time. Changes: . Reoriented a number of the plates for printability. . 15% Gyroid infill. . Mouse ears added for corners…

Pobrania
652
Polubienia
53
Ocena
0
P
PrintablesMiX3R

Adventurer 5m (AD5M) anti-backlash spacers (TPU only!)

UPD 13.05.24: Models of X-spacers have been corrected, Y-spacers have been added. Spacers in the X and Y axis are installed between the pressure plates and bushings, in case you want to get rid of the play that is felt if you shake the…

Pobrania
650
Polubienia
100
Ocena
0
P
PrintablesLysander

3X 235mm Build Plate Holder for FlashForge AD5M/X

Designed for use with PLA filament, 4.5 hour print

Pobrania
636
Polubienia
69
Ocena
5
P
PrintablesLloyd Summers

Flashforge AD5M & AD5X | Slim Fan Clip / Magnetic Clip - Slim

I strongly recommend printing this early on... works with the alternative fan grill covers, minimizes blocking of air flow. Helps prevent the cover on the AD5X from falling off. It is intended to be a simple lightweight clip, that is easy…

Pobrania
620
Polubienia
71
Ocena
5

(4 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
618
Polubienia
33
Ocena
5
P
PrintablesCHroniker1

Nozzle Wiper for Flashforge Adventurer 5M (AD5M)

This nozzle wiper reliably cleans the nozzle of your Flashforge Adventurer 5M / pro before each printing process. You can easily attach the BambuLab A1 Mini Nozzle Wiper to the printed holder. Please be aware, that the wiper must be…

Pobrania
615
Polubienia
190
Ocena
5
P
PrintablesTyler Spurgeon

Flashforge AD5M Enclosure Hinge

Modified hinge for the Flashforge Adventurer 5M Modified to accept a 5x25mm pin or bolt/screw.

Pobrania
610
Polubienia
67
Ocena
5
P
PrintablesKanonenkoenig

Flashforge AD5M Dragchain riser

Allows you to use a Filament-cutter with the Enclosure Upgrade Kit. Print at least with PETG. Supports needed.

Pobrania
591
Polubienia
117
Ocena
5
P
PrintablesBoldPilot

AD5M JUUPINE Build Plate Handle

AD5M Build Plate Handle for JUUPINE 235x235mm Plate Build Plate Link: https://www.amazon.com/dp/B0D1G7XTW5? Update 4/19/25: Version2 has thicker outside pins and a groove for a better and stronger fit. Print the male part on its side with…

Pobrania
587
Polubienia
69
Ocena
5

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.1)

NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…

Pobrania
583
Polubienia
39
Ocena
4,67

(2 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Pobrania
577
Polubienia
39
Ocena
5

Flashforge Adventurer 5M (AD5M) LED mod accessory - buck converter MOUNT for inside back of printer (24v -> 12v inline, etc) v1.0

NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…

Pobrania
575
Polubienia
129
Ocena
5
P
PrintablesTinkering Poko

Flashforge AD5M\pro nozzle brush using Bambulab A1 silicone brush

[Changelog MK2] 20251103 User @CoreyRogers_489647 reported interference with bed issue. Lightly remix to increase clearance. UNTESTED. ----------------------------------------------------------------------------------------- As suggested…

Pobrania
574
Polubienia
222
Ocena
5
P
Printablesdarthkotor

AD5M Flashforge Lid Hinge

I wasn't happy with the other lid hinges available online, so I made this one. Has a few cute features. Uses standard filament as the axle. Has a stopper on the top so the hinge catches itself and stays upright. I attached mine to the…

Pobrania
574
Polubienia
108
Ocena
4,83
P
PrintablesTlochi

AD5M Glass Bed Conversion Clip

Place glass directly on magnetic build surface. Place clips approximately where shown. Print using ABS/ASA, 2 wall loops 0% infill. Place top flange on glass first, at an angle, then push the bottom flange under the bed. To remove, press…

Pobrania
562
Polubienia
82
Ocena
5
P
PrintablesIL'YAS

Project ILYASmod - Enclosure/Holder LM/HOT BOX for AD5m

Аuthor modification Project ILYASmod for 3D printer FF AD5m Update: Enclosure set: 0.5ver. (including base set and mods) Assembly instructions and other information: https://t.me/ILYAS_mod_AD5m Project ILYASmod - Enclosure (basic…

Pobrania
552
Polubienia
122
Ocena
0
P
PrintablesAsk Lysdahl

Prusa Slicer Flashforge AD5M Forge-X config bundle

Install Forge-X on your printer and set it up: https://github.com/DrA1ex/ff5m Import the config bundle into Prusa Slicer and add the build plate STL to the printer profile.

Pobrania
551
Polubienia
14
Ocena
5
P
PrintablesFlMtbSteve

Remix of Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure

This is pretty much the 3D build I used to complete my FlashForge DIY enclosure kit. I used Orca Slicer 2.2.0 for the slicing and muddled my way through the free consumer version of Autodesk Fusion for the design mods. For parts I created…

Pobrania
542
Polubienia
57
Ocena
5
P
PrintablesREDBEARD-PRINTS

Flashforge AD5M Base / Riser with or without Drawers! Fits perfectly

Full Base / Riser with Drawers. Print in PLA or PETG 0,2 - 0,24 Layer Hight - 0,4 nozzle Min. 20% Gyroid Infill for Strenght i build with 35% infill. Part 7 only needed if u dont want drawers, then just print that. Fits the AD5M Like a…

Pobrania
539
Polubienia
102
Ocena
5
P
PrintablesBluPhant

Forge-X branded shelf for AD5M Flashforge Adventurer 5M Printer

This shelf is designed to replace the near-worthless trim piece that is part of the offical Flashforge enclosure kit. As with the model this was remixed from, it has a hole in the center for a M4 bolt/nut to hold it firmly in place. This…

Pobrania
528
Polubienia
84
Ocena
5
P
PrintablesFrenchyAU

Flashforge AD5M shelf with glue slot

added a small circle slot onto enclosure shelf to hold the included glue stick vertical to allow for more pieces to be placed on the shelf

Pobrania
521
Polubienia
71
Ocena
5
P
Printablessanta(lemuroff)

Spool holder Flashforge Adventurer 5M AD5M

Основная фишка в том, что для замены катушки она поднимается вверх по направляющим кронштейна вместе с бобиной. Саму бобину снимать не надо, т.к. высота кронштейна увеличена. Кронштейн состоит из двух частей для удобства печати на поле…

Pobrania
514
Polubienia
75
Ocena
0
P
Printablesisod

AD5M EasyKit Adventurer 5m

I remixed the flashforge diy kit because I don't intend to put an enclosure on the ad5m. Here is a kit to customize your printer. NO HARDWARE NEEDED :) Please note that the project is not complete, the back & more parts remains to be…

Pobrania
502
Polubienia
85
Ocena
5
P
PrintablesCKAT

Flashforge Adventurer 5M LED Switch Holder (AD5M)

Threaded Insert M4 Nut. Switch holder on left side

Pobrania
492
Polubienia
110
Ocena
0
P
Printables8660 -

Flashforge Adventurer 5M (AD5M) Filament Cutter

Flashforge Adventurer 5M (AD5M) Filament Cutter

Pobrania
492
Polubienia
99
Ocena
5
P
PrintablesAlan Chan

AD5M LED Mount

There're two unused screw holes on the official enclosure risers. I've created a mount for mounting the 230x17x1.75mm LED strip. You need two ST2.9x9.5 screws that come with the enclosure kit. Screw two mounts on the risers first , then…

Pobrania
482
Polubienia
52
Ocena
5
P
PrintablesTadeáš Barna

Flashforge AD5M top vent cover

PETG, 3 walls, 100% infill, the part is originally upside down so flip it in the slicer to print correctly

Pobrania
455
Polubienia
77
Ocena
5
P
Printables6Track

FlashForge AD5M Screen Cover (with USB Support)

Screen cover for Flashforge Adventurer 5M with USB Support. With high speed filament on a Flashforge AD5M, I print this model in 25 minutes. To get a good result, print with a minimum of 0.1mm/0.2mm layer height, and with a minimum of 3…

Pobrania
453
Polubienia
57
Ocena
4,89
P
Printablesmakko

Flashforge Adventurer 5M (AD5M) Enclosure Top

I wanted a slimmer enclosure top to the original one, but wasn't fully happy with the looks of the (very good, i should add!) minimal enclosure top made by the talented Doug of @design8studio . So i made another one. Yes i know, i'm very…

Pobrania
442
Polubienia
94
Ocena
0
P
PrintablesSnakeFist

Flashforge Adventurer 5M (AD5M) Rocker Switch Holder

Uses 2x M4x14mm bolts and 2x M4 nuts to attach it to the case frame. Works with the AD5M enclosure! Update: I added a heat-set insert version for M4*8*6 inserts, aswell as the mirrored versions so you can mount them on either side of the…

Pobrania
437
Polubienia
96
Ocena
5
P
PrintablesREDBEARD-PRINTS

OFFICIAL FLASHFORGE Filter cover for Adventurer 5M Series ( AD5M , AD5X , AD5 Pro )

Printables Upload of the official flashforge adenturer 5m filter cover filtes. Suggest to print in PTEG / ABS because auf Temps in buildroom. but i think PLA will work too… 0,2 Res, 0,4 nozzle, ( i build with 100% infill ) ABS All Rights…

Pobrania
435
Polubienia
99
Ocena
4,83
P
PrintablesAirjohan71 Dus

Cache sur coté plateau Flasforge ad5M

Cache pour flashforge AD 5M

Pobrania
433
Polubienia
59
Ocena
5
P
Printablesddac3150

Holder Flat Drag Chain Flashforge Adventurer 5M (AD5M)

Holder drag chain Flashforge Adventure 5m petg 0,2

Pobrania
426
Polubienia
40
Ocena
5
P

ad5m spool holder

Check out the original designers listings for extra information. Doug Joseph (design8studio) has a great explanation of the spool modifications and readjustments he made. This spool holder fits perfectly the remix of the flashforge ad5m…

Pobrania
406
Polubienia
86
Ocena
4,5
P
PrintablesDawoox

Rugged Box Nozzle Holder AD5M

Hardware needed: - M3x25 x6 That's it! Have fun printing

Pobrania
404
Polubienia
87
Ocena
5
P
Printables6Track

FlashForge AD5M Screen Cover (with Logo + USB Support)

Screen cover for Flashforge Adventurer 5M with Logo and USB Support. Print with support and make overhang printable. Please…Print it, Share it and Like it. PS: Help me get a Prusa MK3 by clicking like and downloading the model

Pobrania
403
Polubienia
54
Ocena
5
P
PrintablesTohaman

FlashForge AD5M Build Plate Handle

Build plate handle for AD5M plate like https://ali.click/02inse . I recommend printing from ABS, 0.4 nozzle, 0.2 layer height. Bottom part with ironing. Glue is optional.

Pobrania
401
Polubienia
38
Ocena
5
P
Printablesmakko

Flashforge Adventurer 5M (AD5M) Lid hinge

Simple hinge so you won't have to fiddle with the lid anymore. Print in place, no supports needed. Takes 4 PC fan screws per hinge. You need to drill 5mm holes to the lid. Alternatively you can use strong double-sided tape. CAUTION: Be…

Pobrania
399
Polubienia
76
Ocena
5
P
Printablesbraxtonz

Flashforge Adventurer 5M (AD5M) Wire Clips

I was in need of basic cable management after installing Sniffynose 's AD5M LED Mod , for the dual 24V 22AWG wire I used for the LED strip / lightbar. The clips simply pinch the thin frame extrusions and hole the wires against the…

Pobrania
393
Polubienia
82
Ocena
5
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) - Blink Mini 1 Camera Mount

Welcome, welcome! Here is a camera mount for the Blink Mini 1 onto our AD5M. I modified a guard plate from the minimal enclosure since it's what's on my printer. If you have no enclosure or have the minimal then this can work for you.…

Pobrania
384
Polubienia
77
Ocena
4,75
P
PrintablesPaul Mironov

FF AD5m K1-hotend

Hi all! I would like to present to you the integration of the Creality K1 3D printer hotend into the FlashForge AD5m

Pobrania
382
Polubienia
103
Ocena
5
P
PrintablesPolyGoneRogue

Flashforge Adventurer 5M (AD5M) Auxiliary Fan Base (Thingiverse remix)

After enclosing my AD5M, I wanted to add a fan for various reasons which we all have. Anyway, I found a fan duct I liked because it fit snuggly in the fan I purchased specifically for the AD5M. The wiring was correct and everything fit…

Pobrania
378
Polubienia
169
Ocena
5

Flashforge AD5M Enclosure Hinge & Handle FOR MINIMAL ENCLOSURE - remixed to be easier to open and use (print-in-place Door Hinge) v3

This v3 of the AD5M door hinge for DIY enclosure is expressly for the Minimal enclosure and its remixes. It repositions the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as keeping…

Pobrania
376
Polubienia
44
Ocena
5
P
PrintablesJakeP3D

AD5M/PRO Toolhead Duct

Replacement toolhead duct for Flashforge adventurer 5M/ 5M Pro. Has beveled exterior surfaces for better printability and aesthetics. There are both normal and mouse ear versions. No support needed but does need to be able to bridge the…

Pobrania
375
Polubienia
98
Ocena
5
P
PrintablesRaym00n

FlashForge Adventurer 5m (AD5M) Screen Surround

Hi there! Just a fun screen surround I mixed. Fits snug, includes a wizard to accompany you on your journey =). <3 to Ninomalbinho and isod

Pobrania
372
Polubienia
51
Ocena
5
P
Printablesmakko

FlashForge Adventurer 5M (AD5M) cooling ducts

Yet another cooling duct for AD5M. Fairly lightweight, under 20 grams printed with the modifier from PET-CF. The first model is tested only with AliExpress aftermarket nozzle, the 2nd one is for Original nozzle and Phaetus Conch. Modifier…

Pobrania
369
Polubienia
79
Ocena
5
P
PrintablesBen Engelen

Adventurer 5M (AD5M) with drag chain connector.

I started using a filemant cutter (Really usefull) https://www.printables.com/model/844462 And needed more room with the dragchain. Print using Tree supports, I used Polymaker Polylite ASA for strength.

Pobrania
365
Polubienia
55
Ocena
0