34 480 modeli
This adapter allows you to use Meta Quest 2 head straps on the Quest 3. Instructions: Download under ‘model files’ and print with supports. Enjoy Haydn Bao Design notes: From v4 to v5, the geometry updates are minor. There's just a few…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa released the printable parts for MK3s+ and the fan shroud is much better than the stock one of the Mk3s, so, for everyone who don't want to fully upgrade from Mk3s to Mk3s+ but still would like better cooling, I cut the second…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Simple tool for lubricating LM8UU bearings. Print instructions New version! We found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Update V2: I completely rebuilt the Duplo connector. I changed three things of the original "Minimalist Duplo - Brio, IKEA, Wooden Train adapter" with Tinkercad in order to fit my needs: I reduced the inside height of the Duplo connector…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
SSD or HDD adapter from 3.5" to 2.5" drive. You are going to need 4 countersunk screw M3x6mm for mounting drive to the 3D print If your drive needs the connectors to be in the same position as those on a 3.5-inch drive, it won't be…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena jednego wariantu
Hi guys, after the disaster of ordering the M2-M3 BoboVR conversion kit today I decided to do a quick and dirty remix this great Quest 3 to Quest 2 Head Strap adapter by HB. (Many Thanks) It's far from perfect. USB cable has to go in back…
Wydruk około 1,79 €–2,18 € nettoWstępna wycena jednego wariantu
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows you to use a 3.5 in HDD hot-swap bay with your more popular 2.5 in SSDs. ****Edit*** I added two new files v2, I rounded off the edges I think it looks nicer. ****Edit*** I've added a Riser so you can easily use the more readily…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
simple part to hold two IKEA-Lack tables stacked over one another. No bolting necessary. Print instructions You will need 4 for a stable stack. I print was done in PET-G, 0,2mm layer on a MK3s. Print works well without support. Update…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Had to print using 2mm raft to stick on build plate. Print with thicker side of the model upward shown in photo, no supports needed. May require some strands to be cleaned up when done printing. You can find adapters on Amazon but why not…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
I really love the Smartphone cases from Quad-Lock and used them allready for the past few years. The only Problem is the Price and the Varaities of the Quad-Lock mounts. So I just 3d-printed my own ;-) The here provided mount perfectly…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena jednego wariantu
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,30 €–5,26 € nettoWstępna wycena jednego wariantu
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I could not find the right adapter. That's why I designed this for my "be quiet" case. I tried to keep it as simple as possible. It should work for other 3.5 "bays of course. Print instructions Category: Computer Print Settings Printer…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
My obsession with IKEA Skadis made me want to add one to the side of the Kallax I have in my office. So I designed some holders to achieve just that. They are mounted to the two top screws of the Kallax and have slots for an M4 nut in…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A universal adapter to hold a Parkside PAP 20 A1 (Lidl) battery. You can add holes in Prusaslicer 2.4+ or in any other software to connect it to the machine. No supports needed. Feel free to tell me for improvements.
Wydruk około 2,88 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Joe3020 fitted an adapter for 10MM bearings for Overture cardboard spool, I remixed it to work on most spool holders. This adapter to insert into certain cardboard spools to reduce the amount of cardboard dust from spinning against the…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Based on https://www.thingiverse.com/thing:10475 Remodelled it from scratch using FreeCAD so it wasn't too small. Use a lot of perimeters while printing (I used 6). You can find the FreeCAD file at…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
This is my take on a hard drive adapter to allow mounting 3.5" drives to 5.25" bays. This includes front mounting points for a 120mm intake fan if desired (usable when installed in 3 adjacent bays).
Wydruk około 3,88 €–4,74 € nettoWstępna wycena jednego wariantu
This is a 3D printable 1/4" to 3/8" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 3/8" to 1/4” adapter here. Important Update: I’ve created a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D printable 3/8" to 1/4" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 1/4” to 3/8" adapter here. Important Update: I’ve created a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Remix of design found here: https://www.thingiverse.com/thing:1668774 I added some screw sockets, 3mm thickness and moved the place for PSU to the bottom, so the PSU lies flat on the case. Tested with SilverStone TX500 and TX700. PSU fan…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
When dealing with lots of spools and especially with refill filaments, sooner or later you will find yourself with a tangled spool which can only be saved by respooling the filament. So I was looking for a quick and easy solution to…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Uses the original screws to attach the original spool holder to the adapter. Needs two extra M5 (minimum 15mm long) screws for the frame attachment. All holes have a diameter that enables screwing the screws directly, or using a tap…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Cable management clip for the Apple 70W USB-C Power Adapter. Based on the 67W adapter model from Petr Albrecht (the V2 model), I made a new design to fit the smaller 70W adapter (28.6x65mm). The adapter suits the Apple MacBook Air with M2…
Wydruk około 0,40 €–0,48 € nettoWstępna wycena jednego wariantu
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Wydruk około 7,15 €–8,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…
Wydruk około 6,36 €–7,78 € nettoWstępna wycena jednego wariantu
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
“Milspec” Bug A Salt 3.0 Stock Adapter In the pursuit of owning the ultimate tactical bug exterminator, I was in search of a robust, tight-fitting stock adapter for the Bug A Salt 3.0 that didn't require tapping screws into the body or…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter vom Perlator M24 Gewinde auf ¾ Zoll Anschluss. Mit diesem Adapter kann ein Gartenschlauch an einen normalen Wasserhahn angeschlossen werden. Druck aufrecht auf M24 stellen, keine Stützen erforderlich. Perlator Tool:…
Wydruk około 1,04 €–1,28 € nettoWstępna wycena jednego wariantu
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Wydruk około 0,27 €–0,32 € nettoWstępna wycena jednego wariantu
Adapter for connecting a 6mm PTFE hose to a 4mm reverse bowden PTFE tube. The holes are 4.1mm or 6.05mm in diameter and approx. 10mm deep. They therefore form a friction fit after contraction during printing. A conical area is provided…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 489742 two #6-32 x ½'' machine screws To install: Mark which plugit adapter cable replace the black/white cable Remove the cable, strain…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was wondering if Quest 2 straps could be made compatible to the Quest 1. Indeed, it is possible. I liked the design of @sekazi (https://www.thingiverse.com/thing:4624192), but the adapter is movable, so I decided to make it 2mm longer…
Wydruk około 1,95 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
Adapter for the new 62.5 mm diameter (2.46 inches) Sunlu spools to 55 mm (2.16 inches) spools to work with the AMS Lite . It has 2 tabs for better attachment to the spool. No print support needed with this model. Print with 15% infill. It…
Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remixed this really great design of this Festool adapter that twist and locks into place just like any native Festool product. I've added a reducer so that it expands to a 2.25" outer diameter so that I can use my old RIGID vacuum…
Wydruk około 4,92 €–6,01 € nettoWstępna wycena jednego wariantu
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I do some hiking and have a few MOLLE style pouches, some on my rucksack and also like to carry some on the hip belt of the ruck sack. Those pouches are nice and rugged but are not that easy to keep on the hip belt as they easily fall off…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Idea: hide the record player pin inside the tower (up to 19 mm) show as much as possible of Hogwarts around the tower Design Process: I modeled everything myself but used this model as reference Overall dimensions: weight height…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
These parts allow you to mount standard 12mm hex wheels to your 3D Sets Rancher. The parts include a 12mm sleeve and a 12mm diameter washer to keep the 3mm screw centered. Don't know what this is? Check out the fully 3D printable 4WD RC…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
Wydruk około 2,87 €–3,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter enables to attach the official spool holder on the right side of the printer. You can place your printer at a space with low ceiling! It has additional holes for filament guide, one is 6mm-diameter through hole, the other is…
Wydruk około 4,66 €–5,69 € nettoWstępna wycena jednego wariantu
You need the Bracket and 4xM4 screws
Wydruk około 4,37 €–5,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I created the case to have the module ("EBUS to WiFi adapter module" by Daniel Kucera) protected from dust. You may buy the module here: https://lectronz.com/products/54 In the correct orientation all the parts can be printed without…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bike bottle cage/holder adapter to lower/raise cage mount. Use m5*12 screw, longer screw can damage your bike frame , always first try to install cage to adapter and see if screw does not stick out. Cage mounting holes are 64mm apart…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Wanted to use teslapunk's Flexible Segmented Vacuum hose with my Festool CT MIDI I so I remixed etinen's adapter to be merged into the original DN40 part from the Flexible Segmented Vacuum Hose. Update: Didn't like how tall the original…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter to use Dyson V8 and later accessories with an older Dyson V6 vacuum cleaner. I printed the final part with a 4mm nozzle, 0.10mm DETAIL profile in Prusa Slicer, just because I wanted a nice, clean finish. All the prototypes were…
Wydruk około 4,40 €–5,37 € nettoWstępna wycena jednego wariantu
This adapter inserts into certain cardboard spools to eliminate the cardboard dust from spinning against the spool holders. Fits cardboard spools: Polymaker Overture Inland (Microcenter) Duramic I personally use Polymaker filament because…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Full-face dust masks are very expensive but full-face military surplus masks are quite cheap. So I made adapter from NATO 40mm x 1/7 (gas mask standard thread) to Secura filter connector. Secura is polish local brand of safty equipment.…
Wydruk około 1,54 €–1,89 € nettoWstępna wycena jednego wariantu
Hi I build stove heater for my Intex SPA pool - it was welded from stainless steel pipes, old stove and some garden hose laying around. I am using old dishwasher pump to circulate water, although it is centrifugal - as pump lays on ground…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
Banish the clutter of electric toothbrush cords from your bathroom countertop with this sleek solution! If your spouse has been nudging you to tidy up and you own an Oral-B IO Series 6/7/8/9 toothbrush (the models sans a display charging…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
This adapter will convert a common 4" dust collection fitting on many wood working tools to a 2.25" hose to use on many Shop-Vac hoses. I included the PrusaSlicer file for placement and print settings.
Wydruk około 8,49 €–10,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapts the eyelet drive on my scissor jack (meant to be used with a hooked shaft by hand) over to a ¾" or 19mm socket. My 1.5 ton scissor jack didn't have any method of driving with a drill. I had seen this on other jacks online, so…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
designed an adapter to use the cricut joy infusible ink pens, i bought by mistake, in my cricut explore air2. Print instructions print it without supports
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
These are attachments and adapters for the Milwaukee M18 2 gallon wet/dry vacuum, model 0880-20. You can use the hose on it's own or with the printed micro crevice tool accessory. It is compatible with the commonly available micro vacuum…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
The adapter has 5 pegs on the back to mount it to an IKEA Skadis peg board. They go in easily but hold on strong. Once mounted it provides enough clearance to the board to hold Prusament spools with 2cm to spare. Please post a Make of…
Wydruk około 4,28 €–5,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
another Outin Nano adapter for coffee cups
Wydruk około 2,09 €–2,55 € nettoWstępna wycena jednego wariantu
I liked the design of "Gardening leaf rake with replaceable teeth " by https://www.printables.com/social/5644-darazsweb but I do not have a Gardena pole. This adapter will connect to a standard broom/paint screw pole which uses ¾" 5 TPI…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This adapter lets you connect a Logitech C270 webcam to a standard, ¼" threaded tripod mount. I use a small Manfrotto tripod to capture timelapses and monitor my prints, so I wanted to be able to put the webcam on a standard mount. The ¼"…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter for connecting a 4 inch flexible duct to an AC Infinity CLOUDLINE LITE A6 6 inch inline fan . It serves the same function as this commercially available adapter . I coated the adapter with a resin clear coat to make it…
Wydruk około 15,64 €–19,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Very minor supports built into the adapter. (see red in below image). This adapter is designed for the tapered suction end of my central vacuum hose. Connection diameters are as per the following image. 0.2mm layer height 0.4mm nozzle PLA…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Adapter that attaches the magnetic PFTE coupler directly to the Prusa Mini filament sensor, no more dangling PFTE tube necessary. This also solves the problem that the filament sensor does not hold the input PFTE tube tightly at all. When…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![Universal Parkside Battery Adapter [PAP 20 A1]](https://media.printables.com/media/prints/108918/images/1078299_f1a15a72-f130-43d8-867a-9151b1efc70e/img_20211230_150124.jpg)
