Wyniki wyszukiwania: alti

Sortowanie

258 modeli

P
PrintablesChromatic

Flexible Saltire (Scottish flag) - MMU not needed

The maximum height is 4.5 mm. The top blue part is 0.6 mm high. If you use the stl, add a colour change before this starts. I used a 0.15-mm layer height, enabled ironing, and printed using Jayo white PLA and Lonenessl Blue PLA. The print…

Wydruk około 16,04 €–19,61 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
14
Ocena
0

V2 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…

Pobrania
1903
Polubienia
1488
Ocena
3,83
P
Printablesmrusk

Altimeter for Flight Simulation

The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…

Pobrania
1816
Polubienia
210
Ocena
5

V1 -- Nema 17 Peristaltic Pump / Water Pump / measuring Pump

Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…

Pobrania
1020
Polubienia
422
Ocena
4,2
P
PrintablesH3dSprint

Peristaltic pump - nominal diameter Ø8mm - for fluids like cooling water, water, engine oil and other similar

All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…

Pobrania
1014
Polubienia
236
Ocena
4
P
PrintablesTate S

Drill Powered Peristaltic Pump, Gear Oil Transfer Pump

Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…

Pobrania
936
Polubienia
429
Ocena
5
P
PrintablesCaptainBobSim

Cessna 172 Altimeter for Flight Simulator

The Cessna 172 Project Altimeter Bill 'o Materials: 📦 3D Printed Parts 📦 Arduino Mega 2560 (can be shared with other components) 📦 Decal (You can use a shipping label) 📦 (8) M3x6mm screws 📦 (4) M3x20mm countersunk screws 📦 (3) BYJ-48…

Pobrania
856
Polubienia
72
Ocena
5
P
PrintablesDaniel

Mini peristaltic pump for 28BYJ-48 stepper motor

This is a 3D printable model for a peristaltic (aka hose) pump for either 3mm or 4mm silicone hoses operated with the popular and cheap 28BYJ-48 stepper motor. The motor is usually sold with a fitting driver shield and there are various…

Pobrania
840
Polubienia
124
Ocena
4
P
Printablespmeineke

Baltimore Ravens

Baltimore Ravens 1st Layer Black 2nd Gold 3rd White 4th Black 5th Gold 6th Purple

Pobrania
798
Polubienia
62
Ocena
5
P
PrintablesUppfinnarAXEL

Peristaltic Pump Simple

3d print a simple waterpump! This is a peristaltic waterpump with high pressure and low waterflow. I used it in a small automatic greenhouse where it connected to a spray nozzle. Hardware required: Yellow TT-motor (ideally low rpm and…

Pobrania
530
Polubienia
72
Ocena
4
P
PrintablesShane

Peristaltic Pump

This is a simple peristaltic pump I designed. It uses a 755 motor and 608 bearings that fits 3.2mm Bore Size Silicone tubing. The motor is mounted into the rear of the frame using M4 screws, The bearings and bearing mounts are friction…

Pobrania
464
Polubienia
101
Ocena
0
P
Printableskubas_cze

Cessna Altitude clock

My first complex model ever - gift for my grandpa who love flying! Model of table clocks styled asi Cessna altitude gauge. Printed in 4 parts. Not included: clockwork (I used this one →…

Pobrania
446
Polubienia
140
Ocena
5
P
PrintablesXVIIarcano

Adjustable pressure clamps for Hadley telescope altitude bearings

These are spring loaded clamps for the “standard” plastic frames and tubes base included in the official Hadley telescope model and its metric remix version . The clamps are based on M4 hardware left over from my metric build, but will…

Pobrania
418
Polubienia
47
Ocena
4,8
P
PrintablesJan

Peristaltic Pump (simple & working) for an automated fertilizer

Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…

Pobrania
399
Polubienia
98
Ocena
4,5
P
PrintablesZRNNN

Peristaltic Pump _ Nema 17 _ 608 Bearings

as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…

Pobrania
391
Polubienia
41
Ocena
0
P
PrintablesBobbyZ

Baltimore Ravens Statue

This was a design that I did when a friend asked me to make him a Ravens statue for his work desk. This was one of my first creations but I cannot take credit for models used. I hope some of you Ravens fans out there can enjoy it. Thank…

Pobrania
385
Polubienia
34
Ocena
5
P
Printablesr3stless

Guide for the Airport and Altitude Cards in the Sky Team Boardgame

When playing that great game i was annoyed when i had to move the airport or altitude cards and they did not stay in line. So i designed a little Guide which adds no thickness to the game board to fit existing Inserts. The cards slide in…

Pobrania
361
Polubienia
36
Ocena
4,5
P
PrintablesDavid Ondřej

Experiment from Casualties unknown

model of expie from casualties unknown based off blender model made by assasingecko i highly suggest adding as much supports as possible because this is a tricky model to print

Pobrania
354
Polubienia
25
Ocena
0
P
PrintablesHemi345

Bearing eyelet removal tool for Rocky Mountain Altitude / Instinct / Pipeline

If you own a newer Rocky Mountain full suspension bike, you'll know the bearing eyelets on the rear shock are a pain in the ass to remove for replacement or to perform an air can service. The official Rocky Mountain tool is $$ and…

Pobrania
353
Polubienia
14
Ocena
4
P
Printablesespn8-theocho

MissileWorks RRC3 Altimeter

I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…

Pobrania
345
Polubienia
11
Ocena
5
P
Printablesmisan

Yet another peristaltic pump

To use together with a geared Nema17 stepper motor with a flanged 8mm output shaft like this one http://2.wlimg.com/product\_images/bc-full/dir\_37/1091420/geared-stepper-motor-1392929.jpg I am using 10mm OD surgical tubing. Action video…

Pobrania
338
Polubienia
28
Ocena
0
P
Printablesjpoles1

GrowFlow - NEMA 17 Peristaltic Pump

BOM: Note: incomplete, haven't had time to check exact fastener lengths: Bearing Assembly (Non-Print in Place Version): 1x M3 bolt + nut 3x M4 bolts + nuts 3x Needle Roller Bearings (4mm Bore Dia, 8mm OD, 8mm Width) Other: Silicone Tubing…

Pobrania
311
Polubienia
67
Ocena
3,5
P
PrintablesGjoopa

Baltimore Ravens Logo

Multi layered Baltimore Ravens Logo

Pobrania
308
Polubienia
15
Ocena
0
P
Printablesmilks

Glueless mini peristaltic pump

Based on off_grid_craft's design ( https://www.thingiverse.com/thing:3445927 ). These motors are small and cheap and will stall if the pump is run too fast. Produces a very slow, precise and reliable flow rate. I have mine operated by an…

Pobrania
295
Polubienia
68
Ocena
5
P
Printables3D-Saba

Meow-tastic Mealtime: 3D Printed Cat Bowl Design for cats

This 3D printable cat bowl model is designed to provide a comfortable and stylish feeding solution for your feline friend. With dimensions of 14x14.5x4 cm (5.5x5.7x1.6 inches), this bowl is spacious enough to accommodate a generous…

Pobrania
295
Polubienia
22
Ocena
5
P
Printablesjustbennett

Altitude Control (Z Bearing Turner) for Hadley Telescope

This is a replacement for the left z-bearing for a Hadley Telescope with a geared edge that interfaces with a control wheel for one-handed predictable control of the telescope in the “up-down” direction. (I'm new to telescopes. I assume…

Pobrania
250
Polubienia
45
Ocena
4
P
PrintablesWire

FRC Swerve Drive Specialties MK4i low profile full cover

This is a low profile cover for the Swerve Drive Specialties MK4i drive system. The cover is designed to fully cover the drive all the way down to the mounting plate so the belt is fully covered. Also there are mounting points for adding…

Pobrania
238
Polubienia
8
Ocena
0
P
PrintablesvagueDirector

Arma 3 - Altis 3D Map (Made from satellite imagery of Lemnos)

An 3D map of Altis. Source images acquired from: http://terrain.party/ Tutorial (not mine) which goes through the process: https://www.youtube.com/watch?v=cZxyN7esQkY Printed with a 0.4mm nozzle at 0.2mm layer height. Painted to add…

Pobrania
225
Polubienia
40
Ocena
0
P
Printablesstratrider

Nissan Altima Shift Lock Override Button

Is your Nissan Altima Shift Lock malfunctioning? Don't want to pay $800 plus to the dealer to have it replaced? Tired of using a screwdriver to press the lock release button? This button will fit where the shift lock release cap is…

Pobrania
215
Polubienia
7
Ocena
5
P
PrintablesSalvadori3D

Baltimore Ravens Oversized Necklace, Pendant

Here is the awesome looking Baltimore Ravens Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers Wo Want a Commercial License to sell my prints? Join my Patreon or Thangs as…

Pobrania
195
Polubienia
16
Ocena
5
P
PrintablesBlake Kizer

Baltimore Oriole Bird created with HueForge

Baltimore Oriole Bird I created in HueForge. Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Black until layer #11 at 0.96mm…

Pobrania
195
Polubienia
21
Ocena
0
P
PrintablesT B A

Measurement Test / Test der Maßhaltigkeit

Here a little test to measure the precision of your 3D printer. Hier ein kleiner Test, um die Präsision Deines 3D-Druckers zu testen.

Pobrania
178
Polubienia
4
Ocena
0

Peristaltic Pump mount

A din rail mount for a Peristaltic Pump. The pump we used: https://a.co/d/fWMLnrs You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or…

Pobrania
164
Polubienia
25
Ocena
5
P
PrintablesRansomMcNally

Baltimore Ravens Logo

added a flat back to the open logo and a color change after the first layer of the logo. my first attempt with fusion360

Pobrania
163
Polubienia
12
Ocena
0
P
PrintablesMichel

Nema 17 Peristaltic Pump-608 Bearings-cooling water-engine oil-water

Parts: printed parts (see .stl) 5x 608 bearing hose silicon hose Ø6/4mm | length: min. 1m recommended fixing elements 3x cylinder screw M4x25 2x cylinder screw M4x15 5x hexagon nut M4 4x M3x10 Printing: Material PLA Infill 25% infill…

Pobrania
153
Polubienia
17
Ocena
4
P
PrintablesSDHayes

Azimuth/Altitude mount for the Hadley 114/900 telescope

CHANGELOG: 07.12.22 uploaded stl/3mf revised Dovetail Female parts, changed to include thumb screws to lock down the scope in the dovetails and stiffen up the overall assembly. Big improvement. Left the original versions up. I am using an…

Pobrania
149
Polubienia
26
Ocena
5
P
PrintablesWingedFuse

Altimeter Motor Visualizer

Important note: This extruder motor visualizer is intended to be printed with the MMU2S or any multicolor printer. But if you have a regular printer and still want to print it, then print the files named “Single color printer” and paint…

Pobrania
144
Polubienia
93
Ocena
4,6
P
PrintablesJohnny Casino

Baltimore Ravens Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Pobrania
139
Polubienia
17
Ocena
5
P
Printablesgetta7

Airbus A320 Altitude Knob

Altitude Knob for DIY FCU Module

Pobrania
137
Polubienia
8
Ocena
0
P

Baltimore Ravens Oversized Necklace Logo

Baltimore Ravens Oversized Necklace Logo that I designed. I hope you enjoy!

Pobrania
134
Polubienia
12
Ocena
5
P
PrintablesJohnny Casino

Baltimore Ravens Football Helmet - With Stripes

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Pobrania
130
Polubienia
14
Ocena
0
P
PrintablesSalvadori3D

Baltimore Orioles Oversized Necklace, Pendant

Here is the awesome looking Baltimore Orioles Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. (Chain Used: https://makerworld.com/en/models/25960#profileId-639228…

Pobrania
126
Polubienia
14
Ocena
5
P
PrintablesDalama

Laboratory Peristaltic Pump

This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…

Pobrania
125
Polubienia
39
Ocena
0
P

Baltimore Orioles Oversized Necklace Logo

Baltimore Orioles Oversized Necklace Logo that I designed. I hope you enjoy!

Pobrania
121
Polubienia
3
Ocena
0
P
PrintablesSkydiveMann

Alti 2 N3 or Atlas Skydiving Altimeter TPU Sew on Mount

A mount to attach your N3 or Atlas to wrist band, suit arms, swoop shorts or anywhere else you want it. Simply sew through the tpu, recommend a heavy duty sewing machine for ease but can be done by hand. If you struggle you can melt holes…

Pobrania
120
Polubienia
4
Ocena
0
P
PrintablesKisssys

Peristaltic pump

This peristaltic pump has been made as small as possible to inject small quatities of test solution on command. It has been tested with this tubing.…

Pobrania
119
Polubienia
35
Ocena
0
P
PrintablesKiven

Parametric Peristaltic Pump With Mount

It prints as a single piece. The only non-printed part is the tubing. can be driven with a standard nut driver bit or a ¼ hex key this is a remix of this Parametric Peristaltic Pump which is a remix of this Gear Bearing

Pobrania
118
Polubienia
13
Ocena
5
P
PrintablesParker

DC Peristaltic Pump

I made this peristaltic pump to test water cooled parts, it uses 11, M3 screws, 3 small bearings, silicon tube, 1 DC motor and 3d printed parts. It can pump about 22 mL of water per second with a 4S battery. Motor (I used 12V 550rpm) -…

Pobrania
118
Polubienia
14
Ocena
0
P
PrintablesMalcolm

Peristaltic Pump - Variable Speed - Toggle on/off - Arduino & Easy Stepper

Developed for my PhD work. This is a peristaltic pump driven by a Nema-17 or alike motor using an Arduino (nano or alike) and EasyDriver. Files for the wiring layout and Arduino code are included. There is also a table that contains the…

Pobrania
115
Polubienia
23
Ocena
0
P

Peristaltic Pump

This is a peristaltic pump designed around 4/6 mm silicone tubing and driven by a JK42HS48-1204 stepper motor. I printed the parts in PLA for testing — works fine so far, but long-term durability hasn’t been checked yet. BOM The model…

Pobrania
112
Polubienia
14
Ocena
0
P
PrintablesSJM

drinking straw (thick) - usable as altitude z-axis test

Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation…

Pobrania
108
Polubienia
7
Ocena
0
P
PrintablesPhantomAura

iPhone MagSafe Mount For Nissan Altima (2012-2018)

This allows you to mount a MagSafe compatible iPhone in the 5th generation (2012-2018) Nissan Altima for use as a secondary screen. Works great with maps as well as the new StandBy feature in iOS 17. Fits in solidly to the lower storage…

Pobrania
106
Polubienia
11
Ocena
0
P
PrintablesTrex

Cute maltipoo

A cute Maltipoo lying on its back.

Pobrania
105
Polubienia
13
Ocena
0
P
PrintablesWHerzog

Peristaltic Pump for NEMA17

This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…

Pobrania
103
Polubienia
18
Ocena
0
P
Printablessnoot

EQ6-R Pro replacement altitude and azimuth knobs

I've been using these printed in PETG for the better part of a year without issue. Replacing the altitude lever-knob This is a drop in replacement. Start by removing the original lever and spring by unscrewing the internal screw. The…

Pobrania
103
Polubienia
3
Ocena
4
P
PrintablesJohnny Casino

Baltimore Ravens Football Helmet - New Logo

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Pobrania
101
Polubienia
10
Ocena
0
P
PrintablesNewMakeIt

Peristaltic Pump

This is a complete re-engineering of the excellent design of Ralf's Perstaltic pump. I printed his pump and built it to his specs, but I found that the small stepper motors would not really run the pump consistently or with enough power.…

Pobrania
97
Polubienia
30
Ocena
0
P
Printablesntalekt

Realtime Pool/Spa Solar Temperature Sensor

Realtime Pool/Spa Solar Temperature Sensor - Wemos D1 Mini 18650 TP4056 BME280 DS18B20 I wanted an enclosure to house multiple sensors, a battery, and a charging circuit. The enclosure could then be mounted to the back of a generic 5v…

Pobrania
97
Polubienia
20
Ocena
0
P
PrintablesTecno_Print_3d_

BALTIMORE ORIOLES OFFICE SHELF

Add a touch of style and sports passion to your workspace with this stylish Baltimore Orioles design. Features: Design Ideal size for branding or using as a background High print quality for a look Perfect for offices Filament change to…

Pobrania
93
Polubienia
8
Ocena
0
P
PrintablesFlexi maniak

Flexi Maltipoo Dog - Articulated Cute Puppy

After the great success of my Flexi Yorkie, I decided to create a Maltipoo ! There are very few high-quality Maltipoo models available for free, so I wanted to share this one with the community. 100% Print-in-Place: No assembly or…

Pobrania
93
Polubienia
15
Ocena
5
P
Printablessbellon

Altiplano Inlay/Organizer (for GeekUp tokens)

This is an inlay and playing organizer for the board game Altiplano including the expansion The Traveler and the mini expansion Sunny Days . (Note: inside space of the box should be around 30.5 cm x 21.5 cm for the print to fit.) It is…

Pobrania
93
Polubienia
14
Ocena
5
P
PrintablesSABvdF

Geared Altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel

An easier way to control the altitude bearing for metric Hadley Telescope (M4) with thinner attachment pad and larger manual control wheel, compared to the last remixes. Print the same as the other parts of your Hadley. You will have to…

Pobrania
90
Polubienia
17
Ocena
0
P
PrintablesWadingInPhoto

Extruder Altimeter

This is stupid, but that's the charm, right? For giggles, I made a 'working' altimeter for the back of my direct-drive extruder motor, 'working' in that the needle spins with the motor. Looking at the blank back of the extruder motor…

Pobrania
90
Polubienia
30
Ocena
0
P
PrintablesModal Prints

Peristaltic pump compatible with lego

Used https://www.thingiverse.com/thing:454702 to get a working pump and added holes to make it compatible with lego technic. I've been using it with 6mm silicone aquarium tubing to pump small amounts of citric acid into a baking soda…

Pobrania
90
Polubienia
7
Ocena
5
P
PrintablesKing James 911T

Underseat storage box for Yozma / Valtinsu / Cemoto electric dirt bike

Add some storage to your Yozma IN10, Cemoto D02 or Valtinsu EM-5 dirt bike, this is for the regular version NOT THE PRO version which is a different size. Very thin profile so it gives you maximum space, fits perfectly and the seat closes…

Pobrania
89
Polubienia
2
Ocena
5
P
PrintablesDAKUE1999

Crealtiy CR-10 SE Cam Holder

Crealtiy CR-10 SE Cam Holder. You need a bit of force when pushing it in because it's very tight, but that's just how I like it ;)

Pobrania
85
Polubienia
7
Ocena
0

Baltimore Ravens Wall Art - Multi-color

This multi-color print is designed to show off your Baltimore Ravens pride and easily hang on the wall

Pobrania
84
Polubienia
20
Ocena
0
P
PrintablesSalvadori3D

Baltimore Ravens Car Rearview Mirror Ornament

Description Here is a great gift or personal treat: Baltimore Ravens Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for…

Pobrania
80
Polubienia
7
Ocena
0
P

Crealtiy Ender-3 V3 SE lightbar remix

This is a set of mounting brackets for the Creality light kit. Modified from the original to fit the Ender-3 V3 SE, and add a wire clip.

Pobrania
79
Polubienia
18
Ocena
0
P
PrintablesAsus1357

Magswitch 150 shim for Baltic birch (18mm)

This is for the Magswitgh 150 Since the Magswitch mounting height is 3/4" and I use Baltic Birch (which is only 18mm) for my jigs which makes the switch sits proud of the base by 1.05 mm which is not a good thing. So I made a couple of…

Pobrania
75
Polubienia
9
Ocena
5
P
Printablesjpoles1

NEMA 17 Planetary Peristaltic

This is a remix of the peristaltic planetary gear with lots of improvements baked in. Most notably, this pump mounts directly onto a NEMA 17 stepper motor. It also opens up using a hinge to allow the tubing to be easily loaded into the…

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesBubsBuilds

High Flow, 2 Channel Peristaltic Pump

Full build details here Peristaltic pump with two flow channels, each of which capable of flowing up to 5 liters per minute, although recommended continuous flow rate closer to 2 liters per minute. Initially designed to be used with an…

Pobrania
75
Polubienia
15
Ocena
0

Peristaltic pump (strong)

I present my peristaltic pump for watering flowers on the balcony based on the engine from the Ford Scorpio ABS pump and a hose 8 mm (inner diameter) / 10 mm (outer diameter). I printed the pump from PLA because its elements do not come…

Pobrania
74
Polubienia
10
Ocena
0
P
PrintablesGatCode

Peristaltic Pump Controller Mount

This is a simple holder for a 5x7cm prototyping PCB with holes for a potentiometer and a LED. For the pump I used the design of silisand ( https://www.thingiverse.com/thing:1134817 ). The schematics of my circuit can be found in the…

Pobrania
73
Polubienia
26
Ocena
0
P
PrintablesMrMike

Chess Set - Baltimore Buildings

Baltimore Chess Set This model includes various buildings in the city of Baltimore represented as chess pieces. Each piece also has a cutout in the bottom that can accept a magnet in the case you are making a magnet board. I made a wooden…

Pobrania
73
Polubienia
12
Ocena
0
P
PrintablesJoE

Spitfire Altimeter Clock

A model of an altimeter from the Supermarine Spitfire Mk XIV with a clock mechanism. Assembled using glue and screws. You need: Screws and nuts M5 x 25 mm https://www.amazon.co.uk/dp/B07RB9NYMS?ref=ppx_yo2ov_dt_b_fed_asin_title A round…

Pobrania
72
Polubienia
29
Ocena
0
P
PrintablesBubsBuilds

Modular Peristaltic Pump Concept Tester

My first attempt at a 'budget' dosing peristaltic pump, mixing some design concepts together from some previous, related designs. You can find more info on the design, and I will be continuing to add related designs, here. One of the main…

Pobrania
71
Polubienia
21
Ocena
0

Crealtiy CR-10 SE camera holder

Crealtiy CR-10 SE camera holder

Pobrania
71
Polubienia
8
Ocena
5
P
PrintablesBubsBuilds

Manual Peristaltic Pump

I made these pumps primarily to test something else where I wanted to use peristaltic pumps, but needed fine control...I also just was curious how hard it would be to make a printed peristaltic pump :) Turns out, not too bad! I used 3/8"…

Pobrania
70
Polubienia
17
Ocena
0
P

Featherweight Altimerters 38mm Av Bay

This is a coustom 38mm Avionics bay designed for the Featherweight Altimeters GPS tracker. Assembly is very simple, first you take the threaded insert and epoxy it inside the 38mm nosecone of your rocket and then you can thread in the av…

Pobrania
69
Polubienia
11
Ocena
3
P

Perestaltic Pump (Nema 23)

Additional materials needed: 4x M4x30 flathead screw to mount pump to motor 3x M3x5 sinkhead screw to mount rotor lid 3x 608Z bearing Use M3 and M4 thread cutter to cut the threads in the rotor lid and pump housing bottom respectively. If…

Pobrania
68
Polubienia
5
Ocena
0
P
Printables3D LEE

Altiplano Cart replacement

A remix of https://www.thingiverse.com/thing:2150276 for the game Altiplano. The size is close to the cart cube so it doesn't take up much space on the board. Category: Games

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesXDenasdc

Altitude Control Z Bearing Turner M4 for Hadley Telescope

Original model had imperial holes that were too loose. M4 remix was designed for tighter fit.

Pobrania
67
Polubienia
8
Ocena
0

Sony E to Altix adapter

Adapt GDR (DDR) Altix lenses to a Sony E-mount body .stp files for further adjustments included

Pobrania
65
Polubienia
1
Ocena
0
P
PrintablesModel Magic

The Sopranos - Paulie Walnuts Gualtieri - 1999-2007

The Sopranos - Paulie Walnuts Gualtieri - 1999-2007

Pobrania
63
Polubienia
12
Ocena
0
P
Printablesbiscuitless

Peristaltic Pump Housing

This is a housing for a pump. I created this so I could move isopropyl alcohol from a container to a filter set-up This contains: 12V Barrel Jack DC Motor Controller Peristatic pump On/off Switch The switch is optional since the motor…

Pobrania
62
Polubienia
3
Ocena
0
P
Printables3D LEE

Altiplano board game coins

Created coins for the game Altiplano. Print and glue the two sides together. It has a nice heft to it and can stack. Category: Games

Pobrania
61
Polubienia
9
Ocena
5
P
PrintablesJames Gurney

Hadley Hill and "Strurdy" Mount Worm Gear Altitude adjustor

Introduction This is a mod for the Hill Mount or "Strurdy" Mount to add a worm gear to gradually adjust the altitude of your Hadley scope. The use of a worm gear accomplishes a couple of goals: High gear ratio and minimal backlash,…

Pobrania
60
Polubienia
11
Ocena
0
P
PrintablesDLD Design Fab

Nissan Altima Shift interlock Override Button

This is a shift interlock override button for Nissan Altima. Many owners experience failures of the shift interlock solenoid or switch in the shifter assembly. This tool can get you by until a proper repair can be made. Disclaimer: I do…

Pobrania
60
Polubienia
2
Ocena
0
P
PrintablesBob

Baltimore Ravens displayable football

This is a really fun Baltimore Ravens football with a cut on the bottom for easy display. Print Settings Rafts: No Supports: No **Resolution:** any Infill: 20-40% **Filament:** any pla/any black/purple Category: Signs & Logos

Pobrania
60
Polubienia
3
Ocena
0
P
Printablesrattlehead

THAAD (Terminal High Altitude Area Defense) Missile

This is a simple 2 piece model of the thaad interceptor missile. this model is based solely on this drawing i found on Wikipedia: https://commons.wikimedia.org/wiki/File:Wfm_thaad_diagram.svg

Pobrania
58
Polubienia
3
Ocena
0

Dual Peristaltic Pump mount with mixing stepper motor din rail mount

A din rail mount for two Peristaltic pumps and a stepper motor to drive a mixing padel. The pump we used: https://a.co/d/fWMLnrs The stepper motor is a standard NEMA 17. You will need to print two tabs for this design. They can be found…

Pobrania
56
Polubienia
12
Ocena
0
P
Printablesflohoff

Peristaltic pump mount

Needed a plate mount for a 12V peristaltic pump. In this case 48mm bore mount distance.

Pobrania
56
Polubienia
4
Ocena
0
P
PrintablesBB-Parts

MakerHawk Raspberry Pi night vision camera for articutalting mount

This camera mount is perfect in use with the articulating camera mount, to get the perfect shots while printing. I have printed it on a raft and with the following settings 0.12mm layer hight 3 top and bottom layers 3 outer layers 20%…

Pobrania
55
Polubienia
4
Ocena
5
P

Radial-Wellendichtring Ø35x22x6 (Simmering) **!!! NICHT FÜR VERBRENNUNGSMASCHINEN oder Schmierstoff haltige Getriebe !!!**

Radial-Wellendichtring Ø 35 x 22 x 6 (Simmering) !!! NICHT FÜR VERBRENNUNGSMASCHINEN oder Schmierstoff haltige Getriebe geeignet!!! !!!Dies Teil soll einen handelsüblichen "Simmering" ersetzen. ACHTUNG NICHT in Verbrennungsmaschinen,…

Pobrania
55
Polubienia
2
Ocena
0
P
PrintablesKing James 911T

Screen Center Middle Mount for Yozma / Valtinsu / Cemoto electric dirt bike ebike emoto

Innovating on other designs this center mount won't break when you try and snap it over, it also won't slowly go loose and need to be replaced.. This clamping version will be the last center middle mount your Yozam, Cemoto or Valtinzu…

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesDEs3Ds

UP1801 Model Rocket - Launch with or without Altimeter

UP1801 is a model rocket that is launched with 18mm model rocket engines and can be flown with or without an altimeter payload. Holes in the sides of the body section allow for barometric altimeter pressure equalization. Requires model…

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesRobert Graf

ACI - Altimeter Face w Kollsman, RMI Hands and Middle +1mm

I printed all parts (except the back: layer height 0.28mm) with 0.16mm layer height and 0.6mm line width (on a 0.4mm nozzle). This way, 2 walls, 5 layers top/bottom and 20% infill are enough. Printed the hands with less speed, like…

Pobrania
50
Polubienia
7
Ocena
0
P
PrintablesJroe1943

Stable Altitude Mount for Hadley Family Telescope

I, along with half the Universe, love the Hadley telescope design. However, I found it is a bit ‘wobbly’ in its original design to I redesigned the altitude bearings with greatly improve performance. Being this is a light weight telescope…

Pobrania
50
Polubienia
11
Ocena
0
P
PrintablesPelf

Hadley Altitude Bearing Spacer

Wooden hadley mounts need the Mount_Interface_wider_WOOD-ROCKER-ONLY.stl If you printed one of the other ones like I did (I wanted the one with the planets on it) then the altitude bearings will be too close together for wooden mounts.…

Pobrania
50
Polubienia
5
Ocena
0