940 modeli
There are numerous designs out there of clips that secure the lid on IKEA Samla (Filament storage) boxes. But I could not find any that really presses the slightly overhanging lid onto the box to keep it as air tight as possible without a…
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Hello even more creative DIY Cine / Movie Making Amateurs and Professionals, This was a Long Lost Generator. Gladly some people make backups and modify it so it can be used more easily. Install OpenSCAD from https://www.openscad.org/ Open…
I needed to separate the fasteners in the 5l IKEA Samla box. I managed to get a 3D model of it, so modelling the partition was a matter of a few minutes. I modelled the partitions in two versions. If the partition is too tight in your…
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Stable box for the desiccant which goes under the spoolholders of the ikea drybox (Samla, 22L). https://www.printables.com/de/model/98008-drybox-for-4-spools-ikea-samla-22l-based/files
This is a CAMLOCK compatible detailing attachment for a shop-vac. The model is a little over 238mm tall so it will print on an Ender 3 or larger. This works with the CAMLOCK 50mm system found here I have included the step file for anyone…
The way you can store your filaments in the Ikea Samla boxes is great. But then you need an cupboard to place all your Samla boxes in. And I did not want that. So I created two holders that combined can hold a full Samla box. I have…
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
This allows a Dewalt orbital sander (DWE6421/DWE6423) to connect to Peter H's camlock fitting . It should also be compatible with other dewalt tools that are designed to connect to their dust extractors. I designed the connector to be…
EN: Grid for plant propagation box. Samla from Ikea is used as the box, size 11 l. The grid is placed at the bottom of the box and separates the plants, or their pots, above the water surface. The water under the plants serves to increase…
This is a remix for the Ikea Samla Drybox filament outlet by Jindřich Beneš for connecting a PTFE tube via a PC4-M4 fitting. I use it to get directly from the box into the MMU buffer with a PTFE hose. There I have an Easy to Load…
I like the idea and design of the SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH by PeterH, but after printing it with PLA and 0.3mm layers, the hose connector and the male adaptor would not fit together. So I redesigned the male…
Bring a touch of modern elegance to your space with this Geometric Twisted Heart Vase . This model features a unique architectural transition, starting from a solid hexagonal base and gracefully spiraling into a perfect heart shape at the…
Update 05/23/2024: Now that Frantisek23 has further perfected his design , I definitely recommend his new solution and basically declare my remix obsolete. Since the EndRib_V1b Mini.stl model is no longer available from him in the course…
Remixed to add 1.5mm to the rail slot to prevent flashlight from sliding forward/backward. Printed in Hatchbox PLA Pro. Fits pretty snug and may require a little force to get it seated.
The popular introductory level mycology guide found at r/unclebens recommends using Ikea Samla 4 qt boxes and lids for spawning mycelium to bulk. During the fruiting stage, the lid is flipped and adjusted for airflow. These clips snap…
I remixed the original version as my copy of the Hamlet game only has 3D chruch with 5 pieces, which are a different size as well.
Pomáhá omezovat hltání pamlsků u psů a koček.
Adapter parts to use an IKEA SAMLA box directly on a food dehidrator, like the SilverCrest one (but there are other brands for the same dehydrator). Why? You get a 4-roll filament dryer for a cheap price! You can have multiple boxes of…
This is a lid made for the Drybox silica tray made by Harabi. It's all based on ThomasS spool holder for the 22 L IKEA SAMLA. The cutouts are 2,5mm so ideal for silica with a diameter > 3mm
Standard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could…
About the Streamline Phone Stand: The Streamline Phone Stand is designed to be both functional and stylish. With a height of approximately 66 mm and a width of 56 mm, it offers a very compact, stable base for smartphones. The curved lines…
Remixed version of the original, 2 cm higher to accommodate more space for silica gel pearls at the bottom of the box. Watch my video about the new version here: As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are…
A seamless phone/ipad stand. It takes 1 h 30 min to print. No overhang, NO sharp edges, No support, YES YES YES. More stands with various logo can be found in my other models, e.g.,…
Description : This slim & sturdy wallet has room for (6) cards and a bonus slot in the middle for paper cash. Why no coins? …Because: My Money Don't Jiggle Jiggle, it Folds . (sorry could not resist… lol). The model is quite versatile &…
I have investigated many different ways of adapting the CAMLOCK system to other vacuum hose dimensions, but the variety of diameters and hose types seems to be infinite. Sadly there is no one size fits all approach. In the CAMLOCK system,…
3D Print an amazing modular LED track system with SEAMLESS Diffusers. Say goodbye to visible lines where the tracks meet. These diffusers fit on my Duality LED Track System. I'll show you how I designed, how to 3D print, and install these…
Edit: I also tried a different approach here: Let's build...Drybox v2! by Ren | Download free STL model | Printables.com You can find many single parts, videos or blog posts regarding dryboxes. When I realized I have stringing problems…
Want to elevate your photo's of your recent projects? This simple seamless background support is to be used with your normal poster board that you find at your local dollar store or walmarts of the world to create a clean and simple…
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
EN: This is my seamless Peg Board V3 (#0111). The mounting screws are countersunk. All holes are useable. Minimal support is required (Tree Support). I have added a single pin so that you can quickly design your own holder. Just add them…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. With my Gridfinity Ikea Samla adapter (…
Summary Smart Dry Box designed for the Ikea Samla 45l box. It supports 6 spools, each buffered by a fully enclosed wheel buffer utilizing the complete box height. Spools, Buffers and Desiccant containers all can easily be loaded from the…
Purchased some 22L Samla from IKEA but they said that opposed to the 44 lits one, the 22L does not have lid fasteners. Well now it does since i thought it was a good addition to make a dry box for my filaments. Cheers. Print instructions…
NEW - now available for clip together baseplates If you want to save some filament on this print I added a version that uses my clip together baseplates https://www.printables.com/model/633086-gridfinity-clip-together-baseplates/files To…
Reupload of Beaver Works 's great work that he uploaded to MakerWorld The official Snapmaker top cover costs a whopping $249 ... and my wallet simply did not approve of that purchase. So, I had to take matters into my own hands and create…
Summary Another simple Clip for your 22l Samla Box with or without sealing. Just a satisfying “Click” and closed. Use a strip of double-sided adhesive tape (showcase on the pictures) and you are done with searching your Samla Clips. I…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
This is a solution for a clip to lock the IKEA SAMLA 55/130l boxes. I did not find a solution for this box size as simply scaling a 22l clip does not provide a solution tightly closing the box. It creates a tight closing and is easy to…
IKEA Samla Clip for 45/65l Box. Printed in PLA Updated the files it is now a bit thicker because my Clips creeped quite a bit. Print instructions Printed in PLA 100%Infill
My version of the Samla filmant storage is a minimalist design which is simple and quick-and-easy to print. Check out on YouTube how to build it, BOM with links in the description: UPDATE: 19/12/2021 I have added a 3D printable quick…
Customizable inserts for the IKEA Samla boxes (5, 11 and 22 liters) Development here: https://github.com/Alex9779/IKEA-Samla-Inserts The repo might have some updates not yet posted here, so have a look there too! The models here are just…
Designed an IKEA SAMLA clasp, based on the original design. Works perfectly. Has a bigger lid for removing it more easily from the box. Print instructions Category: Containers Summary Designed an IKEA SAMLA clasp, based on the original…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are used by many. Sadly, when using a short piece of pipe to hold filaments, changing just one without disturbing the other three is very hard. Each Samla box can…
v2 features include: Tapered shaft hole to make the propeller lift off easier. Blocking the shaft hole from the top side so you can only put it on in the correct orientation. Tested with TPU filament. Appears to fly just as well and far…
About Remix of the silica gel box: Adjusted for better fit in IKEA Samla 22L box Samla 22L has a bottom size of 300mm x 216mm (measuring the largest usable rectangular surface) This box's dimensions are 146.4mm x 100mm This means you can…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…
Checkout the build on my YouTube Channel for more details on how this gearbox works: WARNING: This is a very advanced 3D printing project and even more so if you chose to make the gearbox full functional. I've provided the .3mf files but…
DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…
The community has created some incredible, creative solutions for the Snapmaker U1 enclosure. However, most are quite bulky and require significant time and material. Born out of a need to finish a project with a nearly empty roll of…
DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
This is an insert for the Ikea Samla 22L drybox to improve filament spool storage (not designed to print out of the box). The insert prevents the spools from rolling around and sitting directly in the desiccant (and therefore pulling…
With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…
A collection of male adapters to connect to the CAMLOCK system by PeterH . Peters design of the CAMLOCK system is great for simple quick connection to attach various items to a vacuum hose. This model offers a set of 400+ male adapters to…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting suits a 40mm inside diameter, which will fit generic compound mitre saws and inside many standard vacuum cuffs. It fits perfectly on my Makita saw, to allow easy CAMLOCK…
I wanted the lid clips for IKEA Samla Boxes in different sizes. The fit is similar to the originals. I have currently only versions for the 5/11/22L & 45/65L sizes of the samla boxes. Please make sure to print the appropriat size for your…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…
NOW CUSTOMIZABLE: https://github.com/fidoriel/Mini-Tray You can modify this code to generate you size. You may create a PR. Update 26.01.2023: Today I have decided to make the OpenSCAD source public, because there were some requests for…
A seamless tile that can be used in multiple copies to create something in large scale. The dimensions are a bit odd [196x245], but was trying to create a cover for my laptop. Print at 100% infill with a layer height of 0.08mm with a base…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 23 to 22mm which is slightly less than 1" and is suitable for many Makita and similar sanders, and connect to the CAMLOCK end. It may be a slightly loose fit…
Having a variety of Samla Clips I decided to label them with the matching box volumes. Also extended/shortened all clips to 3cm width - Make sure you use the correct print orentation to avoid overhangs - Remixes of the following models…
I wanted a simple storage solution for spare filament spools that utilizes the widely available IKEA Samla 22l Storage box with lid and keeps the filament dry during storage. To keep it as simple as possible, the spools can rest directly…
Several 3d printing filaments are hygroscopic, meaning they absorb moisture from the surroundings which can lead to poor surface finish and a clogged nozzle. Depending on where you live and what material you are printing with, moisture…
Made to fit a 40mm vacuum hose to an unmodified Hose Fitting from @PeterH's “Camlock Connectors with Magnetic Catch”. At the fitting side it screws in easily, at the hose side it is a bit more snug. If it is too snug, use the Offset Face…
This is my first upload and also my first 3d modeling attempt. It is basically a bolt and nut couple with a small gasket. The bolt has a conical hole in the middle and is designed to perfectly fit standard 4mm PTFE tube (for 1.75mm…
Streamline Passenger Car - Compatible with Dragon Railway This is a streamlined passenger car, inspired by the stainless steel cars used in mid-20th century passenger trains like the Chief . Scale and Size : While the original full-length…
This is an adapter for the Festool Domino Joiner (DF 500). It uses the CAMLOCK connector by @PeterH . Related: Festool Domino Cutter Rugged Case https://www.printables.com/model/710716-festool-domino-cutter-rugged-case CAMLOCK Adaptors…
For the Samla boxes from IKEA clips that have a different Fit dependend on how you would like it ;-) Best configuration to print is like shown in the 3mf file. I printed in PETG.
My design of the Burj Al-Mamlaka/Kingdom Tower in Riyadh Saudi Arabia I designed it in Fusion 360 but didn't get everything accurate because I'm not so experienced in 3D design but it's better than the others and will be updating it…
A simetric clip for Samla box 5-11-22 L. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Doesn't Matter Resolution: 0.2 Notes: infill not nesesari. Only perimeters Category: Organization
This is a 3D printable version of a light cover that's also commercially available. I saw no reason to spend $17 plus shipping for something I could easily make myself, and customize to my liking. It's sized specifically to fit the…
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Please give it a ❤️ if you like it 🥰 Dry Box DIY using an IKEA alternative to the Samla boxes Here is the video about it: Can be printed without supports and on an Ender 3 size bed (235* 235mm). You need to print : 2x drybox_base.stl 1x…
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
The standard SAMLA Hat by Beaverworks wasn't quite what I wanted so I made my own! This version sits flush (or as close as I could get it) with the top of the U1, It therefore also doesn't cover any of the sides. It also comes with half…
Here's my Spoolholder for Autorewind (THX for that greate THING ! https://www.thingiverse.com/thing:3252111 ) which fit into IKEA Samla Boxes. To store the Filament in dry and dust save condition. Included: 3-Spool-Version for a…
This cookie cutter cuts 7 big snowflake cookies and 12 small snowflake cookies at once! It's very handy when you need your cookies done fast but still looking cute. Excuse my poor render skills and the horrible stringing in my photos, the…
This is a model of the passenger coach, of the famous U.S. Amtrak Streamliner train. If you rotate the model around 45°, it is printable on a smaller printer like the ender 3. The models bogies can be equipped with standard axles of your…
Redesigned model created originally by Woogies This is an extension bracket for power plug used on Fractal Ridge case. With few different lengths you will be able to choose how much you want your plug to stick out. It is ALMOST flush with…
I love the gridfinity system started by Zack Freedman and the design idea of easy accessibility and of displaying the stuff that is stored, rather than store it away. But I felt that until now an easy way of transporting more than a few…
Remix of IKEA Samla Clip for 45/65l Box to fit to the 22l Box which is enough to store three to four 1kg rolls of filament. Redesigned it that it fits tight and can be assembled very easy and click on effect. I used eight of them and a…
I really appreciate the design from deweycat, but it does not fit the SAMLA box I wanted to use. This design also includes a stick to stack the trays without having to put them on top of the miniatures. It is high enough (more than 55mm)…
These are suction-end nozzles for the CAMLOCK connector by @PeterH . There are lots of sizes that can use to suit your needs. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle has 20 mm depth, 80…
Hello, I have been using my Samla 22L - All-in-One - Compact Dryboxfor for more than a year. The operation is still problem-free. Now the time has come to add silica gel trays and small improvements. I incorporated the comments and here…
Streamline Dome Car - Compatible with Dragon Railway This is a streamlined dome car, inspired by the stainless steel cars used in mid-20th century passenger trains like the Chief . Scale and Size : While the original full-length cars…
Streamline Baggage Car - Compatible with Dragon Railway This is a streamlined baggage car, inspired by the stainless steel cars used in mid-20th century passenger trains like the Chief . Scale and Size : While the original full-length…
I use 3D printed clips for all my Samla boxes, and I loved this one: https://www.thingiverse.com/thing:2110134 Unfortunately, IKEA has redesigned the lids for the Samla boxes, making that clip useless :( Luckily, I have modified it to fit…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
Like many others, I store my filament spools in IKEA Samla boxes. This container is designed to be attached to the lid of such a box using strong double-sided sticky tape. It holds approximately 180g of silica gel. You can close it with…
Simple passthrough the drybox. You will need to drill a 10mm hole in the wall of the box. Screw the PC4 couplings onto the outer part. I probably don't need to explain anymore :) Material: PETG or PLA (but PETG is better) Layer: 0.2mm…
MMU2S Ikea Drybox made by Jindřich Beneš is great. But why only for MMU2 users.. I don't have one (yet) So I printed one and find some things I want to do better such as the bearing, they are relatively expensive to the whole printed…
Improved model published: https://www.printables.com/model/1089528-samla-silica-container-v3 I decided to use IKEA Samla boxes to store my filament. They are stackable an can keep 5 to 7 filament spools (depends on the spool width). But…
This is a single shot magazine for the FX Dreamline that allows you to load the pellets from the left side. It works really good if you are right handed and have a pistol grip on your Dreamline. Keep your hand on the grip, cock with left,…
IKEA samla clip lock for 45L/65L boxes. I didn't like the original design of the clip locks for samla boxes so I modified it slightly. Now it is flat on top and is easier to unlock.
![Technology Themed [seamless tile] - Hueforge](https://media.printables.com/media/prints/522390/images/4225725_854f5b47-2750-48fd-b1ad-49b37f32fcba/photo_2023-07-07_22-53-49.jpg)
