222 modeli
Drill debris & dust recover, the cleaning solution Updated! Supports: No Filament: PLA Time: 46m
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
Prusa Mk4 Z Axis flat dust or debris or filament cover. This is a simple cover to prevent filament or debris from falling into the open holes in the tops of the z axis motors. There is no need to disassemble anything, these just fit into…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Prusa Mk4 Z Axis dust or debris or filament cover. This is a simple cover to prevent filament or debris from falling into the open holes in the tops of the z axis motors. There is no need to disassemble anything, these just fit into the…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This variation of the Nozzle Brush and Debris Bucket from @Alvomane came about as I wanted to use slightly different style of silicon brush than the original. So rather than just modify the brush holder, I modeled up both since they work…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement part for the rain gauge cone on the Davis Vantage Pro/2 weather station. It prevents debris from entering the rain gauge and potentially blocking the rain gauge. It sits directly on the bottom of the cone and can be…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Helps to prevent things from getting sucked into the Z axis screw drive and helps block debris from entering or damaging either side of the Z Axis mount. The purple box in this photo represents a 7mm/12mm or .25in/.5in adhesive Door Brush…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
With rounded inner edges to easily drag out “spaghetti” and other printing debris, failed prints and other stuff. I use a thin styrofoam base to eliminate vibrations
Wydruk około 5,03 €–6,15 € nettoWstępna wycena jednego wariantu
Print using filament or resin. For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm. Then glue the two parts together, followed by the legs. UPDATE 11/18/2025: I modified the de-icer legs to simplify gluing. Instead of gluing four…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
A custom replacement debris‑trap basket for Gaiger roof water collectors. Fits an 80 mm opening with 50 mm depth.
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Debris bucket (full length) for catching the wiped off boogers. This one is made to fit the wipers as designed by: I need one designs https://www.printables.com/model/725216-prusa-xl-silicone-nozzle-wiper-brush/
Wydruk około 3,44 €–4,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer. Print 4 of them. They block bits and bobs from falling into the pulley hole. You can glue them, or you can leave them…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Il me manquait cet élément pour terminer ma vedette de police. Impression en PETG avec filament clear. Hélas la couleur et la transparence ne sont pas là, mais la fonctionnalité est respectée J'ajoute le fichier fusion si vous avez…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print four of the parts (half-plugs.) Place two half-plugs opposite each other on a lead screw. Press the half plugs into the hole on the "Z-Bottom." Voila!
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This insert was made to hold a cheap brass brush head and allow easy cleanout of the debris bucket by Alvomane. Debris bucket for Prusa XL nozzle brush. | Auffangbehälter für Prusa XL Düsenbürste. by Alvomane | Download free STL model |…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
I notice that all the Debris that falls of the nozzle lands behind the XL and also on the Power supply and Buddy Box. Ive tried to find a good way to catch all the Debris of the nozzle, that come off when the nozzle parks. Ive tried to…
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
I created these early on for two reasons; cleaning out filament debris from the small cavity surrounding the leadscrew rotation area at the bottom of the printer was tedious. As well if any instance of filament strands or dirt getting…
Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…
Update Nov. 3rd 2024: There is a new improved debris bucket remix (Prusa XL Bucket for 16.5mm wide nozzle brush.stl with 16.9mm cutout) Update Dec. 12th 2023: When using the nozzle adapter and if the snap-in lugs do not fit properly (then…
Intro This is a 2 piece dry box feedthrough with threaded connection to 4mm push-to-connect fittings. There is a recessed area to add a piece of foam to scrub any debris from your filament before it reaches the extruder. Files are…
*It appears that Elegoo has changed the design of the bracket that these were meant to mount to. Check to make sure your bracket is the same length as mine in the picture or these will not work. Small covers that can be installed to block…
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
can be printed together the model needs to be glued together or separately in other colours the Beaufighter is very realistic Print in place kit card , Assembly required need to use a support
Inspired by Dustin Fickert's debris covers on Printables (@DustinFickert_397996), I designed my own version from scratch, incorporating several enhancements. While the original design was great, I wanted to tailor it to my preferences. My…
The Core One has a crevice underneath the side panels where debris can collect. I created a wedge that fills this gap to prevent that. Included is a wedge with no magnet cutouts and a few variations for common magnet sizes. If you use the…
If you have to drill something on a ceiling or looking upwards, this may help you by capturing the dust and debris from falling into your eyes. The f3d file can be opened in Fusion 360 to alter the dimensions if needed. If you liked this…
A small change to the original or remixed design. The lower part was cut away. This part is of no need at all to the functionality. Reasoning: A perfectly well running MMU2s still needs service. One of those services concentrates on…
Scale 1:42, but is designed to go with Captain Ahab's WW1 micro armor planes https://www.thingiverse.com/thing:4680918 Designed in Fusion 360 Same plane used in Battlefield 1
LAYER HEIGHT MUST BE 0.15 This is a fun and quick print.once done printing cut of the suport wall and it should be finished Have Fun!
These are bristles for the Adjustable Height CNC Dust Shoe for DeWalt 611 by Gage6917. It is very hard to source the bristles in Europe, so I decided to print them as well and it turned out fine. There are two versions uploaded, one…
Note: (Not sure why the base doesn't present in 3D viewer, it is present and works fine) Used to trap Bristle worms, a common salt-water aquarium pest. For the uninitiated, Bristleworms, have sharp spines that resemble tiny bits of…
EN: These are remix variants of martonas excellent revision of my original debris bucket . His version improves my design as it can be printed without support and hooked firmly into the 3030 profiles. It also stabilises slot-in nozzle…
This throwing axe is a safe alternative to throwing actual steal blades. Meant to be thrown at a bristle board, like one you would throw plastic darts at but with longer bristles. Might upload a printable bristle board later, I may not.…
This is a Roomba robot vacuum cleaner rotating brush or bristle holder for i3/i5 series. v1.1. p.s. For bristles, You can recycle old print skirts (or extrude some material). Cut to length, put in a bristle holder arm, and melt the…
Sick of debris being in flat bottom sink
I made this wrecking ball for my 2 ½ year old son. His favourite machines are excavators, cranes and trucks. Since he first saw a wrecking ball in action (TV) he talked a lot about this and so I decided to create something for him. This…
These prevent the little bits if plastic from getting into the crevices under the side panels. I slimmed down dancan13f's unibody models, removed the magnets, and added a lip and removal lever. Split into objects, flip them on their backs…
STLs include a holder for 1, 3, or 5 triangular brushes commonly used by Army Painter. These will hold the brushes without wobbling, pointing the brushes down, extending the life of the brushes and preventing damage to the ferrule.
If you're like me, you were disappointed when you realized Milwaukee's dust separator used a proprietary hose and connector that requires you to use their hose to connect to your tools. I have a festool dust extractor and want to use the…
I subtracted the profile of the remixed Prusa XL Tool Change Wiper / Brush to allow a low profile debris bucket to be used. It is a snug fit. So, first, install the bucket. Then attach the tool change wiper / brush.
We love this Jumbo Debris Pan and taller broom but there was no way to pair it with a broom so we modeled and printed this clip. Then snap in your broom and leave it standing for easy transport and storage. Items Jumbo Debris Pan - also…
This is intended for range use. I would not trust my mags with it in the field. Print standing up with no supports. Material and print settings depending on how robust you want it. Fasten pieces with 3mm shock cord. There is one back…
Update 2024/06/15: Added some updated files with better upper geometry for some magwells like Flycore, as well as an option for holes in the mag/cap that help retain the cap. You can use small screws or a piece of filament here. Update…
Glaxy Black PETG used with 0.1mm layers - the parts are so small the print takes no time and they are very visible so good to have a nice finish. They are a nice press-fit.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Mein Junge hat sich eine Abrissbirne für seinen Duplo Bagger gewünscht - voilá! 2x drucken, zusammenkleben, fertig! ich habe es in PETG gedruckt damit es was aushält. Möglichst leicht drucken, damit der Bagger nicht immer vorn über fällt…
Remix the Original Spoiler and added a Bin. Use a small paint brush to sweep or use your hand.
model i made for a guy working on a model fairey swordfish. it has a hole through the middle so he can run a motor through it.
Darth Tenebris Darth Tenebris was an ancient Sith Lord who vanished from the known galaxy long before the rise of the Empire. He belonged to a lineage of Sith that predated the Sith Empire and the Rule of Two. These ancient Sith were not…
Bristle Board Target For Catching Objects! Used as a target for catching “toy” throwing axes, arrows, knives, or anything that fits between the bristles. This is a 80x80x60mm board with 50mm of bristle depth. Print multiples and combine…
Inspired by Brisbane Tiny Doors series designed and created by local artist Mace Aragorn , I recreated a 3D and mini version of his first public tiny door (first version) using few old photos as reference. Dimensions: 122.8 mm height 68…
This insert fits wall plates that accept a standard-sized deco module (like a decorative rocker switch). The flexible bristles (printed with TPU) maintain a visual seal while passing cables through. Two parts include the flexible layer…
A one-piece model. Expand it over the 8mm smooth rod and slide it into place. Then I recommend wiping up the blob of grease that may be at the top of your smooth rod(s) to prevent it from coating the dust cover. It was designed for PETG.…
We brought our 3D printed “bristlebots” to MRRF 2023 and wanted to share the files so others can make them. This is made on TinkerCad so kids can have fun designing their own feet and cases! There's a baseplate for holding batteries,…
I liked this debris bucket but needed a larger hole for the nozzle brushes I was using. https://www.printables.com/model/725216-prusa-xl-silicone-nozzle-wiper-brush
Just some weapons from Christopher Paolini's Eragon series, like Zar'roc and Brisingr. If you'd like some more weapons from this series, please comment or message me and let me know!
Print with supports. I used PETG. Just hang this like the original. Make sure the notch (which is not centered) aligns with the nozzle brush. OpenSCAD file provided for further tweaking. This needs the original .stl file downloaded and…
Mainboard Fan Cover for Creality Ender 3 Features Organic generative pattern Flanges for better airflow direction Curved channel for smoother airflow Print Settings Printer: Creality Ender 3 Filament material: PLA Resolution: Default or…
Glade Brise One Touch Dispenser, this is a remix of Robbys work. Great design, Robby! I just adjusted the cap to make it work without any original parts. A M3x20 screw is needed along with a M3 Nut.
Remixed in Maghex, Adjusted the size of the model a bit so it could swallow the magnet underneath. Updated version 2 as I accidentally found out that ball-shaped holes work better than the original one.
I saw some bed debris shield that required installation and because I hate manual labour more than Jeremy Clarkson I designed my own that stays in place with magnets. This model uses 6x3mm magnets.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
prusa XL debris bucket for A1 mini silicon brush tool wiper
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This air intake debris filter fits all stock air intake cones for Jeep Wrangler TJ model years 97-06. It likely will fit many other Jeep models and years, but I have only tested it on that specific one. This part is a simple safeguard…
Creating a new mix for Baby Groot to blend in as a daily usable print. Combo of the following models: 3D Printable Baby Groot by Byambaa Erdene (myminifactory.com) Scatter Terrain Boulder by Seaborne-Studio - Thingiverse Mixed together…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Mrs. Brisby : Meeting Great owl : Secret of Nimh
This is a box for Briscola's card. Print parts in the color of the file name. The top part of the body need support. For a faster print of the body print the top part of the body upside down with supports. Use glue to glue parts to the…
Card dispenser for the gaming Table Bristol from Geeknson, and maybe for other gaming tables from Geeknson. Version “mini” max size for sleeved cards 46x71 mm Version "normal" max size for sleeved cards 66x91 mm Version “large” max size…
This gasket/shield fits around the blue collar of the KAD short shifter for a classic Mini and is installed between the gaiter/gaiter ring assembly and the floor. I intentionally left off holes so you can make your own to fit your…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Print with 0.4mm nozzle and 0.2mm layer height. Trim bristle to length and preference. Handle may print cleaner with supports.
Debris filter pan Flusensiebwanne Two easy to print parts / Zweiteilig Pour Spout / Schnabel = 67mm ~ 2 11/16" Height bottom to inner pour spout diameter / Höhe Boden bis Schnabel innen = 68mm ~ 2 11/16" Maximum volume / Maximalvolumen =…
This model is compatible with the lego system.
ne pas oublier de mettre un support et les réglages sont les même que notre ami Surfalex2000 le créateur n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Shorter bucket that will not catch the bed when it's homing
This is a remix of Donutcat's Hubris mag, sized down to be able to sit on a Bambu printer with a 256 x 256 x 256 print area. Please use the mag follower, mag cap, and other parts from the main Hubris listing. The particular Hubris model I…
Printing and Assembly Instructions Print the bristle (5 copies) with TPU. Use the "thin" version for harder TPU and the "medium" for softer. I haven't made a thick version, as I don't think it will work with extremely flexible filament…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
a filter designed to stop rocks and sticks from going into our pond drain tube slips over a one-inch pipe I printed this in resin cause of the many holes but you may people able to do it on an FDM printer
For the Prusa CORE One, I created a small plate/sheild to help prevent debris from accumulating into the Z-Axis motors. When designing the plate, I made sure the plate's height was lower than the Z-axis mounting screws as to not affect Z…
Why stop at individual buckets… I decided to make one great big one based off the extended low profile debris buckets I made. One large bucket will reduce the number of debris ricochets as the nozzle passes over the nozzle wiper. This…
An update on my singular bases I’ve decided to stop with these singular base uploads. They are getting so numerous it’s getting cluttered, it's difficult to find the one you want, and the uploading takes ages so I can’t do as many as I…
This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…
I created these early on for two reasons; cleaning out filament debris from the small cavity surrounding the leadscrew rotation area at the bottom of the printer was tedious. As well if any instance of filament strands or dirt getting…
The dual gear extruder has the tubing adapter 10mm higher, so I moved the motor mount over to compensate. Other things adjusted: Added a hole to be able to adjust the gear tension spring Moved cable chain mount over and up a bit to…
Dometic Brisk AC duct for the old version (DuoTherm/ Brisk) that actually directs the airflow to the ceiling ducts, instead dumping into the plenum area, and leaking into the surrounding area, or back into the evaporator. This is a work…
This is a 40mm fan to 5015 fan adapter. Please be awere not each fan has the same mounting holes. These are the fans i am using (including a drawing with sizes):…
As always, thank you so much for looking at this and please leave a like/comment! So I got the idea from someone else, but, I improved it to use less plastic and space, and best of all, it has a placement for your thumb Category: Hand Tools
Update 3. December 2025: Added versions without debris filter. This model is a replacement of the acrylic top vent grille. There are 8 variants available, 4 are designed to prevent debris/parts from falling through the upper ventilation…
This object was made in Tinkercad. Category: 3D Printing
Taken from in game files and cleaned up for printing. Bridget Brisket Bucket Bracket Banquet Benchmark Bus-stop Brakelight
This is a pet brush primarily for dogs and prints in about 2 hours
Print the Bristles first with flexible filament and then insert them with pause at layer height codes in the Body. The bristles will easily press into place. Glue stick or letting the flexible parts warm up on the build plate before…
Impostazioni di stampa: Layer Height: 0.16 Ironing Type: All top surface Sparse Infill Pattern: Adaptive Cubic Altre impostazioni: default di Orca Slicer Tempo di stampa: 2h 14m su Creality K1C con PLA HS.
Bonjour , j’en avais marre de faire tenir cette carte à l’aide d’un scotch alors j’ai tenté ce petit fichier . Il n’y a pas besoin de support , une fois que vous avez fait l’impression coller un double face sur la base et coller au…
![Pond/Aquaponics debris filter for large to small debris [Fits over one inch pipe]](https://media.printables.com/media/prints/198141/images/1831882_c9390d63-20f4-48a8-aa70-33b0e6deecdb/20220506_221036.jpg)
