Liczymy pasujące modele…
Support my work +++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++…
Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…
Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.
Fits Canoe paddles by handle or paddle Garden tool shafts up to 35 mm Garden tool heads (shovels, rakes, etc) D-shape handles Conveniently, it grabs most rubberized garden tool handles … Design Bore diameter is 35 mm, which should be good…
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations. In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys Available…
A rear lens cover for Canon Lenses. If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal. No support…
This is a collection of 3d printable caps to replace the metal ones on a Canon New F1 WARNING: THE PLASTIC PARTS ARE FRAGILE, YOU NEED TO SCREW THEM IN GENTLY WITH THE LARGER TOOL YOU CAN FIT. Otherwise, you'll have to dig plastic out of…
Fully wrapped hotshoe cover, 0.15 ply height, PrusaSlicer slicing. No support required, slow printing speed. When pushing in the hot shoe, you will hear a "click" sound, indicating that it has been installed.
Recently I've designed bellows for macro photography using 3d printed parts, 200 mm of 2020 v-slot profile, some hardware and a EF mount scavenged from a broken lens. This design is basically a copy of the original brass mount with a…
low height Canon FD bayonet lockring to have aperture control without a camerabody or bulky adapter. Not intended for adaptation to a diffferent mount just for iris control. Made this originally to get aperture control for a MTF analysis…
Silhouette Teschio messicano da incollare al muro. Misure: 16,3cm x 11,3cm sp.3mm Stampato in PLA
This Can and Phone Holder is designed to fit a can with a koozie <85mm. The phone holder slot is also 85mm in length and 15mm in width. It fits my Samsung Galaxy A32 with the case perfectly. My print of this variant of the design was done…
The STL file does not have the text on it. The gcode has (using prucaslicer).
Another accessory for Vit Budina's Ford Raptor. I used snug supports.
Fix for the still not fitting version. Now working for DSLR like 80D,70D,60D,… Settings Value Infill 15% Perimeters 2 Layer Height 0.20 mm Material PETG (PLA) Supporting Material only on surface / bed Comments printed on MK4 with MMU3…
Canon's 10x42 L IS WP binoculars are wonderful binoculars but the lens caps provided are terrible. They're difficult to put on and come off way too easily. They also come with a lanyard which is supposed to make them easily useable, but…
Makers of all sizes, need a good printer.
For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
these paper roll holders fit into the original recesses of the Canon P39-D calculator on the back. They probably fit other models as well. To print them you will have to use supports. I added the g-codes including supports as well
My son needed a missing part for his Meccano Junior Kit. This is a PLA version.
Wanted some protection for my spare LP-E12 Battery (Canon EOS M50). Inspired by the case of @tomschoenlau I made a modification of his “Battery cover Canon LP-E17”. Tested with an original Canon LP-E12 and a hähnel HL-E12 (printed at…
Description: A simple and practical sun hood for the Canon XF605 camera screen — perfect for outdoor shooting when sunlight makes it hard to see the screen. This 3D printed sun hood snaps directly onto the monitor frame and helps reduce…
The Flite Test Sea Duck is one of my favorite planes but I find the opening in the top rather small and inconvenient. This requires a slight alteration to the plans. I basically hack off the front of the foam board canopy and put this in…
Hi all, just sharing here a small hook I designed to fit an outdoor shed I recently built but which lacks options to hang accessories. Initially designed for the Palram Canopia Rubicon 6*8 version but I suspect it works for others which…
This volcano-shaped vase features the popular Voronoi pattern, giving it a geometric and modern look. It’s perfect for home decoration or as an artistic piece. The design requires supports to preserve the details during printing. PLA or…
Protective body cap for Canon RF mount cameras. Designed to cover and protect the camera sensor and lens mount when no lens is attached A simple and practical accessory for storing, transporting, or protecting your Canon RF camera body…
I designed this container to hold the original sizes for the E3D volcano nozzles. It has a model of each nozzle at the head of each row so that you can identify a given nozzle and store it. Four rows are provided at each size to allow for…
This is a model, which shows beautifully how the caldera erube works.
Gauge to ensure a canoe slalom boat meets the ICF rule "3.2.4 - All boats must have a minimum radius at each end of 2 cm horizontally and 1 cm vertically." One version with logo from Potomac Whitewater Racing Center, Bethesda, Maryland…
The cardboard packaging that these fruit cups come in is the worst. You can't get one cup out without breaking the package, and then the remaining cups tend to fall out. This boat-shaped tray solves that. I suggest printing it in Spiral…
I have included 3 stl, and 1 g-code for the mk3.5. lay out should be as g-code for a strong hold but should be able place flat so that retainer piece points up. the picture provided is a mock up, since i dont have the actual retractable…
…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal…
Hot shoe cover designed to fit Canon EOS cameras perfectly. A variant better suited for Canon FD cameras can be found here . Print Settings Resolution: 0.1 mm Infill: 100%
Two seats canoe in 1/10 scale with paddles
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
Added more sizes to Wojtek's LP-E6 battery holder. Should be able to print without any supports in the provided orientation.
A lens hood for Canon EF 50mm f1.8 STM lenses. Can be used both as as hood and as a protective case. Print Settings Resolution: 0.1mm Infill: 100%
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
This is a printable model of the mount found on Canon EF/EF-S lenses, which you can use to design accessories like extension tubes or custom lenses. Print at 0.1mm layer height, in PETG (recommended) or another filament like PLA. This is…
Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
In Egyptian mythology, Duamutef was one of the four Sons of Horus, tasked with protecting the stomach of the deceased. Represented by the Jackal, he is the guardian of the East. This model is a stylistic recreation of a museum-style…
This is a Volcano with base for the Vinegar and Baking soda and dish soap experiment, I have included holes for TPU printable feet and Plug for the bottom (10-15% infill, recommend raft for TPU feet) . For the volcano, I printed it on the…
2023-09-12 version 3: moved the probe so that it can be adjusted without disassembling the entire shroud. Added both the Bambuslicer and the stl files. Lately I attached a heat sink to the front servo (https://amzn.eu/d/e68hmoo) because I…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm
I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria: Gridfinity compatible and stackable Compact with maximum storage capacity Designed for Ankermake nozzles This bin will store 16 Ankermake nozzles…
scale 1/72 On my cults page you can download planes like this one on a larger scale and detail, they are for sale for 10 euros https://cults3d.com/es/usuarios/ivangonzalezm/creaci%C3%B3n missing rudder parts included excuse me After…
A simple island style boat/ canoe with rounded sides and flat bottom. No support needed.
Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!
Thanks to the amazing work from the Voron team! I added a printhead for the Volcano variant of E3DV6. It is a simple extension of the part cooling ducts from the original Voron Stealthburner E3DV6 printhead. Not the nicest looking mod…
A Duct-Extended v6 Printhead for the Stealthburner The Voron Stealthburner toolhead includes a printhead module that is compatible with a standard v6 hotend. In this mod I attempted to replicate bythorsthunder's mod for the Stealthburner…
Proper clearance, lens orientation and flange focal distance. Tested with Helios 44M-4 and Beroflex 135mm F2.8.
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Rear lens cap to suit Canon EF and EF-S lenses. Print Settings Supports: No Resolution: 0.2mm Infill: 100% Filament: Plasty Mladeč PLA Black Slicing settings: Perimeters: 2 Seam position: Random The cap has three internal flanges which…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
A perfect day in Printer Island is about the be ruined by an eruption of Mount PLA! https://www.youtube.com/watch?v=3cVqtMMg_AE This thing is a volcano, which uses an LED illuminated ultrasonic mist generator to bring it alive. Assembly…
I suggest ordering the unassembled or Low Profile variant of beacon, or you may run into clearance issues. You MUST edit your config to make sure you don't hit the probe on your rear Z-axis lead screw constraint! :) 3.17.23 Update v1.3…
T-ring adaptors for 2" and 1.25", should work on any telescope. The adaptor if of the EF type, it should work on any Canon EOS cameras.
Сопла, крышка, подсветка, съёмные, для удобства печати и уменьшения нагрузки. Для термобарьера толщиной 27 мм. Добавил версию, с повышенной жесткостью, вторыми креплениями для вентиляторов, и немного укороченными соплами. Изолировал левый…
Modified Tri horn duct for better flow with volcano hotends. Tested with Phaetus Rapido UHF and CHT Volcano nozzle Update 05/10/2022. File models fixed
This is a printable body cap for FD mount Canon cameras, such as the T50, T70, T90, F1, A1, AE1 and others… I modeled this cap after an existing cap. The print is not quite so simple, as the guides for the bayonet catch have a slope. I…
For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your…
Adapts Canon EF/ EF-S lenses to Sony E-Mount bodies. That is all, no lock, no frills.
Update Feb25: Thanks for almost 300 downloads! Full Step Files available for Purchase from my Printables Store Here - perfect for alteration and customization. Free STL Files for 3D Printing below: Set of Modular Lens Cases, Protection…
### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…
This is a hood for Canon kit lens. Three models are included, rounded hood, petal hood and a base that you can use to design your own model. f3d file is included.
…Please at least be sure to hit like & post a make, I'd love to see your prints! Use volcano nozzles in your sv06 plus. DONT LEAVE A BAD REVIEW BECAUSE YOU DID A BAD PRINT! Like the single reviewer here! That's just not cool. It’s…
The Embraer EMB 314 (A-29) Super Tucano, Brazil's answer to a light attack CAS aircraft. It is a highly versatile and low-cost turbo-prop powered craft, can be fitted with a vast array of munitions, and is operated by nations worldwide.…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
A convenient way to store up to 5 Canon LP-E6-style batteries on a 1x3 Gridfinity plate. Related model for the LP-EC Canon Charger .
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
We have templates for both male and female pairs of the RF mount. They fit my camera and lenses without further modification. Having done this, I belive it is possible to have a mount that fits both RF and EF - you just have to cut a bit…
If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…
A connector piece between your Canon camera and your tripod. Incase you loose it or if you need a replacement piece. Made in Fusion 360
Main features: Stairstep pattern on the inside to further reduce flaring (mimics the original, was a pain to model) Clicks when fully twisted onto the lens Can be put on backward for storage and trasport Has the same markings for…
Thanks to the linked makers I was able to merge them and to create this EF to M42 lens adapter. It works well for me but it is possible to improve it. If you printed the design you have to drill a hole at the spot where a camera lens…
Miminal box for 20 nozzle volcano with interlocking closure. The top cover has a small offset and fits snugly with the bottom.
Volcano fan shroud for MK3s+ This is a meshmix of the mk3s+ fan shroud to work with Volcano Hotend. I have not found a volcano shroud for the mk3s+ so I remixed one from the original Prusa fan shroud. print in ASA or ABS! (PETG and PLA…
The MAK Vector Duct Features: Open views of the hotend Easy maintenance construction for easy nozzle changes Fully enclosed 5015 fan for style Cable management arm Solid carriage mount Still a work in progress. More extruder options and…
The Canon EFS 18-135 Lens is a very good lens, but it does not come with a hood. I tried several different models that others had posted, but none seemed to fit the bill, so I made my own. This model is reversable so it will store well.…
Canopic jars were used by ancient Egyptians to store and protect the mummified organs of the dead. The four sons of Horus, depicted on the lids, are jackal-headed Duamutef who protects the stomach, baboon-headed Hapi who protects the…
Remix of "A hot shoe cover designed to fit Canon EOS cameras perfectly." by JP that does not block internal flash.
lightweight and easy to print. correct flow direction adjustment ability no supports needed for fan fastening you need to cut m4 thread in hole. i used self made m4 tap and m4 x 20 screws. use standard print settings. don't forget to…
BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…
With these files you can now directly attach your camera as a normal observational eyepiece, just tighten them in your 1.25" or 2" eyepiece holder. NOTE: If it doesn´t fit well for your telescope, maybe you can play with the tolerance of…
The best can holder! Has a super snug fit and prints really nicely. I made mine out of PLA but I'm sure ASA would be perfect for the UV resistantance. PRINT SETTINGS: -No supports needed -0.2mm Layer height (Not too specific. Really…
Behold The Volcano iPhone stand! This iPhone and mobile phone stand came out of one basic question: -How can we design a phone stand that has built in three most usable angles for a mobile phone, and doing that in a simple and iconic…
This part is designed to be printable without any support material. A well adjusted printer is necessary fo a tight fit. Extension tubes are mainly used to reduce the focus distance of a lens for macro photo. The sample photos are taken…
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…
25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30
Floats like a dream too! Designed originally as wedding favours, this canoe is great for any canoeing or outdoor enthusiast. Printing instructions: With an MMU or other colour printer (or if you want one solidly coloured piece), choose…
Print model in PLA and plug in TPU
![BetaFPV C03 camera mount/canopy [Improved Complete Set]](https://media.printables.com/media/prints/5388c6c5-f443-476e-a91c-2cb185f211f6/images/11110340_e9dbe0a0-128d-4b63-b2fb-100d6291ac5f_1c42e2f3-7b8f-4de9-a9d5-c1a2f3042f00/screenshot-2025-11-08-212802.png)
