Lack Extra Table Couplers
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
- Pobrania
- 769
- Polubienia
- 93
- Ocena
- 4,82
Liczymy pasujące modele…
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Remixed from dual version: https://www.thingiverse.com/thing:4273415 IG post: https://www.instagram.com/p/CHvzaRlB7cl/
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
Designed some 3D printed Oldham Couplers for my Ender 5 Plus. The ones available didn't match up with the bolt pattern on the 5 Plus' lead screws. Suggest Printing at 100% infill with 0.12 layer height and 4 walls. Uses M3x8mm to attach…
Mod for the amazing pico MMU from LH exchanged the ecas to ptfe couplers
A small adaptation of the great low-friction bowden/PTFE-tube Y splitter by BlindMaker . This remix adds an M3 slot flange that allows to fix the splitter on the rear side of the Bambu P1S (the X1C should work as well), using an M3*10…
The original model was split in 2 parts, which is not necessary, if you have a 300mm printbed. Also, the original is a little too short, so that the eibos lid fits only with force. I added 1mm of length and chamfered the top part. Lastly,…
I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…
I will be adding more in the future with some additional edits to existing ones. This is an expanded variety from my previous upload. I made there specifically for some tools that have clearance problems or smaller diameter size dust…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
Updated Oct 20, 2025 Description A simple coupler to connect two sections of PTFE tubing via two PC4-M10 fittings. I'd downloaded some to try but the threads were too large to take the couplers I have, so time to whip up my own. The…
Excellent Design. No threads to match and a built-in funnel - BRILLIANT !! Check out the original designer's in depth description. https://www.thingiverse.com/thing:2892179
This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…
Uses 3 M3 bolts and 3 M3 nuts per pair. I usually run two pairs per set of mags, just to keep them from wobbling. Works well with straight talons, tachis, and kodas. The magazines are turned 180 degrees from one another that way your…
This is a remix of Chance's Talon Mag Couplers (which are also compatible with Tachi and Koda mags) to face the same direction. I appreciate the intent of the original version which lets the mags face opposite directions so that the…
A few woodworking couplers for the DIY minded. 4 inch dust collector main hose coupler. Coupler with reduction to 2.5 inch Coupler with reduction to roughly 43.5mm 4 inch to 2.5 with a 45 degree sweep 4 inch to 1.5 4 inch to 2.125 Use…
I couldnt find a duplo cart that had any couplers. My kids like to play with Duplo trains. Added couplers and adjusted the wheels to a decent fit. The original model didnt have couplers nor did the wheels fit properly. You might want to…
Handy and strong PTFE couplers that use the common and reliable collet clips seen on extruder housings. Join two pieces of 4mm OD, 6mm OD, or adapt 4mm to 6mm OD. Quick print and super handy for extending your filament run or converting…
I am going to be running the filament from dryers above the printer. I like GavinOracle's remix of the INDX filament sensor top to add PTFE couplers but my PC4-M10 PTFE couplers use a 0.9mm thread pitch. I remixed it to update the thread…
These are couplers for splicing US sizes of sump pump hoses together. In the hardware store they are less than $2 a piece, but i couldn't find any so had to model some up. They are designed to be a tight fit with my hoses so you may need…
GO HERE FOR UPDATED MODELS AND MORE SIZES https://www.printables.com/model/332587-dust-collectorvacuum-hose-couplers-variety-for-bos I designed this a while back for myself but decided to upload the files for others if they need it. If…
Remix of Derrick's oldham coupler mount with the manually adjustable Z. This is for anyone not on triple-Z.
Mega Mods Collection for the Voron Trident R2 (Everything already tested and safe to print and use) Since I always heavily modify my Voron printers, I've decided to upload all of the R2 mods I've designed so far in one package. Every…
My macro lens needs this to fill the frame better so i modified the 52mm lens adapter and other parts to be much shorter
I created these for 2.5" hoses, and use them for fume extraction for FDM and resin printers. In my case, they attach to an inexpensive inline fan to vent any fumes outside. Hose I use: https://www.amazon.com/dp/B07BFSB2BW Clamps:…
3 types of flexible Portable Air duct couplers are attached suitable for joining 130mm OD PVC concertina pipe. (Pipe size is used for my Delonghi unit... there are other diameters used by some brands). The extra 2m duct I ordered (non…
So i built a wall PC which used many different materials and components which would normally not fit together, 3d printing to the rescue! This pack of models are all the models used to complete the build, there are a couple of models…
This is a set of magnetic couplers to temporarily attach six-inch (6in aka 6") flexible ducting in a way that is easily removable or transferrable between different flow paths. These are suitable for various applications, including: dust…
Numbered couplers for joining 4mm PTFE tubes using PC4-M10 pneumatic fittings. I use these to connect tubes from my dry boxes to my MMU2S buffer.
the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”
HOn30 ore car with no couplers. Use Micro Trains 1015 couplers
2020 extrusion Couplers. Just use some T-Nuts and m3 x8-10mm screws to join the coupler to the extrusion.
Update - 8/5/23: Should work now expanded the holes to allow for more coupler movement, and fixed the rear hydra arm connection to the rail. You must use button head screws to attach rear to rail. If it still isn't working don't hesitate…
These couplers are printed on the narrow side down letting the plastic span across without using supports and giving linear strength. Like nearly any coupler, there will be a certain amount of bowing at the connection. These couplers fit…
My original plan was to use 4 of these isolators between a platform for my vinyl player and a table, but I didn't finish the project. Should work with any squash ball, I tested using these .
Z motor coupler, solid. using two, 25mm M3 bolt and nut. 2 different versions depending on your needs. Grab some extra M3 nuts and bolts here: https://amzn.to/2Y12Xsc. (affiliated link)
Mod for the pico MMU from LH. Inward PTFE tube coupler is M10 version, outwart PTFE tube coupler is M6 version.
A set of couplers and corners for a 2020 aluminum profile
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I have previously made a filament bypass using PC4-M6 PTFE connectors, but sometimes its difficult to thread filament through two back to back connectors, so I re-designed it to use proper PTFE couplers. This model is…
After some brainstorming and wanted a alternative for a bulkhead i came up with this diy bulkhead this should be as efficient as a normal bulkhead though using existing pvc couplers since bulkheads are not available where i live this…
Print standing up, any layer height. For better epoxy/glue adhesion, I recommend roughing up the outer surface with sandpaper. The thick couplers are 1 mm thick, the thin ones are 0.5 mm. Wood glue not recommended.
Minimalistic PC4 Couplers (M6/M10) w/ Mount/Holder No Supports Required Thread PC4-M6 or PC4-M10 pneumatic connectors on each end to create a PTFE / Bowden tube coupling point. PC4 Coupler Holder_Mount.stl is a mount/holder for 4x…
My take on a filament bypass. It uses two M10 (10mm diameter) Bowden Couplers ( like these or see last picture) and borrows the mounting from the MMU3 so it looks nice and tidy when next to each other (my pictures show a MMU2S, hence the…
I liked using the PC4-M10 Bowden couplers in the 2025 dryboxes and I wanted to stick with them. The JurB's remix used a separate piece that needed to be glued in, which I did not like. So I added threads directly into the lid itself.…
They utilize a 4in hose with various machine size fittings currently sized for 120mm Dust collection port for my SCM minimax cu300 more ports will be added as I design them. Step file included to resize as desired uses 6 9mm x 3mm magnets…
These are helpful couplers for joining rocket parts together. I try to stock parts for scratch-building my rockets and cardboard couplers are much lighter. However, I am also cheap and since I have the 3D printer, I use it when it makes…
Mine are printed in PLA and have been through negative temperatures and harsh use, they were fine. If you really want them to last PETG is probably perferred but its up to you. Required hardware: 3x M2x5 Connectors - 2 Pins…
The instructions are the same given by @Frittenpit and @PeteR_175893 , Its necessary to print center bearing block assy.stl
Single caps are helpful if you want to space out the tubes more, while the cluster can be helpful if you want the tubes to be close together. If you have spools of filament for an MMU on a spool holder rail below the table, it's helpful…
Originally I remixed GunplaMark's 2025 coupler cap to attach to my drybox similar to his FS2026 container plug . Unfortunately, the cap did not hold TPU very well when using an auto-rewind system. Luckily, I found Phil Caruso made a remix…
Two pieces to combine builds with both starlink and v2 round pegs. I needed these for an organic cave like system to a structured underground dungeon. Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator Rafts: No Supports:…
Screw on hose ends for most garden hoses. These were specifically designed for use with chlorinated pools. Standard brass or copper fittings do no mix well with chlorinated water. The chlorine will eventually break down the copper, and…
Motivation I recently created MagDuct - a Parametric Magnetic Ducting Quick Connect System. In the process, I realized some people may need or prefer non-magnetic adapters and couplers or they simply need additional or replacement duct…
This allows the PTFE tube inside your enclosure to remain undisturbed when you make modifications above board on top of the enclosure.
This is a remix of a remix of Chance's Talon Mag Couplers. These couplers can hold up to 3 talon geometry magazines vertically and parallel to each other, facing the same direction. Uses 4 M3 bolts and 4 M3 nuts per pair. (How has nobody…
Overview This is a clip set designed to hold off-the-shelf PTFE tube couplers commonly sold for Bambu AMS systems and similar filament routing setups. The set includes 4-clip and 5-clip versions , allowing multiple PTFE tube couplers to…
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open . This over-engineered lid system uses the spool's center hub (plus a…
!!! The BEARING SEATING is at 22.1mm, it is recomended to print a fitting test before!!! ONLY FOR 20TOOTH PULLEYS, NOT STOCK ONES BOM for each of the towers: top to base: 3 M6X25 Screws ; 3 M6 heat inserts motor to stock support: 4…
print with whatever you want, I did with ASA voron settings, less thinking.
A couple of connectors for 16 x 8 mm (0.63" x 0.31") half-round PVC 'micro' trunking (raceway for US readers), as made by D-Line, and ideal for discreet cable runs. I've mimicked the groove where the branded trunking clips together for…
Bowden couplers for Trianglelab's filament runnout sensor. Filament runnout sensor :…
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
I've found myself disconnecting and reconnecting PTFE tubes more times than I care to admit. Often it was to extract some wayward filament, but sometimes it was because I sliced a print to use filament #2, but this time, I want to use…
This setup is designed for a standing desk. But it also works well to just put it on your lap while sitting. The base gives my writs a comfortable angle of zero degrees while the ZSA Platform is still at its maximum angle.. :-) The spacer…
This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original Prusa motors (with integrated rod), it works fine, but when you have steppers and Z threaded rods connected using…
Hose Couplers are used for Watering on 1,2 or 3 seed beds with one pump. It fit to 25mm, 20mm and 13 mm hose It can be used with my model Zavlažovací Hlavice (Watering Head) Printed from PETG 40% infill 0,2 mm layer
This was a quick design I slapped together but it works well. As long as your cardboard tube has clean edges they should slip on. This will work with cardboard tubes from things like rolls of painters tape, packing tape, or bubble wrap.…
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that…
I have done this rmix to be able to have ,M6 PTFE couplers on both sides
quick edit i made to increase the size of the cutout, as i wanted to use one of the screws from the P1P ptfe coupler
204mm flatline and 100mm flatline ducting couplers and end caps to allow fitting a MVHR around the home with off the shelf pipeing
This setup is designed for a standing desk. But it also works well to just put it on your lap while sitting. The base gives my writs a comfortable angle of zero degrees while the ZSA Platform is still at its maximum angle.. :-) The…
Mod for pico MMU from LH exchanged the ecas to ptfe couplers
9 port slot for my Grandstream switch
Say goodbye to awkward, overtightened hose clamps and messy tape. This functional coupler system is engineered to join two 2.5” or 4” flex hoses directly and securely. The ingenious two-piece design features two identical threaded coupler…
If your Roco Clean model train car couplers broke, you can now print new ones! Print with supports. Please remix if you have any improvements! CAD file included. Terrible buffers are included as bonus.
VACUUM SOCKET COUPLERS — DIMENSION-BASED, NOT BRAND-SPECIFIC Three female-to-female couplers for rigid plugs with measured outside diameters of 32, 35 or 38 mm. Internal receiving bores are 32.4, 35.4 or 38.4 mm (0.4 mm diametral…
M3 offset couplers to mount a Terasic DE10 to a JammASD. Modelled with 4.1mm holes which should result in a 4mm hole after shrinkage etc to suit M3 brass inserts that have a 3.9mm lead. These are the inserts I used >…
Design Concept These couplers are created to connect brio-style trains, enhancing versatility in train play setups. There are two types of couplings. First is classic but with more endurance, second is new type. In that is not necessary…
Nozzle: 0,6 Material top: F10113 DASFILAMENT Material bottom: F10104 DASFILAMENT 2 holes to mount the cover (threading M3) 2 holes to mount the case (through hole for M3) Discussion:…
This adapter attaches to the face of the INDX filament sensor and allows you to connect reverse Bowden tubes via PC4-M10 fittings. But instead of those fittings screwing directly into the adapter, each is screwed into a separate magnetic…
if printed in the correct filament, it should be perfectly friendly to the outdoors. most if not all of these are NOT thoroughly tested. so use at your own expense. the cylinders in the photos should be hollow (aka a hole through the…
Kenwood SB050 smoothie makers uses a drive-coupler to interface the motor shaft to the cutter assembly and when this component fails it can no longer be purchased as a spare. This model was designed to replace the worn out drive-coupler.…
A three-part hands-free dog tennis ball thrower with threaded couplers, a 65 mm ball cup and a wrist strap. Free, multicolour 3MF. PRINTING: 0.2 mm layers, 3 perimeters, 15 percent infill, PLA. No supports needed. NOTE: Slicer-checked in…
Overview This is a custom-designed internal mounting tray (modeled in Shapr3D) to install a complete DIY PiKVM v2 hardware stack directly inside a PC chassis. Originally built for the brushed aluminum Lian Li PC-8FI mid-tower case, it…
I designed a number of connectors with to make decorative fencing, railings and ladders etc. for use with the fischertechnik construction system from 6 mm hose. I'm pretty sure there are many other applications for your own projects. Some…
Mod for the pico MMU from LH. Inward PTFE tube coupler is M10 version, outwart PTFE tube coupler is M6 version.
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that…
This is my first ever functional design. I'm definitely not an expert, I'm still learning a lot about 3D modeling and printing, so this was a big practice project for me. It might have some small errors or issues, but it’s working pretty…
To secure the computer to the mount, you need two M4x6mm screws. There are options for 2 couplers, 1 coupler, or no couplers. The model can be accessed on OnShape here .
Design Concept These couplers are created to connect brio-style trains, enhancing versatility in train play setups. There are two types of couplings. First is classic but with more endurance, second is new type. In that is not necessary…
These NEW over-engineered Prusament spools are just so versatile! They normally assemble with bayonet-style twist-lock sides that require a 3D printable tool to open . This over-engineered lid system uses the spool's center hub (plus a…
Numbered couplers for joining 4mm PTFE tubes using PC4-M10 pneumatic fittings. I use these to connect tubes from my dry boxes to my MMU2S buffer.
Bowden couplers for Trianglelab's filament runnout sensor. Filament runnout sensor :…
Print standing up, any layer height. For better epoxy/glue adhesion, I recommend roughing up the outer surface with sandpaper. The thick couplers are 1 mm thick, the thin ones are 0.5 mm. Wood glue not recommended.
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
Quick and reliable prints for coupling two pieces of PTFE of either the same or different dimensions. Versions for 6mm or 4mm OD tube included. Requires 12x3mm magnets with 4mm interior hole and molded retainer clips. Non Printable Parts…
STILL TESTING! The front two joints are easy to replace. The rear is a bit of a pain. You must remove the large gear in the bottom compartment and lift both the linear rod and lead screw. This is easily done with the rear panel off the…