16 002 modeli
Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…
Wydruk około 3,65 €–4,46 € nettoWstępna wycena jednego wariantu
Outer Dimensions: H: 44mm R: 38mm Inner Dimenions: H: 35mm R: 30mm Print Settings: 0.08mm Layer height 3 Walls 8 Top and Bottom shell layers 45% infill Fuzzy Skin with a modifier so it doesn't affect the outer thread → Contour with 0.3…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Wydruk około 3,59 €–4,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…
Wydruk około 5,87 €–7,18 € nettoWstępna wycena jednego wariantu
Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena jednego wariantu
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Wydruk około 3,60 €–4,39 € nettoWstępna wycena jednego wariantu
This is my take on printed anchors. I designed them for use with XPS foam from which I made an enclosure for my 3D printer. In combination with wood screws an washers they can be used to hold together foam boards or mount things like…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
This is a remix of a model by @LoboCNC . The original screw holder is quite universal: it fits many hand screwdrivers as well as standard hexagonal bits. My problem was that I have some short hexagonal bits that I still wanted to use but…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases. I liked the one by Boogie a little longer than most, leaving space to…
Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Screws labels with pictures of DIN912 screws
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
For the organization of the small components that I have around, I designed this modular box. It is easy to print, does not require support or other components. The 1x1 box has an external dimension of 25x25mm, the wall is 1mm wide (it…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
Wydruk około 2,23 €–2,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
I printed it at 0.2mm layer height and a 0.6mm nozzle with pla
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
This is a 3D printable 1/4" to 3/8" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 3/8" to 1/4” adapter here. Important Update: I’ve created a…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D printable 3/8" to 1/4" screw adapter , ideal for adapting threads commonly found in photo and video equipment such as tripods, camera mounts, and more. Also check my 1/4” to 3/8" adapter here. Important Update: I’ve created a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Explore the realm of DIY and educational projects with this compact and versatile Auger Screw! Here's a detailed look: Dimensions (Imperial and Metric) : Overall Length : 4.5 inches (114.3 mm) Auger Length : 3 inches (76.2 mm) Shaft…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple plastic toy screwdriver for plastic screws with FreeCAD source file. With my print settings, the tip of the screwdriver is not very strong but as a toy for children it is quite OK and safer comparing to a metallic screwdriver.…
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Screw M3x25, thread pitch 0,5. Screw head - Allen. Printing without supports.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Storage ideal for pencils, small files or anything which is about 150 mm long. The tube itself is about 170mm tall and has a nice fit screw top. Print instructions G-code for mk3s and mini included. Happy printing
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…
Wydruk około 1,48 €–1,80 € nettoWstępna wycena jednego wariantu
Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made my own version of the M3 Screw sort tray. This includes a few extra sizes and an end catch tray to catch large sizes.
Wydruk około 2,68 €–3,27 € nettoWstępna wycena jednego wariantu
Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Tired of searching for screws and small items in various jars and containers? This 3D-printed organizer is the solution! Easy to Use: Simply pour the contents of the jar into the organizer for a neat and organized setup. Special Funnel:…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Hi all, this is a Mount for Amazon Alexa Echo Dot 5th Generation. You can slide the power plug into the mount and then plug it into the socket. No need for screws or glue. Supports are only needed for the cable holder. This is my first…
Wydruk około 4,00 €–4,88 € nettoWstępna wycena jednego wariantu
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Wydruk około 9,15 €–11,19 € nettoWstępna wycena jednego wariantu
Introducing the Wood Connector LTX, a heavy-duty solution designed to join rectangular wood pieces for creating robust and custom shelves. Engineered with precision, this connector features durable 3D-printed construction equipped with…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament guide, mounted to surface with screw Uses a 608 bearing Remixed from: https://www.thingiverse.com/thing:3148615
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Updated the model to allow for easier removal of the screwdrivers. Organize your screwdrivers using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports.
Wydruk około 2,47 €–3,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A compact and minimalist 10ml container designed primarily for creams, balms, and other cosmetic products. The screw lid ensures secure closing, while the knurled edge makes it easy to open even with slippery hands. Perfect for travel,…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Antrieb für 6-Kant Schraube oder Mutter um diese Werkzeuglos betätigen zu können. Hierzu einfach die Schraube bzw. die Mutter in den 6-Kant eindrücken und dann verwenden. Hier ist ein ganzer Satz verfügbar (M3, M4, M5, M6, M8, M10 und…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
M10 screw designed for (Un)original Prusa Drybox for F beam in standalone version. The screws were aligned with the holes in the F beam. They prevent air circulation when the standalone version is not used. Print settings: Recomended PETG…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable. Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Anchor #7 x ~30mm Screw The shaft of the anchor is designed for a ¼" drill bit.
Wydruk około 1,15 €–1,40 € nettoWstępna wycena jednego wariantu
Why couldn't a screw be also a plant pot? It for sure can! Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
Print with head on heatbed, 0.1 layer, more infill is better (I used 95%). If there is little infil, it snaps quite easily.
Wydruk około 0,27 €–0,34 € nettoWstępna wycena jednego wariantu
Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
Print with supports but only on the tip of the horn (if you don't block the supports around the hole for the screw, it won't be easy to remove) PLA is fine 15% infill 100% size 0.2mm use M3 screws (max 20mm long) with assorted bolts If…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Made this in light of the original reason this system was created. to get rid of the cheap crappy containers you get your screws in! Paired with the screw sorter from the link below, you're bound to enjoy using this system….. even if you…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Indicates intended direction for every screw. Holds screws firmly (use a flat screwdriver to pick them out). Can be tacked into the back of a standard compact disk (CD) case. Makes sure you have all your screws together. For the…
Wydruk około 6,23 €–7,62 € nettoWstępna wycena jednego wariantu
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a collection of knobs for M3 to M6 DIN 933 hex screws. In each dimension there are 2 different knurled designs to choose. The knob dimensions are described in the table on the picture 2. To calculate the visible thread, you must…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Star Wars : Skeleton Crew : SM-33 Thicker version. Removed some small insignificant things. Updated at 1:37PM CMT. I had loaded old files without offsets. All new files are thicker.
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :) https://www.printables.com/pl/social/236468-nieuniknione/collections/194978
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
Model uses layer specific setting of prusa slicer, prints sequential. Thanks to animatorgeek for his fine model.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…
Wydruk około 4,50 €–5,51 € nettoWstępna wycena jednego wariantu
Many times, you may need to securely affix a Raspberry Pi Pico within a project while ensuring easy removal when necessary. To address this need, this a straightforward screw mount solution that offers versatility, allowing you to either…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
10mm Screw and Nut with a tight Lead-Thru-Hole for 4mm PTFE-Tubes
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Arecibo - Magnetic bowl for screws and nuts. I designed this bowl to help my colleagues at work in organizing fasteners when repairing computers and small electronics. So that they don't roll around on the table and get lost. This bowl…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
I remixed the version to reduce the consumption of material. The slot was enough to align the screw and measure its length. The gcode is attached - it requires changing the material twice so that you can better see the scale and also the…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
A simple hanger on garbage bags.
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
I have finally developed a model for a very popular wall organizer. Now it can be used without drilling holes in the walls. There are two options available: for top\bottom mounting and for side mounting Plate size is about 58x58 mm for…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
This is a remix of johnzanussi's Williams Screwdriver Bit Holder. I liked the original bit holder a lot, but it didn't hold my bits tightly enough. So I made a couple improvements to hold the bits more securely. Compared to the original:…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This saves you a trip to a hardware store and few cents on the M3x25 screw ;) I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Remixed from Ricard2K's stand - the top part (screwdriverstand.stl) is unchanged, as it fits the screwdrivers perfectly. I have redesigned the base (Wera Stand 2.stl) as whilst the original is functional and clearly works, I kept having…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
module holder (SW3516 or SW3518) with screw clamp For a 27-30mm hole for mounting P.S.: if the module falls out of your model, use glue type B7000, B8000, T7000 or others Changes in the update: (v2 update 1-Feb-2025) The shape of the nut…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix of zoltanf's "Prusament spool to master spool adapter " For my spool holder i wanted the outside of the prusament spool to remain the same without anything sticking out so this remix has some blocks that hold screws…
Wydruk około 4,89 €–5,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi y'all this is my design for the showerhead holder. I looked everywhere but couldn't find anything suitable for me. The base has a single hole for m3 or m4 screws with a generous chamfer. Simply screw the base to a hole on your wall,…
Wydruk około 4,32 €–5,28 € nettoWstępna wycena jednego wariantu
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired by https://www.printables.com/model/394330-hex-bit-holder-removable
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Screwable caps for UHF type connectors according to 5/8 - 24 UNEF
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The model is fully functional, simple and, above all, solid Držák na přilbu Modely: Lehká nárazová přilba Dräger HPS 3500 SICOR EOM s brýlemi a se stejnou rukojetí
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable This 3D-printable shopping basket is designed for everyday use and easy assembly. The construction is solid and functional – ideal for home, workshop, or office. 🔩…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
uses 14 screws
Wydruk około 10,29 €–12,58 € nettoWstępna wycena jednego wariantu
![[Use M3 screws] Spool holder for Prusa MINI Flexible](https://media.printables.com/media/prints/62910/images/657225_6e3e876b-c636-4d75-9a4a-d73aa241cde4/ming-cheng-wei-she-ding-3.png)
