Wyniki wyszukiwania: crossbar

Sortowanie

80 modeli

P
Printablesc24w

Ender 5 Front Crossbar Relocator

Brackets to lower the front crossbar on the Ender 5 (or similar), to make it easier to see what's printing. Buy me a coffee No additional fixings are required - just use the 3 bolts which secure the original corner brackets and crossbar.…

Pobrania
1470
Polubienia
198
Ocena
4,96
P
PrintablesPaw85

Ender 5 Plus Crossbar Variable Relocator

This is a bracket to relocate the front crossbar of the Ender 5 Plus to get a better view of the build plate. You may locate the crossbar at any height you find suitable for your setup. Also consider printing the End Covers that protects…

Pobrania
1151
Polubienia
212
Ocena
5
P
PrintablesBTR3D
Pobrania
1113
Polubienia
107
Ocena
5
P
PrintablesPaw85

Ender 5 Plus End Cover for used with crossbar relocator

An end cover for the Ender 5 Plus to cover the sharp edges of the exposed beams when relocating the crossbar. You can find the crossbar relocator here: https://www.prusaprinters.org/prints/116582-ender-5-plus-crossbar-variable-relocator…

Pobrania
549
Polubienia
72
Ocena
5
P
PrintablesDork Design

Adélie Crossbar Locking Utility Knife with Pocket Hook! Fully Printable, No Screws, No Springs, No Glue

Introducing The Adélie Utility Knife This is a fully functional 3D printable utility knife that takes standard Stanley style blades. Too broke to afford a Benchmade? Too cheap to spring for a CQC? Just print one of these, which is totally…

Pobrania
444
Polubienia
95
Ocena
4,83
P
Printablesnerdknob

Rivian Crossbar Mounts

I created these wall mounts for when I'm not using my crossbars on my R1T. I used drywall screws to secure them to the wall. Drywall anchors are recommended if not screwing into a stud. PTEG seems to hold up fine but printing in ABS, ASA,…

Pobrania
377
Polubienia
45
Ocena
5
P
Printablescdh

Rivian Crossbar Wall Mount

These allow you to mount your crossbars on the wall however you'd like. I wanted separate brackets so I could have towel racks when the bars aren't installed on the truck.

Pobrania
275
Polubienia
29
Ocena
4
P
PrintablesChris Turnbull

2020 Crossbar Remix for Pastamatic Filament Spool Winder

Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…

Pobrania
263
Polubienia
27
Ocena
3
P
PrintablesTodd Stansell

Rivian Crossbars - No Whistle

NOTE: If these have helped your crossbar whistles, please leave a make or a comment 💭 and let me know! 🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian .…

Pobrania
237
Polubienia
40
Ocena
5
P
PrintablesBernt

3030 Crossbar Remix for Pastamatic Filament Spool Winder

Stl:s now with mounts for 3030 rails…

Pobrania
197
Polubienia
24
Ocena
5
P
Printablescdh

Enhanced Crossbar Bed Mounts for Rivian

This was tested with Crossbars purchased in 2023 using ABS filament. I do not recommend using PLA as temperatures inside the bed can get high enough to melt and deform PLA. BOM: 2 x 30mm M6 Bolts 2 x M6 Washers Mounting Instructions:…

Pobrania
190
Polubienia
32
Ocena
4,8
P
PrintablesStejarn2

FlashForge AD5X Enclosure front crossbar modifications

Disappointed with the clunkiness of the printed parts to the enclosure for the FlashForge AD5X I tweaked the files provided on FlashForges website to something closer to my tastes. Initially this was to remove the recessed printer name…

Pobrania
184
Polubienia
28
Ocena
4
P
PrintablesFadedHero636

Ender 5 X-Axis Crossbar Relocator

Relocates the x-axis crossbar and covers the nuts for the belt tensioner

Pobrania
158
Polubienia
24
Ocena
5
P
PrintablesRikkn Spielt

Crossbar Relocation mit Tensioner für Zero G mercury one

Download: https://makerworld.com/de/models/2738012-crossbar-relocation-tensioner-zero-g-mercury-one#profileId-3035756 Crossbar Relocation mit Tensioner für Zero G mercury one es wird ein 370mm Alu 2020 vslot profil benötigt.

Pobrania
153
Polubienia
36
Ocena
5
P
PrintablesJeff T

Crossbar Christmas Light T-Slot Clip for Rivian

*** EDIT I added a revised version that's a bit sturdier. I recommend you print that one.*** I wanted to add Christmas lights to my crossbars but didn't want to wrap them or zip tie every light. I also like when lights are all in the same…

Pobrania
142
Polubienia
26
Ocena
0
P
PrintablesIan Qiu

Pastamatic - Cradle Crossbar Fixer

The Crossbar used to fix each end is too loose for my liking. Use M3 bolts and nuts to secure the crossbar to each cradle. Orientation Print as it is, no support is needed. BOM 4 x M3x12 4 x M3 Nuts (6 for each if intend to fix the wiper)

Pobrania
142
Polubienia
20
Ocena
0
P
Printablesvidision

End Cap for Thule Roof Rack Crossbars

I printed as positioned, with the diagonal end on the print plate. This gave a nice combination of strength at quality at 0.24mm layer height.

Pobrania
134
Polubienia
15
Ocena
5
P
PrintablesMikey

Pastamatic crossbars with threaded inserts

Holes added on the bottom for M4x8 threaded inserts

Pobrania
130
Polubienia
16
Ocena
5
P
PrintablesRyan

Bed Crossbar Mount for Rivian

I have two pairs of crossbars (reasons), and don't like to leave the roof ones on, due to wind noise and efficiency. They are a bit cumbersome and take a decent amount of space in the frunk or gear tunnel, so I decided to create a mount…

Pobrania
123
Polubienia
20
Ocena
0
P
Printablesfactory13

Rivian Crossbar Inserts, Set of 180mm, 270mm, & 540mm length

Update 9.18.24: I re-uploaded 270mm and 540mm files because there was a dimensional error. Also tested on Bambu P1S in PETG, but I still recommend ASA for UV resistance. Printed on QIDI X-Smart3 with QIDI branded ASA filament on default…

Pobrania
121
Polubienia
19
Ocena
5
P
PrintablesOhneName

Ender 5 Crossbar

Ender 5 Crossbar Leider noch nicht getestet Unfortunately not yet tested Print Settings Supports: Yes Resolution: 0.2 Infill: 15% Filament: - PLA Notes: I used red fillament because I don`t have black filament at this moment. Will paint…

Pobrania
99
Polubienia
26
Ocena
0
P
PrintablesExtra_bitz

ZeroG Crossbar support

Zero G Crossbar AluRemix from i don't remember from where.

Pobrania
98
Polubienia
21
Ocena
0
P
PrintablesBogy
Pobrania
79
Polubienia
7
Ocena
0
P
PrintablesSubieRuby

Rivian Crossbar Mount (With Extra Support)

Rivian crossbar wall mounts with added extra support around the mounting points to prevent breaking under weight.

Pobrania
72
Polubienia
2
Ocena
0
P
PrintablesNémet István

Crossbar for bike accessories

3D printed crossbar for bike accessories. This design contains two adapters one set for 24mm handlebar and one for 28mm handlebars. Perfect fit on straight handlebars, but can be fitted on custom shaped and angled handlebars as it is on…

Pobrania
70
Polubienia
26
Ocena
5
P
PrintablesSpekkie

Pastamatic crossbar glue clip

I really liked the idea of this crossbar remix, but I already printed the original pastamatic crossbars and didn't want to waste filament in printing entire new ones (yes I'm cheap :P ). So I modeled some clips to glue in place manually.

Pobrania
68
Polubienia
3
Ocena
5
P
PrintablesNate Marrufo

Skinny Starlink Mini Crossbar mount

Sadteeto made an excellent Starlink Mini mount for most standard roof bar sizes. I have a solar array on my roof bars which gives me little to no space for the mount so I had to make it skinnier. It now fits between my panels and still…

Pobrania
66
Polubienia
11
Ocena
0
P
PrintablesYell

Trident Toolchanger Docks for Anthead on Crossbar.

Anthead Crossbar Docks for Madmax Toolchanger These toolhead docks are designed for the Madmax Toolchanger system and are compatible with Voron Trident and similar static gantry printers. The docks mount to a 2020 extrusion oriented in…

Pobrania
64
Polubienia
32
Ocena
0
P
Printablesalexcocan

Dacia Duster roof rack crossbar endcap

Encap for Dacia duster factory roof rack crossbar

Pobrania
61
Polubienia
10
Ocena
0
P
PrintablesVlad

Crossbar for fixing on a board

Crossbar for fixing on a board

Pobrania
57
Polubienia
3
Ocena
0
P
PrintablesGreg

Phone mount for Trek Bicycle crossbar

This mounts your iPhone or smartphone to the crossbar of a newer Trek bike with a modern flattened crossbar. This fits a Dual Sport 3, but likely fits most modern Trek models. iPhone holder can be tilted to optimize angle of view. Also…

Pobrania
56
Polubienia
13
Ocena
0
P
PrintablesLuckyn

Crossbars / Shelf above the Core One L printer

If you want to place something above the printer but don’t want to put stress on the top plexiglass—perhaps to avoid bending or causing issues with the print head when opening the ventilation Material: Prusament PETG, 20% infill, 0.4…

Pobrania
55
Polubienia
19
Ocena
5
P
Printablesamp7506

Crossbar relocator (2"

I needed the crossbar a little lower for the front purge bucket that I had. I also had to cut the front part of it off because of the bucket but not necessary if you don't have one.

Pobrania
49
Polubienia
3
Ocena
0
P
Printablesgexgecko

Ski Roof Rack for 'CargoLoc' brand crossbars

This is a re-design of JohnA's ski roof rack made to fit my roof rack crossbars of this brand: https://www.amazon.ca/gp/product/B00GA2HKAU, and sized for xcountry skis instead of downhill (you can just use 2 for downhill if you like, it…

Pobrania
43
Polubienia
3
Ocena
0
P
PrintablesJordan Powers

Uplift desk crossbar cable clips

I needed to manage the wires on the underside of my Uplift standing desk, and I didn't want to use the included adhesive cable tie mounts. So I printed these wire management clips. There are two sizes of clips: Smaller size that snaps…

Pobrania
38
Polubienia
4
Ocena
5
P
PrintablesHilbe

Rivian Cargo Crossbar Mount for Rubbermaid Fasttrack

This allows you to hang your Rivian Cargo Crossbars on a Rubbermaid Fasttrack. Prints on its side with minimal supports. I used tree supports and higher infill for strength.

Pobrania
38
Polubienia
9
Ocena
0
P
PrintablesWhatder

Ender 5 Front Crossbar Relocator with Tensioner Remix

Print using c24w's original instructions. I have printed in PETG with 30% gyroid infill but that may be overkill!

Pobrania
37
Polubienia
6
Ocena
0
P
Printablesphiba

Airfoils for 8020 40-4040 roof rack crossbars

Note: Please be sure to use the R1 STL models. They have better clearance hole sizes. I have a roof rack on my camper van that is 69 inches wide. It has two 8020 40-4040 crossbars across the top. These 3D-printed shapes are intended to…

Pobrania
35
Polubienia
8
Ocena
0
P
Printablesnickcmt

Rivian Cargo Crossbar Mount – MOLLE Panel

Rivian Cargo Crossbar mount to attach to a bed wall MOLLE panel or wall. I have the Builtright one, but there is no reason it wouldn't work on the s00nish variant. Uses ¼-20 stainless countersunk hardware (at least 1 - 1 ½" long) and a…

Pobrania
34
Polubienia
7
Ocena
0
P
Printablesptitluc

Ikea Ivar cracked crossbar repair - no tools

printing I did print this in PLA with a 0.4 nozzle and 0.3 mm layers. U shape is 100 % infill, plug are 30 % infill rectilinear but I am not sure it matters a lot :) . usage Plugs are tight, you may have to use some force to make them fit…

Pobrania
34
Polubienia
9
Ocena
0
P
Printablescdh

Improved Holiday Light Clips for Rivian Crossbars

If you want super consistent spacing and mounting of hoiday lights on your crossbars, this will do it for you. There are 3 main components: 4-piece Rail Insert: Each channel in each side of each crossbar gets 2 of these. They hold 4…

Pobrania
30
Polubienia
9
Ocena
5

Aoocci C3 mount for Suzuki V Strom 1050 (for 25mm crossbar)

This mount holds the Aoci as close as possible to the crossbar so it doesn't stick out. It's designed for a 25mm crossbar, which is what the V Strom 1050 has (25.5mm to be precise).

Pobrania
28
Polubienia
5
Ocena
5
P
Printablesbabock

Rivian Crossbar Spacers for Yakima FatCat Ski Racks

Create spacers to allow the Yakima FatCat ski racks to be mounted to a Rivian crossbar with stainless T-Nuts. Used the following T-Nuts from Amazon. 6mm x35mm https://www.amazon.com/dp/B09TYS712R?ref=fed_asin_title&th=1&psc=1 The notched…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesTodd Stansell

Rivian Crossbar No-Latch Tool

🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . Crossbar No-Latch Tool This simple tool is designed to slide in from the underside of your crossbar…

Pobrania
24
Polubienia
4
Ocena
5
P
PrintablesJaina

Adjustable Laptop Stand Crossbar - Short Version

This is simply a cut down version of the connector found on Thingiverse sized to 225mm length for use with smaller print beds. To be used with Adjustable Laptop Stand

Pobrania
24
Polubienia
4
Ocena
0
P
Printablesscross01

Suspended Ceiling Crossbar Rail

Starting point for creating a custom Rail for the main crossbar of an Embassy suspended ceiling panel kit from Costco I'm creating some custom rail pieces for an area where the standard rail attachments can't be used due to restricted…

Pobrania
23
Polubienia
6
Ocena
0
P
Printablespiotrb

Crossbar Mount

This is meant to work in conjunction with my tophat mod , it can each over it and provide a stable platform to mount things above the top of the printer such as an ERCF. Print 4 of these This is meant to attach to a M5 Threaded 2020…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesKEKO

Stealtchanger Angle Crossbar

I didnt want do switch the front extrusion to 2040, so i instead did some simple modifications to an piece of aluminium angle. I used a pice of scrap that now is 20X23mm and 3mm thick. If you order a piece i redommend 25x25x3mm. For my…

Pobrania
22
Polubienia
5
Ocena
0
P
Printablesdlewis39

Yakima Ski Rack Mount for Rivian Crossbars

I modified this Yakima adaptor to work with the bulky Rivian OEM cross bars by assembling it with the mount created by Tinker86 on Thinkgiverse (https://www.thingiverse.com/thing:6533914). It is designed to be used with standard insects T…

Pobrania
20
Polubienia
4
Ocena
5
P
PrintablesSANAIR

BTT Smart Filament Sensor mounting Ender3 Topcrossbar 2020

I have the filament spoolfeeder on the right side of the printer attached to the wall. so I felt that the BTT filament sensor is better positioned on the top crossbar (a 2020 profile) and fed through 2 pulleys with bearings (other…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesLautzy

Uplift Desk Commercial Crossbar Power Strip Mount

I created this bracket to solve the problem of my power strip hanging about an inch off the ground when standing at my Uplift desk. Printing two of these brackets allows the power strip to be mounted onto the crossbar and off the floor.

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesZdeněk

Replacement Rubber Jaw Pad for Renault Roof-Rail Crossbar Clamp (SKU 82016221120)

Description This 3D-printable rubber replacement pad fits over the movable jaw of the clamp used on a roof-rail-mounted crossbar system (similar to those used on Renault Grand Scenic 2016–2022 OEM roof bars with manual screw clamps). The…

Pobrania
16
Polubienia
1
Ocena
5
P
Printablesvidision

End Cap for Thule Roof Rack Crossbars with Hook Holes

I added holes at the end for hooks to add options for securing cargo.

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesMartunex

Raised Crossbar for Stand Legs

The model is only one leg, you need to duplicate and mirror in the slicer to get both as they're symetrical. The length stays the same so the angle range doesnt change from the original. IMPORTANT : the order of instalation matters. First…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesTipic_ faker

Ender 5 Plus Crossbar Variable Relocator (Stiffer!)

Inspired by: This model uses M5x(8 or 10) screws and T-nuts instead of the original screws to secure the crossbar. It is more secure for applications such as installing a nozzle-wiper/purge bin. BOM Name Amount M5x8 Screws 6 M5 T-Nuts 6

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesErnestasVai

Compact mobile phone handlebars crossbar mount

Many stock mobile phone handlebar mounts i tried are quite high and thus less stable during the ride. I wanted something as close to the mounting bar as possible, also i wanted it mounted on crossbar, which is much thinner than…

Pobrania
14
Polubienia
4
Ocena
0
P
Printablesjuricabi

Crossbar Pulley Cover for Ravaglioli lift

Made replacement for broken one. Print with supports.

Pobrania
14
Polubienia
1
Ocena
0

SCHLEPP ONE Crossbars

Printable Crossbars and Crossbar Mounts for SCHLEPP ONE Camera Cart. Required for mounting the SCHLEPP ONE Middle Shelf: 1x Crossbar Long 1x Crossbar Medium 4x Crossbar Mount Set of Screws required (included with Middle Shelf purchases):…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesAaron Prosser

Tiller extension holder for crossbar (parallel saddle)

This is designed to provide tiller extension storage for hobie beachcat sailboat. Specifically designed for the Hobie 17 18 20 or 21. This provides a place to store the tiller extension stacked on the crossbar. Feel free to take the idea…

Pobrania
12
Polubienia
3
Ocena
0

Replacement Crossbar Mount for SCHLEPP ONE / SCHLEPP ONE-S Crossbars

Mount should be printed with ABS, PA 6 or PA12 for best performance. We do not assume any liability for the use of self-printed accessory parts. Before use, we recommend conducting your own load tests. For prototypes, we have consistently…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesAinon3Dtisk

Crossbar cover for FORD focus

Hello, Today I have for you a Crossbar Cover for a FORD Focus car. They are suitable if you lose the original. They fit practically every crossbar model. I used ASA/PETG as the material. You need to use supports If you are interested in…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesPJ

Příčníky Compass - Compass crossbars

Náhradní krytka na příčník compass. Šedý kus na fotkách je testovací, černý matný originální. Foto na autě je vytištěný kus, Prusa galaxy black 0,4n. Zamykací kolík je v různých délkách po 1mm. Vyzkoušejte, který Vám sedne nejlépe……

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesPixel2Reality

Bowden tube holder crossbar Creality Ender 3 V2 neo

I wanted to print directly out of my filament dryer when using my Creality Ender 3V2 neo so I made this simple clip on holder to stick in the bowden tube. In this way the filament will be feeded directly into the direct extruder I mounted…

Pobrania
7
Polubienia
2
Ocena
0
P
PrintablesJaredIsCoding

Zelevons: XR Style Footpad Plates, Crossbars & Bolt Tracks

These open-source Zelevons provide sturdy mounting interfaces for XR-style footpads, with excellent contact across rails and bumpers and compatibility with any 3D printed footpad (default fit Mathpads 5+0). Would also work with other…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesTommy

Věšák na střešní příčníky Neumann, crossbars holder

Závěs na příčníky od firmy Neumann Holder for Neumann corssbars Upevnění vrutem 6,0 x 30

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesRobulus

Easy-up (Crossbar lifter)

I designed this to fit over the end of a piece of crossbar to assist with lifting the crossbar to heights beyond one's reach. (similar to "crossbar lifter" and "E-Z Up")

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesMarkandey Singh

Cybertruck Level Bar Angle Adjustment Wedge (for Tesla Factory Crossbars)

Cybertruck Level Bar Angle Adjustment Wedge (for Tesla Factory Crossbars) This wedge is designed to correct the angle of a level bar when mounting it to the Tesla factory crossbars on the Cybertruck . Because the geometry of the…

Pobrania
6
Polubienia
2
Ocena
0
P
Printableskara

Crossbar holder for hurdles

Crossbar holder that is put on a 2cm diameter wooden pole (height can be adjusted by sliding) and holds a crossbar for jumping over it. Goes together with the hurdle stand: You would need to print both the stand and the crossbar holder…

Pobrania
6
Polubienia
0
Ocena
0
P
Printablescmalrose

Filament spool (interlocking) crossbar - Husky shelf

Filament spool (interlocking) crossbar - Husky shelf [Cross bar - black] Dimensions 18.1 x 18.09 x 226 [Tube (Interlocking) - grey] - mesh boolean Dimensions: 22.8 x 22.75 x 181 If you want to have a filament spool holder but don't want…

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesjprince

Grow Tent 16mm to 1/2" EMT Crossbar & Support Adapter

Add custom horizontal or vertical supports to a 16 mm grow tent frame using standard 1/2" EMT conduit . These adapters allow you to cut inexpensive, readily available 1/2" EMT to the length you need and snap the completed support directly…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesElGuano

Rivian Cargo Crossbar Mount for NMO cables

I created this mount in Tinkercad to allow me to add a very strong, low-profile, aerodynamic radio antenna to a Rivian R1 vehicle. You need something like the Megawatt cargo crossbar adapter, or something else that mounts to the crossbar…

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesscul

Voron v2.4 Z-Chain Crossbar Mount

Mount for the rear crossbar to move the z-chain out of the way below the crossbar.

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesMrHegger

Clip On Cable Organizer for Humanscale Monitor Arm Crossbar

I printed mine from ABS but every material should work. Pick your favorite settings.

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesMV

Faceplate for Crossbar relocation - Zero G Mercury One

Just a simple faceplate for use with the Mercury One Crossbar Relocation mod. Uses M5x10 BHCS with M5 T-nuts (Roll in nuts won't work)

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesFixDimensi3D

mounted crossbar lock/holder 20x42mm

I have not included the pole itself, so that anyone who wants one can create and install a pole according to their own preferences. I have provided a base for the pole that features a sturdy, solid locking mechanism—no nuts, bolts, or…

Pobrania
0
Polubienia
1
Ocena
0
P
Printablescorexy_lab

10-Spool Top Hat for Voron 2.4 - 2020 Crossbar Remix (no metal rods)

Remix of the 10-Spool Top Hat for Voron 2.4 by Tyler Krick, for builds without 8 mm metal rods. Photos of the printed build will be added later. The current images are renders of the model. What you need 4x 2020 extrusion, 470 mm (same as…

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Filament spool (interlocking) crossbar - Husky shelf

Filament spool (interlocking) crossbar - Husky shelf [Cross bar - black] Dimensions 18.1 x 18.09 x 226 [Tube (Interlocking) - grey] - mesh boolean Dimensions: 22.8 x 22.75 x 181 If you want to have a filament spool holder but don't want…

P
Printables

Crossbar Relocation mit Tensioner für Zero G mercury one

Download: https://makerworld.com/de/models/2738012-crossbar-relocation-tensioner-zero-g-mercury-one#profileId-3035756 Crossbar Relocation mit Tensioner für Zero G mercury one es wird ein 370mm Alu 2020 vslot profil benötigt.

P
Printables

Pastamatic crossbars with threaded inserts

Holes added on the bottom for M4x8 threaded inserts

P
Printables

Adélie Crossbar Locking Utility Knife with Pocket Hook! Fully Printable, No Screws, No Springs, No Glue

Introducing The Adélie Utility Knife This is a fully functional 3D printable utility knife that takes standard Stanley style blades. Too broke to afford a Benchmade? Too cheap to spring for a CQC? Just print one of these, which is totally…