162 modeli
Keeps container lids in place. Slide in lower part first, push upper part in second. It locks to the lower part. Disassemble by using it nail or a wood screw. The “single-lock” version is more easy to handle, the “double-lock” version…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This buckle is for elastics. It is used to tigthen a cpap hose to a elastic For universial use I included severel versions. The example is the 12mm version. The naming is according to the width of the used strap. The printing settings are…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cure and dry your 3D resin prints in mere minutes. I used to have a setup with a UV led strip, but that turned out to take hours. This is a completely redesigned version of the UV resin curing that I currently use. The main idea was to…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu
Hello! Tired of the soft measuring tape slipping out of your spool ? This clip will help secure it in place. Recommend printing w/ a brim and support on build plate. May need some patience and effort in loosening the support due to it's…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
We like to keep a box of tissues on the floor of the back seat of our car (VW ID.4). The floor is flat and the material is like a skating rink with the tissue box rocketing from side to side as we take turns. I wanted something to keep…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Once in a while, I either have very large items, or more likely, my large rectangular IPA containers to cure. On my Phrozen Luna curing station, I needed something to allow for this, since the rotating table can only hold so big items…
Wydruk około 8,79 €–10,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
28.02 ID press fit cap with stand to make curing times easier. Stand allows turning flashlight on and off with more stable stance I cut various size pieces of the fiber optic to get higher up in the models Modeled for this UV Flashlight:…
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
Clip for Securing Bestway Pool Cover — Fits 46x31 mm Frame Tubes A mounting clip designed to secure the cover of your Bestway pool. ✅ Dimensions: Available in two heights — 10 mm and 20 mm , fits frame tubes sized 46x31 mm. ✅ Material:…
Wedge to secure the stock battery on a Talaria Sting E-Bike. Print on it's side with 6 walls and high infill.
About this project I modeled this clip to hold our fabric pool cover in place by securing it to the pipe frame. Maybe it will also be handy for you!? Our pool's frame pipes have an outer diameter of 40mm. The clips have an inner diameter…
I absolutely love the auto-rewinding spool holders, but the only place I have to put them is on top of my Ikea Lack enclosure, which works great, until you want to open the lid. I designed these brackets to secure the spool holders to the…
--edited-- My 3rd iteration of the curing riser is for the Elegoo "Mercury Plus 3" wash and cure station. However, you should be able to scale it a bit to make it work on any curing station with a round turntable. The files are for a…
This is partly a remix of the original Prusa parts, and a new part. Since I occasionally had warping with large area prints, I optimized the printer so that the air did not blow onto the print bed through the hotend. Since I am operating…
This end-cap replaces the stock buffertube end-cap when medium sized batteries are used with the ARP. The stock end-cap doesn't allow medium sized batteries to fit entirely inside the buffertube without wires sticking out and this one…
This simple print blocks the photoelectric sensor so that you can turn on the curing station without aligning the UV cover with the correct corner. I designed it because for some reason the sticker that is meant to block the sensor did…
3D-Printable Resin Model Support for UV Curing Description: Introducing our specially designed 3D-printable support for resin model curing! If you've ever faced the challenge of keeping your delicate resin prints upright during the UV…
This is a remix of hag's J1772 Dummy Socket model, for which I have enlarged the opening holding the J1772 handle's pin that keeps it in place in the receptacle. The receptacle itself is angled, and has two holes for screws*. Good for…
Modeling a support to fix the cable chain and to connect the motor.
Model remixed from : https://www.thingiverse.com/thing:4735175 Gear Pully: no supports PLA (I imagine PETG will work fine as well) 100% infill (Less infill will not reduce print time that much) You will need to work the gears free (they…
So I needed a way to secure my rink tarp down without poking holes in it. Securing through the grommets seems like a good idea but the screw heads are too small. So I designed these stepped washers to go through and secure the grommets.…
UPDATE: USE REV B Thanks to input from @Verender, added more tolerance between piston and body, should be smooth now. Aditionally cleanded up the model and added some chamfers for comfort Theyre quite a good deal if you can get your hands…
I needed a holder for my UV curing light I bought on Amazon . I diy'd a curing box (Hence the TOP NOTCH printing on my painters tape..ha) and needed a way for my light to not; a) fall through, crashing on whatever item was being cured and…
Simple UV curing station for SLA printed things for less than $25. Can fit objects up to 6 inches in height and 6 inches diameter. Items needed UV LED strip — https://amzn.to/2Q0tg9M Turntable — https://amzn.to/2Z2P34P (no batteries…
These are the files for a 3D printed Resin UV Curing Chamber. If you like this model consider becoming a Patreon: https://www.patreon.com/WF3Dprinting The model is split in two pieces to fit on to a printer with a build volume of 25 x 21…
As always I will promote and REWARD the first people to post quality makes (must enable tips on your profile for reward). A quality make is a successful, complete, hopefully decent looking print at 100% scale. Preferably completely…
I created a lid for my 1 gal. Metal Paint Bucket so I could use it as a curing station for my Elegoo Mars prints. Materials Needed: 1 x 1 gal. Metal Paint Bucket and Lid - https://is.gd/BV8lXY 1 x Mirror Sheets Flexible Non-Glass Mirror -…
I don't like using glue when attaching parts that I could foreseeably need to take apart or modify in the future, so I added screw holes for mounting the light bar supports. The Z-Axis tops have a hole in the center of the hex depression…
fix it with 4 to 4,5mm countersunk screw
to be screwed with the case screw under the power connector
Ich habe einen Ring entworfen um ein Hygrometer in einem Ikea Korken Glas Unter zu bringen. Der Ring sollte mit den Gläsern der Größe 0,5L - 2L Kompatibel sein. Ein Boveda mit 30g lässt sich ebenfalls im Deckel unterbringen. Gedruckt in…
I designed this for my Govee LED Light Strips, so I can easily cast the light upwards towards the wall at an angle for some accent lighting. There are holes equally spaced apart for securing to a surface via screws or nails. The strips…
Description I created this bolt “guide” for filament and Bowden tube. Use case is when you want to use coupler to secure Bowden tube bud you have thick wall on your enclosure or dry box. So I created these in the bolt you just simply…
Materiál PETG. Spodní část není nutné připevňovat k CB
Filament spool V2.0 for 3D printingmaterials. Ideal for dehumidifying through large side openings. Specially shaped holes that prevent filament from unwinding on its own. Special openings for filament are made in such a way that the…
This box is (re)designed to take a 50 watt UV led COB that is powered directly on 220 or 110 volt. Print instructions This box is (re)designed to take a 50 watt UV led COB that is powered directly on 220 or 110 volt. I bolted this onto a…
After the original nut broke, I designed this hex nut as a replacement part.
a stand that fits on the turntables for resin curing stations to avoid any uncured resing suspending in washing chemicals from sticking to the pring and curing in a large flat puddle and deforming the print while defacing the turntable…
This thing Allows you to cure your hollowed out models through your drain holes. you can attached 2mm or 3mm fiber optic cable to the end of a UV flashlight and use this flexible wand to cure the inside of your model. Curing the inside of…
Flush Mount D-ring Load Securing Mount Step file included
Turntable platform for an Elegoo Mercury curing machine.
This is a box I designed in Fusion 360 to cure uv resin prints. I used the following uv led spotlight and solar turntable: https://www.aliexpress.com/item/4000484334154.html?spm=a2g0s.9042311.0.0.27424c4dwnoZU6 The spotlight is fixed to…
Curing box made cheap and simple :) I designed a cheap and nice looking curing box :) What you need: 3D Printed Parts 4 Pieces of hardboard wood 155x258x2,5mm UV Light:…
Buy one of those lights & turntables from amazon and install into this. I bought https://www.amazon.com/dp/B083ZFH24H/ Glue/Weld the two chamber pieces together. Use 1.75 filament for hinge. I'm still in the process of printing/building…
This stand enables you to more easily and evenly cure elongated objects without supports. It attaches to the Anycubic Wash & Cure 2.0 curing platform and provides a post for your print to lean against. This came to be as I like to print…
This is a spool for optical fibers or thinner cables/wires. It also comes with a cover preventing un-spooling. The spool can be mounted using a M6 screw or by glueing in magnets in the 3 provided spots. Cover files are in the remixed model.
I built my own UV curing station from a dollar store cake carrier and UV LED strip. I needed a small rack to elevate the part while it was curing. I printed mine from clear PLA. Scaled for a Longer Orange 10 bed size, but it should be…
I built myself a cheap UV curing station for resin prints out of a beer box, aluminum foil, and a UV light off Ebay. Bolts to a cardboard box using 12mm long M3 bolts. The UV lamp has 4 bolts already installed holding a piece of edging in…
Replacement CORE Body Temperature Securing Clip
This is a simple platform for the Elegoo wash and cure station. It maximizes the space for rotation. simply cover the top surface of the print in aluminum tape for reflectivity. This adds quite a bit of space from the platform that came…
This is a securing pin for your hinged windows by VELUX. Mine was broken and a new component was way too expensive to spend the money on.
I have specially designed this part for my DIY UV curing chamber and I printed it with my FDM and also with my Resin printer. FDM is more flexible but I decided to use the Resin version because of the higher details. For the wiring I…
We bought a used swing for our baby but one of those tightening nuts was missing. I designed a new one and it fits just perfectly! If you´re unsure if it fits your swing, these are the thread dimensions: Thread lead: 7 mm, Inner Diameter…
LaserPecker LX1 Upright Stand and Arm Support Helps to reduce the foot print of your LaserPecker LX1 as well as secure the arm in place and help prevent accidental pushing down of the arm. Youtube video:
I use UV-Resin additionally to protect fishing floats or use it for coating. For this purpose I made a stand which fit into my curing station Elegoo XS. There are two rods for different heights. You need the piece (Rad=weel) twice.…
This peg/pin will help you secure something, such as a gridfinity base with screw holes, to a plywood sheet, like those often found in desk drawers. Where a screw isn't suitable because the plywood is thin, this peg might work. Beware,…
I created the model after arriving home one day and finding that the deadbolt had been partially/unsuccessfully picked, needless to say something had to be done. this device prevents the deadbolt from being unlocked while in use by…
Two pieces. Can be glued together or kept apart. Works with this UV lamp - https://amzn.to/3AI1wlo (If you use my Amazon link, I will make a small commission.) https://youtube.com/shorts/6kG2OvhELgY Print Settings Printer: Creality CR-6…
I installed the Filler filament spool holder 2 meters above my V0 and had problems with the spools sometimes slipping when the extruder jerked heavy. This bolt is easy and fast to print and has held up for over a year now without any…
Simple rim for the turntable of Creality wash and cure UW-01
This is a tab for Ikea Trofast, and for securing it to the wall without having to put a screw through the furniture piece. This also will work for other furniture that is an inch or less thick.
Sovol curing UV light stand The optional door component is attached to the mount and can be opened to access the contents The stand is friction fit Note: PLA handles UV-light poorly, it's recommended to use other plastics to print this…
I bought a Quans 20w UV Light (Note: affiliate link) after I had purchased a resin printer to cure the prints once they had completed. I wanted to have a box that was opaque to be able to cure them most effectively, so I designed this and…
A guest broke the securing pin, a new part is crazy expensive, so I designed my own. (ignore the poor print quality - it's been printed on an old Ender 3 V2 with a dirty hotend.
This self-securing hook consists of 3 parts: Base (120x50mm): Just mount it anywhere you like it has 5 mounting holes to meet almost every requirement. You can also put a strong magnet into the case to use this hoof WITHOUT any screws on…
I designed this chamber to be able to hold more/larger resin prints for curing. The lid is designed to hold a 20W LED UV light I purchased off Amazon, with the light's rough dimensions being 3.5" x 4.5". It is meant to be lined with a…
There was several times that the thumbscrews securing the print bed would become locked up after printing…even after cycling the bed temperature through various temperature ranges. I modified the screw cover to provide a little more…
I wasn't happy with any of the options that were readily available to purchase or download and print, so I made my own. It is big enough to accommodate the print volume of a small resin printer, ie. phrozen sonic mini. Print instructions…
It can be a bit tedious tightening the M3nN nuts with the supplied universal wrench due to the switching back and forth from side to side. I made/printed a simple wrench that allows you to capture both nuts at the same time (avoiding the…
Coat hook for bott load-securing rail. Can be slotted into the rails.
I wanted a larger surface to cure Resin prints on inside my curing station. Printed in PETG, but material doesn't matter. Print face down with no supports, looks great with the textured steel sheet! Motor still runs smoothly with the…
A curing box that can fit the entire print volume of my Epax X1 (or similar photon/mars). The door is magnetic, embedded are 16x2.5MM neodymium magnets I actually got at Daiso Japan, but 16x2mm magnets should work if you can't find those.…
I designed this to work with a nail curing lamp i found on amazon. i didnt know any one else had made one like this. mine has a working hinged door and a lock its dimensions are 217x240x100mm so it might fit other lamps? here is the link…
3D printed curing station Parts neeeded Turntable :…
This a resin curing chamber I designed to use with my Anycubic Photon. The chamber is large enough for a full build volume print that is rotated on the turn table in the base. Works like a dream! Enjoy! Print Settings: No Supports .2mm…
jimustanguitar made an awesome curing station but it is designed to be cut on a CNC. Since I don't have one, I'll make it 3D printable. Checkout my video of it: https://youtu.be/hDJaLXGa8ZI You need a printer with a 300x300 build plate at…
The marker tends to fall off while taking your tablet out of bag? Fear no more as your pen will be securely held in place by miniature magnetic belt! Magnets used are 3mm diameter 2mm height:…
This project helps you build an afforable UV curing cabin (under $15) using a 28L insulated bag and a UV LED strip kit. It’s ideal for use as a resin curing station or for charging phosphorescent 3D-printed models . An optional electric…
I modeled this after the plate that was brittled by age and broke when pulling the string blinds shut.
Working on a enclosure and needing a way to secure a panel to allow for more support.
A UV curing box for your resin 3D prints. You need a lasercutter and a 3d printer to make this. See link for tutrial for how to make it: https://www.instructables.com/id/UV-Curing-Station I'm also participate in Make a tool contest on…
A tool for helping carry sheet goods (plywood, sheet steel) by hand and securing them in the back of a vehicle with a ratchet strap. The square outline on the side is to place a 2x4 between 2 hooks to keep them separated. I printed it in…
Securing Muff, when transporting your MK3s with a spool of Filament on the holder. A reusable zip tie with 1.25x7.5x150mm is needed to use it. The green one (PLA) is the beta version, the transparent one (PETG) is also that one with the…
print with TPU for softer press
Print unsupported, they are tilted towards your face for a better viewing angle. Clip stops the remote constantly falling off, it even survives blowing over on windy days. No stealing and selling! Category: Sport & Outdoors
The Geeetech GCW02 Washing and Curing Machine does not come with antislip feet although the housing has places for them in the housing. I have printed two of each model in TPU98. They can be easly press-fitted into the recesses.
Screw-on corner securing system for Markbass cabs. I use it on wheeled tray t to move my equipment during set changes on stage, and for transporting equipment. Printing tips : Layer height: 0.2mm Wall loops : 3 Bottom shell layers: 4 Top…
Spare part for BIG Linde Forklift for Kids (Kinderstapler im Linde-Look) http://www.big.de/de/produkte/fahrzeuge/traktoren/linde-forklift-800056580/ Made this for a collegues son. Be careful when testing, it fits tight and is not easy to…
The bracket for securing the strap of swimming goggles is a small but essential component designed to hold the strap in place, ensuring a snug and adjustable fit. It helps maintain a secure seal between the goggles and the swimmer’s face,…
Our Maxi Cosi Lila XP plus stroller has a lower basket that often comes loose when loading the stroller into the car or just walking. This is really annoying, so I created this model. It prevents the basket from coming loose. I only had…
Sometimes I want to cover a larger area with the UV lamp, but the small feet on the lamp don’t allow for that. With this tripod mount, I can adjust the height and orient it however I like. While I designed this for my generic UV lamp…
by CriptasticHacker https://cripsrise.neocities.org/ https://hackaday.io/CriptasticHacker https://www.youtube.com/@CriptasticHacker A securing crown gear for a baby fence (Regalo 92-inch) which is no longer in production. I guess they…
This modular curing rack is designed to maximize airflow around your handmade soap bars while minimizing the footprint on your counter. It is specifically sized for ten bars up to 8cm high, 4cm thick, and 7cm wide , though it works…
On its own this model if of few uses, the idea is to use this model as a base to suit your tube clamping needs. This is made easy by the parametric design. Printing is easy as well since its print-in-place. M4 Hole, compatible with…
Designed to hold Warlayer 4.0 flat pieces upright, allowing for better curing. Print in whatever material you'd like. For less contact, set to 50% infill and 0 top infill. Cut and superglue in paperclips to form dividers.
Designed to cure models up to 180x160x100m with a turn table and UV strip led light. You may print or find a 10mm-diameter pipe with 300mm length to fit with the mounts.
Needed to have both resin and UV-light together, as I am too lazy for searching. LOL. Not much to add. Printed on my MK4 with Geeetech Silk Silver. Explore my other Printables: https://www.printables.com/de/@Tritschi
Insert bracket for a 15W UV-LED by Onforu to build a curing box from a dehydrator Print instructions Category: 3D Printing Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 10%, Gyroid…
A pin to secure long skadis hooks so that they can hold objects
Here is a pair of fronton protectors for securing the transportation of your pinball machines. I printed it in TPU filament with an infill rate of 15%. The print scale may need to be adjusted slightly.
This is a directed shroud for a super bright 60W 405nm UV resin curing light found on Amazon (https://www.amazon.com/dp/B07X5VT56K) that I use when applying 3D printing resin to 3D FDM printed parts to help cover over seems that can be…
