Liczymy pasujące modele…
Those brave souls who risk madness and worse to keep the web (mostly) organized and stylized. They deserve all of our thanks, but also perhaps just a bit of good-natured ribbing. Print this model and give the CSS guru in your life the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
I had so much trouble printing the original trophy plaque, so I decided to design a simpler and more solid one, which is printable without MMU und supports. You can find the original trophy from OversizedHat here .
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu
Fits top part as normal but this version has a hole in the bottom to allow for the 1TB NVME with heatsink which does not fit in the original case bottom.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED
Wydruk około 1,33 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No tools necessary to assemble. Print 4x ring, 4x pin, 2x arc_wo_wall, 2x arc_w_wall The space between the walls 16mm Diameter of the ball I used in the video is 15mm
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nucleus Development Hive This project was created to develop a small hive specifically intended for the development and growth of a bee colony. The hive has been designed for 3D printing and, in the main version, makes use of practically…
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement cap for the plastic lid of a steel developing tank. I've printed several of these in ABS and TPU. The ABS version secures with a more satisfying snap. Fully parametric FreeCAD file is included, so you can easily adapt it to…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
This is a Xiaomi Thermo Holder for the eSUN eBOX Lite . First of all, I’d like to thank the creator of the original model: https://www.printables.com/model/274551-hygrometer-for-filament-dryers-sunlu-s1-and-esun-e I simply modified that…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
I printed this in SainSmart TPU, but ABS or other hard materials work pretty well too.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
I couldn't find any existing models so made this dispenser to peel and hold Noritsu / Fuji style twin check stickers. I actually use these to keep track of my film from shooting, through development to archive. The roll sits on the holder…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
This hanger fits into a peg board with 1" spacing. It has hooks for the tank, the lid, and the lid cap. Very specific, I know, but hopefully someone else finds this useful.
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
I developed this as a tool to provided sensor inputs that would drive 4, separate relay outputs from a 30 Vdc PS. It uses a RPI3b, a 5 Vdc buck converter and a quad relay module. It also includes a 2 line LCD display
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This keychain was designed and printed during the 3 day 3D printers assembling and operation workshop for students conduced by Make3D Company Limited and Prusa Research in The Gambia. The project fucused on "Supporting socially beneficial…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
A protection for the Victorinox Fibrox cook's knife. It may work for other knives too, maybe with some small adjustments. You can easily print it standing on the thicker long side or on the top side. But you should use brim!
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…
See https://www.amazon.com/gp/product/B0811KLGDD/ref=ppx_yo_dt_b_search_asin_image
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
dev drum for 4x45 or 2x810 sand edges of the mouth for better sealing. You might need a pump to open the drum (same as jobo expert drum) for gear nozzle, you might need a 59*1.9 (outer diameter * cs) o-ring. tutorial V1.1 240428 Re-export…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
I split the trophy itself into sections so each can be printed with minimal or no supports and can then just be glued together meaning less waste and a cleaner looking end result I also extended the text to be the same thickness at the…
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
Developing 8 sheets of 4x5 film at a time. Print with PETCF for best performance. PLA is too crunchy PLA+/PETG/ABS are too soft ABS-CF should also work. Category: Camera
IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…
This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…
[CZ] Upravený držák na DIN lišty ( https://www.thingiverse.com/thing:3433772 ) doplněný o úchyt tří komponent SIEMENS a tří 5mm led pro případnou indikaci stavu. [ENG] Modified holder for DIN rails (…
Update 2: Added a new version titled: “if (fire)” Update 1: Added a new version that ends with “git out!” Inspired by a post on r/ProgrammingHumor, I wanted this In Case of Fire sign for my programming shop. For non-programmers, Git is a…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
MaciaT's developing tank worked really fine for me. It printed watertight in ABS+ without any acetone smoothing. But I had difficulties loading the film in the dark. A comparison to an old spiral showed that the grooves used to be much…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
This is 4x5 single sheet daylight developing tank. it requires 150ml of developer. You can easily load sheet in the dark bag and develop it at the daylight. For fixing and washing i recommend to use a small tray, its amazing to watch the…
Basically it's the " World's Best CSS Developer " Trophy" made by OversizedHat , but I added some small improvements, so that I'm able to glue the parts together, instead of wasting printing time, filament for support structures and the…
I stole the design from the eTone 4x5 holder photos and made this thing from 1.6 nylon trimmer line. Added flexible joints instead of screw. I prefer this simple 2 sheets holder because of x-ray film stiffness and emulsion fragility. Fits…
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
Mounting plates/covers for M5Stack Atom Lite ESP32 IoT Development Boards. I use these awesome little and cheap boards for measuring water levels in my tanks, light control, remote buttons and more! I couldn't find any covers. cases or…
This model is featured in figure 7.4 of Visualizing Mathematics with 3D Printing . Category: Math
I could not find a case that would fit my ESP32 that I found on Amazon, titled “HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board” There was a model that said it did, but in fact it did not. Simple re-scaling just made new problems…
Printing with PLA is recommended for optimal strength. No supports needed. I also suggest printing 2 or 3 pieces with variant colors for different chemical substances (developer, stop bath and fixer) to avoid mixing chemicals.
I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film. I made a version specifically for my Jobo dev tanks, and got a lot of feedback from people asking…
| BASIC DESCRIPTION | development cards for the base game and seaferers expansion for the base game you need: 14 Knight cards 5 Victory Point cards 2 Year of Plenty 2 Monopoly 2 Road Building for the 5-6 players base game you need: 20…
Connect the TicWatch Pro 3 to USB using this dock and pogo pins specified in the attached image.
this is a model to enable the home development of super 8 motion picture film. it holds a single cartridge (50 ft) of super 8 film emulsion side out in 3 layers. printed in transparent material enables fogging using LED strip lights…
Material: PLA Layer Height: 0.20 mm Infill Density: 30% Wall Thickness: 1.5 mm Wall line count: 3 Build Plate Adhesion Type: Skirt No supports
A 3D printable case for KIISU Development Board V4A by Rainwalker. A fun credit card sized development board that is compatible with Flipper Zero firmware and features some additional sensors and functions. Learn more about KIISU:…
Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.
A small thin case for for the Kiisu v4. See https://kiisu.io/ for more information about this board. less than 90 x 58 x 8 mm without the lanyard/keychain part Uses the acrylic piece that ships with the dev board No hardware, snaps…
我们使用高精度 3D 扫描仪对 CR-Scan Raptor 进行了细致的扫描，创建了精确的 3D 模型。此模型旨在帮助开发人员和工程师更好地设计和制造 CR-Scan Raptor 的各种配件。通过这个详细的 3D 模型，您可以彻底了解设备的各个方面，为配件开发提供坚实的基础。立即下载并开始您的创新之旅！
Big Chill Twin Engine Build *** Developer Page *** !!! This Build does not meet the same easy to build and dependability standards of other Black Crow models. This is for people that like to push the limits !!! This is a modification to…
This is designed to motorize agitation on a Paterson film development tank. I based it on my Universal Film Developing Tank. It has teeth to mesh with the teeth on the funnel to mount a 28BYJ48 stepper motor above a 3D printed shaft. The…
A CORE, or compliant rolling-contact element, is composed of two cams joined together with multiple complaint flexures. Tension develops in these flexures as the cams roll in contact with another; this holds the cams together. This motion…
Development tank for large format sheet film 13 x 18 cm ( 13x18 ). Fits 8 sheets. Printed with PLA and then coated with epoxy, as liquids are poured in . The inside holder is intended also as a drying rack. Also I upgraded the inside…
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…
Use any printing material. PLA seems best. Print settings are nozzle 0.4mm and layer 0.2mm or 0.15mm. The frame fits all common 7" e-inks. The control board is specially used based on esp32 - ESP-INK . Description of the connection,…
I needed a taller set than the previous, to allow for the longer ballistic tips. These are approximately ¾" taller.
I will continue to upload files as I modify the rest, howeveer for now it just has the buster sword. make sure you download the right files, they are named and made specifically
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. This case is made to fit the MH-ET LIVE ESP32 Development Board. https://www.aliexpress.com/item/32814642296.html?spm=a2g0s.9042311.0.0.27424c4dCeXuj0
Print without support. Box and lid
Case to hold your 3.5" TFT Arduino screen
If you search you can find a lot of development boards, but of course no one which combining Raspberry and Arduino and/or ESP32. Im using those boards, that s why Ive made my own board for Raspberry Pi, Pi Zero, Arduino Nano, ESP32 and…
There are as many cases as there are ESP32 derivatives it seems. Didn't see one I liked so made my own, inspired by Thomas V's https://www.printables.com/model/612413-esp32-case 2 versions, the newest looks the neatest but takes a little…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
Use any printing material. PLA seems best. Print settings are nozzle 0.4mm and layer 0.2mm or 0.15mm. The frame fits all common 7" e-inks. The control board is specially used based on esp32 - ESP-INK . Description of the connection,…
A compact tool designed to simplify loading 35mm film onto Paterson development spirals. Ensures smooth, frustration-free loading without damaging the film. Quick to print and easy to use—perfect for analog photographers!
First working 3D printable enclosure for the brand-new NVIDIA Jetson Thor Developer Kit! Features (free version): – Simple press-fit / snap-fit design – Open bottom (rubber feet sit on desk) – Minimal supports required on port holes only…
Basic forms por babys. Make sure you use a suitable filament for babies and that your printer has no traces of other plastics. Category: Toys & Games
There are many reels like this out there for Paterson tanks. I prefer steel tanks, so this is my version. Print 2 each of Plug, Top, outerTube, and Teeth, and 1 centerTube. The parts should press fit together. Depending on your printer's…
Because we should all show off how good we are at developer'ing
I needed some funnels for film processing. I couldn't find any vase mode funnels I liked (and that would print easily), so I designed my own. While I was at it, I added text to make sure I'd never confuse them and contaminate my…
This is a quick holder I made for a couple of LED lights. It holds an ESP32 development board and a 5.5 x 2.1mm power barrel connector from Amazon to power LED ws2812b strip lights. I made it big enough to hold the ESP32, a barrel…
I streched the model for connecting the antenna
Use any printing material. PLA seems best. Print settings are nozzle 0.4mm and layer 0.2mm or 0.15mm. The frame fits all common 7" e-inks. The control board is specially used based on esp32 - ESP-INK . Description of the connection,…
6 developer themed keychains including: git, github, python, vscode, tux and the arch linux logo
Spiral for developing sheet film 13x18 cm (5x7 inches). Suitable for Paterson Multi-reel 3 tank. Holds 4 sheets of film. Developer consumption: Standing development – 980ml Rotation development – 500ml Consists of 3 parts that need to be…
This is inspired by Gridfinity Generic DevBoard Holder . I didn't need the half grid base, which slows printing time, and the tallest bin there is 3 Gridfinity units, which doesn't work for boards that have stacking headers, or breakout…
Prototype form my crane mount. Updates will be posted here.
This is a simple enclosure for a ESP32 and development board. It has a snap fit lid, And the board snaps into place. I made it to house my WLED controllers
TimeCrypted is known for working on games at PARAC0RE Games with their team & he is working on a tower defense game.
