3387 modeli
To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…
Wydruk około 12,97 €–15,86 € nettoWstępna wycena jednego wariantu
The stock Elecraft AX1 and AX2 clip for the bipod is very stiff, difficult to attach, and hard to remove. At the request of a fellow op, I designed a better one. Here it is. Print in PETG for flexibility and durability. Print the clip…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Wydruk około 7,00 €–8,56 € nettoWstępna wycena jednego wariantu
This little bracket makes it easier to construct an ultra-light directional radio antenna using aluminum arrow shafts. The bracket slips onto an arrow shaft which acts as the antenna boom and allows simple attachment of arrow shafts to…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BACKGROUND: A little bit of gain can make a big difference in an HF radio antenna, and one of the simplest and smallest gain antennas is the Moxon Beam. Now you can easily build yourself a portable one for the 10 m band with some 3d…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a design I whipped up to provide stabilization for the BNC connector on an IC-705. It utilizes the ground lug and the little handle thing on the back to provide 2 points of solid connection. Print instructions I printed this with…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Simple & lightweight Yagi antenna for the 70cm band. Developed in conjunction with the ‘Touch The Universe’ project . Required hardware 3.2mm aluminium welding rods 4mm brass welding rod 25mm PVC pipe ~3mm self-tapping screws superglue /…
Wydruk około 4,35 €–5,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple casing & mount for Mini-Whip antenna from AliExpress, link here .
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Funkamateur MiniWhip encloser to be used on a fishpole. Diameter hole for fishpole is 5.5mm Printable right up, supports are needed only for the lower parts, block te rest. I printed with PETG Desert storm matt from brand Spectrum. 0.2mm…
Wydruk około 5,12 €–6,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hairpin Line Isolation Mount for Hy-Gain Discoverer 7-1 (40m Dipole Antenna) Replacement hairpin line isolation mount specially designed for the Hy-Gain Discoverer 7-1 (40-Meter 1-Element Dipole Antenna — Order No. 371S). Original…
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3D print elements for Double Bazooka antenna. Use RG-58 and 300 Ohm ladder line. Designed for UHF connector. I printed my elements from black PETG, you can use ASA for A class durability. I recommend filling boxes with epoxy resin in…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Obviously print with something that will weather well outside (ex: PETG). I used organic supports and they worked well and were easy to remove. May 2026 I added a 4" OD pipe mount. I used zip ties to attach mine, but I think it should…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
VIOFO A229 rear camera mount for a Toyota Sienna. Print with PETG, on its side, with supports.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use Velcro or double-sided tape to secure the electrician's cable ties to the model and, if necessary, provide greater security. for the antennas fixed with heat-shrink material.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an holder for the antenna (calculator) of the direct TPMS for VW/Audi cars. Best use is when you retrofit the direct TPMS system. Like this no need to put the antenna in the rear bumper as OEM, you can put it in the trunk next to…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Overview: This is a specialized antenna mount designed for securely fixing a 28.5mm diameter fiberglass LoRa antenna to a 100mm round drainpipe. The mount is ideal for outdoor installations, gateway setups, or any scenario where you need…
Wydruk około 5,74 €–7,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
La base magnétique n'étant pas assez forte, j'ai réalisé ce support qui permet de visser l'antenne avec une vis de M5 à tête fraisée. Antenne disponible ici :…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you wish you could attach something to your Arrow Antennas Yagi boom? Look no further! Print in PETG. Use a ¼" 20 - ½" bolt.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The STYLE COLLECTION HOME Vienna candle holder with its beautiful and subtle design will bring elegance in to any setting. Use with both pillar candles and smaller candles. The Vienna candle holder is the candle holder solution that you…
Wydruk około 21,62 €–26,43 € nettoWstępna wycena jednego wariantu
**En français :** "Support d'Antenne Zigbee Sonoff : Installation Discrète et Optimisée !" Améliorez la performance de votre antenne Zigbee Sonoff avec ce support innovant et esthétiquement plaisant ! Conçu pour s'intégrer parfaitement…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Adapter to mount an Arrow dual-band antenna on a Discovery Drive azimuth/elevation rotor. The handle of the Arrow goes in the slot, and the base plate bolts to the Discovery Drive's rotor plate. I used a prototype Discovery Drive with…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena jednego wariantu
Printed with PLA+, 0.28 layerheight, 15% filling and minimal support. Has mounting hole at the bottom to fasten the Accsoon with regular 3/8 bold
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Heltec v3 case for 8000 mhA battery + on/off button + 2 part parametric antenna mast with insert & cover Designed to test different locations & antennas for a few days
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Small wheel for shortening this TV antenna . It's used on campervan, but can be used anywhere. Might need a bit of modifying, because the teeth don't allow the antenna to stay paralel. Printing instructions Layers: 0,20 mm but doesn't…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
For FDM - use the separated floor variant. I recommend 4% scale. This is an all-original model I designed specifically for 3D printing. I've tried to keep the assembly as simple as possible. There's an additional folder containing the…
external micro antenna mount for uconsole
MR (ANT) TENNA FROM DELTARUNE
This is a set of files to build a 2m and 70cm moxon antenna. Inspired by David (DL1DN), known on youtube as “QRP lifestyle”, but his design was not available for DIYers. So I decided to design it from scratch and pusblish it for others.…
Antenna end insulator, for attaching end of wire antennas to support lines. Designed for print-ability, structural strength, minimal chafing of wires and lines. When printed at 70% scale (recommended size) or more, exceeds typical support…
Easy to use compact and lightweight endfed antenna for HF bands. Deploys in seconds – ideal for POTA activations and preparedness scenarios. Requires use of mast, tree or another raised point anchor point. BNC male connector. Short run of…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…
Altered the design so that the connectors have space as well as the cables. Also the back is enlarged to match for the thicker footprint of the board. The buttons are slimmer, the reset button is harder to press.
🇦🇹 Willkommen in Österreich! Welcome to Austria! The main façade of the Vienna City Hall , in collaboration with ZODIAC , is a milestone of MiniWorld3D. Breaking all boundaries, it was conceived to push you and your printer to the limit!…
There are a few options with this one, mainly due to requests and iterations. there is an option with and without the hinge. there is a v1 and a v2 of each as I didn't like the wobble on the plates. and there is also an option to have one…
Přeneste si kus historie motorsportu přímo na svůj stůl! Tento detailní 3D model reprodukuje ikonickou přilbu Ayrtona Senny z roku 1991 – sezóny, kdy závodil za McLaren-Honda a zářil svým nezaměnitelným stylem na trati. ✨ Vlastnosti…
Full tutorial to be found on the RAspberry Pi website .
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…
Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…
3D scan of a taxidermized specimen of a Cuban Macaw, or Tricolored Macaw (Ara tricolor), created by the Natural History Museum of Vienna under license CC Attribution-NonCommercial . This parrot species was native to Cuba and the…
Need a way to store your lightweight wire antenna for Summits on the Air or Parks on the Air activations? This winder fits 70 feet of 26 ga wire or smaller for a 40 m end fed halfwave or random wire antenna built from one of my kits from…
Seii-Radiomaster_Boxer_Antenna_mod_adapter_v7_PETG - I took Bikernickmn's model and just polished that widest square piece because it was damaged in the original file. Also, whole file is not properly centered by the original author and…
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
Material: Pet-G or ASA 275 or ABS
Ground Plane Antenna 868MHz (or for other frequencies like 433MHz or 915MHz) for Meshtastic or anything else i used 1,5mm² (1,4mm diameter) copper wire to find in Europe in the standard NYM cable or AWG 14 or 15 in the US -stretch the…
These are designed to slip onto a thin metal headband. Printed in PLA at 100% infill with print thin walls enabled.
I designed this Shark Fin Antenna cover to replace the OEM degraded Antenna Bee sting in my Mitsubishi ASX. Printed in Dark Silver which matches with the car color. Print in PTEG for heat and weather durability. Printed without support.…
3D scan of a juvenile American alligator (Alligator mississippiensis) created by the Natural History Museum of Vienna under license CC Attribution-NonCommercial . Alligators are native to the southeastern United States and to northeastern…
This is the model used to make the torpedo in this video: [video link]. It's very much a prototype - the final model had quite a few post-print modifications made to it. If I get time, I'll detail those modifications (that could probably…
Remix for use with Meshtastic Requires SMA crimp connector, a piece of heat shrink tubing, and RG174 cable or similar diameter. Glue the connector with the crimped cable into the antenna using 5-minute epoxy or another glue .
I was unable to find a suitable model for an ELRS antenna holder that fits the GepRC Mark5, so I made my own. Additionally, I designed a version that allows for spacers, made of a more robust material like polycarbonate (PLA would…
The part accepts a BN-220 GPS module, a standard vTX pigtail with a flange mount, and standard 3mm antenna tubes (included with the Mark5 frame kit) Prints without support. Can be printed in PETG or TPU, depends on what you prefer. Photos…
3d printed case to DIY build your own dipole antenna. It will fit up to RG316 coax size pigtails.
If you are a Senna fan like me, this model is for you. This model consists of many parts. You can print each one in separate colors and combine them easily. You only need to apply a color change on the part with the Senna signature.…
A simple antenna mount for the T-mount stock IMRC Ghost receivers antennas. For QUADMULA SF3 To install the T-style antenna into the Mount, slide one side of the white part of the receiver into the mount, then flex the mount to about 90°…
Bracket for mounting an SMA antenna socket for different applications. In my case an ESP8266 with u.FL socket and external antenna. Socket with external hex locks by itself into housing. Therefore easy mounting No supports necessary.
This model is compatible with the lego system.
I needed a mount for a single SMA adapter, an 18mm x 18mm GPS, and an XT60 connector. There was no such variant among the models provided by Speedy Bee, so I took the closest original model, which already had mounting for the XT60 and SMA…
All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…
Can not be used by katcaps
3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…
Designed to be Printed on an FDM. Make sure Detect Thin Walls are enabled. There is a bevel in the sides to make location of assembly easier. Make sure the model is printed flat on the build plate with the thickest part of the bevel down.
I loved the design of the slim snap-together OrangePi Zero 3 case by Gerber but I also wanted the antenna mount from the case by TheParanoidEngineer , so I combined them :) Make sure to route the antenna cable through the notch in the…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
Hey there, I have created this model to upgrade my GPRC Mark 4 frame with the new DJI O3 air unit. I have made 2 Version: Version 1 with DJI O3, antenna and GPS mount: The bottom left and right part to hold the DJI O3 Air Unit in place.…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…
Camera mount - print in PETG. Antenna mount - print in hard TPU (70 D or harder) and use cable ties to fix antennas in place. Supported camera ange is from 0 to 30 degress (the mount is slightly in frame at 0 degrees). When printing…
Designed this for my /P operation. Top hole allowes it to hang in inverted V setup BNC Connector compatible Donations for new trx are more than welcome via paypal
This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…
I created this antenna winder for SOTA activations, but of course you can use if for non-sota activities as well. The winder serves a second purpose as a strain relief for an endfed antenna and the paracord used for fixing the antenna to…
This remix adds a clip for a Female BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio…
If you don't have a printer, I do sell them(velcro included) on my site for cheap with free shipping for those in the USA. https://shop.ke9bos.com/ This is something I made for my ham radio adventures. This has been really helpful for me…
Design of Ayrton Senna F1 Helmet designed in Blender by me. If you want other file formats comment here Category: Vehicles
use vhb tape for antenna
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
This remix adds a clip for a Male BNC connector. The position of the clip will work with both the QRP and 20 W versions of the K6ARK Portable Radio antenna kits. Unable to find a good antenna winder for portable amateur radio operations,…
Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
I modified my Packtenna EFHW to work on 20m and 40m with a extendable link. I got the idea from a K8MRD video, but didn't care much for how he had the organization (both wires on the same winder). I've got this winders profile setup to be…
So for those that have been following me for while on youtube and TinyGS, here is another treat, I have been working on multiple versions of a modified QFH antenna to get the smallest size and while keeping decent performance. This file…
Guy Insulator for antenna towers, guy lines, sailboat back stay antennas, and anywhere you may need such an item. Designed with 10mm hole for your line or wire. Easy to scale to whatever size desired. I like 100% and 80% for my needs. If…
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
Simple housing with sliding lid with a secure “click” closure. Many thanks to TuTu for the fantastic template! Hint: Switch off via the meshtastic app, switch on by pressing the reset button. This saves an additional switch. Battery: I…
Insulator for wire antenna. Can be used as tension relief on the feedline side and as insulator on the supporting side. Also works as apex insulator for delta loops, inverted L, etc. If using 14 AWG knotting the antenna wire is not…
Original design by by LY3LP, recalculated by George M1GEO Dimensions and design: https://www.george-smart.co.uk/antennas/dual_band_satellite_yagi/ How to print: Element holders - 4 perimeters 20% infill no support - 6 Pcs Radiator holder…
A small antenna stand for propping up antennas with sma connectors. Set up your sdr or handheld radio antennas in a better position easily with an sma-antenna cable and this simple stand. Printing: Printing upside down is recomended to…
A remix of the uConsole micro antenna 0.2 mount model for a countersink screw plus a mount for the other corner.
A set of polygons/prisms to remix to make beautiful things. Use them to make your own model or decoration. You can find: Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Ennagon and Decagon. Feel free to like, download and follow.…
Slightly remixed case for a ESP32 with external antenna (works great with ESP32-WROOM-32U). I have messaged the original author and he's OK with posting new model. Added ventilation holes on both sides and modified the lid, which is now a…
I designed the mounting parts for this field-assembly antenna to be strong yet easily taken apart for transport. The “boom” is 20mm pvc electrical conduit, and the elements are 6mm solid aluminium rod. The mountings consist of a threaded…
The proposed solution is antenna winder which integrates UNUN in the center and contains two compartments, in first one thin coax cable such as RG174/U of length 2.5m and ended with BNC connector is wound, while in the second one the thin…
Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
A QFH antenna has an omnidirectional pattern with enough gain to operate either on the uplink or the downlink for communicating through the various amateur radio satellites that use the 2m and 70cm bands. These 3D printed parts can be…
From May 2026 availabe mount for motor rev F5, TNX OK1GOD! Four predefined sizes (S,MS,M,XL) M size max torque 2200 kg/cm (215 N/m) without destroy Included terminal for install motor from cordless drill Without nuts (tapered holes) DXF…
This is a remix of the Quadrifilar Helix Antenna by @ jhsandell for 1090MHz (ADS-B) The following updates have been made: The 'bug' that jhsandell noted where the code was using diameters rather than radii has been fixed This version…
