158 modeli
Due to the need to print as many of these as possible, as quickly as possible, this is a version of RC3 that prints faster (and uses less filament). It still retains a measure of comfort because part of the band that sits on the forehead…
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Features: Open/close Idler-unit without tools Idler-body locks with Snap-locks Original screw, spring, spring movement etc. Easy to exchange with original Idler-body Filament sample holders, and number imprints Easy assembly/disassembly…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATE: GreatScott!, a large electronics YT channel, has made an FPV build guide using this frame! Check it out here: UPDATE: I have added camera mount 30mm and rear mount 30mm, as requested by a user UPDATE: I have added STEP files and a…
This is a nice sturdy case for the Raspberry Pi 4 Model B that has all the features I wanted to see: Pi drops easily into place, then is secured with M2.5 self-tapping screws. Top clips on securely, but is easy to remove. Vent holes for…
Inspired from the new Juggernaut Tactical Featureless grip . I used the same grip angle as the JT grip just in case anyone was curious. EDIT: Model V1.1 uploaded, fixes fitment issues with thumb rest and lengthens bolt interface area.…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
Contiguous United States (Lower 48) Topographic Map with Hydrographic Features For those times when you just want to print everything at once – this is the lower 48 states in the USA of Plastic project combined into a single model. Lower…
None of the saw guides I found on printables had a proper clamping feature, so I added my version which has 2 cutouts fit for small screw slamps. I use Bessey 100x50 clamps. Suitable for 1mm thickness saw blades (slots are 1.2mm wide)…
Washington, USA (WA) Topographic Relief Map with Rivers and Coastal Waters Washington, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
California, USA (CA) Topographic Relief Map with Rivers and Coastal Waters California, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Idaho, USA (ID) Topographic Relief Map with Rivers and Coastal Waters Idaho, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic collection…
Colorado, USA (CO) Topographic Relief Map with Rivers and Coastal Waters Colorado, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
I wanted to print name tags for our presents. But I wasn't able to find any that suited my needs. For that I've created these. Everyone can use PrusaSlicers Text feature to add a name or message (you might want to scale it for longer…
Oregon, USA (OR) Topographic Relief Map with Rivers and Coastal Waters Oregon, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic project…
Florida, USA (FL) Topographic Relief Map with Rivers and Coastal Waters Florida, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Features added, to make the painting easier, or multi-color print. Also added the original CAD file, and if you know how to use solidworks you can make a sad sloth, instead of a happy sloth. No support needed for me, but perhaps for you.
I printed the original part from bonzai000 in 150% size, reworked it (cut bottom part into two halved horizontally for better printing. Supports are a real PITA. Hapy with the result? NO. Further rework - I enlarged the tank and divided…
Changelog: 12/02/2025 Added a 6+R version. Look for the “_6R” files. I checked everything in cad and it should work just fine but I did not personally test print (tested by c4tkybnm, check the makes). It may look a bit weird because I…
I came across a few of these laptop holders, but none of them could be stored together and if they did they did not lock in place. Therefore I made my own and first try it worked. You can insert one of the holders to the second one and…
LxW Basic Plus – A Feature-Packed mATX Case This project was designed to bring powerful mATX builds into a compact, well-optimized case—without sacrificing compatibility. It supports mid-range to high-end components, including full-size…
Massachusetts, USA (MA) Topographic Relief Map with Rivers and Coastal Waters Massachusetts, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
Since I've moved from Fusion360 years ago, I've implemented a feature scripts in OnShape to generate gridfinity bins & bases: https://cad.onshape.com/documents/f307f8af01083b99b55bbcf9/w/e62d7ab7a660a796bb9461a7/e/10837cead0dddf47a9b60a3b…
Due to the need to print as many of these as possible, as quickly as possible, this is a remix of RC3 US version, that prints faster (and uses less filament). It still retains a measure of comfort because part of the band that sits on the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Inspired by an idea from @3DBrooklyn, I came up with this design that is easy to…
As with earlier "Slim RC3", the idea is to decrease print time and material use, while still retaining long term comfort for wearers. The RC1 in this case is for those that have smaller print beds that can't accomodate RC2/3 size, or…
Used a small water bottle, and hot glue to make a small reservoir which a humidifier pump loads. Adjust the height of the bottle to change the pressure (just a few inches above the model). The small nozzle may need to be printed with brim…
Be sure to print 2 ski files. Scaling may be necessary for skis because of finger hole (original hole size is 12mm x 18mm). If you scale skis, you may want to scale the jump and rail, but it is not necessary.
This is an addition to my slicer test file collection: An object containing two wedges, one with an angle of 5°, and one with an angle of 15°. Since the standard threshold value for the new Arachne feature (introduced with PrusaSlicer 2.5…
This is one of three options I've made available for Bowden PTFE Coupler C-Clip for the Adventurer (AD5M) Runout Sensor. Kudos & thanks to Vance Howard for the suggestion. OPTION 3 of 3 — TETHER to TUBE edition — Prints in TPU. Easier to…
Connecticut, USA (CT) Topographic Relief Map with Rivers and Coastal Waters Connecticut, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…
3d Drums: 24" Bassdrum - Sci-Fi-Style: Unique features... unique look... great sound - professionally sound checked... 24"=60cm. Printed 3x yet. On Pro-XXL-Printers. ABS, ASA+Carbon. With infill or solid… No support needed… Sounds great……
A cascade water-feature suitable for a side table or other "objet d'art." Designed to let you customize the height, width, components, and more. Requires a small aquarium pump or equivalent to drive the water. Print Settings Printer: Anet…
I print a lot of PETG and TPU, but I couldn't find something quite like what I needed so I took a bunch of other ideas, chopped them up into little bits, seasoned liberally with magnets, and somehow managed to create something useful in…
The Ultimate Space-Saving Clothes Hanger with Innovative Features Transform your laundry routine with this innovative foldable clothes hanger designed for maximum versatility and convenience. Key Features: Space-Saving Foldable Design…
This design takes imo the best parts of gmelikov, Lok and 3Doodler's remixes of Qaz's amazing original to create one which strongly grips onto the win max 2 with the qol features of the other remixes. I've read a lot of comments about the…
Introducing the Pipes Bath Toy with Interactive Features, a fun 3D-printed design file that turns bath time into a creative adventure. Kids can mix and match colorful pipes to create unique water pathways, sparking imagination and…
A 3 part enclosure for LM2596 DC-DC converter series. The LD2596 module's main task is to provide a lower voltage for a secondary circuit. For example from a 3D printer main power supply, from the 12-24vDC main power to the 5.3vDC…
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot. The foot just has to be cut down by at…
🐒 Monkey Palace – Card Organizer (Remix) This is a remixed and improved organizer for the board game Monkey Palace . I redesigned the original idea to better fit real gameplay and 3D printing needs. 🔧 What’s improved? Lower profile – fits…
I reworked the 'Incense holder' into a water cascade. The basin will accept most any small aquarium pump. Use a small length of tubing to feed the output into the inlet at the bottom of the main structure. Adjust the flow rate as desired.…
A remix of the original model with extrusions in place of the cuts for the face features intended for two color print. It can work for either normal or glowing filament.
This is a Remix of the original Prusa “ x-end-idler-R2.stl ” for the MK3.9 and MK4. I added a feature to allow for smooth rods removal without disassembly of the whole x-Axis-Assy. Due to the fact, that Pursa is using M3x16 Screws as…
This is a remix of: Easy AAA Battery Calipers Mod by Fyreguy https://www.printables.com/model/499393-easy-aaa-battery-calipers-mod Replace a 357/303 1.5 V watch battery with a long lasting AAA. Ideal for cheap calipers with poor battery…
A small square that fits in small pencil cases. With it, you can measure distances and angles, but also trace parallel and vertical lines. Bonus: Simple Normal Parabola Stencil Dimension square: 2,2*60*118mm Dimension Parabola:…
I added some cool ne features to the great tracklib .. hopefuly this features will reach the github from the original .. Category: Mechanical Toys
I recently designed a candle holder and had difficulty finding a suitable material for it, as almost any material will ignite in combination with the wax. But before I ordered expensive special filaments, I first thought about how I could…
Scrooge McDuck-Inspired Piggy Bank with Night Light Feature Embrace the charm of Scrooge McDuck's Money Bin with our unique piggy bank, featuring a creative "Money Wall" to avoid the emptiness of a new bank. It includes a plug for a…
This is designed to fit in the Bonus Features box for Final Girl. It has spots for all of the season 1 and season 2 miniatures. Sadly, there is no room for the vignette girls. Printed with .40mm nozzle at .20mm layers with 10% infill.
Huge Thanks First off, huge thanks to @ansonl for the great “ Washington, USA (WA) Topographic Map with Hydrographic Features ” model! Changes This is primarily just a 3mf set-up for Bambu printers with an AMS, however, I did increase the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Use case and features Use this angle bevel whenever you need to transfer an existing, unknown angle to a new working piece. It is ideal for laying tiles in a room with non-90° angles, doing woodwork or making any strangle formed pieces…
I have designed this model to test stringing and my part cooling fans as I noticed the fan ducts on my H2V2 extruder was not enough. use your normal print configs to check the quality and then inspect the several points for overhang,…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Hi! I present the bar system that I developed for the table at my desk. A few words of explanation in engineering words: after a long phase of prototyping, I came to the conclusion that the best system for quick assembly / disassembly…
A remix of Laurentiu Bogdan s Sonicare electric toothbrush case. With the added groove the base locks shut so the toothbrush doesn't fall out easily. This was printed on a Bambu Lab P1S with their PLA, 0.2mm layer height and three wall…
This “Hydroponics” planter with water feature is designed to allow users to print multiple sections to make a planter with a water feature as tall as you'd like. The only thing you'll need outside the printed parts is some filter…
This is the step file to make your own attachments for the 3DReefing Frag Scape System. The angle is 49.1 degrees. The step models are laid upside down. While I do not permit the sales of the actual Frag Scape System parts, I have no…
Flexi cat Jiji from the cartoon Kiki's Delivery Service. Remixed to be one sided and have more pronounced features.
Mount with M3 Nut holder feature and a more polished Tube Spacer. It is easier to install the M3 nut now, thanks to the nut holding feature. Tube spacer has some chamfers to make it printing nicer.
Its a Zen garden with 3 spots the 1st one is quite authentic with its decorations the 2nd one is ayin and yang inspired design the 3rd one has a auto raking feature. it also comes with a modular arm that you can use for raking the sand it…
I was inspired by Slant 3D's sample brick (video link below). I couldn't find another like it, so I made my own version. 30mm x 30mm x 92mm, basically 3 stacked 30mm cubes with various features to demonstrate how features will appear.…
This is a remix of a cool design by: https://www.printables.com/@mxnthmlln_2160638 but with an added hole on the cap section to mount a keychain, or place around neck, wrist, backpack, etc. Attach it to something easily accessible so…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Flexi cat Jiji from the cartoon Kiki's Delivery Service. Remixed to be one sided and have less pronounced features.
UPDATE: added a 55/45 split that's a good fit for the Volkar Killer, with it's unusual small-card count. UPDATE: added lid files ("stock" fits either, but “printed” is a little more snug on the printed trays from this design). This…
This Remix uses 2x 10x2mm magnets and a roughly 9mm long piece of TPU filament as Anti-Slip feature. Installation: Cut a 9mm long piece of TPU (or similar filament types) from your filament spool and glue it into the slot of the hook.…
This is a quick model I made for a friend so he could attempt to improve his ability to print small or fine features. Not sure if it will be useful to others or not, but I hope it is! If anyone would like me to add the dimensions of the…
This is my simple remix suitable for dual color prints, all credits to @RichardD_112870
To create a table wakeboarding miniature, I have recreated the features of my cable park (Wasserski Salzgitter). They are mainly Unit Features. I have taken the measurements of the official catalog for length, height and width. However,…
OK, I know that there are quite a few dog bags holders on Printables. But I missed one important feature among them - when you pull bags out usually it is not very convenient to roll them back into the container. Here is a holder with a…
I wanted a bottle storage for 2 bottles with a simple wall mount feature via screws. Printed in PETG with support on buildplate.
Thank you @jrichards222 for the original model. I added a recess for the camera so it would prevent rotating from cable strain, as well as added a cable route through the clip hole. I recommend adding hook sided tape to the bottom side of…
I wanted a 3d printed Rock feature for the seas of havoc board game, so I modeled one by smooshing a bunch of other rock stls together. Its roughly in the ring shape that the standard cardboard token displays. With these, it is better…
This cookie cutter set includes a cute reindeer and a stamp for the nose, eyes, and mouth, perfect for customizing each cookie in a fun way! An ideal choice for Christmas celebrations, it will bring joy to both kids and adults.
The spool easily screws together to accommodate the sample scroll. The locking feature ensures easy spooling of lefterovers from larger spools that takes up unnecessary space or samples. Measurements: Inner diameter: 70 mm Outer diameter:…
This model is compatible with the lego system.
Github repo: https://github.com/QQuark/v-core-3-template-extractor What this is An OpenSCAD file allowing to extract areas of the panels of the V-Core 3 enclosure, to be for example 3d printed as router templates. The result is provided…
This is my second ever creation in a cad program, it seems to fit nicely but figuring out the best way of doing supports is tricky. I think i'm opting for the extra print time and printing it vertically as the normal supports made a bit…
For the contest of a cup or trophy trying out new features of Prusa Slicer 2.6 alpha2 (PS) I designed some areas (flat or waved) to apply the cool new feature of text. I designed similar to Printables awards a trophy containing from five…
Unofficial Drybox - Modified B-Pillar with wall mount feature
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
See original model by @huba
This center finder holds a hex shaped pen. It also features a 2mm step stair for drawing straight lines X * 2 mm from the edge.
Introduction to this project: It is a case replacement for the ASRock Deskmini series STX motherboards. I needed a powerful desktop processor and yet in a compact form factor. The original Deskmini case was too large for my liking and did…
Simple Trolley Key With or Without Name Feature. Easy to print.
Set the sundial to 12 o'clock & wait for the sun to come around every day to alert you when it hits the “noon mark”, or set it to sound off at any other time, for that matter, during sunny days. Essentially, this sundial works as a solar…
This custom-designed wall mount securely holds the **Medion HD1* hair dryer using a snap-in mechanism for a firm fit. It allows hands-free use while blow-drying . The mount can be easily attached to the wall using two screws or a strong…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Heyho We would like to plant some raspberries in our kindergarten soon. So while I was out jogging earlier, I thought about how to attach them. And here is the slightly overengineered solution of mine, how to support the plants without…
Switch Dock Cover with the capacity to store some cartilage and hold a controller adaptor I also provide an f3d version of the drawing. You can mode it to fit your needs. Category: Video Games
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A test model mainly indicate first layer quality for moderate printing time exposure, and subsequent effect. Directional indicator record the state of config long after test trail took place. As well as serve as an extra test work load.…
I Designed this Item using Free Cad. It interfaces with a square hole that is 8mm by 10 mm. The ball joint is caught by a double spring steel clip that acts like a socket for the ball. The clip art o the file interfaces nicely with the…
This project aims to provide ams functionality to an A1 Mini without the need for an AMS unit. It uses two nema 17 stepper motors to push and pull back filament quickly. Build instructions and firmware will be added soon on the project's…
A start ramp, doubles, rollers, step up/down, table-top and chequered flags to create your own mini BMX racetrack. Everything is scaled for Tech Deck BMX (and skateboard) but other toys will work too. The features have a recess in the…
Solving multiple issues in my laptop area: Cable management iPhone charging station spot Apple Watch charging station Tissue box Stand for a lamp I printed the stand with 0.3 DRAFT quality. Link to the post .
This is an easy to mount and fast to Print Spool holder. I was looking for an easy to install spoolholder that doesn't harm the filament transport and fits any kind of Spools (for example: Small FlexiSmart spools- Picture 4) The result…
Remix of Japanese Water Feature "Sozu" with pump encased in a box for aesthetics. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: Doesn't Matter Supports: No Infill: see notes Notes: As mentioned in original item, "Gradual on…
![[Option 3 of 3] Flashforge Adventurer (AD5M) Runout Sensor - Bowden PTFE Coupler C-Clip with TETHER to TUBE feature](https://media.printables.com/media/prints/1137299/images/8582387_34919d77-614a-4166-a1b6-7a278797404e_ab9cab1c-6335-4b55-8dc6-2d7b80fe8b9b/2025-01-06-ad5m-bowden-ptfe-coupler-c-clip-option-3-of-3-printables-thumbnail.jpg)
![Jiji - Kiki's Delivery Service (flexi cat - Large) [One-Sided & Shallow Features]](https://media.printables.com/media/prints/596087/images/4747344_8caa5b08-ce5b-4596-8f91-6cb7f1e22603_8e4eafba-c9a4-42e3-a1a3-85d10415dc56/jiji-one-sided-one-sided.png)
![Jiji - Kiki's Delivery Service (flexi cat - Large) [One-Sided & Shallow Features]](https://media.printables.com/media/prints/596094/images/4747368_a84d499d-7d2d-46fe-a955-2d243ed85655_2d845932-2f16-4c0f-89a2-9b5d98beea47/jiji-one-sided-one-sided.png)
