Wyniki wyszukiwania: gin

The Original Dragon Egg - New & Improved for 2025

For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

A *slightly* Overengineered Olpe Vase (print in vase mode!)

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Flexi Sloth - Hook Claws for Hanging!

>> UPDATED VERSION OF THE SLOTH AVAILABLE HERE << The Flexi sloth with hooked claws - hang it from a plant or a string! Or just let it sloth around, your choice. It's adorable both ways. The claws can be snapped into place. The face has…

Hanging Skull Planter - NO SUPPORTS!

Hanging / Sitting Skull Planter - No Supports needed for this model! Designed in Nomad Sculpt you can print and put your favorite plant in there! Two file options - with/without drain hole No Supports are required - similar to printing a…

Gizo the Spider (Original)

Gizo is a cute little spider looking to stir up mischief. This adorable trickster has print in place leg hinges and doesn’t require support. Best of all, it’s a great use for that glow in the dark filament roll that everyone has on the…

Hinged lid for adding MMU2S to Original Prusa Enclosure

Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

"The Original" Octopus Chip Clip

Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop No supports, scale up any size. Seems to work on all size & types of bags. So simple and effective it may surprise you. Want MORE? Visit the CHIP CLIP COLLECTION

Apple Watch Charging Dock (v2)

Minimalistic Dock for Apple Watch - version 2. Suitable for both USB-A and USB-C type chargers. Model was tested with genuine Apple chargers: plastic and metal one. Both have similar diameter which is 27.8mm and 27.7 mm, with the depth of…

2kg spool holder for Original Prusa MK3S+

Printable 2kg spool holder for Original Prusa MK3/S/S+. The spool holder was specially designed for Prusament 2kg, but it can be used for any spools. Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of…

Print-In-Place Beginners Dice Case

I DM for a group of players new to TTRPGs and saw that they tend to need help finding the right die to roll or end up using the wrong ones for their actions. My goal for this case was to reinforce the differences between the dice and to…

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Apple Watch Charging Dock – Built-in Cable Storage

Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. Tidy cable storage inside the dock. Size-specific versions for your Apple Watch. Easy to print without supports. Choose your…

The Original Awesome Bee Feeder! - UPDATED for greater stability

************************ UPDATE 7th February 2023 ************************ Due to requests from some people who have made the Awesome Bee Feeder I have now updated the design to have the bottle holder and base plate combined as one item.…

Hanging Toothpaste Squeezer

Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…

2kg Spool holder for Original Prusa MK4

Printable 2kg spool holder for Original Prusa MK4. The spool holder was specially designed for Orignal Prusa MK4 and Prusament 2kg, but it can be used for any spools. Perimeters: 2 and more, Infill: 30% rectilinear.

Pixel Watch Charging Stand v5

This stand will only work with Pixel Watch 1, for Pixel Watch 2 please use this stand: https://www.printables.com/model/615266-pixel-watch-2-charger-stand This stand includes a cutout to route the wire so it's not visible. For best…

Original Prusa MINI+ Prusament 2 kg spool holder

This MINI+ spool holder was specially designed for Prusament PLA Recycled with a 2 kg spool. It ideally fits for use Prusament 2 kg spools, but it can be used for any spools thanks to adjustable spacing. You will need: 4x screw M3 x 8 mm…

Over Engineered Bubble Pipe w/ Stand

If you wish to be a distinguished gentleman, this is the bubble pipe for you! Created at my brother's request. My goal was to try and make a bubble pipe that could produce larger bubbles, instead of the standard heap of tiny bubbles that…

Pipe Insulation / Lagging Cutting Jig

With this jig you're able to cut insulation made from PE or PU in 45° angles. The model in the picture is made for 50mm insulations, although it looks a bit wide (the insulation seems to be smaller than indicated). But I also added…

Overengineered Bottle Opener and Cap Thrower (OBOCT)

Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…

MagFace - iPhone and Apple Watch MagSafe Charging Station

I wanted a fun and better way to use the MagSafe chargers for my iPhone and Apple Watch, so I designed this! :) Printed on MK3S with painted on supports for hands and top of circle face. 3mf attached is the slicer file with settings and…

A Moderately Overengineered Olpe Vase

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

CHARGING PORT DUST REMOVER - USB-C CLEANER - (Tested)

Also tested with other charging ports Inspired by the box openers

print in place air engine (no suport, no assembly)

I've been working on this engine for quite some time. it is a bit hard to print since the tolerances need to be quite tight. it can be a little hard to break free so have some pasient and a well-tuned machine will help. it can be printed…

Sheet holder for original Prusa Enclosure with Tool Holder

Printable Sheet Holder for your Origginal Prusa Enclosure for 2 or 3 Sheets with one Tool Holder (allen key). Update 01.12.2022: Added a slot to insert a square nut. Square nuts come from spare parts. STL files with the _nut extension.…

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Piercing / Ring holder , display , stand , vagina

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

VW ID.3 (Cupra Born) charging cable hook

*/update: I added two more versions. They are both smaller than the original and have one single solid hook. This makes it stronger and it can be printed without supports, and I never used the hooks individually on the original version.…

Emerging Creepy Hand.

Emerging Creepy Hand. Real Multipurpose this one: it can be bloody, irradiated, frozen. I will put this in the free area. I can see it being made into many things. Looks like it could hold a cell phone as is.

Honeycomb wall organizer (not compatible with the original)

This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…

Simple phone charging port cleaner

A simple small print (takes about 10 minutes) of a small tool used to clean dirt and lint out of the charging port of your phone. If you're like me and keep your phone in your pocket, the charging port is inevitably going to catch some…

34 Snowflake silhouette collection with hanging loops / Kolekce sněhových "obrysových" vloček s očky / Schneeflocken

A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…

Charging Cable Winder Organizer

Includes Hexa, Circles, Triangles and Plain patterns for extra fun. Other versions: Apple Watch charger : Same pattern but for the Apple Watch charging cables Introduction Charging Cable Winder Organizer – the perfect solution for…

Xbox 60mm Noctua Fan Mount Adapter (for Original Xbox)

This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…

Overengineered Frisbee V2

I tried printing a classic frisbee, but I found out, that the standard edges won't be strong and flexible enough (the layer adhesion is too weak when flexed), so I've adjusted them, so that the frisbee is as flexible as possible without…

Cablemanagement Original Prusa Enclosure

I like it tidy, so I designed a cover for the loose cables that are needed for the extensions of the LED strip and the filter system, which can be simply pushed or clipped on by means of a holder. I think this is a neat thing and it also…

Charging Stand for Pixel Watch 2 & 3 - 100% printable - no support

Charging Stand for Pixel Watch 2 & 3 Easy to use with the original charging cable of the Pixel Watch 2 & 3 Note: you'll need to mirror the model for the left wrist, as I wear my watch on my right wrist. Print settings: 2 perimeter 0,2…

Cookie Cutter - Bunny hugging his almond

Not much more to say, you know what a cookie cutter is! But look how cute the bunnies are, they really love their almonds, will you have the heart to eat them? You can even make stopmotion gifs! Please don't eat cute cookie bunnies, make…

Google Pixel Watch 2 Charging Stand

This is made for the new Google Pixel Watch 2 charger. This will not work with the first version Pixel charger. The insert for the charger puck is snug, press firm to seat the puck into the receiver so that it will be steady for placing…

Engine cover bolt caps for E36 BMW

Hello, If you like my design, please like and share it! This is an engine cover nut/bolt cap I made for my 1995 BMW 325i E36. There are 4 caps in the engine bay that clip in once the 2 nuts and 2 bolts are installed for the two-piece…

RYOBI 40V Pass-Thru Charging Adapters

I was pretty disappointed with the RYOBI 1800W Powerstation. It didn't come with MPPT Solar charging or even Pass-Thru charging. I was curious if this was a limitation of the 40V battery or just the Power Station. After some quick tests,…

Fixation for (un)original Prusa drybox on the Prusa enclosure

Fixation for (un)original Prusa drybox on the Prusa enclosure ( slim version available) You need some screw and nuts same one you use in a Prusa kit. 4x M3 nuts 8x M3x6 4x M3x12 -5 Spool rewinder adapter for MMU2S / MMU3 in (un)original…

Slightly over engineered Pull Copter flies over 20 meters

This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…

The original Retractable Purge Mechanism, for MultiColor 3D printing, Replaces purge blocks & wipe towers

Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…

Nothing/CMF watch 2 Pro charging dock/stand

Nothing/CMF watch 2 Pro charging dock/stand

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Radial/rotary engine toy (print in place)

This model can show both a radial engine (rotating crankshaft with a stationary body) and a rotary engine (stationary crankshaft with a rotating body).

Swinging RC Drift Clip - 1/10

IT WORKS! :) After dreaming this up for awhile, I finally got it to work! This is a swinging drift clip. The base and top come together in a 45 degree angle that allows the top to swing back to the straight position after hit. The holes…

Among Us- AirPods Charging Station

This is a little charging station for your AirPods (2nd Gen/Pro). The pegs at the back are to push out the case once the AirPods are charged. Almost all of the pieces are friction fitted, but you can put some glue on the visor and base…

Stringing Retraction test

diameter : first circle:3mm second circle: 5mm square:4x4mm and last random shapes separated by 2mm the whole is 80x20x41mm (without a base 40mm)

MagSafe iPhone, Apple Watch, and Airpods charging stand

Credit for this design goes to https://www.thingiverse.com/jburd/designs and https://www.thingiverse.com/grevtech/designs for adding the cable route organizer. I added another magsafe charging dock on the base for airpods/pro/gen3. Rotate…

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

BallBearing spool holder for (Un)orginal Prusa Drybox

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…

Apple iPhone Magsafe and Apple Watch and AirPods Charging Stand

Charging station designed for holding iPhone with MagSafe, Apple Watch (all models) and AirPods (not pro). No supports needed during printing. I printed with: material: PLA nozzle: 0.4 mm layer height: 0.24 mm (first layer: 0.28 mm)…

Original Bambu Lab auxiliary fan holder for P1P

Print with PLA Support and Brim not necessary (if then use tree support) 15% Infill (for better material stability use gyroid infill) To look better use the Arachne wall generator Thanks for downloading in advance and please don't forget…

Shopping Cart Coin Key - OLV (Overengineered Lightweight Version)

With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…

Cupra Born - Charging Tray Optimized

Based on the idea I found in a German forum, I have created an optimized version of the Qi charging tray for the CUPRA Born. If you are receiving messages that your smartphone cannot be charged by the charging cradle of your Born, this…

Smartphone and Tablet Stand with Charging Cable Support / Handyhalterung und Tablethalterung mit Ladekabelunterstützung

I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…

Original Prusa Enclosure Tool Holder / Original Prusa Gehäuse Werkzeughalter

Yet another tool holder for the Original Prusa Enclosure. Already prepared to be extendable with some holes in the bottom to attach clips for example. If you want to mount it on the left side instead, just mirror it in PrusaSlicer. The…

Headphones - Shokz Opencomm Charging Mount

A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…

Fitbit Charge 5 Charging Stand

Inspired by the Pixel Watch Charging Stand from dtphantom I created a similar design for my FitBit Charge 5. Printed in 0,1mm for a smooth surface. Needs a little support. Update 22.12.22: I added a version with a weight in the base. Just…

Apple Watch Charging Stand

This is a remake of my low-poly Apple Watch charging stand, with a larger diameter and obviously not low-poly. I think this looks much better. For the best finish make sure your seams are aligned to the rear of the model, otherwise using…

M10 screw for (Un)original Prusa Drybox

M10 screw designed for (Un)original Prusa Drybox for F beam in standalone version. The screws were aligned with the holes in the F beam. They prevent air circulation when the standalone version is not used. Print settings: Recomended PETG…

Scandinavian-Designed Portable Purse Holder Hanger Hook - Stylish, 3D Printed, Compact and Durable Hanging Solution

Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…

Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure

Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…

GoPro Battery Organizer for Original GoPro Case

A simple, stylish, and effective ways to organize your batteries inside your GoPro carrying case. If you're like me, you probably like to put your GoPro, batteries, and various accessories inside the original carrying case when you're…

Hanging Smartphone Holder

My wife likes to listen to podcasts in bed, she also often falls asleep and then her smartphone is somewhere in bed. With this holder, she can now prevent this when she puts the smartphone in the holder on the edge of the bed after…

MK3 Original Prusa Enclosure (OPE) Mesh Side Boxes (No MMU Needed) - Deprecated

UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…

Tool box Bambulab P2S original

Hello, Today I have for you the Bambulab P2S original tool box . It is absolutely great for storing the original tools that you get with the P2S. It fits absolutely great and the writing just clicks on, no glue needed. I used PLA/PETG as…

Modified! Piper J-3 Cub for Beginners in Regular PLA!! Check it out!!

For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…

Can packaging (vasemode)

PLA nozzle 0,4 layer height 0,25 vasemode I printed out colored rings for my daughter so she could put together her own version :-) . If there is interest, I will gradually add more textures

Original Prusa XL Skeletton Dwarf Cover Back

Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…

Original Prusa MK3S+/MK4S Spool Holder Adapter for IKEA Lack Enclosure

I wanted to use the original Prusa spool holder with my IKEA enclosure because the original holder has minimal resistance, making it ideal for smooth filament feeding. Previously, I had printed a different spool holder, which functioned…

Ferrite core holder for XP Power external PSU (Original Prusa Enclosure)

Assembly Instructions Set the ferrite core in the holder. Fasten from the back of the frame with screws. To mount the holder you will need the following fasteners: M3x8 screw (2x) Print Instructions print settings: 0.30mm DRAFT filament:…

Original Prusa XL Skeletton Dwarf Board Door

Ich habe das Originale Dwarf Board Door etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser, sodass man hineinsehen kann. Ich habe durch den leichten Gewichtsverlust…

Hanging Gardens of Babylon - Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Garmin Alpha 200i / 100 + Collar T5 / TT15 Charging Station

Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…

Trellis Hanging Lampshade

The inner bracket ring of the lampshade measures 40mm, which should be compatible with most standard hanging E26 light bulb sockets. The lampshade measures roughly 150mm in diameter and 175mm tall. This should print perfectly without…

Adapter for Prusa spool holder, for the Original Prusa Enclosure

This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…

Stringing test with temperature change every 5 mm

Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Original Prusa XL Skeletton Dwarf Cover Base

Ich habe das Originale Dwarf Board Cover Base etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser, sodass man hineinsehen kann. Ich habe durch den leichten…

Raspberry Pi Camera mount for Original Prusa Enclosure

Perfect camera angle! Doesn't block the light from the LED-addon and supports all the official prusa add-ons. Fits the Raspberry Pi Camera V2 Part list PiCameraMount Raspberry Pi Camera V2 (and the cable) M3nS nut (2x) - (Prusa spare…

A one-of-a-kind hanging pot

Hello! This is a project I've been working on for a while. The whole thing started kind of like a thought experiment on how could I make a hanging pot that took advantage of the capacity of 3d printers to make complex organic shapes. The…

Rocket engine

Inspired model from new launch of Prusa CORE ONE which I really liked but was nowhere to download. STEP model was showing some errors, please use the .STL or .3mf file. Step file included for those interested in CFD analysis and so on.…

Original Prusa i3 MK3(S) Dual Color Camo LCD (Multi Material Print)

I saw this idea a long time ago but could never find the files so I decided to create my own Dual Color Camo style LCD for the Original Prusa i3 MK3S's. I think it came out pretty good. The black part looks a bit strange but slicing works…

Original Prusa Enclosure RepBox 2.5 Stand

This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…

Charging cable wind up organiser

This handy cable organiser is perfect for travelling or when you are simply tired of constantly untangling cables. Strengths: sturdy design fits any cable (fits 2m long 4mm thick cables easily) Assembly instructions: insert cable in its…

Original Prusa Enclosure Spool Holder Distance Ring

When you want to utilize the full build volume of your MK4S inside the Original Prusa Enclosure using the original spool holder, there's a high likelihood your tool head will crash with the filament spool at some point. I made this…

Gingy 13 - Flex with Expressions

I'm thrilled to introduce you to Gingy 13, a jointed figure with a personality as sweet as gingerbread itself! Inspired by my collaboration with my wife on her children's book. The book's requirements led me to design a Gingerbread person…

Prusa MK4 bin left for original Prusa enclosure

printed with: Prusament PLA Galaxy Black support necessary

2,5kg Spool Holder for Original Prusa MK4 & MK3S+

Stáhněte si můj model držáku cívek pro 3D tiskárny Original Prusa MK4 a MK3S+ zdarma. Bez problémů se na něj vejdou cívky s filamentem o průměru až 30 cm a hmotností až 2,5 kg.

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Flugzeug mit 4 Triebwerken / Airplane with 4 Engines

Ich wollte ein Spielzeug für mein kind haben was nicht gleich kaputt geht somit habe ich dieses Flugzeug entworfen, gedruckt mit 30% infill und eine 0,4 nozzle klappt der druck perfekt. Das Flugzeug ist fiktiv, frei erfunden über likes…

KO 2 Fader knob - Teenage Engineering EP-133 K.O. II Fader

Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…