Wyniki wyszukiwania: inc

All in One Temperature & Bridging Tower - PLA & PETG GCode included

A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Soap dish, Sponge dryer with drainer. INDX gcode included

The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…

Ideal NASA Chainmail Hex for FDM(STEP included)

This is the ideal Hexagonal NASA Chainmail model for FDM. I increased the thickness of the chain from 1.2~1.5 to 1.8(mm), making it easy to print and more than twice as strong while keeping the size of the original. I designed this to…

Machinist Jack (Parametric Files Included)

Basically this is a long screw and nut that can be used to support pretty much whatever needs supporting. In my case I made this to support my GPU since I noticed some deformation in the PCB from sag. These jacks use a metric trapezoidal…

10 inch Rack 1U : 2 x 3.5 inch HDD - HOT SWAP !

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

M2 - M22 hex-shaped Nuts (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of hex-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe square-shaped…

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Travel Soap Dish, Neat and Compact when traveling and Using (Single colour version also included)

This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…

Project Synthara - Generative Design FPV Drone Frame 3.5 Inch

Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…

Temperature tower with bridging test | PLA GCode included

Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…

Medieval Dragon Embroidered Goblet / Chalice (Game of Thrones / Rennaissance style) Fully Functional and Support Package Included

To All Our Friends & Fans here, we'd like to present a discount code to you all from Printables, get a free 1kg of filament + extra Prusa points by using our code @NightRaid at checkout or by using the links below. @NightRaid or if you…

Can YOU remove the ring??? (includes solution!)

This is a medium-difficulty puzzle that I enjoyed solving many years ago! The goal is to remove the center ring. No force is necessary. I designed it primarily in Fusion 360. I printed it with Reprapper grey and Atomic purple PLA. Note…

pill box for a week - 2 pills a day | incl. fusion-file

English Update 2023-11-02: In the construction file, I removed a few minor errors that occurred when changing the depth. Update: Since PrusaSlicer can now also emboss text, I have added a print configuration file without text. So you can…

Dragon Incense Burner.

Dragon Incense Burner. Make sure to place incense cone atop something non flammable like a large coin. Half dollar works well. This is a finer/detailed version of an older model I made. Suitable for resin printing as well.

Perforated Sink Sponge Holder(s) - Single + Double Sided (15mm or 20mm Pinch)

After looking through a few different models online, I decided to create my own sink sponge holder and include some perforated holes that allow any water to easily drain away from the sponge - preventing moisture build-up . This was…

Porta Sahumerios / Incense stand

Porta Sahumerios, diseñados para 2 tipos de sahumerios, finos y gruesos, ideal para no tirar residuos afuera de la superficie contenedora.

Action Figure Stand for 8-12 inch models

A very simple stand, designed to not obscure your figure very much. Designed specifically for the figure pictured, but a very simple modification to the length of the strut would let you adapt it to any height. You'll need two braces per…

Grinch Christmas ornament for MMU

I have added color to Vlado Turek 's Chrismas ornament in order to print it on my MK3S/MMU2 using PLA: “Yellow-Green”, Red, White, Yellow and Black.

Subaru EJ20 Engine (now with STLs included)

I found the files on Thingiverse and printed them for a friend. It is a working model engine (35% scaled) with parts color-coded... Sort of. It's really cool! This is NOT my original design, it is a make from Thingiverse. I do not know…

Grinch Christmas Ornament - MMU Remix

For those of us who can't paint, I remixed the ornament to a multi-color version. The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little…

pinch valve powered by servo

Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…

5 inch vice soft jaws

These are vise soft jaws designed 5 inch vise There are 4 recesses in the back for 8x3mm magnets. You could use it without magnets or just the 2 on the front face but 4 holds it really nicely to the vise. I used C.A. glue to hold them in…

Quest 3 "Quest Pro" Style Gasket for Increased FOV / Open Periphery

This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…

Cincinnati Bengals Logo

Cincinnati Bengals Logo 1st Layer Orange 2nd White 3rd Black

Printer Toolbox · customizable · step file included

Yet another toolbox for your 3D printing tools. Comes with a .STEP file so you can customize it for your specific tools. There‘s a slot in the front to insert standard sized humidity sensors. The ribs are printed seperately so you can…

Grinch Sign

I'm a Halloween person. I made this little sign to hang on my door so that people stop asking why I haven't decorated.

SHCS (Socket Head Cap Screw) Knob Caps - Inch and Metric - Four Styles - Multiple Sizes

UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…

Snap-fit garden hose connector with 1-inch BSP screw fitting

This is my modelling of a standard snap-fit garden hose connector, combined with a 1-inch BSP screw fitting - as often used to connect to garden water pumps. (Note: the hex bolt for tightening was sized to match the outer diameter of the…

MagDuct Parametric Duct Reducer or Expander (Fusion and OpenSCAD non-MagDuct adapter also included)

Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…

Magnetic Socket Toolbox Organizer Half Inch 1\2"

Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Modular 10 inch rack 2U ITX case + storage mount

I designed this mini-itx case for the 10 inch rack i printed. The tray and the frontpanel are modular so you can remix the frontpanel without printing the whole model again. The case will fit a mini-itx motherboard and 3 2.5" ssds/hdds. I…

7th Gen Intel NUC - 10 Inch Rackmount

Intel NUC Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 6 connectors, in which a keystone…

Magnetic Socket Toolbox Organizer Three Eighth Inch 3\8"

Toolbox socket organizer for 3\8 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Magnetic Socket Toolbox Organizer Quarter Inch 1\4"

Toolbox socket organizer for 1\4 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order…

Tape Dispenser, 3-inch Blue or Shipping Tape

See my new improved version at https://www.prusaprinters.org/prints/74621-tape-dispenser-vers-td3-for-blue-and-shipping-tape A bench mountable tape dispenser for 3-inch wide blue painter's tape. Also works with 2-inch and 1-inch tape.…

Cincinnati Bengals Logo

Cincinnati Bengals Magnet

DJI Osmo Pocket 3 - Stand (including .f3d)

Stand to place your DJI Pocket 3 safely on your desk.

No Touch Tool, retractable, door opener, key turning, pinch papers, push buttons...

I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…

Wingspan Insert including EE&OE

This insert for Wingspan fits the base game, the European Expansion and the Oceania Expansion in the base box. Its a tight fit, but offers still quick setup and a well organized table. The Box closes completely if the backs of the…

Princess Dollhouse Bed

A cute dollhouse bed frame (requires supports) and mattress sized for Sylvania Family and Calico Critters which seems around 1:16 scale. Two piece design makes it easy to ‘make’ the bed.

Duct Flange - Fits 120mm PC Fan Profile and 4 inch AC Duct

Flange that can be mounted onto a 120mm PC fan and then interface with a 4in" AC duct in order to vent heat and fumes outside. I am using thinkingalaud's original model for the flange that faces outside, but needed to remix their model to…

1 inch female quick garden hose adapter / 1" adaptér s vnitřním závitem (pro zahradní hadici)

1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…

🧊 Stable Low-Poly Vase (increased bottom area size)

Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…

Starlink Dishy v2 Winegard (1.5inch) bushing adapter

There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…

Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters

Garden Tap Adapter: 3/4 Inch to M24 for Water Diffusers and Filters Product Description: Introducing the Garden Tap Adapter, designed to convert your 3/4 inch garden tap into a compatible connection for M24 water diffusers and filters.…

5x 3.5 inch drive holder (Hard / Floppy Drive)

Mount for 5 3.5 inch drives I wanted to mount 5 Floppy drives on top of each other to experiment with playing MIDI files trough their stepper motors (See: Floppytron ). While searching for the mounting hole specs I found that these were…

10inch 1U Raspberry Pi with SSD 2.5" rack mount (3 raspberry pi modules and 3 SSD)

Simple and helpful 1U Raspberry Pi with SSD 2.5" rackmount for 10inch network cabinets. It supports 3 Raspberry Pis. How to print: Print with 0.30mm layer height and 70% gyroid infill. Make sure your print is in PETG , ASA , or…

DJI Mavic Air 2 Holder for 8-inch Tablets

The holder should fit most 8-inch tablets. The sunshade is designed for the Apple iPad Mini.

Vintage Sinclair Dino Sign 4 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order Start w/White, Green, Red, Black last. Quick Guide to changing filament~ Have some paper to…

Flip Flop Sandal Summer Earring Set - Gcode included for easy filament change two-tone design, dangle earrings for summer

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…

M3 - M16 Headless Torx Screws in various lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…

HP Elitedesk to 10 inch rack adapter

You need the Bracket and 4xM4 screws

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Stackable Flower Pot including Plant Saucer

05/23/2024: Plant Saucer has been added *************************************************** This model can be print without any support and all parts can be print into a PRUSA MK3S+. For the “Pot spacer”, you could print 2 at the same…

Playmobil castle winch clip (part 3060354)

Replacement part for an old playmobil castle draw bridge winch. Playmobil part number is 3060354. Prints fast and easy, I used PETG for a litte flexibility. Other filament should work as well, though. --- Ersatzteil für die Zugbrücke der…

120mm fan to 3 inch duct

Adapter duct to attach a 120mm fan to 3 inch duct. Made this to use dual 120mm fans on my simrig for movement simulation.

stable Diamant Edition Case/Box incl. Stand for Raspberry PI 3b with applied 3.5" LCD Display (plus option for fan or sensehat)

Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…

Shroud for AMD Instinct MI50 workstation GPU and BA10033B12H BBQ blower fan

Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…

Pinch Nose Clip on Glasses (Pince-nez)

Old style glasses that clips to the wearers nose: https://en.wikipedia.org/wiki/Pince-nez There are many fictional characters known for wearing this kind of glasses, for example Hercule Poirot, Morpheus, Scrooge McDuck and many more. This…

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Replacement Platypus Hose Clamp (Pinch Valve)

We had a hose clamp break on a Platypus water filter. I had one on another filter (black one) to work from, so I designed a replacement to match the original (white one). The textured part was add using paint on fuzzy skin. You can…

Laptop Stand - Macbook Pro (Early 2011 - 13 inch)

Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…

60 Cookie cutters Basic Shapes 2.5cm (0.98 inches)

2.5cm (0.98 inches) The sizes are approximately! Do you need other sizes? Contact us! Please give us a ❤ if you liked the model, so we'll continue uploading interesting .STL! Ask us for custom designs! We are located in Buenos Aires,…

Milwaukee M12 FIWF12 0.5inch impact driver Holder

This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).

F them kids ornament wit grinch

F them kids ornament with grinch flipping middle fingers

Adaptable tray for telescope tripod (diameter 1.5 - 1.75 - 2 inch and 40mm)

Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…

New 360 Degrees Protractor centimetre (cm) And Inch

Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch

Door Cut-Stone 2 inch Arched

I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…

3/4 Female Hose Reduction - Increase the water preasure

Here you go a new design if you dont want to buy a garden hose nozzle, quick 3D print with only 47min. Increase the preasure water Cheap Quick Print that takes 47min Note: Please put a hose seal to prevent leaks in the threads section.

Vintage Sinclair Gasoline Sign 3 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Red, Green Quick Guide to changing filament~ Have some paper to push away extruded…

19.5 Inch Rack Ears (1U, 2U, 3U, 4U)

Printable rack ears with #10-32 tapped holes for 1U, 2U, 3U and 4U sizes to mount rack gear together outside of an enclosure. Also includes files for 1U, 2U and 3U with a leg to lift up the front of the piece of gear. I have a lot of…

6mm / 0.25inch Garden Irrigation Pipe Kink End Cap

If used outdoors print with UV resistant filament, such as Prusament ASA.

magnetic 1/4" hex bit tool / holder for all round magnets (parametric file included)

Summary Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out. Given .3mf file accepts widely used 6x2mm round magnets. Accepts any other sized round magnet (up to 18mm…

OK Play (Cinco Linko) tiles for the Color Blind

Tiles/tokens for OK Play , AKA Cinco Linko , remixed to be easier to use for the color blind. I added a box that holds 15 tiles of each color. I updated the look of the tiles a bit. Support My Work Should you want to, you can support me…

3/4 inch PVC coupler with 2 liter soda fitting for irrigation

Uploaded V2 - better tolerances all around, and significantly shortened the overall length to cut down on plastic A ¾" schedule 40 PVC pipe-coupling that adds a 2 liter soda-bottle (standard US-threads). I created this as a cheap way to…

Window Cut-Stone Arched 2 inch

I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…

Guitar Plectrum (Plektrum) Kit Card with Three Picks (includes STEP file). Keychain compatible

Timeless model of a kit card of three guitar plectra, such as to use it as giveaway for a guitar enthusiast or else. Includes step file to edit, add a name or else. They include a hole for keychain, see my other models for 3D printed key…

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Rain collector for PVC and Zinc

-Englisch- The rain collector consists of 3 parts. Rain collector Sieve Pipe connectors First, push the pipe connector upwards on the rain pipe. Place the prepared rain collector with inserted sieve and 1-inch hose on the PVC pipe and…

1/2 inch BSPT to 1 inch hose connector / fitting

Note BSPT thread, used commonly in Europe. I'd recommend printing with the thread up, to avoid printing horizontally in thin air. Printing like this, use a small brim to increase print stability, no support needed.

Princes Polonie - a historical coin minted in Poland

Princes Polonie is a historical coin minted in Poland by Bolesław the Brave around the year 1000. This model has been donated free of charge to Museum of the First Piasts on Lednica. The model of the coin has been made considerably…

Rope thimbles in 6,8,10 and 12mm, STEP file included

Thimbles are very handy when making end splices. Yet for some reason I always have the wrong size for the type of rope I'm using….. That's why I made a CAD model. I made 4 standard sizes and included a STEP file so you can make your own!…

1.5 inch Schedule 10 Cutout Template For 3-1 Merge

Print in PETG or PLA Different sizes included for different Schedule 10 manufacturer OD's Works well for fabrication of Manifolds or other 3 to 1 intersecting schedule 10 components Use 3D printed template to slide on pipe, and mark for…

Bronze Cast of President Lincoln's Right Hand

Bronze Cast of President Lincoln's Right Hand The Library of Congress has a bronze cast of Abraham Lincoln's right hand, made by Leonard Wells Volk in 1860. The cast depicts Lincoln's hand holding the sawed-off handle of a broomstick,…

2 Inch Netcup for Hydroponics

2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.

Keychain with logo. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota.

Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…

2 inch Sanding Disc Organizer for 6 Grits

An easy way to organize your 2 inch sanding discs. Holds 6 grits.

Test model for 608-zz / 608-2rs ball bearing inclusion

This is a small model to test your printer calibration and tolerance for designs including the classic 608-zz and 608-2rs (22mm x 7mm x 8mm) ball bearings. The inner part can be snap/cut out to test rotation. With my mk3s+, prusament…

Princess Bride Goblet

Princess Bride Goblet. The one with iocane powder in it

Inclusive Sharpie - Clip for people with reduced hand mobility.

No additional parts are needed. I used: Material: PLA Supports: No Layer: 0,2 Nozzle: 0,4 Brim: Optional BUT geometry its printer-friendly so it will be okay if you use other configs. AND its symmetrical so it works on both hands. UPDATE…

Geodesic straw dome incl. lamp adapter and f3d files

Build a dome with straws and these connectors. You can turn your dome into a lamp with the optional adapter. Parts Hemisphere : 10 six-leg connectors, 6 five-leg connectors, 10 four-leg connectors, 35 long straws, and 30 short straws.…

10-24 Nut cropped to fit 1/8 inch slots

I liked SmilingImpact's 10-24 bolt and nut design but needed a nut short enough to fit 1/8 inch (roughly 3.5mm) nut slots. This nut remix is made to be 3mm tall so it fits easily into slotted parts. From testing, 0.1mm layer height is…

Stream Deck Module (32 Keys) Housing for DaVinci Resolve Mini Panel

This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…

The Owl House Police Precinct

This is a model of the Bonesborough Police Precinct from The Owl House. It is 160mm wide, 92mm long and 68mm tall. Print Instructions Printed at 0.2mm layer height. Requires supports on buildplate. If you want to support me, you can do so…

2 inch Modular Hitch Cover with Embedded Nuts

This is a remix of the Modular Trailer Hitch Cover by rkxone on Thingiverse. I've added an additional set of faceplate mounting holes for more options when designing faceplates. The m3 nuts are also embedded in the print. Stop the print…

Blast Gate for 4 inch 100mm sewer pipe

I use this for my dust collection system. I have used one for several month and found it works great. Four ¼ bolts needed, I used hot glue for lock tight on hinge bolt and to seal the pipes. Hot glue can be removed with alcohol. New slide…

XL 90mm/3.5 inch Bias tape maker (for sewing, making double fold straps)

Too much of sewing is pinning and measuring and I get bored easily! I got tired of making double fold straps so I made a giant bias tape maker instead. This is for 90mm/3.5 inch wide fabric strips. This was made using the customizer by…

2 inch Sanding Disc Storage - 7 Grits with Lid

Store your sanding discs easily with this 7 grit (or 6 + mandrel) storage unit. Optional lid makes storing on its edge easy. Printed in PETG but any material should be fine.

Foot for 1.5 inch PVC Pipe Table Leg

This foot is designed to allow you to use 1.5 inch PVC pipe as legs for any project without scratching floors. It was specifically designed for PVC pipe legs for the IKEA Linnmon tabletop, but it can be used to add a foot to any 1.5 inch…