Wyniki wyszukiwania: inland

Sortowanie

163 modeli

P
PrintablesBeaver

(OBSOLETE) Reusable Filament Spool - Inland compatible

Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…

Pobrania
3158
Polubienia
199
Ocena
4,4
P
PrintablesDesignCraft

INLAND Bambu Lab AMS Cardboard Spool Adapter Ring

NOTICE: INLAND PLA+ spools have recently been reported by several users to be slightly larger. If your spool diameter is greater than 199mm please scale the models to 100.6% and leave a comment if this works for you. I don't have a…

Pobrania
2370
Polubienia
148
Ocena
4,88
P
PrintablesEric T

Inland Reusable Filament Spool v2

Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…

Pobrania
1995
Polubienia
154
Ocena
4,73
P
PrintablesJKtech3D

Overture and Inland Cardboard Spool Adapter for Bambu Lab AMS

Remixed the original cardboard spool adapter design to secure to the spool utilizing the holes using a press fit design. It is also clipless to allow for easier removal and should be appropriately sized to apply enough friction on the…

Pobrania
1182
Polubienia
98
Ocena
4,67
P
PrintablesReProps

Thorfin's Daggers Vinland Saga

Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props

Pobrania
1079
Polubienia
72
Ocena
4,5
P
PrintablesEric T

Inland Reusable Filament Spool

Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…

Pobrania
794
Polubienia
55
Ocena
4,83
P
PrintablesMiniWorld3D

Helsinki Cathedral - Finland

🇫🇮 Tervetuloa Helsinkiin! Welcome to Finland! This model was designed by Dany Sánchez with optimizations by Jukka Seppänen @kijaidesign . The idea of MiniWorld3D came to creator Dany Sánchez after a Finnish friend who asked if 3D printing…

Pobrania
773
Polubienia
103
Ocena
5
P
PrintablesBavly Hanna

Inland 2.5" SATA SSD enclosure

Just a quick enclosure I made for this Inland SSD I wanted to put in an ITX case and take up a little bit less room. Not sure what other SSDs it would work with. Maybe someone will find use for it.

Pobrania
625
Polubienia
51
Ocena
4
P
Printablesmr-neutron

Reusable master spool for Inland or eSUN spooless filament

Reloadable master spool with 90mm center hub and 60mm flange spacing. This spool design appealed to me because it was threaded and used less filament than other reloadable spool designs I saw. When I printed it out as-is, I discovered…

Pobrania
500
Polubienia
37
Ocena
5
P
Printableskcns

Bambu Lab Reusable Spool Holder Inland Remix

Fits Inland spoolless filament snugly without slipping. Width has also been adjusted to match inland sizes This is the version with the locking mechanism that works in Bambu AMS without unraveling I printed it with 0.2mm layer height, no…

Pobrania
494
Polubienia
46
Ocena
5
P
PrintablesBYO-SD

Rings for Inland Filament

**NEW** : The Universal Ring works on ALL Inland cardboard spools, but the AMS will not operate properly unless it is propped open and resting on its locking tabs. Instructions for using Universal Ring: 1) Align long oval in the Universal…

Pobrania
465
Polubienia
30
Ocena
4,5
P
PrintablesLee David

Filament Refill Spacer for Bambu Spools and Inland Refills

Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.

Pobrania
449
Polubienia
65
Ocena
4,67
P
PrintablesMaryo Tech

Bambu Labs Spool Insert (Designed for Inland Spooless Filament)

This was created to fit on the Bambu Labs spools that came with my P1P and AMS. I normally by Inland filament from Microcenter. I wanted to try and use their spooless filament as it is $2 cheaper per roll of PLA+. The fit of these rolls…

Pobrania
356
Polubienia
32
Ocena
5
P
PrintablesBRE3DLOVE

Cardboard Spool Adapter | Fits various brands | Overture, Elegoo, Creality, Inland, RongTong, & more | AMS

Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/190120 The print settings in the print profiles have been tested. PLA prints in 16 minutes & PETG in 18 minutes. ==== Protect…

Pobrania
343
Polubienia
37
Ocena
4,5
P
PrintablesMicro Center

Inland Filament Cardboard Ring for Spool

“Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer.” STL…

Pobrania
281
Polubienia
50
Ocena
5
P
Printablesthetable

Inland IR Camera Housing for Raspberry Pi

Housing for Inland IR Night Vision 1080p camera with IR illuminators for Raspberry Pi. May work for other cameras with IR illuminators, but I've only used it on my Inland. Designed to be used with GoPro mount. Needs to be printed with…

Pobrania
277
Polubienia
26
Ocena
5
P
PrintablesMrRadman11

Inland cardboard spool adapter for Bambu Lab reusable spools

The original make was great, but didn't fit the cardboard Inland spools (which are slightly smaller than the spooless ones). I have quite a few of the cardboard ones and wanted an easy way to quickly convert them to a Bambu Lab reusable…

Pobrania
274
Polubienia
28
Ocena
4
P
PrintablesDauntless

Inland 1kg Filament Spool Model

For a mini-project I was doing, I needed an Inland spool model, but couldn't find one. It seems models of different brand spools are hard to come by, so I'll do my part in remedying the issue. Enjoy!

Pobrania
270
Polubienia
6
Ocena
0
P
Printablesxaudiblex

Bambu Labs - AMS Filament Guide (Inland refills w/ Bambu Spool & Sunlu Spools)

Background I kept on experiencing the dreaded "AMS assist is motor overloaded" error when I used certain filaments (Inland spools, Inland refills with Bambu spools, and sometimes with Sunlu spools). I noticed that the filament would get…

Pobrania
250
Polubienia
46
Ocena
0
P
PrintablesFlying Bonanza

Inland ReUsable Filament Spool

This is a remix of https://www.thingiverse.com/thing:3938005 increased the tolerance of the main inner threads for easy on / off removed the chamfers around each of the cutouts A reusable filament spool designed to work with eSun and…

Pobrania
247
Polubienia
16
Ocena
5
P
PrintablesPendingPeril

Inland Reusable Filament Spool Compatible with Bambu Lab AMS

I had to buy some spooless filament from Microcenter out of necessity, but spools that fit and worked in the AMS were lacking. I liked this original spool the best because the chamfered edges were removed, so the edges have more surface…

Pobrania
233
Polubienia
21
Ocena
0
P
Printableswookiearocket

Inland Spoolless Filament to Bambulab Adapter Spacer

a reasonably efficient adapter for using Microcenter's Inland branded filament refills on a Bambulab spool. as Inland refills are slightly narrower than the Banbulab ones, the filament does have a tendency to become a bit messy but still…

Pobrania
224
Polubienia
22
Ocena
5
P
Printablesaddohm

Inland or eSun Spoolless Filament Spool

Remixed to the hex style to allow better visibility of filament and label integrated. No need to choose.

Pobrania
218
Polubienia
19
Ocena
5
P
PrintablesPapahtaja

Topographical map of Finland

Map of continental Finland with topographical information. Elevation data was magnified quite a lot to make the differences more visible. Print instructions Instructions to make the model:…

Pobrania
211
Polubienia
12
Ocena
4,33
P
PrintablesAddoh

Inland ESP32-WROOM-32D Case

Designed around the Inland ESP32-WROOM-32D using Tinkercad. Includes spacing to read labels for pins, LED cutout, and printable buttons. USB cutout works with the 2 usb cables i tested and is tuned to be relatively flush, but may require…

Pobrania
209
Polubienia
11
Ocena
5
P
Printablesbgreat

Cardboard Spool Rim Only - Remix for Inland ABS and PETG Cardboard Spools

Edge rim only for cardboard spools. This is a quick remix to fit for the Inland ABS and PETG cardboard spools. I recommend printing in PETG. It is strong and flexible for this installation. I'm not certain PLA would work without breaking…

Pobrania
206
Polubienia
29
Ocena
5
P
PrintablesLee David

Inland Filament Refill Spacer for Bambu Refill Spool

I purchase refills when ever I can find them at a fair price. I wanted a better spacer for Inland refills. I keyed the spacer to line up with Bambu's notch in the refill spool. I printed out of Prusament ASA (free from printables.com) and…

Pobrania
205
Polubienia
26
Ocena
5
P
PrintablesZan Hecht

Inland 3.5" TFT LCD Mount for Raspberry Pi Armor Case

This is a frame for mounting the Inland 3.5 Inch TFT LCD Touch Screen Monitor on a Raspberry Pi 3b or 4 using an “Armor” style case such as this or this (there are lots of generic ones on eBay/Aliexpress as well). It also covers the GPIO…

Pobrania
179
Polubienia
12
Ocena
5
P
Printablesespn8-theocho

Anycubic Autofill Adapter for Inland/Esun/Yousu resin

Fit your larger Inland/esun/yousu bottles in the Anycubic M3 lines autofill cap. took me quite a few versions of printing and testing to dial things in how i wanted them but it works great!

Pobrania
144
Polubienia
13
Ocena
5
P

Inland PolyMaker Cardboard Ring for Spool

Important - resize to 100.75 in Prusaslicer for Inland PLA. This then snaps on around it. This is a simple rim. Print in PETG .25 layer height. You might also try 100.65 resize for a little tighter fit and see which one you prefer. 100.65…

Pobrania
143
Polubienia
11
Ocena
0
P
Printablesscott

Inner ring to fit Inland filament carboard reels snugly on Bambu Lab Reusable Spool Holder Remix Four

I printed several Bambu Lab Reusable Spool Holder Remix Four, I tried putting a roll of Inland filament on the spool by removing the cardboard ends of the Inland spool, but the hole was a little bigger than the printed spool, so I used…

Pobrania
140
Polubienia
23
Ocena
0
P
PrintablesOkcazure

Inland Filament clip

Since I primarily use Micro center “Inland” filament, these clips fit the two types I've run across with PETG and PLA filament. The OpenSCAD file is attached so you can easily modfy for other filament. If you don't know how let me know…

Pobrania
138
Polubienia
14
Ocena
0
P
PrintablesWayne Erman

Inland and eSun reusable filament spool

I could not find a decent reusable spool for Inland or eSun spoolless filament so I designed this one. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Inland PLA+ Any Notes: I final printed…

Pobrania
137
Polubienia
16
Ocena
3
P
PrintablesZs0lt

Filament clip for Inland (MicroCenter) filament spools

This is a filament clip specially designed for Inland (sold in MicroCenters) 1.75 mm filament (1 kg) spools. UPDATE: If the spool is very full, the filament tends to stuck into the clip during printing (if you don't remove it). The r2 now…

Pobrania
124
Polubienia
2
Ocena
4
P
PrintablesBrett Hampton

Inland Cardboard Spool Replacement

I really like that Inland filament has moved over to cardboard spools. I got tired of throwing away plastic ones and cardboard spools work great on my Ender 3 printers with a center hole filament holder. I recently got a Bambu Lab X1…

Pobrania
122
Polubienia
11
Ocena
0
P
PrintablesThyristor

INLAND cardboard adapter spool

In order to use INLAND cardboard spools in the AMS, the CBAS series has been expanded. The spool needs around 158 grams of filament with 15% infill, making it not lightweight but rather sturdy and smooth-running. So far it has always fit…

Pobrania
122
Polubienia
13
Ocena
5
P
PrintablesMechProne

Inland PETG Spool Ring for Bambu AMS (Fits 199mm cardboard spools)

Received some spools of Inland PETG (199mm) today and needed some spool rings for them. Added a slight ring to keep it in place and sized to snap on.

Pobrania
117
Polubienia
10
Ocena
5
P
PrintablesSpectreGadget

Bambu Lab Spool Spacer for Inland

This really helps as the Inland refills are narrower and the core doesn't stay put on the Bambu Lab spools. I made it solid to print without top/bottom layers to speed it up and use a little less filament. The .3MF file has the settings I…

Pobrania
112
Polubienia
17
Ocena
5
P
PrintablesMathoose

Thorfinn Avenge Thors Manga Panel - Vinland Saga - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Pobrania
111
Polubienia
27
Ocena
5
P
PrintablesDonut

Inland Cardboard Spool Adapter

If you shop at Microcenter like I do, these are a nice addition to help your cardboard spools spin. (Can Possibly Fit Other Spools) Print Settings: Layer Height: .2mm Walls: 3 Top/Bottom Layers: 4 Infill: 10% (no need for more) Supports:…

Pobrania
111
Polubienia
14
Ocena
5
P
PrintablesSquank

Protective box for Inland DHT11 Temperature and Humidity Sensor

Simple sliding lid box that will hold the DHT11 temperature and humidity sensor securely with strain relief for the connector. There is a tabbed version for hanging and an untabbed version for sticking to things or just having a smaller…

Pobrania
105
Polubienia
6
Ocena
0
P
PrintablesAnson Liu

China Mainland/Hainan/Taiwan 3D Topo Relief Map with Streams and Lakes

See recommended 3D print settings , release notes , and map details on the project website . This model is designed for the final product to be either displayed between 25-100% scale. If your slicer loads the model but is unable to slice,…

Pobrania
104
Polubienia
9
Ocena
0
P
PrintablesFIN245

Coat of arms of Finland

The coat of arms of Finland that can be printed in one or multi-color.

Pobrania
93
Polubienia
6
Ocena
0
P
PrintablesSukaByat21

Microcenter's Inland Printable Spool for spool-less filament

I frequently get my filament from a Microcenter, and they sell spool-less filament for a little cheaper. I wanted to print a spool for the roll of cardboard cylinders to fit on, but the ones I found were too big. After taking inspiration…

Pobrania
89
Polubienia
6
Ocena
0
P
Printablesphilips98

Sweden / Denmark / Finland flag coaster

A flag coaster, printed in multicolor on Bambu P1S Layer height: 0.2mm Infill: 15%

Pobrania
88
Polubienia
8
Ocena
5
P
PrintablesAmazing3D

Inland Reusable Spool

This is a master spool designed to be used with the inland spooless filament. It is held together with 6 x 6-32 machine screws and the accompanying nut. I used 3/4" however anything down to a 1/2" (~11mm) screw should work. Category: 3D…

Pobrania
84
Polubienia
12
Ocena
0
P
PrintablesDirk C

Wappen Rheinland-Pfalz

Ich habe das Modell anhand einer JPG in Onshape erstellt. Gedruckt in PLA. Kann durch angepasste Farbwechsel sicher noch schöner gedruckt werden.

Pobrania
79
Polubienia
4
Ocena
0
P
PrintablesMicro Center

Inland Filament Spool Holder

Inland Filament Spool Holder Inland Filament: Light Blue PLA Light Blue PLA on Amazon Printer Settings: Nozzle- 215° Bed- 60° No Supports 10% Infill Print time- 3 hours Default Creality K1 profile used Printer Used: Creality K1 STL…

Pobrania
78
Polubienia
20
Ocena
0
P
PrintablesMathoose

Thors "You have no enemies" - Vinland Saga - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Pobrania
61
Polubienia
12
Ocena
0
P
PrintablesKillerKreationz

Inland Reusable Filament Spool w/ Filament Holes

I loved the original model I just wanted holes in it

Pobrania
60
Polubienia
7
Ocena
0
P
Printablesgnat

Refillable Reused Inland Spool

I've collected many empty spools over the years to keep them out of the landfill, but I've never had a plan for them. Recently I found that Inland (my goto filament) has expanded their spooless refill offerings to include more colors, so…

Pobrania
58
Polubienia
16
Ocena
5
P
Printablesfpvgio

Inland Reusable Spool: Press-fit

Press fit reusable spool for Microcenter's Inland Filament (1.75mm). The outer diameter of Half A's shaft is 90mm. As of May 9th 2023 that (90mm) is just shy of the inner diameter of the cardboard tube Inland's spool-less filament sits…

Pobrania
57
Polubienia
0
Ocena
0
P
Printablesrdar

Inland Spool Refill - AMS and Snapmaker U1 Spool Holder Friendly

Pretty standard print. I used PETG. No supports needed. 2-3 walls and 10-20% infill should be fine.

Pobrania
55
Polubienia
8
Ocena
0
P
PrintablesGallaghersArt

Inland Cardboard roller spool

These new Cardboard rolls are good in some ways, but I can not use these on my Filament Rollers. Insert 2 of these per s

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesHabLab

Finland ("Suomi") Map 2D Art

Geographically accurate Map of Finland, easy and fast print. Multicolored by Filament Change.

Pobrania
53
Polubienia
6
Ocena
0
P
PrintablesORC

Inland cardboard spool ring

Printing a lot of TPU and got frustrated with the weaker motor on one of my printers. Made these rings to help it roll better in my SunLu dryer. It takes 2 prints to make a set for a spool. Should not require any supports. If using it in…

Pobrania
53
Polubienia
12
Ocena
0
P
Printablesevil genius

Inland Master Spool

I got tired of master spools for my Inland spoolless PLA that had a "part a" "side b" type thing going on, so here is one that you just print 2 of the same part and join with 3 m4x55 screws. Print Settings Printer Brand: TEVO Printer:…

Pobrania
52
Polubienia
5
Ocena
0
P
PrintablesZorro3355

Inland DB 100 Bandsaw saw guide

Saw blade guide for Inland DB 100 bandsaw designed for better drainage . Print in PETG Or ABS 100% infill

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesBlueDragyn

Temp Tower - Inland Luminous PLA

Simple temp tower for glow in the dark filament made by Inland. Created using this customizer: https://www.thingiverse.com/apps/customizer/run?thing_id=2922338 Settings used: do_you_understand = 1 tower_stories = 4…

Pobrania
51
Polubienia
0
Ocena
0
P
PrintablesCircuitCyborg

Inland/Cardboard Spool Style Filament Clip

Great for keeping your filament spool wound. Only uses about 1 gram of filament per clip.

Pobrania
51
Polubienia
4
Ocena
5
P
PrintablesBlademonkey

Inland to Bambu Lab Hub Adapter for AMS usage.

I created a spacer/adapter model that will grip onto the inside of the Inland Spool core and mate with the BL spool such that it fits over the Spool notch.

Pobrania
51
Polubienia
4
Ocena
0
P
Printablesautumninfj

Inland USB3.0 7-Port Hub Desktop Mounting Bracket

This bracket fits over the Inland USB3.0 7-Port Hub (Model 401323) to hold it in place on top of a desk, using one screw on each side to fasten it to the surface. I use this on my project workbench to keep the hub where it belongs, even…

Pobrania
48
Polubienia
4
Ocena
4
P

Spool Bearing Hub: 54.3 hub diameter for Polymaker, Inland, and Hatchbox

This is a center spool hub made specifically for 54.3 cardboard spools, as it fits them exactly. It fits the Polymaker brand cardboard spools and one variation even has their logo on it. It fits Inland cardboard spools (many of which I…

Pobrania
47
Polubienia
6
Ocena
4
P
PrintablesJLes

Inland PLA/PLA+ Spool Adapters (FreeCAD)

Know your spool dimensions before printing. In my experience Inland PLA+ spools measure 53.5mm and PLA 54.5mm. Models are designed “over sized” 1.5mm compared to spool diameter for snug press fit. Model is parametric, adjust as needed.…

Pobrania
47
Polubienia
5
Ocena
0
P
PrintablesErich Schultz

Inland spool drawer

I have some empty Inland spools laying around and I thought I had seen someone make containers that used spool holders but I couldn't remember where. Since I like to design simple things I decided I'd just design my own to go with these…

Pobrania
41
Polubienia
6
Ocena
5
P
PrintablesBooks

Empty Filament Spool - Microcenter Inland PLA

A model of an empty Inland PLA filament spool from Microcenter. Model not intended for printing, mostly for exploring the re-use possibilities with a filament spool of these dimensions.

Pobrania
41
Polubienia
5
Ocena
0
P
PrintablesJesusUnoWTF

Internal Spool Desiccant Packet Holder - Inland

I designed this internal desiccant holder so that my spool can make use of desiccant packets while drying in my filament dryer (a Sunlu S2). This is mostly a proof of concept, as I have yet to determine if this is effective or not, but…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesRyan Roberts

Inland Reusable Filament Spool v2 - Small Format Printer

I wanted to use spooless filament but my print bed is only 150mm x 150mm. I liked that the previous design did not require hardware so I cut it down to fit on my 150 x 150 printbed since the corners will still allow the full 8" diameter.…

Pobrania
39
Polubienia
1
Ocena
0

inland Spool Adaptor

Spool adaptor to replace the cardboard sides of inland spools for use in AMS

Pobrania
39
Polubienia
4
Ocena
0

Inland Cardboard Desiccant Weight

Light weight spools sometimes bind in AMS. Add weight to spool with dessiccant, solve weight problem & keep AMS dry as bonus. These have been optimized for minimal plastic use and produce a very snug fit. Maybe too snug, some light…

Pobrania
38
Polubienia
6
Ocena
0
P
PrintablesKovacs Tunde

Finland Hockey team logo

This is a wall hanging logo. size: 200x180x20 infill: 15% layer height: 0.2 no support Like and visit my page if you like this!

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesDavid

Filament Spool Re-use Coupler (Inland)

Wanted to start doing something useful with my old spools of filament. So designed this to cut and reuse the spools. Just have to cut spool, epoxy two parts and wait to dry.

Pobrania
33
Polubienia
7
Ocena
0
P
Printablesnixkor

Inland ic210 Keyboard Foot/Leg/Stand

Inland ic210 USB Keyboard Foot Replacement foot for Inland ic210 USB keyboard. They also make an ic210 wireless keyboard so YMMV if that is what you have. Printed in PETG-CF with 0.8mm nozzle - not the cleanest print but it's functional.…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesOn The Spot

Inland Adapter for RepWinder

Due to local availability, I get a lot of Inland brand filament. Other times I'm using Prusament. Because of the winding direction of the Inland spools, the recessed end of the spool is on the wrong side for the RepWinder 15mm spacer.…

Pobrania
30
Polubienia
0
Ocena
0
P
PrintablesSanciio

Sweden / Denmark / Finland Keychain

Charming house-shaped keychain , perfect for Denmark, Finland, and Sweden . This practical design can be easily printed, making it an ideal accessory or gift that reflects Nordic simplicity and style. 0.2mm layer, 2 walls, 15% infill. The…

Pobrania
29
Polubienia
4
Ocena
5
P
Printablesgreen

Planck Style Keyboard Case and Lid for Inland MK47

This is a custom keyboard case I made based on the Planck style cases but made to fit the insides of the Inland MK47 . I printed the one featured in the photos at 0.16mm height with 4 walls using Bambu Matte filament. The photos show v1…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesNunya Bidness

HSW Inland Blower Holder

Threw this together real quick to hold my inland blower

Pobrania
29
Polubienia
21
Ocena
0
P
PrintablesTravis G.

Inland reusable spool

I never seem to have enough spools to put new color filament on. Instead of buying them I just decided I would print them as needed. This spool is designed to work with the Inland Spoolless filament. The spool core diameter is 3.6 inches.…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesKejar31

Masterspool Spacer 92mm for Inland Masterspools

Simple spacer for Lance Greens MasterSpool to fit Inland filament

Pobrania
28
Polubienia
2
Ocena
3
P
PrintablesMathoose

Thorfinn Punch Vinland Saga Manga Panel - made w/ HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesChristian

Inland FTDI Model

Crude model of an Inland FTDI. Used to make a case. https://www.microcenter.com/product/656323/inland-ftdi-adapter-usb-controller

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesGreenhat

Inland Spoolless Filament Adapter for Bambu AMS

I encountered an issue with my Inland Spoolless PLA+ Filament—it was too large to fit properly onto the reusable Bambu AMS spools. This caused errors during retraction as the AMS system couldn’t respool the filament correctly. To solve…

Pobrania
25
Polubienia
2
Ocena
0
P
PrintablesMicro Center

Inland 3D Printer Nozzle Pen Holder

Inland 3D Printer Nozzle Pen Holder Filament Used: Inland Copper Silk Inland Copper Silk on Amazon Printer Settings: Print Time: 7h 14m Print Temp: 230°C Bed Temp: 60°C 240mm/s No Supports .2 layer height STL designed by dsk001_3d

Pobrania
24
Polubienia
11
Ocena
0
P
PrintablesAnkgeuz

Finland Sauna Doorhanger

Sauna doorhanger should work and print fine. Tell me if there are any mistakes.

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesDavidP730

New Inland 1.75mm Filament Spool Clip

It looks like the Inland filament spool changed since the original clip was created. This design just removed 3mm of the 'clip' end so that it fits more snugly on the spool. Category: 3D Printer Accessories

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesFearless

Inland/eSun Masterspool with bearing

Using the center Hub from @anachronist excellent Scad file, I designed this masterspool to be used with Spooless Inland Filament available at MicroCenter (I understand eSun uses the same size hub but have not been able to test one). This…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesMicro Center

Inland Filament Ghost Keychain

Inland Filament Ghost Keychain Inland Filament Used: Red PLA Printer Settings: Nozzle Temp: 230° Bed Temp: 45° No Supports 20% Infill Print Time: 28 Minutes Speed: 300mm/s Measures 3.25" L x 1.5" W Printer Used: Creality K1

Pobrania
21
Polubienia
5
Ocena
0
P
PrintablesVojtaman

Finland Flag

Finland Flag :D

Pobrania
20
Polubienia
1
Ocena
0
P
Printableschrkle

Creality CR-10 New Inland Spool Adapter

This is a spool holder insert for my Creality CR-10 for the new inland spools coming from Microcenter. These new spools have a different diameter than the old spools. I was using the https://www.thingiverse.com/thing:2251431 previously by…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesJanet

Miter box for Inland Spool

I didn't have the blade that was used in the holder. But I have a saw so I used the holder to create a miter box.

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesMathoose

Vinland Saga Manga Panel

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 3.5 Swap…

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesAsa Parker

Center Axle for InLand Cardboard Spool

Printer: Ender 3 s1 w/Sonic Pad Material: PLA Print Temps: 205 & 70 Nozzle size: 4mm Layer height: 2mm (Good Quality) Speed: 100mm p/s Supports: NO Bed Adhesion: NO This is a very simple Bearing Axel to be used with the Cradle support…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesAsa Parker

Center Axle for Inland Filament spools

This is a New and Improved design of the Inland Filament spool Axle I previously made. MUCH STRONGER, and again: NO SUPPORTS, NO BRIMS. Simply set your strengths and print! I have printed mine on the K1 MAX and on the Ender 3 V3 with the…

Pobrania
18
Polubienia
0
Ocena
0
P
Printablesgreen

V4N4G0N Style Keyboard Case for Inland MK47

This is a custom keyboard case I made based on the V4N4G0N style case but made to fit the insides of the Inland MK47 . I printed the one featured in the photos at 0.16mm height in Bambu Matte and Bambu Silk+ PLA filaments. I imported all…

Pobrania
18
Polubienia
5
Ocena
0
P
Printablesxeemz

Inland Cardboard Spool Adapter for Filament Storage 2026

Dimensions used: Spool Hole Diameter: 53.5 Spool Width: 64.8 Key: CB = Cardboard PC = Plastic Closed Center Hub PO = Plastic Open Center Hub RS = Reusable Spool 3D = 3D Printed Spool Print settings: .20mm Structural Infill: Gyroid…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesBnackus

Inland (microcenter) M.2 Drive Customizable Case

Replacement sleeves for these usbc drives. a blank one is included so you can customize it yourself.

Pobrania
18
Polubienia
1
Ocena
0
P
Printableskbob

Window Cap for Inland filament boxes

Inland brand filament comes in cardboard boxes with a large hexagonal window in one side. This cap plugs the hole so you can reuse the box to store things. Or just cover your filament. The cap uses an open infill pattern to show off the…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesRjHei

Inland Cardboard Spool Adaptor for USS Drybox

adapts micro center brand inland cardboard spools to USS Drybox. I have also tested it with bamboo labs refill spools and it seamed to improve the rolling resistance. 54mm OD. Inspiration from:

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesAnkgeuz

Finland styled keycap

Finland keycap remixed from: https://www.printables.com/model/1067275-blank-keycap

Pobrania
16
Polubienia
8
Ocena
0